Well here they are with some incomplete labeling on my part. (Possibly mislabeled)
##778# - EPST - Advanced Programming
##786# - EPST - Reverse Logistic
##4772579# - RESETs
##37872# - Full Speed USB Mode - Enable/Disable
##8626337# - EPST/Vocoder -
##2539# - EPST/A-Key - Authentication Key
##7738# - EPST/P_Rev - Protocol Revision
##3282# - EPST - Basic Programming
##775# - EPST/PRL - PRL Settings
##3386# - DDTM - Enable/Disable
##33284# - Debug - FieldTrial Debug Info
##3424# - DMR - PORT INFO
I found what I believe to be every code available on the Touch Pro as there were no others listed in the folder that handles these codes! If you'd like to snoop the folder yourself go to HKLM\Services\PhoneExt\KeyProgram
It's amazing what you can find when you're bored!
I believe these are the same for the Diamond also.
If you find these useful please donate...Oh wait never mind I have nowhere to donate too! Have Fun, Be Safe, and most of all ALWAYS backup your data!
What would the full speed usb mode do if you enable it?
I've tried them in the dialer but they dont work???
::::EDIT::::
Got it to work
for my Provider
its only "##Code" Then Talk no # after the code the code
Im not exactly sure what the high speed usb code does but i know it disabled all sound from my headphones, so i disabled it again.
The High Speed USB mode basicaly turns your phone into a flash drive, the phone can no longer see the memory card in it with the OS, and the normal functions your used to in your USB port don't work any more ( why your head phones quit working ). Turn it on when you want to transfer lots of data quickly, turn it of when you want the phone back to normal =)..
stevopativo said:
Well here they are with some incomplete labeling on my part. (Possibly mislabeled)
##778# - EPST - Advanced Programming
##786# - EPST - Reverse Logistic
##4772579# - RESETs
##37872# - Full Speed USB Mode - Enable/Disable
##8626337# - EPST/Vocoder -
##2539# - EPST/A-Key - Authentication Key
##7738# - EPST/P_Rev - Protocol Revision
##3282# - EPST - Basic Programming
##775# - EPST/PRL - PRL Settings
##3386# - DDTM - Enable/Disable
##33284# - Debug - FieldTrial Debug Info
##3424# - DMR - PORT INFO
I found what I believe to be every code available on the Touch Pro as there were no others listed in the folder that handles these codes! If you'd like to snoop the folder yourself go to HKLM\Services\PhoneExt\KeyProgram
It's amazing what you can find when you're bored!
I believe these are the same for the Diamond also.
If you find these useful please donate...Oh wait never mind I have nowhere to donate too! Have Fun, Be Safe, and most of all ALWAYS backup your data!
Click to expand...
Click to collapse
##778# - EPST - Advanced Programming
that really is to reset settings
##786# - EPST - Reverse Logistic
aka RTN aka hard reset
##3282# - EPST - Basic Programming
very important Data programming
##33284# - Debug - FieldTrial Debug Info
good for messing around with advance settings
(not for beginners can mess up phone badly and end up with a hard reset)
this works with every sprint phone form the lg lx160 to the ****ty Samsung instink
which one is the code that lets u see whether the phone is refurbished or not?
Just dial ##778# then hit view and scroll down to Refurbishment Status it should say "No" which means it hasnt been refurbished
Anyone know how to get these codes to work on a USC phone? (TP)
Doesn't matter if I hit ##code# or ##code send, it just wants to dial that number... Got my curiosity up.
Oh yea,, totally box stock phone with the HTC 6-09 rom update.
Some of them are only for Sprint I think, but if it is unlocked, the rest should work.
Oooops found 1 more ##wimax# froyo2.2
phone codes
thanks guys i was looking for these and happened upon your post
Related
For those interested in using these here you go
These were pulled straight from the EVO 4G forum and thanks goes to webs05
Tested/Working:
##775# - EPST/PRL - PRL Settings
##786# - EPST - Status Menu
##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##33284# - Debug - Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)
##3424# - Diagnostic - Connect to phone in diag mode
##2539# - EPST/A-Key - Data A key menu
##7738# - EPST/P_Rev - Protocol Revision
##8626337# - EPST/Vocoder - Unsure
##4772579# - Reset the GPS
##72786# - changes DSA back to Factory
##889# - enables TTY ----- Was only able to get the following working on CM6 Rom -----*#*#4636#*#* - Phone Information -"Phone information, Battery information, Battery history, Useage statistics, Wifi information"
Confirmed not Working:
##UPST# - modem directory
##778# - EPST - Advanced Programming
Unverified:
##37872# - Full Speed USB Mode - Enable/Disable
##3386# - DDTM - Enable/Disable
*#0*# - Test Utility -
SAFE TO PLAY WITH
*#0011# Service menu
*#0228# Battery Status
*#0283# Receiver Packet loopback
*#0289# Melody Test again?
*#0673# Melody Test SAFE TO PLAY WITH
*#0782# RTCTimeRead displays time (and seconds)
*#0842# Vibration test SAFE TO PLAY WITH
*#147852# Allows you to access many screens including CDMA DATA Connections
*#1472365# GPS Setup
*#1575# Service menu
*#197328640# Service menu
*#2263# ??
*#232331# Bluetooth RF Test Mode
*#2454# Low Battery Power Off
*#2580# Service menu
*#2663# Touchscreen Accuracy Test SAFE TO PLAY WITH
*#2664# Touchscreen Firmware Version
*#2664# Main Firmware Update
*#2767*2878# Service menu
*#32489# Service menu
*#3264# RAM Version
*#3282*727336*# Current Data State
*#369852# Allows you to access many screens including CDMA DATA Connections
*#4238378# Service menu
*#6984125*# Service menu
*#7284# Service menu
*#745# Sec_RIL_Dump allows you to copy to phone memory, clear ril log, (greyed out copy to SDcard and view RIL log), exit
*#7450# Phone Dump Mode Disable
*#7451# Phone Dump Mode Enable
*#767*3855# Factory Format – CRAP!! WARNING!!!
*#7780# Factory Reset
*#9090# Service menu
*#9900# SysDump copy logcat/dumpstate/dumpsys, enable debug log, copy watchdogdumpstatelog)
THEGAMEPLAY94 said:
For those interested in using these here you go
These were pulled straight from the EVO 4G forum and thanks goes to webs05
Tested/Working:
##775# - EPST/PRL - PRL Settings
##786# - EPST - Status Menu
##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##33284# - Debug - Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)
##3424# - Diagnostic - Connect to phone in diag mode
##2539# - EPST/A-Key - Data A key menu
##7738# - EPST/P_Rev - Protocol Revision
##8626337# - EPST/Vocoder - Unsure
##4772579# - Reset the GPS
##72786# - changes DSA back to Factory
##889# - enables TTY ----- Was only able to get the following working on CM6 Rom -----
*#*#4636#*#* - Phone Information -"Phone information, Battery information, Battery history, Useage statistics, Wifi information"
Confirmed not Working:
##UPST# - modem directory
##778# - EPST - Advanced Programming
Unverified:
##37872# - Full Speed USB Mode - Enable/Disable
##3386# - DDTM - Enable/Disable
*#0*# - Test Utility - SAFE TO PLAY WITH
*#0011# Service menu
*#0228# Battery Status
*#0283# Receiver Packet loopback
*#0289# Melody Test again?
*#0673# Melody Test SAFE TO PLAY WITH
*#0782# RTCTimeRead displays time (and seconds)
*#0842# Vibration test SAFE TO PLAY WITH
*#147852# Allows you to access many screens including CDMA DATA Connections
*#1472365# GPS Setup
*#1575# Service menu
*#197328640# Service menu
*#2263# ??
*#232331# Bluetooth RF Test Mode
*#2454# Low Battery Power Off
*#2580# Service menu
*#2663# Touchscreen Accuracy Test SAFE TO PLAY WITH
*#2664# Touchscreen Firmware Version
*#2664# Main Firmware Update
*#2767*2878# Service menu
*#32489# Service menu
*#3264# RAM Version
*#3282*727336*# Current Data State
*#369852# Allows you to access many screens including CDMA DATA Connections
*#4238378# Service menu
*#6984125*# Service menu
*#7284# Service menu
*#745# Sec_RIL_Dump allows you to copy to phone memory, clear ril log, (greyed out copy to SDcard and view RIL log), exit
*#7450# Phone Dump Mode Disable
*#7451# Phone Dump Mode Enable
*#767*3855# Factory Format – CRAP!! WARNING!!!
*#7780# Factory Reset
*#9090# Service menu
*#9900# SysDump copy logcat/dumpstate/dumpsys, enable debug log, copy watchdogdumpstatelog)
Click to expand...
Click to collapse
Here, cleaned it up a bit for you.
Vdubtx said:
Here, cleaned it up a bit for you.
Click to expand...
Click to collapse
Fixed it thanks...didn't realize until after LOL
Does anybody remember which code we could use to flash prls
##2539# does not seem to be working on my evo 3d.
Any recent updates on this? Anyone been able to confirm/deny some of the ones in question? Thanks for the share! +Thanks!
Skyphos said:
Any recent updates on this? Anyone been able to confirm/deny some of the ones in question? Thanks for the share! +Thanks!
Click to expand...
Click to collapse
Not that I know of.....some aren't available unless you have the epst from the evo 4g. I know for sure ##775# won't work without the evo 4g epst
im trying to find the code that resets all the networking data info
i keep thinking its like ##RSTN# or ##RSTL# or something like that
not ##786# as that is just a phone reset and it dont touch the networking area
it could be something like ##7786# (note the extra 7) but its something like that
i googled and cant find it
I believe it is ##72786#
Sent from my Evo 3D CDMA using XDA Premium 4 mobile app
The Fer-Shiz-Nizzle said:
I believe it is ##72786#
Sent from my Evo 3D CDMA using XDA Premium 4 mobile app
Click to expand...
Click to collapse
bingo!
thanks
oldpueblo over in the General thread for the View noticed a Sprint rep used the calculator to enter the dialpad "secret codes" (as Android calls them) into the calculator. So here is a few of them I've found since digging through the APKs.
The calculator must be in LANDSCAPE to reveal the keys needed to input the codes.
!+!+4636+!+!
Testing
!+!+5382+!+!
Debug Tool
These might be CDMA radio specific, but please test on other Flyers.
!!786!
Reverse Logistics Support (menu to reset, MSL needed)
!!3282!
EPST
!!889!
Call Settings (SIP you can configure but there's no phone to dial out or answer)
!!33284!
Field Trial (View mode)
!!3424!
QXDM Service (activated upon start, use menu to disable it)
Credit: lovethyEVO, Korey_Nicholson
This was tested on a WiFi only model. 4636 worked got a imei number after changing the setting from cdma prefered,which I found odd. 5382 worked, didn't mess around with that. Rest I got errors on. Hope this helps
Sent from my HTC Flyer P512 using XDA Premium App
pardonmyfreedom said:
oldpueblo over in the General thread for the View noticed a Sprint rep used the calculator to enter the dialpad "secret codes" (as Android calls them) into the calculator. So here is a few of them I've found since digging through the APKs.
The calculator must be in LANDSCAPE to reveal the keys needed to input the codes.
!+!+4636+!+!
Testing
!+!+5382+!+!
Debug Tool
These might be CDMA radio specific, but please test on other Flyers.
!!889!
Call Settings (SIP you can configure but there's no phone to dial out or answer)
!!33284!
Field Trial (View mode)
!!3424!
QXDM Service (activated upon start, use menu to disable it)
I'm still trying to work out on how to get Field Trial to prompt you for the service password.
Click to expand...
Click to collapse
Didn't try QXDM but everything else here worked for me.
Here's one I tried that worked:
!!3282!
EPST
I found two more from trawling other devices, some of the codes are the same as the Flyer's phone enabled cousins, you just need to replace any character "*" (asterisk) with the "!" (exclamation), and any character "#" (pound/hash) becomes a "+" (plus) on the calculator.
The codes I found are:
!+!+8255+!+!
You can use this code to launch GTalk Service Monitor.
!+!+225+!+
Calendar Info and calendar debugging
Edit: Most of the codes on this link did not work for me, as don't all CDMA codes as I am on GSM. http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/298744/pulse-secret-codes/
I have the View and the EPST worked. I haven't had a chance to try the others yet.
I've contacted Verizon about the constant data-dropping issue I've been having with my Thunderbolt. The suggestion was to change the modem settings through:
Dial ##778
Edit Mode
000000
Modem Settings
Rev. A
Enable
OK
Menu
Commit Modifications
My question is, would these settings stay if I wipe and change ROM, especially from Sense to AOSP? I'm assuming ##778 woudn't even work under AOSP, but if I changed it under Sense, would the settings stick?
Yes, even if you wipe everything it was still active 3 roms later when I went to see why the handoff between 3g and 4g was taking so long it was still under enable.
If I helped you in any way please use the thank you button
So what does each option do? I mean enable vs ephrd? I have had data drop issues and I just changed the Rev.A settings to enable. But I would love to know why I am doing this.
That would disable 4G, I suppose?
How to program the model under a different service provider? I installed Official Rom 2.3.4 (Sense 2.1) # 2.11.605.5
After logging into the engineering menu and connect to the program QPST & DFS (as well as after dialing # # 778) line displays the ESN number 000000. Normally there should be a set of numbers \ letters.
I have no idea ... : (
In the dialer screen, dial ##3282# to get access to a special menu.
This is not device specific. That is the field test utility that can be used on every windows phone 7 device.
I never said it was device specific.
Didn't know this. Thanks
I hope this is the correct forum, if not I apologize. I have a Samsung Showcase from a small area provider. I have been playing around with it and had one question. It seems any directions I find to get into Service Mode (so you can program the phone) do not work. I followed the following:
To access the hidden menus from the dialer:
• Open the dialer and enter *#83786633 then press the Home key
• Open the dialer again (clear previously entry if it is still present) enter *#22745927
• Enter the SPC 000000 then enable Hidden Menu
After this you in theory can dial **772 to access the programming menu, however **772 does nothing when dialed. The phone is pretty much stock right now save for it is rooted. Anyone have any ideas how else you can access programming menus or what I might be doing wrong? I tried to disable the hidden menu -> reboot -> enable hidden menu -> reboot and that didn't seem to have any affect either. Thanks much for any help you can provide.
Well I guess I should have searched for Samsung Showcase for this, I believe I found the options I am looking for. If anyone else runs into this the following worked for me.
MIN Programming
Bring up the Dialer
Dial ##626#
Data Programming
Bring up the Dialer
Dial ##3282#
I did this on a pretty much stock phone (save for being rooted). I can't say whether this would work in a custom ROM or not. The information was pulled from the following post on cdmahosting.com so thanks to DYNET:
http://cdmahosting.com/showthread.php?p=118