Gene_Kitchen_6.5_Beta.rar
Gene_Kitchen_6.5_Beta.rar ( mirror )
how to use
if you have new gene
open Gene New folder
copy folder in OEM folder to root OEM folder (OEMXIP_Package,.VM,.ROM)
copy XIP folder in root ROM folder
run build_xpr.cmd to buld rom
if you have new gene
open Gene Old folder
copy folder in OEM folder to root OEM folder (OEMXIP_Package,.VM,.ROM)
copy XIP folder in root ROM folder
run build_xpr.cmd to buld rom
Thanks .
very very thanks
GENE_KITCHEN_6.5_BETA years in order to prepare.please help thank you
Thks for share this mobile os with the ppl.
need ur advise pls
hi
CAN some one help me pls see below my problem and advise
i tired this i have old gene but some were halfway through it said error
as im using Win vista on my comp do i need to do anything extra for the same to work kindly adivise
[*]open Gene Old folder
[*]copy folder in OEM folder to root OEM folder (OEMXIP_Package,.VM,.ROM)
[*]copy XIP folder in root ROM folder
[*]run build_xpr.cmd to buld rom
Thanks! What about page pool change??
Sorry for my bad english...
thanks very much!
that is very good
sm1 help i am getting problem....wen i did all d above steps copy paste etc..click on build_xpr.cmd sm prob cmes
**This system cannot execute the spicefic program
BuildDos! aborted**
sm1 plz help!
hi
Gene_Kitchen_6.5_Beta.rar please any one can give me a exe file
@Soni: There is nothing like exe file. You will get a .nbh file which is updated through ROM update utility.
Please read some of the threads for updating the ROM else you may brick your HTC Gene device. Also ensure that you are using the right version (OLD or NEW GENE).
@soni:
Read the Guide at top of the page, sunny. Its for all noobs to read. Otherwise it wouldn't be there in the first place .
@addicted & techmate
hi
this never worked for me can u chek on page 1 i have explained i asked ankit no reply as of today can u guide me on the same look at 1st page i have posted my problem
Addicted2xda said:
@soni:
Read the Guide at top of the page, sunny. Its for all noobs to read. Otherwise it wouldn't be there in the first place .
Click to expand...
Click to collapse
me also getting problem
i am notable to build .nbh file.when i click,on build_xpr file,sm error cmes
I have tried this kitchen, and worked fine, but when I add some packages to the SYS folder, they wont build in the rom. In buildOS, I can see those packages are unchecked(while cooking).
How can I add packages to the rom?
^Xumit: Remove the file option.xml from your packages. You wont see them listed in the build os then, but the packages will compile fine. This file is responsible for that description appearing in buildos and by defualt it has option set to not compile the package, for some strange reasons. So if you dont want to show the package in buildos gui, which is of not much use, just delete this file. Otherwise, change the option inside it to include the package.
Xumit said:
I have tried this kitchen, and worked fine, but when I add some packages to the SYS folder, they wont build in the rom. In buildOS, I can see those packages are unchecked(while cooking).
How can I add packages to the rom?
Click to expand...
Click to collapse
change false -> true in option.xml
Many many thanks to both of you.Just amazing!
can some one advise pls
hi
CAN some one help me pls see below my problem and advise
i tired this i have old gene but some were halfway through it said error
as im using Win vista on my comp do i need to do anything extra for the same to work kindly adivise
[*]open Gene Old folder
[*]copy folder in OEM folder to root OEM folder (OEMXIP_Package,.VM,.ROM)
[*]copy XIP folder in root ROM folder
[*]run build_xpr.cmd to buld rom
Closed as per OP Request.
Dave
Related
Tools I have tried so far to cook a personalised ROM for my Gene: (Authors name mentioned in green)
Tool to dump OS.nb and ExtROM.nb directly from Gene to SD card - Attached. Usage information here (Orefkov)
Tool to edit registry (default and user rgu files) for Gene - In this forum here (Orefkov)
HyperCore Kitchen from Anichillus (Includes the PKGTool, IMFG Tools and BuilOS) Device & Settings txt files for HyperCore to cook for Gene are attached here (Anichillus)
MSFlshTool from Scoter Kitchen for extracting the XIP out of OS.nb (procedure) (Scoter Kitchen)
Tool for extracting XIP out of OS.nb properly with procedures here (Anichillus)
XIPTool for dumping the extract .bin file and XIPPort tool for porting the core - Attached (Bepe)
Tools for relocating modules and files in XIP found here (Misar)
BuildOS tool from Kaiser Kitchen (Its got package tool and porting tool built-in) (Alex)
BenThon's MSCEInf and Ervius Package Creator to the for creating OEM Packages out of Cabs. Tutorial refered to creating the packages is here (Ervius & BenThon)
HTC ROM Tools for creating final .nbh file - Attached (Dutty)
FlashBootSplash tool for creating first splash screens - Attached. Usage information here (Vukile)
TFAT Image Editor for editing ExtROM (author unknown)
HSPL for Gene to be able to flash custom ROMs here - (procedure) (Olipro)
Excellent guidance for upgrading Gene ROM by Mobix here (Mobix)
I know there are a lot many other files for editing the rgu files and creating hv files but I didnt try them. I dumped the ROM successfully and still learning to delete or add packages. Although I am not saying that I successfully flashed my Gene with the ROM I cooked, but learning never stops till someone expert comes along to explain things and to guide us cooking wannabes to a nice kitchen and a nice personalised ROM Your suggestions and guidance and advices are all more than welcomed here
The post below is where I am going to post the packages I create and the one below that is where I am going to put up the problems I face so no one else will repeat and brick their phones
Also attached the original Gene RUU, just in case
I did my part of dumping the OS.nb in HyperCore as mentioned in anichillus's thread here. Then I used the package tool to make packages from the dump and transfer the SYS and OEM folder to Build. I haven't yet mastered the art of adding or deleting the packages here but I certainly deleted the useless images and theme files which eats up space. Post that I did the BuildOS which created the OS-New.nb very nicely. Used HTCrT tool to create the new RUU_Signed.nbh with the OS and ExtRom. While flashing the RUU showed "Flash Write Error" at about 99%. Need guidance after or prior to that, although will not stop trying and will keep posting the progress so far here
OEM Packages created by me
(A) OEM Packages created by me with Alex's procedures:
DciNoBar
FTouchFlo_V1_4_1
FTouchFloConfig_V0_9
HomePluginWM6
LG_Today_Buttons-ENG
PCMKeyboardEN-0_13
Schaps_AdvancedConfig_v2_1_0_0
SMSDRFixWM5
Spacer2_ARM
DOWNLOAD Package A
Problems I have faced so far
When I tried to recreate the hive files (default and user) Problem was faced in default.hv. Attached CMD screen, default.rgu and boot.rgu file - Solution: Found by Orefkov here
After I tried to flash my Gene with my custom cooked ROM, it left me with a blank phone. Although I passed the 1st splash screen then it was blank - Solution: Found by Anichillus here
Thanks to following experts for guiding me and lending a helping hand
Anichillus, Villaboy25, Nirvana1981, Orefkov, C_Shekhar
@ammet .. from where do we get OS.nb file ?? all i have is the WM6 .nbh file.
mobix said:
@ammet .. from where do we get OS.nb file ?? all i have is the WM6 .nbh file.
Click to expand...
Click to collapse
updated the first thread on first point sorry, forgot to add in first place
Error at 99% of flashing - dont use Tadzio imgfs tools, its make smaller nb file, and its not work on gene. Use mamaich's imgfs tools.
orefkov said:
Error at 99% of flashing - dont use Tadzio imgfs tools, its make smaller nb file, and its not work on gene. Use mamaich's imgfs tools.
Click to expand...
Click to collapse
that is great inputs my friend.. can u be kind enough to also post the link to these tools? please.. it will be easier to arrange for all readers
@orefkov
did your gene comeback?
did it die?
Work with registry.
Some key's names in gene registry have '\' (slash) symbol in it.
Rgucomp dont work with this. You need replace '\' in key's names on '\\'.
I write simple script for it.
try to make the chs rom ver.
but need your help.
nirvana1981 said:
@orefkov
did your gene comeback?
did it die?
Click to expand...
Click to collapse
My old gene is die, but Im got money back and bay new gene.
guys.. i request you all to post your inputs as simple as possible so every noob can also understand your expert inputs u guys are cool
nirvana: what is chm rom?
orefkov: what does the regedit do and what should be edited exactly?
did you try to enlarge the rom , del the extrom ? it's unuseful.
orefkov said:
Work with registry.
Some key's names in gene registry have '\' (slash) symbol in it.
Rgucomp dont work with this. You need replace '\' in key's names on '\\'.
I write simple script for it.
Click to expand...
Click to collapse
did u check my third post for the solution that is not yet found? can u guide us all on that problem?
can use it ,and make extrom work. got 10m free.
nirvana1981 said:
can use it ,and make extrom work. got 10m free.
Click to expand...
Click to collapse
brother... please tell us all what u guys talking about also how do we also claim that extra space and did u reply to the pm i sent? please
ababrekar said:
did u check my third post for the solution that is not yet found? can u guide us all on that problem?
Click to expand...
Click to collapse
Just download this archive, and read readme.txt in it.
orefkov said:
Just download this archive, and read readme.txt in it.
Click to expand...
Click to collapse
i did download ur archieve... saw the readme.. so should i just run both batch files without editing anything? i dont need to edit anything right?
by the way.. updated the first post with the archieve, it will be easier for others to follow
after fighting for few hours and numerous changes i was able to complete the first step, of getting OS dump using Hypercore Kitchen. Now it seems I'll have to redo some part again tonite !
mobix said:
after fighting for few hours and numerous changes i was able to complete the first step, of getting OS dump using Hypercore Kitchen. Now it seems I'll have to redo some part again tonite !
Click to expand...
Click to collapse
orefkov has posted a reply here in above post... check it out http://forum.xda-developers.com/showpost.php?p=1963703&postcount=6
Hello, users of xda !
I have some questions about constructing my own ROM:
1. How to kill link Windows Media in Star Menu-Programs? Windows Media is not package and i can't edit his initflashfiles.txt file. So where I can kill his link?
2. How to add information about ROM, add image in setting About and modify copyright. See the pictures.
3. How to change waiting animation?
I will be very glad to everybody who would answer my questions!
mmmm ask to utaker VIA PM or in his kitchen thread
this has been modded in a file called Shellres.XXXX.mui Hexadecimal
to change the Windows animation you can find it inside a file called shellres.dll open it with a reshacker or PExplorer
to change the Windows media lnk just go to the media folder in sys and check for the RGU that has the lnks adress or make a shortcut in your functional rom to the place you want it... the go to that folder... and rewrite the existent lnk oh!
and delete its extension.
+ Que PPC said:
mmmm ask to utaker VIA PM or in his kitchen thread
this has been modded in a file called Shellres.XXXX.mui Hexadecimal
to change the Windows animation you can find it inside a file called shellres.dll open it with a reshacker or PExplorer
to change the Windows media lnk just go to the media folder in sys and check for the RGU that has the lnks adress or make a shortcut in your functional rom to the place you want it... the go to that folder... and rewrite the existent lnk oh!
and delete its extension.
Click to expand...
Click to collapse
Hi + Que PPC.
Sorry but I'm a Newbie and trying to navigate the site.
Having great difficulty (its so large & packed full of goodies.
Already an issue.
Acquired a TyTn/Hermes (UK Orange SPV M3100) and find that the Microphone does not work during calls.
It will work when Recording Notes.
The headset works OK for calls and Notes.
Recently the Microphone started working fine for 5 mins with calls and then would not work.
Is this a common problem ?
Can it be fixed Software wise.
Is it better to use a MicroSD Card to flash a new ROM
Is it better to use the HTC ROM first.
What is the best (Stable) WM version WM6.0, 6.1 or 6.5?
And what about TouchFlo.
Can I get that installed as well ?
Sorry about posting in the wrong place.
However I do a lot of voluntary work in the Third World.
(will be travelling soon !)
Most of the posts are quite old.
I am trying to find a Senior Member on the site.
Is there Personal Messaging Available.
Please direct me to it.
Thanks in Advance
+ Que PPC said:
this has been modded in a file called Shellres.XXXX.mui Hexadecimal
Click to expand...
Click to collapse
No, after I modify this file with Restorator and rebuild ROM I didn't see any changes, because you need to modify file S000 in folder of Shellres.XXXX.mui which, I think, is clone of Shellres.XXXX.mui... I can modify it ONLY with HEX editor, but it is very difficult, and more easy to edit file Shellres.XXXX.mui with resource editor.
Maybe somebody know tool to convert Shellres.XXXX.mui to S00* files?
+ Que PPC said:
to change the Windows animation you can find it inside a file called shellres.dll open it with a reshacker or PExplorer
Click to expand...
Click to collapse
Can you write exactly path to this file, because I tried to open some file called shellres.dll, but I didn't see any waiting animation in it to replace with my one...
+ Que PPC said:
to change the Windows media lnk just go to the media folder in sys and check for the RGU that has the lnks adress or make a shortcut in your functional rom to the place you want it... the go to that folder... and rewrite the existent lnk oh!
and delete its extension.
Click to expand...
Click to collapse
I didn't understand you... RGU files only contain reg links, not files... File links, as I know, exist in initflashfiles.txt...
Code:
No, after I modify this file with Restorator and rebuild ROM I didn't see any changes, because you need to modify file S000 in folder of Shellres.XXXX.mui which, I think, is clone of Shellres.XXXX.mui... I can modify it ONLY with HEX editor, but it is very difficult, and more easy to edit file Shellres.XXXX.mui with resource editor.
Not the folder man! the mui is already tranfomed into module... by that folder and its S000X files! search for the mui file! in your oem packages
When i get home i can provide you the path... but... wich app did you use to open it? open all the ress dlls maybe one of those is the good one. is in the oem folders.
Well so do the shortcut trick i told you then... or try editong the initflash files in lang XXX folder in your oem packages.
Sampler100 said:
Hi + Que PPC.
Sorry but I'm a Newbie and trying to navigate the site.
Having great difficulty (its so large & packed full of goodies.
Already an issue.
Acquired a TyTn/Hermes (UK Orange SPV M3100) and find that the Microphone does not work during calls.
It will work when Recording Notes.
The headset works OK for calls and Notes.
Recently the Microphone started working fine for 5 mins with calls and then would not work.
Is this a common problem ?
Can it be fixed Software wise.
Code:
Well its not a common issue maybe you need a new ROM
Is it better to use a MicroSD Card to flash a new ROM
Code:
I never upgrade VIA SD card i dislike it cause... i just have one! :) hahaha
Is it better to use the HTC ROM first.
Code:
What do you mean by first the HTC ROM?
What is the best (Stable) WM version WM6.0, 6.1 or 6.5?
Code:
I cant tell you cause the people says this... and this and this... so people has his favourites! try it all!
And what about TouchFlo.
Code:
Touch flo as is... its old... touch flo is the enhancement to roll in menus if you mind in Manila i can tell you... is nice but slow.
Can I get that installed as well ?
Code:
You can get installed manilla inside a 6.5 ROM or 6.1
Sorry about posting in the wrong place.
However I do a lot of voluntary work in the Third World.
(will be travelling soon !)
Most of the posts are quite old.
I am trying to find a Senior Member on the site.
Is there Personal Messaging Available.
Please direct me to it.
Thanks in Advance
Click to expand...
Click to collapse
Yes you can PM me just click on my username and sent private messages... BTW hope you are HARD SPLED FIRST before you try to upgrade... once you can find the important threads to unlock your phone everything goes fine in WIndows mobile 6 subforum for hermes tytn.
This is the kitchen I am currently using to build my rom series, my main reasons for releasing this are to try and progress development of 6.5 builds on the athena.
I am going to assume that if you have in depth knowlege to rom building that you would have probably put your own kitchen together, so please dont post questions etc if you have tried to do something out of your comfort zone i.e porting new builds(this is a bit more involved)
The kitchen contains saved builds of my latest releases, 23060 and 23053, load whichever you wish and add and remove packages etc, I will try and assist as much as I can.
There are many guides on ervius kitchen I would suggest reading them if you are new to it.
My hope is that we can resolve the few remaining issues I have in a more efficient way than me spending 5/6 hours every night building and testing roms, the main existing problems are:
DRM
Manila
Autorotation
All the saved config files have been recmodded to attain max slot 0 memory allocation, I would not advise recmodding any more modules as this will probably cause a non booting rom.
I will try and update with latest versions with a config file as they become available.
Please do not release roms into the forums, my intention is that you use it to learn and build your own spec roms
Download Link!!!!!
http://www.megaupload.com/?d=YI469SR4
***PLEASE NOTE***
THIS IS NOT FOR PEOPLE WHO DO NOT UNDERSTAND WHAT THEY ARE DOING, YOU RUN A HIGHER RISK OF BRICKING YOUR DEVICE IF YOU GO IN BLIND, AS WITH ROMS THIS IS FOR SPL3.5 DEVICES, I AM MORE THAN HAPPY TO ASSIST ANYONE WHO NEEDS IT PROVIDING YOU ACCEPT I CANNOT GIVE ALL MY TIME TO THIS AS I HAVE A FAMILY AND A JOB TO LOOK AFTER, IF YOU NEED HELP I CAN WALK YOU THROUGH IT VIA MSN ETC
******Reserved************
********Reserved*********
Lol, first hurdle, the kitchen is 802mb and sendspace wont allow me to upload more than 300mb
anyone got any ideas
can you upload a torrent?
ZIP > split > upload parts?
Split to 100MB parts and PLEASE upload it to Rapidshare
Thanks
you can rar/zip and split it into 250MB parts (less parts to download than to have each part at 100MB) or you can upload to torrent (but we would need seeders....the dedicated file servers are a better option though)
I managed to reduced the size somewhat and its now on megaupload, the link is now in the first post.
For those wishing a beginers course, I am going to try and do one tomorrow, but will start a seperate post for it.
I have not tested this kitchen but it should work fine.
hey avenger, will you be including the new 23071 build in the kitchen or for additional download? also does the kitchen offer xip and sys porting?
lennie said:
hey avenger, will you be including the new 23071 build in the kitchen or for additional download? also does the kitchen offer xip and sys porting?
Click to expand...
Click to collapse
I will probably build a 23071 rom tonight and see how it looks, then consider releasing it into a kitchen, yes the kitchen offers sys and xip porting, but it needs a couple of things doing to get it to work with the athena kernel
avengerpenguin said:
I will probably build a 23071 rom tonight and see how it looks, then consider releasing it into a kitchen, yes the kitchen offers sys and xip porting, but it needs a couple of things doing to get it to work with the athena kernel
Click to expand...
Click to collapse
As I asked in private messages. can u make a tut for this specially how to work with your kitchen xip/sys porting section?
for some reason the kitchen seems to stop being able to port over a xip...I don't know if the copy I had somehow got corrupted on my drive but I'm going to redownload and try again.
has anyone else been having the problem?
lennie said:
for some reason the kitchen seems to stop being able to port over a xip...I don't know if the copy I had somehow got corrupted on my drive but I'm going to redownload and try again.
has anyone else been having the problem?
Click to expand...
Click to collapse
Lennie, this happened with my x7510 kitchen as well, the fix is to open the xip exporter tool bottom left of kitchen, there should be a button called something like, extract from payload? use that to extract the xip.old and see if that works
avengerpenguin said:
Lennie, this happened with my x7510 kitchen as well, the fix is to open the xip exporter tool bottom left of kitchen, there should be a button called something like, extract from payload? use that to extract the xip.old and see if that works
Click to expand...
Click to collapse
yeah it's there, but doesn't that mean I would have to have the os.payload for the newer rom that I want to get the xip from?
if I get a rom with build 28008 can I then use the kitchen to extract the os.payload and then use that to extract the xip.bin then use the xiporter in the kitchen and extract the xip? if i do that would it mess up the kitchen in anyway?
lennie said:
yeah it's there, but doesn't that mean I would have to have the os.payload for the newer rom that I want to get the xip from?
if I get a rom with build 28008 can I then use the kitchen to extract the os.payload and then use that to extract the xip.bin then use the xiporter in the kitchen and extract the xip? if i do that would it mess up the kitchen in anyway?
Click to expand...
Click to collapse
Sorry I thought you were having a different error relating to xip.old, from your pm I am assuming your not able to port the new xip.
I have used the msxip folder that comes with rom dumps to some success in the past by creating a new folder in kitchen/rom/shared/*create folder with new build number* copy the MSXIP Kernel folder into here for your new xip supplied with dump, and copy the packages.txt file from a working folder from another build.
(This is the new XIP files)
Then go to kitchen/rom/ATHE100/ *create folder with new build number* copy the OEMXIPKernel and packages.txt from a working ATHE100 folder into there.
(This is the old device specific xip part dumped from original rom)
You should find that you now have the new xip in the dropdown box of the kitchen, however I have found this very hit and miss and am currently struggling with porting 28014 using this method. If you search there are bits of advice about other tools able to dump XIP's that VK is not able to do, but I have not had the time to fully research it.
Let me know how you get on as my kitchen is currently crashing whenever I try and do this.
*Just found this http://www.everythingdiamond.info/showpost.php?p=2879&postcount=2 * See if this helps
avengerpenguin said:
Sorry I thought you were having a different error relating to xip.old, from your pm I am assuming your not able to port the new xip.
I have used the msxip folder that comes with rom dumps to some success in the past by creating a new folder in kitchen/rom/shared/*create folder with new build number* copy the MSXIP Kernel folder into here for your new xip supplied with dump, and copy the packages.txt file from a working folder from another build.
(This is the new XIP files)
Then go to kitchen/rom/ATHE100/ *create folder with new build number* copy the OEMXIPKernel and packages.txt from a working ATHE100 folder into there.
(This is the old device specific xip part dumped from original rom)
You should find that you now have the new xip in the dropdown box of the kitchen, however I have found this very hit and miss and am currently struggling with porting 28014 using this method. If you search there are bits of advice about other tools able to dump XIP's that VK is not able to do, but I have not had the time to fully research it.
Let me know how you get on as my kitchen is currently crashing whenever I try and do this.
*Just found this http://www.everythingdiamond.info/showpost.php?p=2879&postcount=2 * See if this helps
Click to expand...
Click to collapse
ok thanks. I'm giving it a try now, I put all the files in the place they're supposed to go however, I forgot what extension to rename BatchRecmod.jpg to (the file you had sent me)
EDIT: if I remember correctly BatchRecmod was a folder that you added the .jpg extension so you could send it to me, however, when I remove the extension I still can't access the contents inside...
lennie said:
ok thanks. I'm giving it a try now, I put all the files in the place they're supposed to go however, I forgot what extension to rename BatchRecmod.jpg to (the file you had sent me)
EDIT: if I remember correctly BatchRecmod was a folder that you added the .jpg extension so you could send it to me, however, when I remove the extension I still can't access the contents inside...
Click to expand...
Click to collapse
A better option than the batchrecmod I sent you would be to search Da_g's thread in dev/hacking for an addition to the kitchen made by user XTEP it adds the recmod function to the extra buttons inside the kitchen.
However if not change the .jpg extension to .zip and then unzip and you should have the files you need
avengerpenguin said:
A better option than the batchrecmod I sent you would be to search Da_g's thread in dev/hacking for an addition to the kitchen made by user XTEP it adds the recmod function to the extra buttons inside the kitchen.
However if not change the .jpg extension to .zip and then unzip and you should have the files you need
Click to expand...
Click to collapse
thank you very much, I think I found the addition by xtep in da_g's thread but I don't see how to add it to the kitchen...so I used the the files from the zip you sent me....I tried to cook and everything seemed as if it was going just fine, then bam! kitchen crashed. I'm going to try and get a working xip.bin to and see if the kitchen can extract it because using the msxipkernel does not seem to be a stable method.
lennie said:
thank you very much, I think I found the addition by xtep in da_g's thread but I don't see how to add it to the kitchen...so I used the the files from the zip you sent me....I tried to cook and everything seemed as if it was going just fine, then bam! kitchen crashed. I'm going to try and get a working xip.bin to and see if the kitchen can extract it because using the msxipkernel does not seem to be a stable method.
Click to expand...
Click to collapse
I have been struggling with this as well, I have not managed to find a portable xip.bin for 28014 as of yet. If you find one let me know please.
Hi,
I have been using a few kitchens but none of them can dump its own generated ROM back, what I did is:
1. use this kitchen to create RUU_SIGNED.NBH.
2. use this kitchen to dump from NBH file just created.
3. No OEM and SYS directory are created or the directory are created but no files inside.
Can anyone recommend a kitchen which can have files sorted to OEM and SYS in step 3?
Why
HTC_FUZE said:
Hi,
I have been using a few kitchens but none of them can dump its own generated ROM back, what I did is:
1. use this kitchen to create RUU_SIGNED.NBH.
2. use this kitchen to dump from NBH file just created.
3. No OEM and SYS directory are created or the directory are created but no files inside.
Can anyone recommend a kitchen which can have files sorted to OEM and SYS in step 3?
Click to expand...
Click to collapse
Hey HTC_FUZE, Why do you want/need to dump your own ROM? Surely if you have the kitchen - the OEM and SYS are already there! Why don't you just recook with the changes that you want to make to it?
If your trying to dump somebody else's ROM then it may be protected. Some chefs protect their ROMs from being dumped.
Secc
just in case my hdd is dead or files corrupted, so I still have chance to extract rom from my phone and get the same dump as before
Ahhhh...
HTC_FUZE said:
just in case my hdd is dead or files corrupted, so I still have chance to extract rom from my phone and get the same dump as before
Click to expand...
Click to collapse
My best advice to you is to do what i do BACK UP!!! When i first started i never backed my kitchen up, then i lost my whole kitchen, had to start from scratch!! Now, every couple of builds i backup the whole kitchen to a rar and save on a external drive.
A few weeks ago my working kitchen got corrupted somehow, i just restored the rar, imported the new build and was cooking again in no time - without the backup, i'd be knackered!!!
Secc
The OEM folders unfortunately end up in the SYS folder when you dump them. Simply pull them out and put them into the OEM folder and you're set. Something to do with the kitchens recreating the DSM's incorrectly.
@jwzg:
Correct; unfortunately, most kitchens strip the .DSM/.RGU during ROM compilation. Ervius tried to implement a method to preserve the .DSM/.RGU for decompilation but it didn't work as he'd hoped.
@HTC_FUZE:
You need to backup your working kitchen; unfortunately there's no other way. I usually do the following:
File copy the kitchen to a backup HDD
File copy the compiled .NBH I used on the device to a backup HDD
.RAR the kitchen
You could go one extra step and burn the lot to a CD/DVD.
HTH,
This is what I am doing now. However, I would like to have such a kitchen I mentioned. I found one of the ROMs I downloaded can be dumped and sorted like official ROM. I may ask him which kitchen he uses.
I have a Wizard ROM which can be dumped like this. It was made with with an old kitchen that is incompatible with newer devices.
jwzg said:
I have a Wizard ROM which can be dumped like this. It was made with with an old kitchen that is incompatible with newer devices.
Click to expand...
Click to collapse
Hi, Jwzg:
If it is working with Fuze, I would like to have it. Could you give me it? Thanks
i needed some much needed help with installing diniks new rom , here is what i know how to do so far. I downloaded the file and copied it to my sd card , then i made a new folder on my sd card and copied the rom to it , thats as far as i can get. Im guessing the part where i need help is where is says Create a folder on your SDCard with name Autoinstall and place all your CABs & XMLs there, after flashing, your CABs and XMLs will be autoinstalled.
I donot understand when it says place your cabs and XMLs after flashing into the autoinstall folder . What is cabs and xmls and flash . I have read the directions but is says nothing about what all this is so i would appericate it if someone could help me ...
freakyd9984 said:
i needed some much needed help with installing diniks new rom , here is what i know how to do so far. I downloaded the file and copied it to my sd card , then i made a new folder on my sd card and copied the rom to it , thats as far as i can get. Im guessing the part where i need help is where is says Create a folder on your SDCard with name Autoinstall and place all your CABs & XMLs there, after flashing, your CABs and XMLs will be autoinstalled.
I donot understand when it says place your cabs and XMLs after flashing into the autoinstall folder . What is cabs and xmls and flash . I have read the directions but is says nothing about what all this is so i would appericate it if someone could help me ...
Click to expand...
Click to collapse
Auto install is for installing games, apps and mods. you put the cab file that goes with the game or app or mod into the folder and toms autoinstaller will install it during the flash of a rom. As long as that rom supports autoinstaller. It is not nessesary to auto install anything if yo do not wish. If you are just trying to flash a rom the autoinstaller is not needed. But you will only get the customization that comes with the rom.
If I missed anything could some one fill in the blanks. I may not be that good at explaining things.