--------------------------------------------------------------------------------
hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
krazy_about_technology said:
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
Click to expand...
Click to collapse
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
hksin1988 said:
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
Click to expand...
Click to collapse
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
npiyanut said:
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
Click to expand...
Click to collapse
hey i tried upgrading to original wm6 but it always shows error at 2%, "Invalid Vendor ID" n my phone gets restart.
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
krazy_about_technology said:
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Click to expand...
Click to collapse
I tried upgrading to stock WM5 Rom given here
http://forum.xda-developers.com/showthread.php?t=382063
but while ungrading it is showing Invalid Vendor ID, and my phone is getting restart ...
so ,,,,,, is ther anyway to hspl my phone or something ???
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
hksin1988 said:
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
Click to expand...
Click to collapse
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
rakesh_4utoo said:
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
Click to expand...
Click to collapse
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
How to remove Smart Mobility Boot Screen
Hey Guys please also tell me that how can i remove this Smart Mobility Boot Screen and revert back to Old HTC logo White screen...
any solution ???
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
ramersonw said:
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
Click to expand...
Click to collapse
i hv already given this a try.....but ended up getting error all the time.....
i tried Mtty i dont know how many times but in last the error comes
and one more thing.....tht unbrick solution is for P3400i and newer GENEs (HT 8XX), even my phone's serial no starts frm HT8XXX, although it is old version.....ONPL is 1.07.0.0 ...
while in newer genes it is 1.10.0.0 n more
so this solution wont apply on mine...
BUT Still i gave it a try.......not workin for me...
hksin1988 said:
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
Click to expand...
Click to collapse
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
rakesh_4utoo said:
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
Click to expand...
Click to collapse
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
hksin1988 said:
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
Click to expand...
Click to collapse
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
rakesh_4utoo said:
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
Click to expand...
Click to collapse
yea dear...think something................i m very thankful to u....tht u r takin interest in my problem.....
Finally Gene is alive......thanks to HTC service centre..
Finally i gave my phone to HTC service centre...and...ther made my gene alive once again...
Now m very happy now...!!!
i would like to thank every XDA forum member for helping me out and givin me response.
i mistakenly flashed wm6.1 stock rom which was for HTC P3400i and newer P3400, so my phone got stuck at bootloader.
i tried almost each n every solution avaible here at XDA forum , but nothing helped me out.
as each time it was showing me error in flashing back to original ROM.
finally i gave up and decided to give my phone to HTC service centre since it was under warrenty...
so...now my phone is OK....it has original wm5 once again.,,,
and i will flash to Fusion 9.0 rom tonight.....
Related
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
loginvicky said:
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
Click to expand...
Click to collapse
do you have spl 1.2 or 3.5 and can you get to Bootloader screen ( that tri color screen)
spl 1.2 and to get to the tri colour screen wat sud i do ???????????
plz help irius wat next ????????????
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
to get to bootloader press camera + reset and make sure you don't have mini sd card in
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
Hi
Don't Panic. Press cameraButton+ Reset by stylus for few seconds then you get the tri colour screen.
Then you you update again with Radio 1.5.7.000. You will be ok if you have spl 1.20
Good Luck
God bless you both, thank god the tri colour screen did appear but when i tried the radio rom 1.57 flashing again, it goes till 7 percent then again shows error of rom image file corrupt please check kinda stuff, this is the same error which i got umpteen times after which the athena got stuff in the htc logo mode ........... still its there and yes that tri colour screen does come up.... plz help what to do next........ i dont want want to upgrade my radio now ...its ok even if i am able to boot in to my old good 6.0 os...., also the bootloader is 1.0 version not 1.2 .........plz guys help i really would pray to god to bless ur souls........ u are doing a fine job thanks.....
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
just lemme know if any ruu i could use in the bootloader mode that should bring to life my now almost bricked dopod............plz smbdy helpppp
loginvicky said:
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
Click to expand...
Click to collapse
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
sabes143 said:
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
Click to expand...
Click to collapse
After the above you'll be in spl1.2. You can only flash spl 1.2 based Rom. Do not use any SPL3.5 ROM
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
loginvicky said:
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
Click to expand...
Click to collapse
Are you sure you want to get there? It is a one way street. You can't come back once you get there. This means you would have less choice in ROM. You can't run your original ROM anymore. If you need to send it in for warranty, you may have problem as you would have clearly shown that you have voided the warranty condition (depending on how alert the service guy is, you may or may not be caught, but just because many manage to get away does not mean that everyone would get away) You must have got the wrong impression that it is better. It is not the case. Many who are there are waiting to come back, but can't for now.
Everything you get in spl3.5 ROM you can get in spl1.2 ROM, except with spl1.2 ROM you have more memory for yourself.
Think carefully, and think again, and again, before you get there.
Hi Guys
Download from the Link Below.
http://rapidshare.com/files/150494470/RUU_Signed.nbh.html
Please Give your Feedbacks
only blank screen after...this u/g
only blank & white screen....ther?
Where you able to Update without any error
also which HSPL did you use
wat are your IPL & SPL versions
y73.h47 said:
Hi Guys
Download from the Link Below.
http://rapidshare.com/files/150494470/RUU_Signed.nbh.html
Please Give your Feedbacks
Click to expand...
Click to collapse
My GENE is dead now after upgraduing this ROM.
Stuck in bootloader. Suggest me something
if your device is CID unlocked, try another ROM.
sry 4 my english.
did u try it b/fore posting?
hi...dude ..did u try it ever ...is dis for gene100...u sure...ther?
Hi,
Try with this HSPL
http://forum.xda-developers.com/showpost.php?p=2658032&postcount=85
I have tested with the new HT8XX devices its working fine
But not sure about older dopod D600 and similar devices
not suitable for htc p3400
hi...ther....ur gene_hspl _ht8xx... isn't suitable hspl for gene100..so dude..
don't recommend it for gene100 or p3400 or old ones....!!!! tnx anyway
hey has anyone been able to solve this prob if they have got it repaired after the gene went dead..........can just sugeest what to do coz even mine went dead
JUSS TRY gene_hspl & u/gradde ur gene with new rom e.g. fusion 9 etc....again
think it'll solve ur prob...
my gene isn't even starting it goes till the white screen the htc logo comes n then it switches off so i can't access anythin is thr any other way or will i need to give it at the service centre
hi jb
juss hold 'camera' button & reset with stylus by pressing 'reset'.....then try to u/grade....
thanx bro owe u alot u got my phone back runnin thanx a tonne man............
my gene 100 dead
My GENE is dead now after upgraduing this ROM.
Stuck in bootloader. Suggest me something
hi ther.
1st d/load this rom(RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship ) or any fusion series rom by lomlom...and then upgrade ..when u reach final step of u/grade fr ur pc then
juss hold 'camera' button & reset ur phone with ur stylus ...n it's done....ur phone is now 3400i...
after that ,,
if u still wanna u/grade again then 1st install gene_hspl @ root dir of ur phone..
http://uploaded.to/?id=weipqd
see more here to d/load..
http://forum.xda-developers.com/showthread.php?t=396744
Good evening friends, I need help with upgrade from rom gene in p3401 old, to perform the release of CID and SPL 1.10.Olip onbl 1.11.0000 GSM 02.98.90 OS 1.11.0.0 and when time passes by a rom ROMUpdateUtility, displays the error of 270 file corrupted image. Tried more than one rom and submit the same message!
Sorry about my English .. THANK YOU..
Read the sticky post at the top of this forum's list, the guide to flashing/unlocking p3400 and p3400i. That will get you on your feet buddy
krazy_about_technology said:
Read the sticky post at the top of this forum's list, the guide to flashing/unlocking p3400 and p3400i. That will get you on your feet buddy
Click to expand...
Click to collapse
Krazy Hello, I followed the tutorial correctly, I read it several times before starting the process, both to make the release of the SPL correctly, my spl is 1.10.Olip with the problem is when passing the rom .. to 3% and is in the reboot of the machine.
pgonzo said:
Krazy Hello, I followed the tutorial correctly, I read it several times before starting the process, both to make the release of the SPL correctly, my spl is 1.10.Olip with the problem is when passing the rom .. to 3% and is in the reboot of the machine.
Click to expand...
Click to collapse
can u post what comes on the boot screen while booting, like
IPL
SPL
It is happening rom (Pro User's WM 6.1 ROM Edition) .. thanks to all!
pgonzo said:
It is happening rom (Pro User's WM 6.5 ROM) .. thanks to all!
Click to expand...
Click to collapse
How came a new question, I change the initial screen, one that comes with the information SPL, GSM, ONBL, because my OS is the operator's screen, how do I change it for the original HTC .. I'm using the rom wm6.5 thank you
i have gene old spl as olipro but my mistake i did upgrade to orefkov spl , now my bootloader shows spl as orefkov and not going to windows ... so any way to make my spl as olipro ... please help??
Service Center or JTAG, no other option.
krazy_about_technology said:
Service Center or JTAG, no other option.
Click to expand...
Click to collapse
Hi Krazy,
How if I take the original old gene's SPL from oficial WM 6 asia, and flash the SpL eith it, nothing to loos to try it.
BesFen said:
Hi Krazy,
How if I take the original old gene's SPL from oficial WM 6 asia, and flash the SpL eith it, nothing to loos to try it.
Click to expand...
Click to collapse
it will not solve the problem
read this and then this also
for some reason RUU fails to update the SPL image, the phone comes to screen with progress bar but then RUU fails and says "plaese use a new update utility"
I DONT KNOW Y U PEOPLE ARE SO CARELESS IN DOING SUCH THINGS.....
THERE ARE SO MANY WARNINGS WRITTEN IN STICKY POSTS AND THERE ARE NOW SEVERAL METHODS TO IDENTIFY OLD-NEW GENE AND THEN UPDATE IT...
vaibhav_batra_the_techguy said:
I DONT KNOW Y U PEOPLE ARE SO CARELESS IN DOING SUCH THINGS.....
THERE ARE SO MANY WARNINGS WRITTEN IN STICKY POSTS AND THERE ARE NOW SEVERAL METHODS TO IDENTIFY OLD-NEW GENE AND THEN UPDATE IT...
Click to expand...
Click to collapse
Don't get mad. Actually its hilarious. In atleast once in 15 days, you will find one guy or the other bricking his or device by wrongly patching.
Come to think of it, I have seen around three or more pple in the last month alone 'updating' the SPL of their old gene to oref (even though there Gene was not complaining with .olip)
I wonder what they would have done when we joined this forum
ur right buddy @addicted
hi
buddy ur right bulls eye i thinks its more like people think they are too smart and do all crazy things i know for a fact that this has been told a mill+++ times not to try the same anyway try and help the poor soul
some one got into this problem and got out i dont remember who i hope he sees this thread and tries to help
Addicted2xda said:
Don't get mad. Actually its hilarious. In atleast once in 15 days, you will find one guy or the other bricking his or device by wrongly patching.
Come to think of it, I have seen around three or more pple in the last month alone 'updating' the SPL of their old gene to oref (even though there Gene was not complaining with .olip)
I wonder what they would have done when we joined this forum
Click to expand...
Click to collapse
I have sucessfully upgraded the old gene
GUYS........... I HAVE RECOVERED MY OLD GENE THAT GOT BRICKED WITH orefkov spl ... IT IS DONE AS ... I PUT MY MOBILE IN BOOT LOADER AND THEN DO THE HSPL OF OLIPRO... IT HAS OLIPRO NBH FINE SO IT GOT UPDATED TO 1.20 OLIPRO SPL THEN AGAIN I RESTART THE MOBILE IN BOOT LOADER AND IT SHOWS THE OLIPRO SPL ... AFTER THAT I UPDATED THE ROM USING RUU AND MOBILE GOT WORKED AND NOW I AM HAVING WM 6.1...
AND AFTER THAT AGAIN I TRYED TO FLASH THE OREFKOV BUT IT FLASHING AND SHOWS ONLY OLIPRO SPL .... IT IS NOT CHANGING THE OREFKOV... SO I JUST LEAVE IT
MY MOBILE WORKING NOW AS SPL 1.20 OLI ... IS IT CORRECT SPL ??? DO I HAVE TO UPDATE OLD GENE ROMS ???
@rahmanee
hi
if my understanding is right ur spl now is .olip so ur gene is old gene
now if u have flashed a ROM for old gene and its working good flash only rom for old gene and don't try any more tricks
stick to old gene flash old gene ROM and have fun
im saying this based on what i understand from ur posting
i hope ur problem is solved good luck
rahmaneee said:
GUYS........... I HAVE RECOVERED MY OLD GENE THAT GOT BRICKED WITH orefkov spl ... IT IS DONE AS ... I PUT MY MOBILE IN BOOT LOADER AND THEN DO THE HSPL OF OLIPRO... IT HAS OLIPRO NBH FINE SO IT GOT UPDATED TO 1.20 OLIPRO SPL THEN AGAIN I RESTART THE MOBILE IN BOOT LOADER AND IT SHOWS THE OLIPRO SPL ... AFTER THAT I UPDATED THE ROM USING RUU AND MOBILE GOT WORKED AND NOW I AM HAVING WM 6.1...
AND AFTER THAT AGAIN I TRYED TO FLASH THE OREFKOV BUT IT FLASHING AND SHOWS ONLY OLIPRO SPL .... IT IS NOT CHANGING THE OREFKOV... SO I JUST LEAVE IT
MY MOBILE WORKING NOW AS SPL 1.20 OLI ... IS IT CORRECT SPL ??? DO I HAVE TO UPDATE OLD GENE ROMS ???
Click to expand...
Click to collapse
tanxxxxx it is working haree
yes it is working sir... it was old gene... can u suggest me good wm6.5 rom which is stable and good. just give me a link for wm 6.5 . becasue there are lots roms lol...tanx haree
over clock cpu by homeplus
up to how much mhz i can over clock my cpu in old gene ???using home plus battery status??
im a sumit Fan(Krazy)@ rahamaneee
hi
no offense to the other cooks here but i have always been a Fan of Sumit u can see my sign (Krazy) i can see that he has released a new build try it u will like as his roms are generally loaded with most of the basic things u would need in ur ROM MAKE SURE U USE THE ROM FOR OLD GENE ONLY OK
AND I WAS TOLD THAT OVER CLOKING IS BAD FOR UR PHONE LIFE I WOULD SUGGEST U NOT TO DO I NEVER DID IT WHILE USING MY GENE
rahmaneee said:
yes it is working sir... it was old gene... can u suggest me good wm6.5 rom which is stable and good. just give me a link for wm 6.5 . becasue there are lots roms lol...tanx haree
Click to expand...
Click to collapse
rahmaneee said:
up to how much mhz i can over clock my cpu in old gene ???using home plus battery status??
Click to expand...
Click to collapse
If you are a speed fanatic like me, you can go for upto 20% of your Core CPU Speed. But do not go beyond that, as it will fry your CPU and drain the battery too. Better use CPU Scalar and set the max speed to 240 MHz and Min speed to 110 MHz (or near about). this gives good speed and performance (balanced).
Hope it helps
Sumitspro wm 6.5 not working
i having my old gene and i updated to 6.5 but it stuck in welcome screen and shows 6.5... Can any one tell me what was the problem ??
did u download the right ROM
hi
did u download the right ROM for ur Phone u need to downlaod the ROM for old gene may be this is the mistake u did
REMEMBER urs is a old gene before downloading chek if it is for ur Phone and then download i have never ever had any problems with Sumits ROM
goodluck
rahmaneee said:
i having my old gene and i updated to 6.5 but it stuck in welcome screen and shows 6.5... Can any one tell me what was the problem ??
Click to expand...
Click to collapse
haree said:
hi
did u download the right ROM for ur Phone u need to downlaod the ROM for old gene may be this is the mistake u did
REMEMBER urs is a old gene before downloading chek if it is for ur Phone and then download i have never ever had any problems with Sumits ROM
goodluck
Click to expand...
Click to collapse
@haree:
Buddy, his new 6.5 has a problem with old Genes (for once ).
@everyone: Is it too much to read the thread before downloading and flashing? He has said it a number of times that this rom has a problem.
@addicted & rahamanee
hi
buddy got it thanks
@ rahamanee
just flash any other ROM(for old gene) and ur phone should be ok
good luck
Addicted2xda said:
@haree:
Buddy, his new 6.5 has a problem with old Genes (for once ).
@everyone: Is it too much to read the thread before downloading and flashing? He has said it a number of times that this rom has a problem.
Click to expand...
Click to collapse
hi
guys i just stumbled upon this link hope it helps it has a few shipped roms for the gene Enjoy
Link : http://shipped-roms.com/shipped/Gene/
Note : all are original shipped rom so chek and flash the right rom for ur gene
IMPORTANT READ THIS BEFORE FLASHING : http://forum.xda-developers.com/showthread.php?t=506467
haree said:
hi
guys i just stumbled upon this link hope it helps it has a few shipped roms for the gene Enjoy
Link : http://shipped-roms.com/shipped/Gene/
Click to expand...
Click to collapse
Does these contains any SPL ?
Are they SAfe to Flash directly like our Ruu method?
pavanbaw said:
Does these contains any SPL ?
Are they SAfe to Flash directly like our Ruu method?
Click to expand...
Click to collapse
I think they are Official and hence one should read this before glashing with any of these.
pavanbaw said:
Does these contains any SPL ?
Are they SAfe to Flash directly like our Ruu method?
Click to expand...
Click to collapse
lamborg said:
I think they are Official and hence one should read this before glashing with any of these.
Click to expand...
Click to collapse
all are original shipped rom so chek and flash the right rom for ur gene
the above roms are the oldest one i've ever seen...it says windows mobile 5.0.....lol
and also it change my spl to 1.07.0000 ...tried to update the spl by mtty.exe but shows error on step with "ls.bin".....so i'm stuck with this old rom with portugese language...
any help would be appreciated
and also it change my spl to 1.07.0000 ...tried to update the spl by mtty.exe but shows error on step with "ls.bin".....so i'm stuck with this old rom with portugese language...
any help would be appreciated
HTC3400i_np said:
and also it change my spl to 1.07.0000 ...tried to update the spl by mtty.exe but shows error on step with "ls.bin".....so i'm stuck with this old rom with portugese language...
any help would be appreciated
Click to expand...
Click to collapse
do not downgrade to wm5.
apart from wanting to check the original OEM apps out (via dump) to add into custom roms for smoother operation i don't see why people want to flash these roms onto their devices...
why not opt for newer, stable build releases rather than downgrade your device to wm5...(its like buying a brand new laptop with the best available config just to run win95 on it)
and if you've read the stickies in the forum, you'd know that it isn't exactly safe or recommended...so why tempt fate...
i am right, ain't i??
Hi,
RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe is for old Gene I guess.
Can anybody confirm it ?
Regards,
Duron23
psychocyst said:
apart from wanting to check the original OEM apps out (via dump) to add into custom roms for smoother operation i don't see why people want to flash these roms onto their devices...
why not opt for newer, stable build releases rather than downgrade your device to wm5...(its like buying a brand new laptop with the best available config just to run win95 on it)
and if you've read the stickies in the forum, you'd know that it isn't exactly safe or recommended...so why tempt fate...
i am right, ain't i??
Click to expand...
Click to collapse
hi
i saw a few postings asking for original roms for their gene and got a few Pms too so i was just trying to help OK checking if this is the right one for their phone is the individuals job right
@haree
Bhai cud u give us any new roms from phamguang ..that pda viet somewhat like that..u used to post.
premolikeshtc said:
Bhai cud u give us any new roms from phamguang ..that pda viet somewhat like that..u used to post.
Click to expand...
Click to collapse
hi
sorry to say Pham has totally stopped development on gene looks like hes given up on ur gene sorry no action at all frum hm on the gene in fact he even stopped action on the Jade
but we got great developers here look around ull get some real good roms here
Plzz Help
I tried this shipped ROM, it change my spl to 1.07.0000 ...tried to replace the ROM, but it fails, it messages " The Image file is corrupted please check your update utility" what I do now, plzz help me to update my ROM, i'm stuck with this old rom with portugese language........any help would be appreciated
Thanks Haree. I thought they can be something special . I make my own rom since besfen shared his kitchen.
horry said:
I tried this shipped ROM, it change my spl to 1.07.0000 ...tried to replace the ROM, but it fails, it messages " The Image file is corrupted please check your update utility" what I do now, plzz help me to update my ROM, i'm stuck with this old rom with portugese language........any help would be appreciated
Click to expand...
Click to collapse
Hi
READ READ
i have this on the first page :
Note : all are original shipped rom so chek and flash the right rom for ur gene and its in BOLD letters
its ur job to find out the right rom for u