Hey guys,
I wanted to make some improvement with my Prophet, but firstly i flashed it with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship but then I spotted WiFi is not working properly, so I started to get newer ROMS but what was difficult to understand is that after i flash him i didn't have bootloader mode at any other ROM which I wanted to put in... now the phone is stuck on bootloader with logo of Qtek and:
IPL:2.15.0001
SPL:2.20.0001
GSM:02.47.21
OS 4.0.0.0
Hey,
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
Related
hello I´ve recover my m3100 from a dead brick (after used of universal sim lock) to full working phone
Her is my way
1. I´ve first try flashing a windows mobil 5 rom from my qtek 2020 on the m3100 for 2-3 times
2. then I´ve flas it with the new rom from Cingular ther are using bootloader 1,06..... and IT COME BACK ALIVE....
and if you have a HTC HERMES Then you just find a rom with you phons cid her
"http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades"
BUT REMEMBER IF YOU HAVE A ORANGE M3100 YOU CAN´T FLASH OTHER ROMS
BECAUST YOU HAVE TO USED A ORANGE CID ROM AND IS´T NOT OUT YET..
Good to hear That your device Is up now Congrat's , Wht if it's possible with human being
Why u've instal qtek 2020 on this hermes ?
I´ve just wanted to try somthing after 30 days looking at a £450 brick
@kimbay:
I have some questions for you, in order to understand how you fixed it and provide a "solution" for the others:
1) About the Qtek2020 flashing:
- Did the Himalaya flashing process did anything on the hermes?
- Where did the Himalaya flashing process stopped?
- What did you see on the Hermes screen?
- What error did you see on the Himalaya upgrade utility?
- Which rom did you exactly use? (post the ftp link of it please)
2) About your M3100
- Which CID does your hermes have? If it's a M3100 from UK, i guess it is ORANG001, right?
- Which ROM, radio rom and bootloader version did you have on your device when you fixed the problem?
If there's anything else I am missing and you think can be useful, please post it too...
Yes, please fill us in because I'm sitting on a brick'd TyTN
congrads on bringing it back to life
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
Hi POF
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Then I just try the new cirguler rom.
yes my m3100 is a orange001 cid -bootloader 1,04
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
P.S. now my problem is that I can´t unlock the phone because imei-unlock do not suport bootload 1,06
regards
kim
Izzard-UK said:
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
not for the moment I´am also stuck on cingular rom
Click to expand...
Click to collapse
kimbay said:
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Click to expand...
Click to collapse
OK, but which rom did you exactly use? (post the ftp link of it please)
ftp://xda:[email protected]/Himalaya/
kimbay said:
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
Click to expand...
Click to collapse
It's ok, it was original rom from M3100... no problem, no need to upload anything.
If you have dead Hermes try to flash with Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship.exe For me - it`s work.Regards
SPV M3100 Freez
Hello
I have A SPV M3100 anyoane write same ... for unlock and new freez in "Windows mobile"
when i put in 3 color and i see:
"Herm100
IPL-1.01
Herm100
SPL-1.04"
And when is in 3 color and connect to PC ActivSync get error cannot recognize this device
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Hi,, I have used shelltool to install TNT 6.1 from wizlove all went smooth
Then i decided to try a different radio so flashed 02.71.11 from o2.37.11
all went smooth no problem,, It wasnt a day and I had to get rid of 02.71.11
so tried flashing to others and ruu loses conection on staus bar and screen goes into the green red mode,, since then I have tried to do hard spl and it gets as far as the white screen and then ruu says lost connection
I cant seam to do anything now cant flash wiz love ether
help me please head is sore from reading too much
Thanks
what have I done now
OK so I tried going back to wizlove with the shelltool and its now stuck on the imate splash screen,,,maybe I should leave this thing alone
How can I fix it?
try to make Hard rest then install original rom wm5
that will work...
Hey,
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
AND just dont use explosives like TNT on your device ....
I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!!
Hey,
First try an hard reset, this can be done with pushing the _commmenager-button+Camera-button+stylus-reset(on bottom of ur device)_ at the same time, just release the stylus-reset some earlyer then the other 2 buttons.
if thats not working:
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
whoops doublepost...
hi all,
i have recieved a hermes with boot loader screen (tri color) when i try to switch it on it goes directly to 2 color screen doesnt go further at all. I've read the sticky thread . As the phone which i have shows on screen the following
HERM100
IPL-1.04
HERM100
SPL-1.40. Olipro
thats it nothing else exept tri color screen so read the sticky threadabout how to unbrick hermes and did following options when i flashed tmobile uk rom it goes further but it stucks at 11% and doesnt go further and when i try to flash a rom which has 1.04 (528420-ruu_hermes_1[1].18.255.3_1.18.255.108_1.03.03.10_qtek_wwe_ship) but it doesnt do anything with phone, it cant even detect the phone and give error straight away can anyone please guide me what should i do further to alive this phone
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
hi no reply but 53 views any mod plz help
WHaT YOU MEAN?
by:
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
---I think your hermes is bricked if you cant upgrade even a stock rom is bricked dude...
For the last thing you could do about it... flash a stock rom like ATT stripped you can find it on the WM6 subforum here on hermes forums... all the chefs put in the main post the link to it... if it doesnt works so... you are screwed up...
be sure ahave this:
Battery at 100% at least 60%
XP pc not vista not wm7 ok?
A nice usb cable and nice USB ports too on the XP pc
Dont run anything till it finish and... dont flash with SIM card and microSD inserted.
Go ahead and post your results again.
hi thanks for your reply i have tried these 2 following roms
HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108 (stucks at 12%)
RUU_Hermes_CINGULAR_WWE_3[1].62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship (stucks at 11%)
with these its not really working anyother thing which u think i should do
br
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
mmmm
Sounds like your batt is almost dead... maybe it shows... 70% but drains to fast is lying to you... or your cable is broken somewhere...
you can DL the stock stripped here
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
ultramag69 said:
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
Click to expand...
Click to collapse
yes u r right mate my phones radio rom was corrupted and thanks to + Que PPC for providing help and link of the official AT&T WM6 striped rom which turned my phone back to normal but the problem is when i went to device information it says like this
ROM version: 3.62.502.3
ROM date: 10/11/07
Radio version:
Protocol Version:
so radio and protocol versions are blank nothing is there so can u please tell me wt should i do to solve this or its not solvable at all thank you very much indeed to you guys. I really appreciate it
br Sherry
Not solvable... You might like to try running your SHIPPED STOCK Radio Rom, if you know what it is, but there isn't much hope of recovery once the radio goes... Look at it this way, couldn't hurt....