Does anyone have Best TaskMan or SPB Online installed and working?
I had s730 and it was working normally but it won't on s740. Best TaskMan starts in background but main window never opens. SPB Online opens, but when I close it, stays opened in background and can't be started again until process is killed.
Also when I use WM5torage and deactivate and close the application, then I can't use Garmin Mobile XT. When I start it, it hangs. After using WM5torage I must soft reset a device in order to be able to use Garmin Mobile XT.
For developers :
I also noticed something strange in my application that might be connected with this. I have my own application that switches applications by using volume buttons. I use SendMessage API to get window name by sending GETTEXT message. But my application hangs indefinitely when calling that function. That never happened on s730. I investigated a little bit and SendMessage hangs when I send message to a window handle that belongs to a gwes.exe process.
Related
Hello all,
I am wondering if perhaps someone knows how to stop ALL the pop-up balloon msgs in WM2003? I there is a fix to get rid of the annoying battery low pop-up, but I want them all gone. None of them are of any use to me - the title bar icons do the job just fine!
I am especially starting to hate the "can't connect to GPRS" message when I am not in an area with good reception the phone tries to automatically check my mail...
Thanks,
xnappo
there is a regestry tweak to remove that anoying battery low pop up. search around the main site not the forum and you will find it.
Yeah, I know about that one, but I would like to know if there are any registry tweak for the GPRS popups (like can't connect because I am using the phone, can't connect to check email because there is no GPRS signal - check settings etc.
Regards,
Chris
Stop GPRS connection popups
Has anyone found a way to stop the popup balloons when the device goes in and out of service or tries to connect when it is out of service?
It is annoying to try to read offline content in AvantGo or Mobile favorites and have the balloon pop-ups appear on as it tries to connect to get other content.
In addition to the popup, when my device is out of service and tries to sync my mail it also turns the device on. Since have the device set the keep the backlight on for 5 minutes it is killing my battery life when it turns on in my pocket and I don't know to turn it off.
I am using the XDA1 on T-Mobile w/ WM 2003
I have the original XDA upgraded to 2003 from one of the kitchens. I just recently noticed that my XDA is turning itself on very frequently, for no apparent reason (I'm sure there is a reason, perhaps some program I have installed, but no idea what). I have made sure that I have the option enabled to disable all the buttons except power when it's turned off (and confirmed that this is the case). Anyone know what would be causing this, or know of a 'screen saver' type program that will shut it off when it comes on like this?
Also, wondering if there is a weather program for the PPC that I could run from the start menu (using MS voice command) that would connect to the internet via GPRS and announce or display the current weather for a giving zip code.
The most common known reason for this is the outlook timed update ... check that the scheduling is set to "Manual"
Hi all,
I would find a way to enable bluetooth automatically when a call is being received: in that way, when in my car, I can avoid to keep BT enabled "all the time" just waiting for a possible call of few minutes..... thus saving battery ;-)
Is there any application suited for that?
I was thinking to a workaround but it seems pretty tricky and I still miss a thing.
We could use G-Profile and configure a profile, with BT enabled, which starts automatically on these conditions satisfied:
a.. during a call
b.. when a “specific program/process” is running
Item (b) is needed in order to let the profile be enabled only when actually in car and not when I’m at home or so
Of course, I have to start that “specific program/process” when entering car and shutting it down when exiting.
What I miss is a program to be used for that purpose. I would use a “fake” program which simply does nothing (!!), let’s say a simple toggle-program:
- Click on program icon: starts the program
- Click again on program icon: stop the program
Is there such a “useless” program ? Could some of you write it (if interested in that) ? I’m not so able to write it
Thanks in advance for your support.
I also use G-Profile. I have created a profile that kills the incalllock when mycarprofile is running. incalllock locks the virtual keys on my HD so that I can only take the call with the slide to answer. mycarprofile automatically answers the incoming call and turns on the speaker phone. I use G-Profile to kill incalllock whenever I turn on mycarprofile and runs incalllock again when i trun off mycarprofile.
What you have to do with G-Profile is to create a profile that monitors if a program is running and also add the condition "during a call" to switch to that profile and turns on bluetooth
brusko1972, G-Profile is not free.
Any free apps out there for this kind of function?
You can probably try this.
http://forum.xda-developers.com/showthread.php?t=386451
still not working
ai6908 said:
You can probably try this.
http://forum.xda-developers.com/showthread.php?t=386451
Click to expand...
Click to collapse
Dear ai6908, I appreciated your help: it really seems what I need but it's not working....
I have configured the CSDEVCTRL in order to:
- start when ringing or dialing a call
- turn on BT at call start
- turn off BT at call end
I have started the service.
When the call is being received the screen is locked by CSDEVCTRL but BT is not enabled at all.
Maybe I miss someting or it does not support windows mobile 6.5 (I have an HTC HD mini).
Any feedback are welcome !
You can try BTProfiler which I downloaded from xda developers a while back but unable find the thread now.
Not working on HTC hd2 wm 6.5
I downloaded this with high expectations that it would automatically turn my bluetooth off and on. I, too, am frustrated when I forget to turn bt off upon leaving my car. I set the program to run in the background, but the profiler does not work. I've tried all the conditions for turning bluetooth on or off automatically. Too bad, I was really hoping this would work. Any suggestions would be greatly appreciated.
I just have a bluetooth icon placed in the programs on the main page. I tap it and it's on when I am in the car. I tap it again and it's off.
Simple, quick and very efficient to use.
Hi all,
And... fisrt of all, happy new year !
In reply to this thread, I've downloaded BTtoggle (which enables and disables BT just by tapping on the screen) and I was just thinking this morning that someone could have maybe written a program (a mortscript ?) which could be quicker than running this program when needed.
I've tested to put BT off and run the progam (BTtoggle) when the phone is ringing then switch on the BT earphone and... call is missed !
I was thinking in a program that could "see" that a BT "thing" (ear, dongle...) (I don't know how to name it) is running, running BTtoggle (which switches ON BT) and when this "thing" is switched off, running BTtoggle once again (which switches OFF BT).
The problem is like brontolo999, I know which are the questions to ask but unable to write the program that could be able to do that !
Thks in advance.
Hallo,
I have a very strange problem. I'm developing an App that sends keep-alive packets to its server to ensure the connection is still alive.
The server is java based and thus easily to run. I run the server on a virtual machine (Windows 7). After my App is connected and the first keep-alive packet is received (it displays a message in its console output) I disable the network interface in Windows. This step is very important because by disabling it, there is no way to send any packet back to the client informing it about network changes.
The clients are configured to send every 25 seconds a keep-alive packet, so you don't need to wait long.
When you use the sample JavaClient on Windows 7 it takes less than a minute after the keep-Alive packet and an exception is thrown which triggers reconnection (which currently can't occur). This is the expected behaviour.
When you use the sample Android App on an emulator (tested Android version 2 and 4) it is the same behaviour. So in less than a minute after the keep-alive packet it recognises that the connection is dead, throws an exception, this triggers reconnection.
Problem is now when this App runs on a real device (tested several, Xpearia Arc S, one Cyanogen Mod 4 on Galaxy S3 and my Galaxy S3). I've waited 5 minutes, but there was no exception. This behaviour is reproducable.
So is there a bug in Android or am I doing something wrong?
Since this is a sample App, it uses no wakelock or service, so to test it is important to have it in foreground all the time (don't switch to other Apps or homescreen) and increase your display timeout to a few minutes to ensure that it doesn't go off. Use Logcat-Output to get informed whats happening, because there is no output in the App itself.
EDIT: Now Sample-Code is in the attachement. Something had gone wrong. The Code consists of 3 Eclipse projects which you can easily import.
Can noone help?
It was quite an effort to build this sample Code. Is there no one that can help?
I hope finally someone can help.
Hi.
This is a recent problem with my phone, the user interface in many apps freezes for up to several seconds in response to simple user actions like entering a text field (which brings up the keyboard) or switching between threads in Messaging app. This is not app specific, all the apps I usually use are affected. While frozen, the wireless (or mobile data) icon in notification center shows activity.
I decided to cut off all data to the tablet and it started to respond very quickly.
This is not a memory/cpu problem: The device is a galaxy not 10.1
I don't want to solve this problem by factory-resetting the device, I prefer to find the cure, it being a badly designed feedback feature or a spyware.
Any help?