hi, i m still unable to upgrade to wm6.1. been trying very hard for the last couple of days...current im using dopod 838 pro. wm5.
just download a rom with wm6 on it and flash it on ur hermes it will give u wm6.1 and the rom there are some on this site :
http://www.4shared.com/dir/8510623/eded936d/sharing.html
What actual problems are you running into?
Install Hard SPL V7. Then use sd card method to install new rom. EASY...
Cheers...
Related
hi... i have a problem related with downgrading my jamin... currently i am using the Jester AUK 2.2 rom... i installed it because i upgraded to WM6. but now i want to go back to the orignal imate rom that came with the set...the problem is that the jester rom upgraded my IPL and SPL version and the imate rom's are older so it won't install the rom... can any one help me out!!!!!!!
same problem here i have qtek nvid rom on wm5 to wm6 upgrade page now and it ain't going back to jamin rom even when i eatract nb file and used the ruu rom updater which dont checks upon rom and everything goes fine till 95% and suddenly stops and then i have to put back qtek nvid rom again
but i have no problems
i've the same problem
I do not think we can downgrade to any imate rom with software method.
I wanna downgrade too, so that I can send back for repair, my antenna is losen.... I m just using a piece of paper to fix it...
hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .
I want that moderators make this thread sticky so that all G4 Imate Jamin Users can read this before doing everything in order to upgrade to WM6.
Dear user!
All the available WM6 ROMs require installing a Qtek WM5 before upgrading to WM6. And if you installed the ROM that they required, your Imate will become a Qtek for ever and there is no turning back!
It means that you cannot install Imate Original ROMs on your device anymore & you cannot even install Qtek original ROMs on your device because there is no method to CID-Unlock a G4 Imate jamin!
My personal advice is if you want to upgrade to WM6, DO NOT install any of those WM5 ROMs on your device and just install the WM6 upgrade.
Ehm.. You do know that there allready IS a sticky on how to do the upgrading ?
only SPL changes you can bring back imate boot screens (splash) by using nvid ruu ,SPL is hard to change but radio and splash could be changed right!! .although first time users go into shock for days ,but don't worry i had the same one too ,it doesn't matter now.
koorosh_bsboys said:
I want that moderators make this thread sticky so that all G4 Imate Jamin Users can read this before doing everything in order to upgrade to WM6.
Dear user!
All the available WM6 ROMs require installing a Qtek WM5 before upgrading to WM6. And if you installed the ROM that they required, your Imate will become a Qtek for ever and there is no turning back!
It means that you cannot install Imate Original ROMs on your device anymore & you cannot even install Qtek original ROMs on your device because there is no method to CID-Unlock a G4 Imate jamin!
My personal advice is if you want to upgrade to WM6, DO NOT install any of those WM5 ROMs on your device and just install the WM6 upgrade.
Click to expand...
Click to collapse
TOO LATE !!!!!
The only thing that gets me is that with the Imate you could paste into the WiFi password box, withe the Qtek you can't and when you have a 63 character password that's a pain in the arse!
Phil
but password is not managed by SPL or radio ,so suggest a different OS for imate instead of nvidQtek or get some cab to remember your password does anyone know such OS or cab
Hi, i'm using pdaviet sonblack wm6.1 and i wants to downgrade back to the original o2 atom wm5 rom. Because the wm6.1 rom keep hanging and it is not very gd...any pls help??
you can download the proper wm5 rom and run it, first of all it may not work, but run it again and it should then downgrade to wm5
if you search or look in wiki theres lots of places to get information to help if you get any problems
2234jones said:
you can download the proper wm5 rom and run it, first of all it may not work, but run it again and it should then downgrade to wm5
if you search or look in wiki theres lots of places to get information to help if you get any problems
Click to expand...
Click to collapse
thanks alot...i will try...
hey look up my thread "camera and fm dead" after upgrade to kumara wm 6.WM 5 is the correct OS for atom.
go back and enjoy!
Hello,
I have AT&T 8525 with Windows Mobile 5.0
Should I upgrade to WM 6 before installing HARD SPL?
Or upgrade after installing HARD SPL
What does hard spl do?
If you are going to upgrade to AT&T 8525 WM 6 official ROM then no need to do a HARDSPL but if you are going to used WM 6 Cooked ROM then it is a MUST to do a HARDSPL.
AFAIK
HardSPL will allow you to flash your unit with a unofficial release ROM or Cooked ROM, or even the other brand official ROM as long as it is for Hermes.
here's a link from the wiki
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
hope it helps....
Happy Holiday......
Alright, got official wm 6.0,
Installing HardSPL, no luck keep getting Error 260, it loses connection with the device for no reason, I'm wondering why there isn't a straight forward Hard-SPL readme, that says how to install it, the instructions are all over the place...
Please go to the HardSPL thread with your questions.