MiniSD 2GB and ROM upgrade - 8125, K-JAM, P4300, MDA Vario Accessories

Dear all,
I have come across a problem and unable to resolve it. I did upgrade my wizard from WM5 (official ROM) to GM ROM. ROM is working perfectly fine but there was a precaution i read on forum not to place MiniSD card while upgrade and unfortunately i forgot doing that. After flashing my new ROM now whenever i access my card it had some data of about 490MB in it prior upgrading ROM which i am unable to delete, i have tried formatting it with my Wizard (with Pocket Mechanic, Resco File Explorer even with builtin format flash function of ROM) it formats successfully but data that was previously saved on it remains there and i am unable to copy anything on it whenever i copy/delete anything it comes back to its previous state.
Can anybody please guide me how to get rid of this situation, with Pocket Mechanic Scandisk software I was unable to fix the clusters because it end up with an error "FAT tables doesn't match"
Looking forward for your expert opinions.

have you tried formatting it in windows using a memory card reader?

Hi Sythen,
thanks for your response, yes i did but it is unable to format it. Sometime if it does the data remains in the MiniSd card and by DOS it says track - 0 bad disk not usable.

Related

sd card gone haywire (help needed)

ive got a sandisk 256mb card which one day decided to corrupt all my data on it and now i got boxes and symbols for the folders and i cant seem to delete these files from the sd disk from the xda or from windows, it is complaining about the data being write protected or that im unable to perform the request!
any idea on how i format this bugger?
i dont need the data on it i just need to
format it or get rid of the files on it!
any :shock: :shock: help appreciated
thanx!
Silly question maybe, but it isn't the little switch on the card, is it?
yes m8 thats the 1st thing i checked!
can a sdreader format the card ?
Weird, I just noticed I have this same problem today.
Although I have an SD card reader on my PC, so as soon as I find the drivers, I should be able to format it. Don't know any other way though
my card did the same thing
i'm not sure if it happent because i took it out while some of the programs on it were running in the background
or if the sdreader killed it
i could not format it using the sdreader or anything
solved it with this tool
it format'd the card in 10sec and it's been ok ever since
http://www.softwinter.com/storagetools.html

SD card gets erased

Gang,
I've recently acquired at AT&T Branded SX56, been moderately happy, but can not complain about the price ($100 . However, twice now I've had the SD card get completely wiped. This is the SD card that came with the phone - it used to have some nice games and the MS software pack. It went bye-bye about two weeks ago. I thought it was a glitch, however, last night the card went blank on me again. All software, data, etc on the card is completely gone.
My question are: has anyone had this problem? Is this a known thing with the phone? Do I have a virus? Am I a blithering idiot that did something stupid (likely)? How do I keep this from happening again?
TIA
it's a known issue with some WM2003 versions ... what's yours ?
Try to keep the SD locked
that's $#%*#
my phone is wm2003, I guess I have to go get an SD card with a lock on it. The one that came with the phone does not. Any way to do a software "r/o" mode?
tia
one more thing
if it's a know problem with certain versions of wm2003 - what version should I get and install to keep this from happening?
tia
Nothing 100% confirmed but TMO 4.01.00 or AT&T 30.09 are said to be more stable
i have a similar proble; the unit didn't recognize the card once it was removed.
Does anyone have the files and can post so i can write on the sd?
Hello,
The same thing happened to me last week on my T-Mo MDA2 (Rom Version: 1.60.00WWE, ROM date: 12/03/03) but in my case I'm using a 128MB MMC with no hardware lock.
Any suggestions aside of using a lock enabled SD Card? (which I think it's dumb since I need to be constantly writing to the card)... :roll:
Regards,
Rayan
I used Kingston 512M SD card with ca. 200 M of MP3 files.
After removing of PocketMusic from MDA these files become invisible in Explorer as from desktop as and from mobile, despite new MP3s added to this card, were assigned to Windows Media.
Then I used SoftWinter StorageTools to format SD as FAT32/512Kps. Since formatting SD works well and I haven't any file lost.
May be this problem appears due to adding or removing some programs, associated with such files?
The weird thing is that some people report missing the files in the card but they know the files are still there because the memory space they used to take is still there, and others (my case) the card got totally wiped releasing all the memory space just as if it was just formated. :shock:
The only thing I can think of, in my case is that since the card was formated by a Palm Tungsten T2 (I could tell that because a friend lend it to me and he has a Palm and also I could see some Palm directories in the card) and I didn't formated before I used it on my MDA2. Do you think this may have caused the problem?
Thanks!
To solve this annoying problem do either(or both ) of the foillowing
1) Change the today theme to windows default (hard to believe i know but it works)
2) Using Storage Tools format the SD card to fat 32, with Backup Fat option ENABLED (you can change the theme back if you want after this)
I know its odd but i havent had this problem since then
SD Card problem
Hi,
My MDA II does not read any SD / MMC card maybe I am missing fatfs.dll file - anybody can send it or give advice please.
Leonid
Re: SD Card problem
Leonid said:
Hi,
My MDA II does not read any SD / MMC card maybe I am missing fatfs.dll file - anybody can send it or give advice please.
Leonid
Click to expand...
Click to collapse
The same happened to a friend of mine.
I suggest you to try Pocket Mechanic from http://www.antontomov.com, with this software you can format, verify and repair your storage cards. We did this and the card worked successfully after a Low Level Format and then a Logical Format.
Good Luck!

Not quite BRICKed but..no mem. & error [224]

Hello,
FCWs 6.5 Home edition 8325,2gig
Long story involving a 5 year old.
Basically right now I can only fire up in sort of a limp mode; "low on memory" or no "permission". Probably due to scores of "FILE000x.chk" files on the device after using Pocket Mechanic Pro on microSD card.
1) It'll only reliably boots with a battery out/in technique.
2) Its "connected" to desk-top PC but as a "guest" and isn't "synced"
3) I can browse it through ActiveSync on the PC, but can't add, move or delete files due to "low memory" or "permissions" (same on the 8525)
4) A few programs won't run and are not recognized as "valid P-PC" apps, including the front end "home2"
5) Can't flash anything as SSPL ROM flasher gives "ERROR [224]: device not responding".
Started with a corrupt 2 gig microSD, couldn't write to it, ran Pocket Mechanic Pro. that Problem solved, this prob created.
Read all Wikis, searched error 224, reflashed about 15 times, know the ropes.
Any Ideas are greatly appreciated!
Regards, PK
Have you tried flashing the rom from the memory card, its the only thing that i can suggest i don't know much about broken hermes.
Hope this helps and that you find a fix
Thanks for the reply Scott,
That was my next line of attack but I'm not clear yet on exactly how to do it (I'll find out).
My big problem is I can't add (or remove or even move) any files on the device either from File explorer on the phone or through. ActiveSync on the pc (I can look at them though...). I also dont have a card reader writer.
I think a lot of problems would go away if I could delete all the 200+ *.CHK files generated by Pocket mechanic pro. I think that where all my memory went.
I just found a way using delete feature in "RAR" ...6 down 200 odd to go. Antone know how to select multiple files?
Regards, PK
Regards, PK
Now its in solitary
I managed to delete 219, *.chk files from the rom hoping to free up memory. I'ts still isolated, I cant add any files to it (like a ROM or utility) through activeSync. The warning is it "can't find the file or path." of the file. To flash a rom from I still get "error 224," don't recognize the device.
Tried to load the SD card with a rom through my camera, no luck, the camera says "cannot flash".
The OS still works in a limp mode, no phone, half the programs inaccessible and home2 no longer works.
Fun.
PK
Have you tried connecting the card to the computer and reformatting it from there you might then be able to flash another rom
Thanks,
I don't have a card reader. The only thing I do have is a printer that accepts multiple card types and a camera that takes this card. So far I can't right to either.
Ya, theres a thread that tells how to flash from a card. Right now though its just of limits.
Thanks, PK
Edit: just got card reader.
Have SD Card with rom can't boot off it and install.
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
pk2 said:
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
Click to expand...
Click to collapse
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Thanks alot for the reply,
I think you are the man! I did change the name but changed it to HERMING.NBH not HERMIMG.NBH. It seems to be flashing (slowly) right now.
If this works I owe you a BIG cerveza!
Regards, PK
vijovame said:
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Click to expand...
Click to collapse
Vijovame,
You are definitely the man.
I flashed the plain Jane stripped ATT ROM but EVERYTHING WORKS! It syncs, the phone works, camera, etc, etc...Now I'm off to flash something interesting.
Thanks for making me re-read the .nbh name. (I've been trying to fix this about half the time I've owned it...my first smarphone)
All the best!!
PK
its good to hear that youve sorted it, theres a few roms out there at the moment so you may have to look around a bit and flash quite a few of them, the safest way is the card method but it is up to you.
Have fun with your hermes
Scotty,
Ironically I had already blindly flashed just about everything out there without a hitch. I finally settled on one. That's when all 'ell broke loose. Now I've got the stripped ATT on my flash drive ready to install anytime if I have to.
Thanks, PK

Unable to save any type of files after rom upgrade and backup! Pls Help!

Hi, I have an HTC HD2 which I recently upgraded it rom ver. 1.66.415.9. I used spb backup to get my main memory files. Somehow, in a way, I was able to get all of my files anfd programs with windows settings and registry using ROM upgrade mode without changing the rom version back to the old one. But the then when I took pictures then tried to open them in albums, they weren't saved. A probition sign (circle-backslash "no" sign) showed up. I tried to open it but an error shows up saying "unable to open this type of jpg file" and then the sign diappears, as if the image wasn't saved. I even tried saving a note file. After saving, I opened it but instead of showing the notes I wrote, symbol characters showed up as if the file was encrypted. After rebooting my mobile, the note file wasn't there. I still have enough storage space to save more files and pictures. Did anybody face the same problem that I did? Please help me and thank you in advance.
Can anyone please help me? This is really stopping me from being productive!
i would suspect the file associations / locations have been corrupted, probably by restoring the registry from a different rom.
(Registry really ought only to be copied over to fresh resets of the same rom, not new roms. It can be done, but its prone to issues just as you describe)
AND/OR
the image library files have become corrupted. Look in your image folders, and delete album.cache files. They will be automatically rebuilt.
I would try to consolidate what you have as it is now, if your files are all there, and your contacts are there, backup your contacts by some means, ensure all your files are on the sd card, and hard reset.
I have hard reset my mobile a couple of times, even before restoring the pim data without the system settings, the camera would take a picture but the picture wouldn't be saved on the sd. But after I restored everything, I thought of uninstalling resco file explorer (thinking that it was the problem) and deleting the library files, but nothing changed. But when I thought of formatting the sd card, I tried to reinstall resco explorer as it has a formatting feature. At first when I tried to install it to the sd card, it failed to install, but it was installed successfully in main phone memory. I opened resco and went to the formatting option. Once I started formatting, an error messege appears saying "Failed to format sd card. Please make sure that the sd card is not locked." Does this mean that if I formatted my sd card, the problem would be fixed? BTW, my sd is on a FAT sytem. To which type should I format the sd?
Thanks in advance
hmmm sounds like a funny sd card then.
use fat32
Seems to be the sd-card.
When I upgraded my ROM from 1.48 to 1.66 I restored main mem with everything with SPB-backup-file and everything worked fine from the beginning (except in setting tab still shows the info that old 1.48 ROM is installed).
Hope You made a backup of Your sd-card. So format sd on PC and copy back all files, should work then....... hopefully .......
ok now that's just wierd! I tried formatting the sd using the laptops card reader with the micro sd adapter, but an error appeared saying "Windows was unable to complete the format". I tried deleting the files but the laptop froze. I had to remove the sd to get it back working. Then I used a usb card reader. Some problem. Finally, I used the phone via the usb to format the sd. The error appeared again, but there was no problem when delelting the files. But after I tried reformatting it, the error appeared and the files on it also! It's as if there's a lock switch inside which the micro sd shouldn't have. What should I do in this case? Is there a program or a file that can unlock it?
Thanks in advance.
This is really irritating. My card doesn't allow me to save or delete anything. Formatting didn't work. I even tried a program to detect a fault on it but nothing shows up. All formatting programs freeze when I start formatting my card. Deleting any file doesn't work as it is restored after resetting my mobile, and finally, no body has faced such a problem. What should I do?

Need Help.

Merry Christmas for All.
I have Problem in my device HD2, that I have message when I turn on the device to format my Memory and I can't find my memory and I lost all data in it.
So, Could you help me please to install new Rom.
Best wishes.
Here on this sticky thread you can find the needed information sir.
Merry Christmas for all.
I Have problem in my HD2, that I get message to format my Storage Card but I can't format it and I can't find my storage memory, How can I format it or Install new flash or Rom?
Please, thanks for your help
I checked your link and I did download the flash but it doesn't work. more details please?
All the details you need to flash a new rom are there in the link provided. Go and read the first few posts carefully. A little more detail from you would also help such as what rom are you running, what spl version, what radio version, what model HD2 etc etc etc.
You also say you tried to flash and it didn't work. What didn't work? What error messages did you get etc. It really is impossible to help you with the details you have (or haven't) provided. Also, you should not be starting a new thread when there are dedicated threads already provided to help with flashing problems.
Dear Clyde,,,
Thanks for your reply, I will list what I know about my device.
HTC HD2 T8585
OS 5.2.19202525.0
ROM version 1.43.405.1 (70124) WWE
Radio Version 2.04.50.22_2
Protocol Version 15.26.50.07 U
spl version 1.66
The message is when I turn on the device asked me to format the storage memory and I click on (yes) it says that the format complete but it isn't,
In addition, when I try to connect the device with my laptop, the message for format again on device and also in my laptop to format the storage memory. then I try to format it form laptop it's doesn't work.
Finally, I can't find the storage memory anymore in device browsing.
So, I think it good detail please explain to me what you need more...
Best wishes.
Could be a duff microSD Card.
Remove card, switch on phone - any problems?
Put the card back in, switch on phone - any problems?
If you can, then put the microSD Card into a SD Card Adapter and connect it to your computer. Try fromatting it (not quick format) - any problems?

Categories

Resources