I've download the ROM "dkamin german 6.1".
The I've reset my MDA, connected with ActiveSync and started the Himalaya Upgrade Tool.
The tool can not read out the actual Firmware Version an ist also can not upgrade the MDA.
What can i do?
Cisko
Related
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected properly between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Simply get your WM5 version in the WIKI section and run it. That is all you have to do!
I asume you had CINGULAR WM5 and upgraded to AT&T WM6? Here you can find all shipped versions WM5: http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades and here all WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
Just pick yours!
enahsak said:
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Click to expand...
Click to collapse
Also, http://mrvanx.org has downgrade guides. Great one.
Its been awhile since I've used spb backup, but I thought that there as an option to selectively restore files. Have you tried this?
Latest AT&T WM5 rom is avilable direct from HTC... just download it and flash away... Puts you right back to latest shipped settings.
http://www.america.htc.com/support/8525/software-downloads.html
What are you trying to recover though?
HELP still on HOW TO DOWNGRADE
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
What operating system are you using?
enahsak said:
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Click to expand...
Click to collapse
I had this once too!
If you grab the official AT&T WM5 ROM from the WIKI this error will not appear!
Another workaround: extract the nbh file from your downloaded WM5 and flash it with CUSTOMRUU
Hello Guys,
I have updatet my PPC from Windows 2003 to Windows mobile 6.
Now i have downgradet to windows mobile 5 and my telephone (calls) dont work.
I i try to upgrade to another version (wm6) i get an error "Country-ID Error" on my PC and my Pocket PC goes off. If i take my PPC out of the Cradle, my pps returns in the Bootloader modus and "Seriell" have a red Background..
Please help me
which ROM have you used ?
before,, mine is xda-II, and very happy with wm6 from :
C_ShekharAKU7.0c.R40.P24_public
try to reflash with another wm6 ROM, i did 4 times reflasher with wm6 ROM different. and stable with C_ShekharAKU7.0c.R40.P24_public
maybe you must use or click at HimaUpgradeUt_noID.exe
not at HimaUpgradeUt.exe
Hi, I had up-graded my ppc with Transformer 1.1 and use it for more than a month, until I up-grade the RadioRom_v2.69.21.
My ppc become very slow and checked the hardware setting, it didn’t show any radio version. I had also done hard reset but problem wasn’t solve and try to re-load again but the Microsoft ActiveSync 4.5 can not detect my ppc.
Can any one help?
Thank-you.
My Prophet detail :
IPL 1.00
SPL 1.00.0000
OS 6.6.6.6666
ROM Version 6.6.6.666WWE
ROM Date 8/23/07
ExtROM Version Transformer 1.1
glim59 said:
Hi, I had up-graded my ppc with Transformer 1.1 and use it for more than a month, until I up-grade the RadioRom_v2.69.21.
My ppc become very slow and checked the hardware setting, it didn’t show any radio version. I had also done hard reset but problem wasn’t solve and try to re-load again but the Microsoft ActiveSync 4.5 can not detect my ppc.
Can any one help?
Thank-you.
My Prophet detail :
IPL 1.00
SPL 1.00.0000
OS 6.6.6.6666
ROM Version 6.6.6.666WWE
ROM Date 8/23/07
ExtROM Version Transformer 1.1
Click to expand...
Click to collapse
Never flash radio with your SPL.1.xx.xxx, prophet may be dead ~~~ or half dead.......
1. go to my signature to look for the NVID prophet rom,
2. force bootloader manually then flash it, then,
3. SPL will be = 2.xx.xxxx,
4. Flash your preferred raidio,
5. Then flash your loved wm6.1 rom. (better with my lazy tool... )
enjoy~~
Hi dioxda2,
Thank-you very much for your advice. I had flash my ppc with NVID prophet rom and Radio rom v2.19
Next looking for WM6.1 rom to flash
Regards
My phone model is 838Pro and upgrade to WM6.0 by official ROM, now IPL 1.04 and SPL 2.03.
1/only SSPL method to install other version ROM or radio. is it right?
2/copy sspl to ppc and run, connect usb cable with PC and the then run RUU program to install OS or radio. process OK?
3/above process need XP PC to complete?
Thanks you very much!!