Just to let you know that I bought the Brando Screen Protector for the Diamond2 from Inkino. They even installed it for me which is a bonus. The screen protect is absolutely amazing and is a good as any that I have seen. Do not scrimp on cheap nasty ones that come in multiples in a pack. You only ever need one good one. The Ikino guy showed me a Treo 650 which had a Brando Screen protecter that he had installed when the Treo 650 came out (was I born then ) and it was in a very impressive state. If you are going to install it yourself then they do recommend doing it very slowly and cleaning the screen before-hand is crucial. Common sense I know, but you would be surprised how easy it is to get dust under the protector.
got mines today. 2 pcs, both from Brando. one is the Ultra Clear version.
i've applied the "normal" one for now and i must say it's really cool!
putting it on went pretty much smooth. in the bathroom, where i guess there's less dust, i've cleaned first the screen with a special lotion. then waited until it dried up, after that applied the Brando screen protector as shown in the "instructions".
went OK, only had to start again 2-3 times, then found the right position. went over it with a credit-card while smoothing it out on the D2's screen. it sits very good, no air bubbles and really just a few very small dust pieces at the border of the protector - does not disturb.
so, yes, the Brando screen protectors are really the thing!
now i want only the textured back plate and then i'm really happy!
PS: didn't find the screen-protectors on the romanian market, so had to order them from speedshop.hu (hungary), but eveything went very smooth! in 2 days after the payment
Could you post pictures for me? I'm looking for a screen protector too. Does it cover the whole black part, or just the 3.2 inch screen part?
it covers the display + the black border around. it's actually identical in size with the one delivered in the stock package, the difference in the aspect being the "U" shape around the front camera (the original one is a circle).
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
well0549 said:
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
Click to expand...
Click to collapse
yeah, i know. the problem is that i didn't pay enough attention when putting on the screen protector that came in the box and i messed it up (got dust and airbubbles under the protector), so after i've tried to get it clean, i messed it up so bad that it got useless.
this is why i ordered 2 brando's (speedshop.hu has 2 versions) - put on one that is not the "ultra clear" version and now i am happy with it.
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Laban said:
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Click to expand...
Click to collapse
Use CD/DVD cleaner
I use those: 3M Vikuiti DQC160
http://www.3m-displayschutz.de/dqc160
Scratchproof, crystal clear and very easy to get on and off.
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
loadstone007 said:
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
Click to expand...
Click to collapse
You should put one, if it is not too late: once your screen is scratched (and it will get scratched, very fast if u use the stylus), you will have to buy a new screen cover (I think it include the digitizer), which will be much more expensive, or live with scratches which will blemish your screen, which are especially bad with TD2: the very high pixel density will cause moiré pattern (rainbow effect) around the scratch and I find that very annoying...
It is not so hard to install, mine was my first attempt at installing a screen protection, and it went flawlessly: just be careful, do not hurry, do not put your fingers on the screen (once cleaned) nor on the sticky face of the protector, and work in a clean, dust free, well lit room. Dust free is hard, but an excellent trick i did found here was to use your bathroom, after a hot shower (keep the water runnnig a long time, and take a shower yourself ) It will ensure YOU are dustfree ;-), but also, more important, water condensation will remove almost all particles in suspension, and you will get very clean air. BTW, better to wear minimal clothes after your shower: clothe fibers is the most common dust/particles....
If you work in such a place, the only difficult thing is to get the screen protector perfectly aligned. I started on the top, got the grid and camera holes aligned, tried to cover the screen from top to bottom, and restarted as soon as I saw the slightest misalignment without letting the screen protector out of my hand (else it is very difficult to repick - that was the only trouble I had after I was too enthusiatic and let it go while there was still a small misalignment.
If you keep calm, and have good hand coordination, 2 or 3 attempts and you will have an invisible screen protector ;-) Oh yes, and start with a clean screen (I cleaned mine with distilled water and a soft microfiber glass cleaning tissue...worked very well....)
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
loadstone007 said:
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
Click to expand...
Click to collapse
slightly, yes....on the other hand, it is more slippy, although not enough for my taste when using fingers, but it is an improvement compared to the bare screen. Before I installed the screen protector, it was much too grippy for confortable finger sweep motions imho (clean screen, after a while finger grease act as a lubricant ;-) ).
All in all, weighting the slight decrease in sensitivity against the friction reduction...I prefer my screen with the screen protection, even taking out the protection factor
There's this Zagg product for the TD2, which is invisible. Not really sure about this... I might just get the regular screen protector, and use a silicone case.
I would recommend placing the bottom edge of the screen protector up against the bottom buttons to align it. I managed to get it perfect first time.
I find the supplied screen protector picks up finger prints even worse than the bare screen. Are the after market ones any better?
My reseller did the protective screen installation for me. Did a good job. Did you guys get the free pouch also? I am not sure if the pouch came with the unit or if it was a free gift as a promotion.
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
Those look the same as the orignal, that came with the device.
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
May be they have some particular features such as "antiscratch" or "washable screeing protector"!
I have also recently bought original one SP P240 and very glad with it!
And never mind, original parts are not worse than other brands!
Related
Anyone managed to leave a screen protector on for more than 24hrs without cracking and peeling it off? Every now and again I buy one and try again but it never lasts - just doesnt feel right. Thus might be an irrelevant post but I've just done it again for the 4th time and I'm begining to feel ocd about the whole thing and I'm looking for re-assurance
We "need" screen protectors so that the companies that make them can make more money.
I've never seen a screen protector do anything useful. In fact, I've seen just as many phones with broken screens with screen protectors as without.
<---Used to be a cell phone sales monkey
Only difference I noticed so far is that it does not get dirty so fast and the protector is easier to clean than display itself. So it is good for lazy people
uh, screen protectors prevent scratches to the screen...they're not made to protect against cracks due to dropping the device or some such thing.
I've used a screen protector on a device for over a year before with no problems. I can't imagine how a screen protector could possibly crack though, unless it was just total crap material.
OMG I carried my TyTN around in the nasty carry case for 2 weeks before i bought a screen protector. Aslong as you buy a good one you will NEVER notice it and prevent MANY unsightly scratches being on your screen.
@cdyat which screen protector did you try?!?
They Suck
I used a screen saver on my Wizard and hermes, After updating my Hermes 8525 to Black 2.0 I could not figure out why I had to tap so damn hard on the lower left hand side of the screen, sometimes it would just make my calendar go nuts, I thought it was the Rom update, I turned the Pocket PC off and took off the screen saver and now it runs sooo sweet
mrvanx said:
OMG I carried my TyTN around in the nasty carry case for 2 weeks before i bought a screen protector. Aslong as you buy a good one you will NEVER notice it and prevent MANY unsightly scratches being on your screen.
@cdyat which screen protector did you try?!?
Click to expand...
Click to collapse
Keep replacing it with the standard tytn one - better suggestions are welcome
Fourgig said:
uh, screen protectors prevent scratches to the screen...they're not made to protect against cracks due to dropping the device or some such thing.
I've used a screen protector on a device for over a year before with no problems. I can't imagine how a screen protector could possibly crack though, unless it was just total crap material.
Click to expand...
Click to collapse
Its not the screen protector that cracks. Its me!! I see bubbles, the screen feels unresponsive and I worry about if the adhesive will come off ok. Guess I need a firmer grip on reality
SP (Screen Protector) quality differs. I have had a Palm before which I bought some cheap sales SP for £2 for 10 pieces, that never last, in fact, the SP itself got scratches all over. Then later, I bought one at eBay, which said to be good, relatively cheap, £5 for 2, that is not good either. THEN, after I read one of the thread here, upon the members recommendation, I bought one from Brando, for £7, that WORKS. Not only it is easy to apply (it feels like a card, which makes it easy to get rid of bubbles), it so clear that it is as good as the screen without a SP. However, I do find that the SP is much reflective than the screen.
Anyway, SP is there so that IF things happens, your screen get protected (from scratch). No, SP don't protect your screen from being smashed. Anyway, you may not know it, but from my experience, I do find some hard residue (while writing with my stylus) on my screen if I don't clean the screen as often. I suspect those may came from the fact that I use my finger to operate the phone most of the time, and also probably, dust/particles get stick to your face (which got transferred to the screen when you answer the phone) in the windy UK.
I would recommend others to get a SP, that is like £7 protection against a £50 (?) price drop on your sale price if your screen get scratched (thats one of my main concern when buying one). Do a search on this forum, the thread on SP recommendation has also recommend another brand too, which I can't remember.
As those who have experienced bad SP, do tell us the brand of the SP that you've bought. So as others can avoid.
I use the martin fields screen protector, sooo worth it. The screen is no less readable and the styles is just as responsive as it was before the SP.
www.overlayplus.com
Pocket PC Techs make great protectors. They cost a lot but last months...plus they can be rinsed and re applied.
I'm using a screen protector on my 8525. I haven't cracked yet despite a couple of small bubbles.. But.. They're worth their weight in gold. Having scratched the displays on my 8125 and my hx4705 prior to getting screen protectors on them, I made sure when I got hte 8525 one right away.
I use the Boxwave Antiglare.. Love it.. Love the feel of it too, by comparison to the regular screen.. No issues with tapping or anything either..
I'm using the one that came with my 8525. I can tell you that my last phone/pda has scratches all over the screen from hours of playing solitair. There is also a small scratched spot in the upper right corner of the screen from tapping to close programs over the course of 2 years. I think I'll be keeping a protector on this one.
Total waste of money...
I have carried a PDA with me every day since the first USR Palm Pilot, and had a mobile phone since they were the size and weight of a brick, and I have never ever managed to scratch the screen on either.
My wife managed to smash the plastic screen cover on her Nokia once, but a "screen protector" wouldn't have helped that. Keep it in a case when not in use I say.
I tried a "screen protector" once, (someone gave me as a gift). Horrible. Why not just use a comdom on your stylis?
Zilch said:
...
I tried a "screen protector" once, (someone gave me as a gift). Horrible. Why not just use a comdom on your stylis?
Click to expand...
Click to collapse
Thanks for sharing your secret Need some for my fingers too.
I like the ones from shieldzone, been using them on my last few devices.
I'm a screen protector believer, BUT they really vary. I prefer the glossy style vs the non-glare/matt finish types as the matt versions seem to make the display harder to see in bright conditions and are harder to clean.
For the Hermes, I like the Boxwave "Crystal" version. It was like $12 for one or 20ish for 3. It's virtually invisible, no bubbles, and the glossy surface is very easy to clean
I am using Boxwave Antiglare. The display is readable and I have noticed improvement in readability in direct sunlight (although it sucks anyway). Also I like the feeling of the screen protector better when working with stylus (somebody told it resembles paper which I do not agree but it definitely is something different than plain display). Also it does not show fingerprints. And well, as with everything else you get what you pay for.
www.boxwave.com, i've had mine on since the second i opened it, and its crystal clear. I used to have an old sony ericson p800, and after using it for a few years i noticed that near the bottom where i write it got very scratched up. Plus sometimes i put my phon ein my pocket with my keys, the last thing i want is to have a huge scratch on my screen.
exstatica said:
www.boxwave.com, i've had mine on since the second i opened it, and its crystal clear. I used to have an old sony ericson p800, and after using it for a few years i noticed that near the bottom where i write it got very scratched up. Plus sometimes i put my phon ein my pocket with my keys, the last thing i want is to have a huge scratch on my screen.
Click to expand...
Click to collapse
I second the boxwave screen protectors, although I prefer the anti-glare one to the crystal clear one. It makes the TyTN screen 100x easier to read under florescent lighting. It's also very 'slick' so the stylus glides just as easily as on the real screen.
As long as you follow the instructions and put it on carefully, you won't have any bubbles or distortion. You can't even tell it's there.
InvisibleShield/ShieldZone makes a super strong screen protector, but I didn't like it too much because it was sort of 'sticky' on the stylus. It made it weird to write things on the screen (which I rarely do).
A screen protector is pretty important; your screen isn't made out of glass on the top layer -- that's just a thin layer of rather fragile plastic. If you gouge it on accident, your screen is toast, and that's a $250 USD repair.
Does it comes with screen protector in the box? Like Touch Pro..
Asking because I ordered one, until it comes from Hong Kong...
to have something on screen...
thx
yes there is, as is a soft protection bag.
there is but...
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
imee.h said:
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
Click to expand...
Click to collapse
I think the screen protector is not too bad, it is hard plastic not that rubbery stuff. It is certainly nothing like those cheap ones that you find in local shops and it covers the whole face of the phone, not just the screen. The cloth bag cover that comes with it is OK, but it is a bit thick. I found a black silicon cover that is made for the iPhone 3G, I made the hole bigger for the earphone plug and a new hole in the back for the camera. I saw this video of it on YouTube (not my video http://www.youtube.com/watch?v=xUOgFQ8dpzo . It isn't a perfect fit but it's pretty good until the official covers are available.
The hard plastic covers made for the iPhone won't fit the HD
My story: i snobbed the screen protector since i never used any in the last 10 years, and peeled it badly since i thought i would have never used it...but looking better to it, it was not too bad! then, I ordered two original replacement protectors from HTC, installed it VERY carefully....and now they are essentially invisible and you'd need time to realize that the screen protector is actually present....
So, refrain from excitement when you open the box!
I thought I'd read to steer clear of the protector in the box? You guys are saying to go ahead and put it on?
Screen protector
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
razor_amd said:
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
Click to expand...
Click to collapse
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Noony said:
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Click to expand...
Click to collapse
Well, i disagree.
I seem to be able to get the phone in it with minimun effort, seems that it expands after a little use, like new shoes or clothes...
my gf put on the screen protector that came with the phone.. and i guess shes good at it haha cuz we put it on with no bubbles.. no edges up.. no nothing. PERFECT. it looks great. dont even notice it. ive been using the pouch that came with it and i like it. works fine.. squeeze from the bottom to take it out and just hold it slightly firm on the sides to put it in.. pushing down from the 3.5mm jack so you dont accidentally turn on the screen again with the power button.. gets slightly easier after a bit .. dont be scared =P
Is the screen protector in the box the same as the ones sold on htcaccessorystore.com (and other places like expansys) :
HTC Touch HD Screen Protector SP P200 (2 Pieces) ??
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=173045
I managed to put on the original screen protector with little hassle but hate the quality. Hope martins ship their fast.
is there a need for screen protector at all. I mean can I damage thescreen with stylus or my fingers?
YES! and a good quality piece!
I had accidentally hit my kaiser screen with seat belt metal piece, thinking screen is damaged. Therefore, not willing to remove the film to face the reality. Only yesterday, after confirming my blackstone is configured and running well, I removed my Kaiser screen protector. The screen is good as new. The dent on the film is "high"! Thanks to the martin shield.
I know but I mean with stylus or fingers not other things?
Surfer_D said:
I know but I mean with stylus or fingers not other things?
Click to expand...
Click to collapse
Yes I'd also like to know if a screen protector is necessary, assuming yyou don't abuse it.
Also would a cheap one from ebay be any good, and if not why not?
tyronne1126 said:
no edges up..
Click to expand...
Click to collapse
Now how the hell you did that ? :< I re-applied it 150 times and i need to be like super precise on it not to go left or right even for 0.0001mm
hell yeah screen protectors are necessary!
the screen will mark over time with stylus use and of course anything that "accidentally" hits it that is hard will cause marks, and no matter how careful you are, accidents happen
ive got the packaged screen protector on and its not too bad but i have a martin fields one ready to go on instead once the htc one starts to wear
I tried multiple times to apply the protector and was always off by a hair by the time got to the bottom. When I finally got it on straight there was enough dust on under it that I got disgusted and peeled it off again. I didn't give up though and ordered the OEM screen protectors again (two to a pack) and this is how I finally installed it properly:
1. Wash your hands.
2. Wipe the phone screen clean of any dust and fingerprints.
2. Find as dust free an environment that you have.
3. Peel the top edge of the protector only then line up this up with the top of the phone.
4. Slowly apply to the protector to the phone while allowing the backing to peel off. Make sure you don't allow it to totally come off.
5. You will soon know if it's going to lay flat in the slightly recessed area of the phone screen. The protector is exactly the same size as the recessed area and there is no room for error.
6. If not, peel the protector off again while allowing the backing to reseat on the protector but not all the way to the top.
7. Reposition the top edge very slightly and repeat. It will probably take several tries to get it right. It took me about 6 times but it looks very good when done.
The replacement protectors are easier to apply because the backing is the same size as the protector so it's easier to align with the phone.
If you're careful to not touch the adhesive side of the protector and are lucky enough not to have any dust settle on it, the final result is indistinguishable from the unprotected phone surface.
I'm very curious. Does anybody know why HTC doesn't supply the machine with the screen protector already installed?
Has anybody every used this brand of screen protector's before? They just sent me an email saying that they have in stock screen protectors specific for the T-mobile TP2 and I am debating whether or not to buy them.
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I originally had a Martin Fields on my Touch Cruise that I loved, but they don't make the screen protectors for the T-mobile TP2
I used one on my MDA (prior to getting the TP2). I loved it (make sure to get the crystal clear, not the non-glare, if they have a choice). 3 years and looks like new, nice slick surface for using the stylus, extremely durable. But I don't have experience with any others (except the one that came in the TP2 box which I also like a lot).
Thanks for sharing!
I´ll go for one of those
The crystal clear is one of the best I've used before!
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
is the anti glare version kinda gritty to the touch ive never used one?
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
Speaking of anti-glare... im using one on my Iphone 3G..got it back from Manila,Philippines on my last holiday, some chinese brand screen that i thought will be just a piece of crap screen protector.
to my surprise it was 98% perfectly fit on my iphone...and it was a great anti-glare screen protector. my wife likes it now she wants 1 for the htc touch pro2. ive seen some on ebay i might order it this week.
for those who's using one... where did you guys buys the anti-glare screen protector?? -thanks
Arcarsenal said:
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
Click to expand...
Click to collapse
Nice one thanks
I've raved about it before many times, just search my posts on here and PPC geeks, but the BoxWave AntiGlare is the best screen protector for any device hands down period end of story etc!
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
I wouldn't say gritty, but its definitely neither frictionless or sticky and doesn't impede your fingers or stylus movement in anyway... its got a matted texture, and I really like using my stylus with that texture! more of a paper feel, offering just the right amount of feedback and friction.
You do lose a tiny bit of clarity compare to the Crystal version, but for the anti-glare, anti-finger print benefit, I love it!
finger prints and face oil on the stock screen protector have been driving me nuts!
I'm supposed to get it today but heading out of town for a wedding this weekend so may not have a chance to report or upload pix until monday
Thanks for the report, i can imagine a paper texture! i think i may order one. cheers
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
venomshot629 said:
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
Click to expand...
Click to collapse
Personally, the 3M crowd is better because then you don't have to worry about the screen protector getting scratched.
I had purchased a Boxwave Anti-Glare before and it worked decently, but the amount of glare it reduced was negated by the amount of brightness that needed to be increased.
Boxwave, in my opinion, works if you have a case protecting it. But trying doing this with a Boxwave.
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
NOT gritty.
I have used Boxwave screen protectors for years and have NEVER been disappointed. Excellent longlasting product that your stylus simply glides across; I have settled on the Anti-Glare. One post says that Boxwave isn't TOTALLY scratch-free like some other 'full-body' clear protectors. Correct. However, personally I do not like the idea of spraying a liquid all over my device in the application process. 'Full-body' protectors are applied just like installing tinting on you car's windows.
Suggested application procedure.
Before beginning I have two clean microfiber cloths; one is included. Clean your phone's screen well; preferably w/one of those microfiber cloths. Close windows in bathroom, run shower on hot a bit & turn off. Moisture will pull all the dust outta the air and drag it to the floor. Vent heat (u don't want it to be uncomfortable in there).
Now that all the floating dust is negated, clean your screen again w/the the other microfiber cloth and apply protector. It is helpul to have some tape applied to a corner or two of the protector. Utilizing the tape, lift and reapply as needed using the supplied squeegee or a credit card to clear out bubbles; you may need to lift protector and use the microfiber cloth to pick up some lint/debris to ensure a clean install.
You should have a lint- and bubble-free application if you were careful.
Good luck from Lincoln!
I just got the new Boxwave ClearTouch Crystal screen protector for my T-Mobile TP2: http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I had previously had a Boxwave on my MDA. That has lasted 3 years with no signs of wear, and I was extremely pleased with the fit and feel, so was hoping to do the same for my TP2. I researched all of the competition and read many forum posts on the subject. My main criteria were:
1) quality
2) exact fit
3) feel with finger and stylus
4) longevity
Price was less of a concern as I am hoping I will only ever need just the one for my TP2 (if my previous experience with the MDA is anything to go by), and so the lower priced ones, or the ones that came with 2 or 3 in the pack, were not a strong selling point for me.
The other main one I narrowed it down to was the Bodyguardz, and I probably would have got that if the Boxwave hadn't been coming out soon.
Boxwave advertised pre-orders were available for October 9th shipping. I searched high and low but couldn't google a single coupon code, so ended up paying full price of $12.95 + $2.50 shipping. They shipped a day or so late, and because of the long holiday weekend it arrived a little later than it probably could have, but as far as shipping, packaging, tracking go, I give Boxwave an A-
I had actually been perfectly happy with the screen protector supplied by HTC, but as others have noted, in some cases it may have been a tiny bit too large, causing bubbles along one edge. I think I had put it on pretty perfectly, but then, in my obsessive need for perfection, had pulled it off a little and proceeded to snip away too much screen in an attempt to get it to fit just right, making for an install that now looked a bit messy and with a bit of glass exposed along a jaggedy edge of protector. But the Boxwave fit perfectly, and very easily, just using the instructions on the package (i.e. I just put it on dry, no sprays or water). I did steam up the kitchen a bit first to try to remove dust, and obsessively cleaned the screen for 10 minutes before attempting the install. On my first attempt I started from the short top edge and that caused a problem as the protector was now not aligned correctly down the right side, so I pulled it up and laid it down again from the long left edge, making for a much easier alignment. However, when I had pulled up the protector from the first attempt, I had used the little plastic card to ease up the protector; I think I caused some very minor damage to the protector at the point of contact, as there is now a tiny minor bubble there that is probably caused by a kink I may have made in the plastic. I'll work on smoothing that out, but it's off the screen and very minor (however, let that be a warning to others to be extremely careful if you need to lift the plastic off. I tried using sticky tape but the suction was too strong for it to get a grip, and using something like a pin seemed like potential to damage the screen.) For fit and finish and ease of installation, I give Boxwave an A (and me a B- )
The surface of the 'Crystal' clear screen (I don't know how different the 'anti-glare' version would be) is very slick. In fact looking at it, touching it, sliding my finger across it, and using the stylus on it, seems exactly the same as the actual glass screen on the phone. I went into notepad and made a new note so I could doodle with the stylus. With almost no pressure I could draw lines about 90% of the time, the rest it would skip a little. But with just a tiny amount of pressure, about what you would probably use in normal use, it was at 100% coverage, with practically no drag feeling, just a nice slippery but not too slippery feel. Sliding with my finger is fantastic, I can now scroll through the programs screen much easier than I did with the original HTC. For sensitivity and surface texture I give it an A+
Overall I give Boxwave and the Cleartouch an A+. I am reminded of that old Memorex commercial 'Is it real, or is it Memorex', because looking at the phone right now, I can't tell it has a screen protector, it looks just like glass. I am sure there are others out there as good, although I doubt there are any much better. There are certainly other quality ones that are much cheaper, $15 seems like a crazy price to pay for a piece of plastic. Others come with 2 or 3 protectors, and many have coupon codes you can find on Google. And others, like Bodyguardz, come with a solution for complete protection, not just the screen. Of course time will tell, but based on my A+ experience with Boxwave on my MDA, I really am quite confident of the same longevity and performance on the TP2.
One happy customer.
I've used Boxwave screen protectors and accessories for the past several years, and I can honestly say I've been always 100% pleased. I've used both the antiglare and clear protectors, and prefer the clear ones - but it's all a matter or preference, but overall a good purchase.
First, Boxwave screen protectors have always been my standard. I've tried a couple other types (mostly what's been included with devices or what I can find in retail stores) and won't likely be messing around with that again. I personally prefer the "crystal" models over the anti-glare because I didn't like the affect of the anti-glare pattern on the display. It kind of gave it a fuzzy moire pattern. The crystal basically looks like those super glossy laptop screens - looks great in low/medium lighting but could be a problem in certain direct light situations. Still, the trade-off is worth it to me.
Second, does anyone know if any of the existing TP2 protectors will fit the AT&T Tilt 2? The European/UK model looks not ideal because of the front camera hole and the T-mobile version appears to have a slightly different button layout on the bottom. Both the Verizon and Sprint models look right to me on the web page, but Boxwave support just says to submit a request and wait. I would prefer to get a protector on mine ASAP but am reluctant to order if the fit isn't right.
Daniel
bought one for my Sprint Touch Pro 2, it applied perfectly and not noticeable at all. I prefer it way over the invisibleshield I had on my Vogue which was too rubbery and reflective.
Am I correct to think the Boxwave screen protector for the Sprint TP2, Verizon TP2, and the ATT Tilt 2 are the exact same thing? I have been looking at pictures and the screen shapes look identical. The only different ones are the T-mobile and the front facing camera versions.
Thanks!
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
Hi guys,
Is there a pre applied screen protector on the Tablet S? Looking closely at the corners of the screen to does look like it but I haven't found any confirmation of this. I have a scratch on my screen and would obviously like to fix that.
Note that it was exactly like this on my Sony Ericsson Xperia arc where I just removed the pre fit screen protector and found a perfectly unscathed glass screen below. SE however declares that they apply a "shatter proof film" to avoid cracked glass displays
Can anyone confirm for the Tablet S? Has anyone tried to remove it?
Thx
Mine never came with one lol
Are you sure? Looks exactly like my phone. You would never have guessed it is there and you need to look really closely.
I bought one last week, and I can confirm there is a screen protector on the Tablet. I bought it in The Netherlands
- SnEAky
Yes, there is indeed one applied from factory, just as there was with my Xperia Play. I did go ahead and add an anti-glare protector on top of mine so I essentially have two protectors on mind now, but I think for most the hassle and frustration of trying to apply a protector without dust/air bubbles etc, simply isn't worth it as you are already protected.
There is a screen protector on the Tablet S just like most of the Android phones from SonyEricsson.
It is quite different from what you can get in the market. The screen protector from the factory is to prevent cracks or breaks. The screen protectors selling on ebay or whatever amazon are for anti-scatching.
I was recommended not to removed the factory screen protector on my X10 once before but I did it. After removing the screen protector, the glass is quite fragile like iphone's. It ends up with cracks at the edge when I dropped my phone from my pocket. Because I was sitting at that moment, the height is approx. 30cm.
Sorry for my bad english.
Mine has a screen protector. It's a 16gb one from the US.
Thanks, looks like the scratch is just on the screen protector then which is good news
On Xperia phones we know it's fine to remove (providing you don't drop it) but would like to hear from someone with a Tablet S. The my scratches aren't big enough to motivate the increased risk of breaking the glass, yet at least..
I have scratch on my screen already, so worry... now since everyone said there is a screen protector I feel better...
It seems redundant to put another screen protector over the factory installed. I can tell there is one on mine since it feels like plastic when I touch the keyboard...Is everyone still putting the sony screen protector over the factory installed?
I did, but it was a b*tch to do so with all the bubbles. But I managed to get them all, but one. See no reason why not use an extra screen-protection when you got one.
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
daClaus said:
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
Click to expand...
Click to collapse
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
kryddan said:
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
Click to expand...
Click to collapse
Have you found that the sony screen protector has reduced screen sensitivity... especially when typing?
can't said that I had. Did not play around with the screen before i placed the protection over it. It feels fine and responsive. The only thing is that it gets a little harder when it's hot outside and your hands gets warm, but that goes for all touch-devices I guess.
ditto
the matte finish is worth any loss in sensitivity, its fine with the official sony extra cover on and the matte is a BIG diff.
In fact it was a major selling point for me IMO, saw it in store next to the samsung tabs and the glare was hilarious. It wasn't until I was checking the box contents that I realised that the matte finish was due to an extra cover, but since that was part of the deal I didn't care. I didn't realise that it would have any impact on touchscreen sensitivity (?), in my experience with other devices I've not seen such an effect.
I also bought the matte one and applied it over the "other" (since there seems to be no way to peel it of) screen protector. The matte finish is great, and the touch feeling is much better than before. The original screen felt sticky and kind of rubberish when swiping with the finger, the matte one feels more dry. Great improvement!
Didnt get one in the Netherlands, but myn Tablet was a Demo machine in a store
I bought the official Sony protector and I actually really don't like it. I got it on with no bubbles or dust, and the matte finish looks nice when you put it on and feels nice when swiping etc.
Unfortunately, in my case, the touch sensitivity took a steep dive and made swiping vertical lists, vertical combo boxes, etc a real pain to do. By far the worst thing I've found is that the official protector leaves horrid fingerprint marks all over the screen, which kind of ruins the Sony's lovely sleek and shiny looks.
I love my Tablet to pieces, but the official protector I bought here in Australia is truly dreadful.
Don't be a fool, leave the factory applied protector on. It would be like peeling the safety film off of your windshield on your car. There is no practical benefit from doing it.
Either buy a clear aftermarket one or the matte Sony one, but don't degrade your tablet. If you have kids, however, encase it in carbonite ASAP.