Hello.
I want to change another version rom on HTC Hermes but when start loading new rom the "ERROR [262]: UPDATE ERROR
The rom update utility has encountered communication errors during the update process ... RECOVERY ...."
Phone is correctly connected to USB and entered on bootloader.
ex. Old rom is Schap's and i want to change to RDZ-ROM-STORM (for example) but not works!
When load similar version (Schap's) works!
What could be the problem?
Sorry 4 my eng.
Related
Hello !
I was trying to upgrade my XDA2 from the english language to german,
but my PC hung up
Now when i try to run "xda_16052ger_o2.exe" it says "ERROR 100: MODEL ID ERROR".
"The ROM image that you are trying to use is not designed to work ,,, "
With different ROM´s it says "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
I have also tried this files "http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm".
Then i have read lots of your postings like "http://forum.xda-developers.com/viewtopic.php?t=8606", but this is not working
Right now my XDA2 shows "Serial v1.06" and nothing is working
Is there any trick ? What can i do ?
Thank for any help !
Regards George
install t-mobile beta version 1.72 (it´s in english).... after that you can install almost all ROM´s or even all
Hi,
i have a very big problem with my XDA (HTC Prophet).
I already had a WM6.1 Rom on my device but wanted to change to a different rom.
Now my Device is showing me the RGB screen after upgrading. The UpdateUtility works fine and i get "update successful" after the updating.
Now i can just install the original rom from O2 (WM 5).
Does anybody know a solution for my Problem?
Thanks and Greetings
MrDCA
Can you get the device to start up after installing the WM5 ROM?
What you will need to do is follow this to recover it: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
And then HardSPL before flashing a new WM6.1 ROM.
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
mrdca said:
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
Click to expand...
Click to collapse
Would you like to try my tool? (@ my signature~~, hope it works for your situation... )
You're using prophet tools? I think there is a slight issue with that, but I've fixed it and shall upload it now...
I tried both utilities.
none of them works for me.
Let me know if you uploaded the fixed version and i will test it!
Thank you guys!
The fixed version is now uploaded in the Prophet Tools thread. If that fails, you can use the HardSPL utilities from the New WM6 Upgrade guide.
hello everyone,
i had a problem while i was installing a cocked ROM
i installed a cocked Rom LILLY ROM v1.2.4 and i wanted to get back the original Rom again.
so i Run sspl-1.16-nike.exe from my phone and i started to install the official Nike ASIA WWE 2.12.707.2 Radio R 1.65.29.22
during the instalation on 14% i received an error:
Error 264 connection and till now i can't get my original ROM and can't use my phone i still see the 3 colours screen with the message: Upgrade ROM code error please try again.
i tried alot of times to do recovery by the same software but all are failed
please help me!!!
how i can get my original ROM again
my htc touch dual is really brand new (one week)
Hello,
I have a big problem. I flashed my HTC Touch Dual (Swisscom XPA Touch Dual with Italian language) with SSPL first. Then I forgot to flash the device with uSPL or HardSPL and a new ROM (official HTC wm6.1 German) was failed in the middle. Now I have the "upgrade rom code error". Flashing the HardSPL or uSPL is imposible now, bcause of the "ERROR [262] : UPDATE ERROR". I can't find the original ROM (swisscom italian) for the device, all other official ROMs brake with the error " ERROR [294]: INVALID VENDOR ID" (because there is no HardSPL / uSPL, right?). I have USB connection in bootloader mode (can go there only, the operator system is lost) but in the device manager there is MICROSOFT USB SYNC and not HTC USB SYNC (can't identificate the device, only as a "Qualcomm..." in "devices and printer (WIN 7 x64). I have done all the steps for "drivers for WIN 7" and tried it on a (virtual) WIN XP with the same results. Is there a way to save the system with mtty (it's too difficult for me) or other processes?
Thank you in advance (and sorry for my english) !!!
P.S.: I looked at google and other threads in this forum, but without results
NIKI100
SPL-1.22.0000
CPLD-1
-Please use the 'Search' function first, and check the manuals already made available for the Niki.
-First read the manuals completely and follow the steps meticulously..!
-Before posting your questions, remember that everything you need to know, to flash your device, is probably already made available for you on the board.
-Take your time to find out what you need to know before you flash your device, or you 'will' brick it..!
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
I have same problem plz help....
[email protected] said:
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
Click to expand...
Click to collapse
I have same problem with my niki plzz help me
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now
hi guys,
trying to upgrade the radio rom, im using the customRUU and its getting to about 99% and then its getting the error 290: invalid command.
and now it only boots in the red, green, blue and white bootload screen.
heres some info if it helps:
SPL-1.42.HSPL on my hd2..
windows 7 home premium, (i tried running as admin, no difference.. also tried several other usb ports)
help would be appreciated!
thanks guys!
have you tried a good ol MTTY or Task29 before flashing?
does the phone boot to RGD screen?
what Radio you using?
And you have the phone HSPL unlocked?
dodgy download perhaps? tried another radio?
did anyone find the solution to this problem??
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
What exact ROM versions have you tried, and what SPL or HSPL do you have showing in bootloader? Also is there a radio currently on your HD2 and what is that radio if so?
normally phone hd2 leo and italy not t mobile ant spl 208 hardspl maked bootmode okay ( also write boot with jtag ) radio ver 2.15.50.14
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
I had the same problem. I was trying to restore my phone to original firmware, due to issues with custom firmwares. I had managed to extract the NBH from the installer provided by my carrier, and used CustomRUU to flash the phone, but the phone was not booting.
I then flashed one of the EnergyROM builds onto my phone.
After that I could not get the original firmware onto the phone, error 290 at 9%.
I booted my phone into the bootloader (red/blue/green), and used HSPL2 to set SPL to 1.42.HSPL. I could then flash the original firmware.
My phone is now working fine, as best I can tell.
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now