http://www.nuerom.com/BlogEngine/post/2009/03/22/nueTVOut.aspx
the TV out w/camcorder cable wasn't originally mine - I just wrote this app to make your life simpler. Enjoy =p.
Should work with RAPH100/RAPH500/RAPH800 (Touch PRO CDMA or GSM/Fuze) as far as I know, untested on other devices.
hope one day it works for Tytn2...-_-
It won't, Touch Pro has a TV-Out, unlike TyTN II or Diamond, or many other .
[email protected]_ said:
It won't, Touch Pro has a TV-Out, unlike TyTN II or Diamond, or many other .
Click to expand...
Click to collapse
well, diamond has same chip and hence video output capability as touch pro; its just arguable whether the hardware is actually connected..
no2chem said:
well, diamond has same chip and hence video output capability as touch pro; its just arguable whether the hardware is actually connected..
Click to expand...
Click to collapse
Has someone tested it with Blackstone or Diamond yet?
Regards
Somebody know if can work at HTC Jade (T3232)?
Thanks
diamond? works?
will this work on htc P3400 i
aa
[does the vogue have tv out] the answer is no it does not
diamond
someone have tested it on diamond?
Related
Hi, is there any opportunity to install windows mobile 6.0 standard edition (for smartphones) on my HTC TyTN? Lots of thanks in advance =)
for smartphones? why?
why would you want to do this firstly?
never heard about it being don
doubt it's possible as the os needs to
have 100% the right drivers to boot
and even then the screen would no longer
react to touch
ss1271 said:
for smartphones? why?
Click to expand...
Click to collapse
Interface of WM6 standard edition is adopted for keyboard manipulations without touchscreen. I am using mostly keyboard but i can not get all the functionality. I think using keyboard is faster than touchscreen.
You say "mostly"... if you could install WM6 Standard on the TyTN it would be "always"! Forget about doodling in Notes and quick copy'n'paste in Pocket Word!
AFAIK, WM6 Standard is adapted to use a standard phone number pad and this is missing on the Hermes. Why don't you sell your TyTN and buy the S720 or S730? There you have both an outside number pad and a sliding QWERTY keyboard.
Look at this: http://www.htc.com/europe/default.aspx
There's any chance to put it on Prophet?
alinchioveanu said:
Look at this: http://www.htc.com/europe/default.aspx
There's any chance to put it on Prophet?
Click to expand...
Click to collapse
Touch Flo 3D is for VGA devices! It may be possible to hack together a non VGA (QVGA) version, but it will take some time...
Never on Prophet and never on non hardware accelerated devices.
Now it only work on Diamond but can maybe work on Cruise and Kaiser if HTC release drivers one day.
xvx45 said:
Never on Prophet and never on non hardware accelerated devices.
Now it only work on Diamond but can maybe work on Cruise and Kaiser if HTC release drivers one day.
Click to expand...
Click to collapse
But look at the PointUI interface. I think is builded in the same way and it's working very good on prophet.
PointUI is not in 3d, therefore it's much lighter on the system.
xvx45 said:
Never on Prophet and never on non hardware accelerated devices.
Click to expand...
Click to collapse
So sad!!
It's very nice!!
Has anyone tried the redfly on the HD?
I am thinking of getting a Redfly but hope to be upgrading my TytnII to HD in Jan.
If the Redfly doesn't work with HD I might wait.
Thanks.
Ian
Hi Ian,
HD works fine with Redfly although Touch Flo 3D will not display properly. You would need to switch it off back to standard WM6 home screen. The video function doesnt work either btw.
Thanks for the quick reply.
I just read that the new drivers are locking out "non approved" windows mobiles like Tytn II??
I may have posted this in the wrong forum originally
Mal
Celio RedFly & Touch HD
Can someone make a ROM from Topaz please.. The HTC customized WM6.1 ROM is faar better than WM6.5. Touch HD, Diamond and many other devices have got it ported but not on Athena yet.
Micky and other great cookers, can you still show some love on Athena please..
Regards,
Carty..
Carty said:
Can someone make a ROM from Topaz please.. The HTC customized WM6.1 ROM is faar better than WM6.5. Touch HD, Diamond and many other devices have got it ported but not on Athena yet.
Micky and other great cookers, can you still show some love on Athena please..
Regards,
Carty..
Click to expand...
Click to collapse
Yes very true, I am eager as well to try the flavor of the new topaz rom. When AP team posted that they are planning to release a new rom; I was expecting to have it but it seems that their project is postponed for a reason or another!
http://forum.xda-developers.com/showthread.php?t=442179
touch hd, diamond, raphael etc has 3d hardware accelerator compatible with manila3d etc, athena hasn't. because our device need a specific driver. But i don't think that someone will make it ever.
I thought Athena has one too. But you know what, I compared video playback on Touch HD and Athena side-by-side, was better in Athena!
I used TCPMP and a .avi music video encoded at standard rates. Same file played side by side on both devices. Touch HD had a very little hic-up while playing.
Anyway, I can find Qtv display setting in Coreplayer and it plays well only after enabling it. Im talking about the Athena here. So you sure there is no ATI chipset in?
Regards,
Carty..
Carty said:
I thought Athena has one too. But you know what, I compared video playback on Touch HD and Athena side-by-side, was better in Athena!
I used TCPMP and a .avi music video encoded at standard rates. Same file played side by side on both devices. Touch HD had a very little hic-up while playing.
Anyway, I can find Qtv display setting in Coreplayer and it plays well only after enabling it. Im talking about the Athena here. So you sure there is no ATI chipset in?
Regards,
Carty..
Click to expand...
Click to collapse
i'm not saying that athena hasn't one. i'm saying that athena HASN'T ONE COMPATBLE WITH THE TOPAZ ONE, so incompatible to manila 3d etc.
Is there any qwerty keyboard that can be atached to the td2 like its on the touch pro 2 ?
because that would be realy cool
thanks
5kordez5 said:
Is there any qwerty keyboard that can be atached to the td2 like its on the touch pro 2 ?
because that would be realy cool
thanks
Click to expand...
Click to collapse
You can use a foldable bluetooth keyboard. Google it.
There are cloth ones, foldable ones, even little laser keyboards that are super tiny. I've paired mine with a friends Microsoft 6000 and it worked great. Searching google or yahoo yields quite a bit.
yeah these are great.. but what about keyboard that is in HTC touch pro 2 ... I would love to have a keyboard small like that ..it would be great if it could be atached on the back of topaz and it would be like rhodium
so any ideas?
How about buying a Rhodium?
Check this one:
http://www.wirelessground.com/blke.html
Buy a Touch Pro 2 instead?
i have ordered this one
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=310190505642
i expect receved it quick
arrow224 said:
Buy a Touch Pro 2 instead?
Click to expand...
Click to collapse
doesn't look as cheap as buying a 10$ BT-keyboard -_-'
i just get the bluetooth keyboard i have ordered 2 week ago and he he great ; i can use it to play with all the games who need lot of keys
but i have a litte problem on my diamond 2 (and not on my p3600 xd) when i type m i get a , on the screen
The Best BT external Keyboard made was the Think Outside/IGO Bluetooth keyboard
I've had mine for years and it was gathering dust until I got my TD2 and it paired STRAIGHT away to my TD2 without any drivers or any tweaking...
The only problem is that the manufacturer Igo has stopped making them now but you can still pick on up on ebay or some places
Microsoft 6000 How-to?
illusion said:
There are cloth ones, foldable ones, even little laser keyboards that are super tiny. I've paired mine with a friends Microsoft 6000 and it worked great. Searching google or yahoo yields quite a bit.
Click to expand...
Click to collapse
I cannot get either my Logitech Dinovo Edge or my Microsoft 6000 to pair with my TD2. I thought it might be a ROM issue so I tried about ten different ROMs including the shipped Telstra ROM (my phone is from Telstra), a shipped T-Mobile ROM and a bunch of cooked ROMs (thanks chefs) and none of them worked. It would recognise the KB and show it in the list of devices but always as "disconnected".
So, I am keen to hear how you made the MS 6000 work with the TD2.
(BTW I have had no trouble pairing my Dinovo with a Nokia E51 and my MS6000 with an Apple TV in addition to their usual PCs so I do not think the keyboards are the problem).
Update: I have just installed Dutty's latest Holy Grail ROM [Duttys Topaz Sense 2.5 Holy Grail R9 |WWE|
Based Rom 2.53 ( CE OS Build 5.2.21891 & 5.23534 )] and I can now connect my DiNovo Edge keyboard. Thanks Dutty.