Hallo,
what can I do to have the following behaviour:
I need to hear an arriving phone call on the mobile device even if I have connectet it to a Headphone (bluetooth or cable). (I often carry the activated bluetooth headphone in my bag but than I don't hear anny call because its only ringing in my headphone)
can anybody help me?
Several options. The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
The 2nd option is to disable A2DP on the phone. There are several apps out there that make this easier than going into Settings. I use a Today screen plug-in called A2DP Toggle, www.teksoftco.com, free. But the version I have is buggy.
The 3rd option is to disable BT on the phone, again there are tools out there that make this easier. A2DP Toggle can be set to also disable BT when you turn off A2DP.
I have never heard of a tool that lets you direct specific notifications to the various outputs but it makes perfect sense. There should be lots of options that we just aren't given in WM, like keeping the phone from turning off the backlight during a phone call.
The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
Click to expand...
Click to collapse
The problem on this way is, that it takes some time to turn the BT headphone on. So I sometimes lost a call, because I was to slowly...
My BT Headphone has a standby Time from more less 5 days! - so battery is no problem.
The way to disable A2DP brings that I can't use e.g. Voice Command over BT Headphone, isn't it?
So maybe there is no solution for my problem?
(The Athena cant "talk" quit... so I need the Headphone, when I get Calls - I don't like that everybody how is around me hear what the "caller" tells me...)
Over the weekend I had headphones plugged into my phone with music streaming (via TCPMP) and a call came in. It switched the audio over to the external speakers, then paused it, and played the ring tone over the external speakers.
Just what you wanted, right? I'm using the AP4 ROM, don't know if that is the difference or just using TCPMP.
Related
Hi All
I have been told by o2 that the following is a feature:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker.
Is this a feature or a fault?
Comments gratefully received
I'd say bit of both.
I've had my headset plugged in and heard the ringtone through both the headset AND the unit itself, but perhaps there's a way of making it so that the headset is the only audio (perhaps plugging the jack in whilst on silent then turning it back up?).
I've definitely had the headset ring out whilst the jack is connected.
A
Feature or fault, that's a hard one to call!
I would say it working as designed, since the headset will always override the speaker in any fashion. :wink:
I've never heard of this. All the US units ring in BOTH if the headset is plugged in. Unfortunately, message notification and alarms sound only in the headset though.
Hi,
As far as I have found out the behavior is not consistent. My device sometimes only ring in the headset and sometimes ring both. I have found out if you plug in the headset and connect via USB cable to the PC it will always ring both in headset and speaker. This is true even after you have unplugged the USB. Seems to me some flag I set during USB connation that enables this... ?!
For notifications - this only works via the headset... for me at least.
I find this annoying - the SmartPhone works as it should in regards to this.
I run 4.00.05 baked at this site... keep up the good work !
I had this similiar feature/bug experience too.
My XDA rings both on the headset and its speaker. One day, at some point, I managed to put it into a strange state. I started playing an mp3 with the windows media player (WMP) without the handset, it played thru its speaker (that's correct). And then I plug in the headset, mp3 came out from only the headset (that's correct too).
After that, I pressed "stop" the mp3 in the WMP, and then "play" again, mp3 came out thru both the headset and its speaker.
I don't seem to be able to reproduce this "feature" anymore now. Well, of course, that's after a reboot a while later.
In fact, now I've got a question then. Does that mean the on/off of the speaker can be controlled in software? AFAIK, like the iPAQ, it's controlled in the hardware, that means if you plug in a headphone, the speaker of the unit will be off.
Does that mean the on/off of the speaker can be controlled in software?
Click to expand...
Click to collapse
Yes, evidenced by the phone behaviour. Most devices use a simple contact in the headset connector to disengage the speaker, but obviously not the PE.
DP00PM said:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker. Is this a feature or a fault?
Click to expand...
Click to collapse
I would rather ask it to be a user defined option. I believe the current setup (both ringing) came after noticing that you can simply forget your headset plugged in so you may miss some calls.
But in some situations (ex: meetings) I would like to keep the headset plugged in and get the rining only through it.
Having had so much help from this forum and being a non programmer thought I would try to give something back.
Recently bought the Sony MEX BT5000 car stereo. The install was really easy. I bought a cable to convert from my existing pre installed car stereo to a standard iso fitting. It is then just a matter of plugging the cables in and replacing the stereo. Due to the integrated bluetooth no problems with having to tap into speaker cables to mute the radio for calls.
I also ran a standard red/white phono cable from the back of my stereo via the AUX IN connection to plug into my MP3 player. The stereo has built in A2DP if you wanted to stream via bluetooth on your phone.
Call quality appears to be very good in both directions, no complaints so far. The mic is built into the stereo with no option on an external one. This did slightly concern me before buying but all is well. I had done some research and some people had experienced problems. I think this is due to the position of your stereo. mine is high up in the centre console. If yours is at the bottom you may experience problems.
There is no "talk" button similar to a earpiece. On pressing the talk button you get various dialing options to use presets, phonebook or dial a number. If you want to use Voice Command you just press the button on the phone and then it transfers the call to the stereo when it starts dialing. To receive a call just press the button on the strereo or set it to autoanswer.
Tom Tom works with no problems. All instructions come out the phone though if a call is received it will mute Tom Tom. I like it working this way as I wouldn't want TT to keep interrupting the stereo. It could be possible to make it work through the speakers but I haven't tried.
Stereo sound is good but I am no audiophile. It is way better than the standard stereo that was in the car before.
In all I would recommend it. Easy install with no messy wires involved and easy to pull out and transfer to my next car when required. most importantly the call quality is good.
Only downside would be the lack of "headpeice" talk button but the workaround works well. (I did read on xda somewhere somebody had it work that when using voice command after pressing the phone button the notification messages went straight to the speakers and used the stereo mic. after installing a cab upgrade this stopped working. I may try re-installing VC to see if I can get this to work.)
To install to the stereo phonebook uses a bluetooth transfer. haven't worked out how to this yet as only IR transfer seems to be allowed from the phone. Obviously using VC this doesn't really matter.
I just installed the MEX BT5000 in my car, too. My experiences with the BT phone are roughly the same as yours -- the mic works really well, considering it's hidden behind the faceplate.
I've gotten the phonebook transfer to work. Just select the contact, then tap Menu/Beam Contact. It'll try IR first, then Bluetooth. I have the Sim Access Profile (SAP) hack installed -- that may be the factor here.
The one issue with phonebook transfer is that the phone numbers don't display properly on the Sony -- I just see +1 with no areacode/phone number. The numbers dial properly, however.
Q : Is it possible to hear (on speaker) ringtones when I use headphones...
From time to time I travel by car (driving) and I use navigation. Because I can't speak without headphones - I'm plugging it into Leo but not using all time in ears. Then I don't hear when somebody calls me.. How to set rings on speaker with pugged headphones ?
settings, menu, all settings, bluetooth, settings (all the gears), advanced, audio, tick the box, play system sounds on remote hands free device, job done
Yeee , OK. But I use standard headphones on wire plugged by mini-jack - not bluetooth
I have my SGS2 linked to a Pioneer DEH-P75BT car audio player.
The phone links to P75BT via bluetooth, and when I make or receive a call I hear the sound through my cars speakers.
If I use Navigation I don't hear any turn by turn navigation instructions, either through the phones external speaker, or the car speakers.
If I turn off bluetooth, then I start hearing the turn by turn instructions through the phones external speaker, which is what I want. How do I make the Navigation software audible through the phones speaker whilst the phone is still connected via bluetooth to the P75BT?
I'm actually thinking of getting a replacement audio system for the car, because the P75BT only lets me re-connect the phone if it's discoverable. I shouldn't need to keep doing that once they've paired.
Also I thought maybe a newer bluetooth car audio system might not suffer from the first problem I described.
I am sure this may be an issue for some people. my car stereo has bluetooth that links with my phone and mutes the car stereo and turns on speaker phone when a call comes in. i like the fact that it mutes the stereo since i usually have it very loud, but my problem is i cant set it to default to the phone earpiece and not the speakerphone, even when i answer a call and press the button to keep it on the ear piece, it switches right back to the stereo a second later, i press it again and it stays on the phone. i have had this issue with all my other phones as well and it drives me nuts. is there anyone who can come up with a fix for this?
i appreciate any input anyone may have on this.....
thanks
It is not a problem with the phone, it is to do with bluetooth profiles as they are designed to communicate with TWO devices not THREE. I also use car stereo for playing my music. I do not get that many calls while driving so I never use my bt headphones.
Moved to proper forum.
sorry about posting in the wrong forum. I am only trying to get it to default to the handset when i pick up a call. i do not use it to play music, so i have no need for that to even be an option, i just want to be able to pick up a call on my phone, and have it stay on my phone while it uses the bt link to mute and un mute the stereo. i find the speakerphones in car stereos to be totally worthless for talking, but i find the mute feature very useful.