Best Radio for WM 6.5 - Mogul, XV6800 ROM Development

Ive been having problems lately with my mogul for some odd reason it keeps resetting every like 10 second. Ive done everything from relockerr to unlocker and hard reset trying out radios and everything. i just want to know if there is ether a specific radio and BL thats compatible for the 21501 ROM?

Either of the unlocked bootloaders should work fine for it. There is a list on the wiki and a sticky thread at the very top of this forum with a list of compatible radio roms. Pretty much, though, I would probably just go with the latest one which I believe is a Sprint.
Also, if your phone is constantly resetting I would try flashing to your carrier's latest stock ROM and make sure that it is stable there first. If it still resets there then you may have a hardware issue of some sort.

Related

Flashed to no2chem's 6.1 rom and now phone reboots on its own, any suggestions

I've flashed to no2chem's rom and installed the 3.27 radio...phone works for a little then all of a sudden reboots and when i try to make calls it says its not authorized
now it just reboots before im able to even finish loading the device all the way
what should i do?
Just a few posts down from yours:
http://forum.xda-developers.com/showthread.php?t=374293
Not authorized issue also thoroughly discussed. Try searching a bit.
thanks but i've abanonded no2chem's rom. im still having problems calling (saying im not authorized) which im sure has been discussed but im having trouble finding it
The problem is not no2chem's rom, but most likely the wrong bootloader.
If you even try searching the word "authorized" you will find that you need to call Verizon.
you need to update the Radio to 3.27. Then it'll work.
I'm having the same problem just my Mogul is for SPrint.... Any sugguestion why It resets it self?
emillz615 said:
I'm having the same problem just my Mogul is for SPrint.... Any sugguestion why It resets it self?
Click to expand...
Click to collapse
For the Millionth time......
You MUST have matching bootloader, ROM, and radio!!!!
Read carefully.
http://forum.xda-developers.com/showthread.php?t=371314
quick note, this time there actually is a different possible reason (but it results, again, on not completely reading instructions *sigh*)
On no2chem's 6.1 rom 5050 and later, when you install you *must* do a hard reset and pull the battery for 2-3 minutes. This allows the dohicky to reset the thingermajig, causing everything to magically not reboot.
if you read his posts, he explains everything using slightly less technical terms, but if you do this, it'll work.
taxilian said:
quick note, this time there actually is a different possible reason (but it results, again, on not completely reading instructions *sigh*)
On no2chem's 6.1 rom 5050 and later, when you install you *must* do a hard reset and pull the battery for 2-3 minutes. This allows the dohicky to reset the thingermajig, causing everything to magically not reboot.
if you read his posts, he explains everything using slightly less technical terms, but if you do this, it'll work.
Click to expand...
Click to collapse
Yup. This step is the most crucial. Without it you won't get beyond the initial splace screen.
6700user said:
I've flashed to no2chem's rom and installed the 3.27 radio...phone works for a little then all of a sudden reboots and when i try to make calls it says its not authorized
now it just reboots before im able to even finish loading the device all the way
what should i do?
Click to expand...
Click to collapse
I had the same problem, i was using the wrong hard spl, i was using 1.20. The correct spl is 2.40 after using the correct one no problem at all. If it helps I'm new at this myself.
still not sure why anyone still uses the crappy, buggy, beta 3.27 radio. radio 3.35.04 is out and should be used with all new roms.

No phone calls with dcd 3.0.1

Got the radio upgrade 3.3x and all works well with 2.x dcd rom, but upgrading to 3.0.1 has problems with phone calls. Both receiving or outgoing, the device resets 10 sec into the call. Also Voice Command 1.6 not working. sucks.
verizon xv6800
I'd be willing to bet millions you didn't follow directions when flashing.
Nope. Cooked a kitchen, tried the Verizon Rom....neither work with 3.0.1. works great with 2.x though.
Voice Command 1.6 now working OK as well under 2.3.2. I is happy. Still looking for good GPS software. I really liked Earthcomber, but doesn't work with this rom.
If you tried to flash the radio standalone, then the verizon cooked rom...you didn't follow directions.
The ONLY way to successfully upgrade to 3.0.x is by flashing the sprint update to upgrade the radio.
OK so I cry for help. Why the heck would I apply a Sprint update to a Verizon handset, granted both CDMA. I upgraded the radio at the same time as 2.2. The 2.2 DCD rom I'm using that WORKS WELL should be no different than the upgrade to 3.0.1. Unless I'm forgetting to stop customization with a soft reset.
You're not getting the point!!!
The only reason to flash sprint's official rom is so you can update the radio to its latest version. After this is done, it DOESN'T MATTER whatever rom you flash next, such as a Verizon rom. Use DCD's 3.0.1 rom it should be working. You would have known this if you read instructions. If you flashed the radio alone first, then your settings (ESN, MSID, etc) will be wiped. You will have to re-enter these either manually or call up Verizon to do it for you. This is probably why you can't make calls.
Exactly my point. I flashed the radio with the Oli 2.4 and updated the radio from stock verizon. Then flashed 2.3.2 and all is good with the new radio. So why doesn't it work with 3.0.1? I just found my way to the In and Out Burger via Odyssey Mobile locator.
Everyone keeps telling me that i didn't follow the destructions but they don't point to where they are.
Maybe wrong radio ver?
Crap. Mine says 3.24.00. I guess that's my problem. I'm an idiot.
Please point me to the proper radio D/L.
Thanks,
Sorry for asking what is probably a simple question, but I am having the same problems. I have SPL-2.40.Olipro atm, installed the verizon ROM upgrading to 3.0.1 from NexVision's Hybrid rom. My radio is upgraded to 3.25 or whatever it was supposed to do fine. On vibrate mode, when a phone call is incoming, I get stuck in an ever ending vibrating. I can text, and attempt to cal lsomeone but nothing can be heard and no one can hear me. I know i screwed up somehow- but what exact steps do I do to remedy this?
Thank you in advance
We have to do the Sprint radio update to 3.35 first, which is an upgrade from 3.27. Then go to ROM 3.0.1.
It's always interesting to me how people jump up to say "you're doing it wrong" but don't tell you how to do it right.
Here's how to do it right.
http://forum.ppcgeeks.com/showthread.php?t=17667
Gecko122, There is more to the Sprint file than just the radio... It includes the ROM as well.... My understanding is this:
1st - Run Olipro unlocker 2.4
2nd - Run Sprint Official upgrade , NO CUSTOMIZATIONS.
3rd - Load Custom ROM.....
That has worked for me.....
PS - the DCD 2.x.x series do NOT play well with the new radio, hence the 3.0.1 kitchen.... Driver differences....
do i have to flash back to a former version of dcd or anything? or can i start from a messed up 3.0.1?
hi Penn,
Well, exactly what have you done to your phone?
Bootloader version?
ROM version?
Radio Ver?
Then we can start from there and develope a plan to help ya.
Ignore that above - I re-read you original post....
Here's what you can do and correct me if I'm wrong Penn...
You have Oli-pro 2.4 bootloader loaded
You have DCD 3.0.1 ROM loaded
You have the 3.27 Radio loaded?
If the above is true, then we have options..... Let me know
gcincotta said:
If you tried to flash the radio standalone, then the verizon cooked rom...you didn't follow directions.
The ONLY way to successfully upgrade to 3.0.x is by flashing the sprint update to upgrade the radio.
Click to expand...
Click to collapse
No, I flashed new radio stand alone package by dcd first day from an olipro 1.20 then 3.0.0 rom then 2.40 bootloader, and then one day later 3.0.1 rom... I never use sprint upgrade at all, and I have no problem about my phone at all. There is not just one way
No, I flashed new radio stand alone package by dcd first day from an olipro 1.20 then 3.0.0 rom then 2.40 bootloader, and then one day later 3.0.1 rom... I never use sprint upgrade at all, and I have no problem about my phone at all. There is not just one way
Click to expand...
Click to collapse
Correct me if I'm wrong, but weren't you the one with the extremely long, complicated post about how you were able to get everything working that way?
http://forum.xda-developers.com/showpost.php?p=2014972&postcount=326
Secondly, you may have been able to get everything working, but you're lucky. The chance of problems occurring by flashing this way is way too high in my opinion to even bother, not to mention others have had problems that absolutely cannot be fixed without reflashing back to stock and updating with the sprint update. That is why dcd removed the standalone radio from the Radio Rom thread.
Gecko, the reason why I did not "tell" you how to do it the right way is because dcd's thread has 94 pages of information on how to do it the right way. I've even posted several times on different pages in that thread with explicit instructions on how to. While I am always very eager to welcome newcomers to this community, I also strongly encourage them to read, research and educate themselves before touching their device. It doesn't mean I'm not a nice guy and don't like to help, because if you search my posts you will see that I help a lot around here. If you had simply taken 20 minutes and even skimmed dcd's thread, you would have found the answer yourself in no time.
gcincotta said:
Correct me if I'm wrong, but weren't you the one with the extremely long, complicated post about how you were able to get everything working that way?
http://forum.xda-developers.com/showpost.php?p=2014972&postcount=326
Secondly, you may have been able to get everything working, but you're lucky. The chance of problems occurring by flashing this way is way too high in my opinion to even bother, not to mention others have had problems that absolutely cannot be fixed without reflashing back to stock and updating with the sprint update. That is why dcd removed the standalone radio from the Radio Rom thread.
Click to expand...
Click to collapse
Wow... I'm sorry, I had not been keeping up with the issues of others, so until you said that just now, I had no idea. You are right, I am really lucky, so thanks for bringing it to my attention.
No problem

Mogul Official Sprint ROM: lots of different issues - please advise

Hi all,
So I installed the Official Sprint ROM issued this month and I have the following problems:
- Battery won't last more than one day
- Phone won't wake up from standby at certain times
- Phone slow after running some applications, including built-in apps like Word, Excel, or IE. Sometimes this result in the phone just simply hanging
In either situation above, except battery issues, a soft-reset is required.
I have tried the following:
- Do a hard reset, try without ANY applications
- Remove HTC_CM_Guardian.exe and SDDAEMON.exe
Anyone have the above three problems? with the new Sprint Official ROM?
I feel like going back to the old Sprint ROM. I have a separate BT GPS, so I don't care about A-GPS functionality as long as my phone is stable.
Why don't you cook a clean rom with the 3.0.1 kitchen and get rid of the sprint rom?
One question - did you let the customizations run after you installed the ROM?
If not, you need to hard reset let the customizations run, hard reset again and then you can bypass the sprint customization.
Otherwise......
......now that you have the new radio installed, I'd recommend trying one of the clean ROM's from either No2Chem (over at PPCGeeks) or DCD's 3.0.1 ROM.
DCD's has a "Touch" look to the skins and has over 24MB of RAM free on first boot.
All you'd need to do is run the 2.40 Olipro SPL unlocker and then flash DCD's 3.0.1 ROM.
Much more stable than the OEM.
nosmohtac said:
One question - did you let the customizations run after you installed the ROM?
If not, you need to hard reset let the customizations run, hard reset again and then you can bypass the sprint customization.
Click to expand...
Click to collapse
I did on the 1st try, but something gone wrong, most troublesome is that the "Text Message" account now shown in Pocket Outlook. So I hard reset again and let the customizations run.
nosmohtac said:
Otherwise......
......now that you have the new radio installed, I'd recommend trying one of the clean ROM's from either No2Chem (over at PPCGeeks) or DCD's 3.0.1 ROM.
DCD's has a "Touch" look to the skins and has over 24MB of RAM free on first boot.
All you'd need to do is run the 2.40 Olipro SPL unlocker and then flash DCD's 3.0.1 ROM.
Much more stable than the OEM.
Click to expand...
Click to collapse
So you're saying that it's better to use Sprint's official Radio but use DCD's ROM?
What I gather from this forum and PPCGeeks is that people either use Sprint's Official Radio and ROM or just forego that and use kitchen's ROM completely, but not a combination of both as mentioned above.
[EDITED]
OK, so I got Olipro and DCD 3.01 Kitchen. Just so I am doing the right thing since I have ALREADY installed Sprint Official Rom with Radio v. 3.35.05, please let me know if this step is correct:
1) Connect to ActiveSync. Sync as usual
2) Run Olipro v. 2.40. This will open a Command Prompt. Let it do it's thing.
3) Once done, load DC 3.01 Kitchen ROM. No other Radio ROM needed.
4). Done.
Am I correct?
There is no radio with the kitchen. The sprint official radio release (3.35.04) is the official radio whether you use the sprint official update rom or a custom rom of your choosing. No other radio works with the newer roms except this radio. That is why if you choose to use a custom rom, you STILL have to flash the sprint update to get the radio, then you flash your custom rom on top of it (with no radio) to get your own rom on there.
lanwarrior said:
Hi all,
So I installed the Official Sprint ROM issued this month and I have the following problems:
- Battery won't last more than one day
- Phone won't wake up from standby at certain times
- Phone slow after running some applications, including built-in apps like Word, Excel, or IE. Sometimes this result in the phone just simply hanging
Click to expand...
Click to collapse
I've cleaned that ROM (gutted to the base OS and functions) and have experienced none of those issues and none of those complaints are voiced in the thread using that kitchen.
I do not think that your problems are due to that specific base of Sprint ROM. Possibly some of the apps or simply a bad flash? Did you attempt to remove HTC Guardian or other components from within the active OS or did you extract and build your own ROM from the Sprint?
For severe battery problems there a couple of threads where a few people have experience excessive drains, but that's with the more recent DCD builds.
gcincotta said:
There is no radio with the kitchen. The sprint official radio release (3.35.04) is the official radio whether you use the sprint official update rom or a custom rom of your choosing. No other radio works with the newer roms except this radio. That is why if you choose to use a custom rom, you STILL have to flash the sprint update to get the radio, then you flash your custom rom on top of it (with no radio) to get your own rom on there.
Click to expand...
Click to collapse
I already have Radio 3.35.04 when I installed Sprint Official ROM upgrade. That's why I want to confirm that I need to run Opilo 2.40 unlocker and then upgrade to DCD ROM on top of the current Sprint Official ROM.
Keystone said:
I've cleaned that ROM (gutted to the base OS and functions) and have experienced none of those issues and none of those complaints are voiced in the thread using that kitchen.
I do not think that your problems are due to that specific base of Sprint ROM. Possibly some of the apps or simply a bad flash? Did you attempt to remove HTC Guardian or other components from within the active OS or did you extract and build your own ROM from the Sprint?
For severe battery problems there a couple of threads where a few people have experience excessive drains, but that's with the more recent DCD builds.
Click to expand...
Click to collapse
Yes, I tried it after Hard Reset. I did remove HTC Guardian from the active OS.
lanwarrior said:
I already have Radio 3.35.04 when I installed Sprint Official ROM upgrade. That's why I want to confirm that I need to run Opilo 2.40 unlocker and then upgrade to DCD ROM on top of the current Sprint Official ROM.
Click to expand...
Click to collapse
You are correct, you can flash any custom ROM on top of Sprint's. DCD's is a good choice.
lanwarrior said:
I already have Radio 3.35.04 when I installed Sprint Official ROM upgrade. That's why I want to confirm that I need to run Opilo 2.40 unlocker and then upgrade to DCD ROM on top of the current Sprint Official ROM.
Click to expand...
Click to collapse
That is correct.
DCD's ROM doesn't include the Radio, and the new radio version is what unlocks the GPS and EVDO REV A features. The SPL unlocker is what allows you to load ROM's that aren't OEM on your device, and If you aren't familiar with how to build your own ROM using DCD's kitchen (it's pretty easy once you get started), then he has carrier specific ROM's already linked on his most recent release page. The links are just above the images.
http://forum.xda-developers.com/showthread.php?t=376150
Yeah just unlock with olipro 2.4, then you have a choice between dcd (which I personally use) or another clean rom like no2chem's.
same issue as stated in first post
Hey just want to say great site guys! There is no other website that can comes close to the knowledge available here. But in response to the who started this thread the official sprint rom is crap! Once phone goes into standby or "LOCK" 99% of the time "Soft Reset" is required. Ive "Soft Reset" my mogul no B.S. 100 times since I've flashed there ROM. Radio is a great improvement but honestly, they need to hire or pay NOCHEM or DCD for their talents because w/out their ROMS the MOGUL would've ended up on the side of the highway. I agree with the last post. Use the official radio, but don't run yourself through the wringer with the SPRINT ROM. You will rip your hair out!
meek420, again, I've had zero issues of lock-ups using a cleaned out version of the Sprint ROM.
I do not think such problems are endemic to that ROM.

Stuck on Telus Boot screen

Well I just attempted to upgrade my Rom.. First I loaded titan_SPL_2.40-olipro on.. It seemed to all go fine.. I can boot into the Bootloader on the phone fine and it shows that version. Then I loaded dcd 3.1.2 (Official GPS/RevA) - Windows Mobile 6.1 OS 5.2.19213. It seemed to load fine to.. went to 100% and finished phone restarted and is now stuck on the Telus screen.. Tried reloading the ROM again same thing.. Tried a different rom same thing.. I also cant establish a active sinc to my PC anymore.. Any ideas? Thanks..
I was going to try loading a factory ROM again.. I just read that people advice not to load a factory RON on this verion of SPL, correct?
Well I decided to give it a shot and load a factory ROM on again and it worked its back to life.. So my question is what should I do now, I would still like to upgrade the ROM but don't wont this to happen again.. Do I try reloading the SPL?
You are missing a step.
steps are
1. Load bootloader
2. Load Sprint or alltel OEM rom with 3.xx radio.
3. Load custom rom. If possible one with extended rom, that will erase customizations from ext rom.
here are detailed instructions for telus
http://howardforums.com/showthread.php?t=1369027
here is another 6.1 cutom rom
http://www.howardforums.com/showthread.php?t=1372511
jim_l, as mentioned you are not using the appropriate radio for your chosen ROM.
The previous post is in error because you may not mix any 3.xx radio with the latest ROMs. Avoid using radio 3.27 as that was only paired with a briefly used leaked ROMs. The compatible radios are 3.35.10, 3.37.20, and what most now seem to recommend, 3.39.10.
There are no special instructions for Telus when flashing. The highlighted Wiki and radio stickied threads at the top of this forum have all of the troubleshooting and instructional information that you required.
A hint to others, rather than first posing questions and waiting for help, it's often quickest for you to first see what existing threads and solutions are present in a forum. There's a search function and some very self explanatory labelled threads stickied to the top that occasionally get overlooked.
Thanks, I will do some more reading.. I read until my eyes bleed and thought I had it figured out. Guess not... I have been browsing forums since forums existed and know my way around... dohhhh
Thanks again..
Well I did more reading and I got it going with dcds ROM thanks all...
Only question I have now, is it seems my phone cant geta data connection.. It just doesnt dial out for it..
jim_l said:
Only question I have now, is it seems my phone cant geta data connection.. It just doesnt dial out for it..
Click to expand...
Click to collapse
Did you install one of DCD's appropriate carrier CAB?
Ya I did install it.. I just reinstalled it and all is well.. Thanks a million..
Did you also record and now check your EPST data? Is it all as it should be?
I did record all the EPST data, I couldnt get into EPST for a while.. I rebooted a couple times and now it lets me in.. seems to be all the same.. THanks..

HTC HD2 - Phone Doesn't Ring Sometimes

I have an HTC HD2 and I'm on T-mobile. What I've noticed is that my phone doesn't ring sometimes and then I'll just get a voicemail notification (if voicemail was left). It's an intermittent issue, I've tested it several times from another line.
Does anybody know what the issue is? I did a search on Google and there seems to be a lot of the same issues others are having across other networks and other versions of the HTC but, haven't found a solution.
Thanks
i had never heard of this issue until yesterday, when my phone simply did not ring, then i got a txt asking why i didnt answer. very confusing. only seemed to happen once. i have done a lot of tweaks, so maybe ive changed something i shouldnt have. if it helps im using a generic, unbraded, factory unlocked HD2, with CleanEX DsE 3.5 and radio 2.11. have you tried re-flashing the ROM and seeing if that helps?
interestingly, i have noticed that my signal can be irratic at times, often just dropping for no reason, then coming back about 30 seconds later. i live in a full signal area, so i know thats not a problem. also my data connection will 'freeze' at times, where it shows its connected, but nothing is able to use it, i have to disconnect and reconnect, and this may take 2 or 3 attempts before it connects and is usable. have you experienced the same issues?
matthewharmon102 said:
i had never heard of this issue until yesterday, when my phone simply did not ring, then i got a txt asking why i didnt answer. very confusing. only seemed to happen once. i have done a lot of tweaks, so maybe ive changed something i shouldnt have. if it helps im using a generic, unbraded, factory unlocked HD2, with CleanEX DsE 3.5 and radio 2.11. have you tried re-flashing the ROM and seeing if that helps?
interestingly, i have noticed that my signal can be irratic at times, often just dropping for no reason, then coming back about 30 seconds later. i live in a full signal area, so i know thats not a problem. also my data connection will 'freeze' at times, where it shows its connected, but nothing is able to use it, i have to disconnect and reconnect, and this may take 2 or 3 attempts before it connects and is usable. have you experienced the same issues?
Click to expand...
Click to collapse
I haven't tried flashing the ROM, I've been hesitant on doing that since I feel like I might mess something up. I'm not sure how to either. I have SPB backup, so I would hope if I messed something up then I would be able to easily restore it.
I haven't really noticed any dropping, my call qualities have been good. I've tried to dial a number before and it might drop right then while it's trying to make the call. So, I'll redial the number but, once I'm connected I haven't noticed any issues with calls dropping.
Data connection has been working pretty good as well, I've been using the wifi quite a bit and not really had any issues. I don't have a data plan setup with T-Mobile so I just use the wifi. I don't know if using the actual data connection would give different results than using the wifi.
flashing a rom is really easy it's all autoinstall, just have to read carefully / look at the video's, there A LOT of them out there.
HectiQ said:
flashing a rom is really easy it's all autoinstall, just have to read carefully / look at the video's, there A LOT of them out there.
Click to expand...
Click to collapse
updating the rom may help, as it will also update the radio drivers. what i would suggest, if you dont have much experience in flashing a ROM is to have a look on the official HTC support site. on there it will give you a list of updates avalible for your phone. download the latest ROM for your phone (for me, this is WWE 1.66 with radio 2.06) and install that. any data on an sd card will remain intacted, but sync you phone with outlook and backup stuff like contacts, messages etc before you do it. i personally use microsoft myphone to do all that.
flashing the ROM with an official one is very straight forward, and as quoted above, its all auto install on the phone, and there are about 3 or 4 steps that you need to do PC side (this is all explained in the update program you download). i would give that a go and see if things improve, you will also gain improved performance, new features and better battery life with newer ROMs, so its worth doing
custom roms are a bit more tricky to install, but often offer more features and improvements over stock roms. if you need help with this have a search on the forums, there are lots of guides and help on how to flash with a custom rom
matthewharmon102 said:
updating the rom may help, as it will also update the radio drivers. what i would suggest, if you dont have much experience in flashing a ROM is to have a look on the official HTC support site. on there it will give you a list of updates avalible for your phone. download the latest ROM for your phone (for me, this is WWE 1.66 with radio 2.06) and install that. any data on an sd card will remain intacted, but sync you phone with outlook and backup stuff like contacts, messages etc before you do it. i personally use microsoft myphone to do all that.
flashing the ROM with an official one is very straight forward, and as quoted above, its all auto install on the phone, and there are about 3 or 4 steps that you need to do PC side (this is all explained in the update program you download). i would give that a go and see if things improve, you will also gain improved performance, new features and better battery life with newer ROMs, so its worth doing
custom roms are a bit more tricky to install, but often offer more features and improvements over stock roms. if you need help with this have a search on the forums, there are lots of guides and help on how to flash with a custom rom
Click to expand...
Click to collapse
I have a T-Mobile HTC HD2 (U.S.) and I went to the HTC site and on the download page for the ROM update it has ROM Version: 1.66.707.1. When I check the ROM version on my phone it is: 2.10.531.1.1 (82076) WWE
Also it says on there - Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects.
So, I suppose I'll have to start looking into the custom ROM's.
ubaidabcd said:
I have a T-Mobile HTC HD2 (U.S.) and I went to the HTC site and on the download page for the ROM update it has ROM Version: 1.66.707.1. When I check the ROM version on my phone it is: 2.10.531.1.1 (82076) WWE
Also it says on there - Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects.
So, I suppose I'll have to start looking into the custom ROM's.
Click to expand...
Click to collapse
good job you didnt flash that, the 'undesired side effect' of flashing that official rom (or any other non tmous official rom) on your tmous phone would have been a permanently dead phone.
im not sure about tmous roms, maybe have a look on the t-mobile us support site and see if anything is listed there. if you want to look at custom roms the first thing you will need to do is get hspl (the latest version is hspl3, which i believe is compatible with tmous). if you search on the forums you can find the official thread. this removes the security checks and allows you to install custom roms. after that you will need to choose a radio version. again search on the forum and find the latest one compatible with your hd2 (there is an official radio thread which i would look at). this normally comes with an updater program included, but if not, search for 'custom ruu' and follow the instructions on the thread. finally you need to pick a custom rom. there are literally 100s to choose from, with different features, looks, apps and even some android builds. personally, i use cleanex dse because of its speed and stability. im not sure if this is tmous compatible, so check on the rom threads.
alternativly, you could have a hardware fault with your phone, which will be repaired under warrenty, so you could go down this route. personally, i would do this first and see if things improve, as although custom roms can be uninstalled and the steps can be reversed, the warrenty is voided by using hspl and installing custom roms.
still have the problem? Might not need a hard reset. Try this solution here:
(LINK)
One of your programs might have deleted the "Volatile" folder, so
no Volatile folder => no WMPlayer => no MP3 playback => no ringtone.
Re-creating an empty "\Application Data\Volatile" folder usually brings it all back.
If it fixes the problem temporarily and recurs again, you might have to change the temp folder as outlined in the link above, or just install that CAB.
Hope this helps. If this solves your problem, please edit/add [solved] to your title.
atlaswing said:
still have the problem? Might not need a hard reset. Try this solution here:
(LINK)
One of your programs might have deleted the "Volatile" folder, so
no Volatile folder => no WMPlayer => no MP3 playback => no ringtone.
Re-creating an empty "\Application Data\Volatile" folder usually brings it all back.
If it fixes the problem temporarily and recurs again, you might have to change the temp folder as outlined in the link above, or just install that CAB.
Hope this helps. If this solves your problem, please edit/add [solved] to your title.
Click to expand...
Click to collapse
I did what u said and installed the cab but still the same problem. Doesn't ring sometimes
Plz if anyone had this problem and knows how to solve it, I'll be so thankful if you help me. It has been irritating me for a month :S
Same here...and its flooded in the net....still no solution..check this out and if anything comes to you...do pls let me know...
http://forum.xda-developers.com/showthread.php?t=850280
I have the same problem. Sometimes incoming call does't ring, altough the phone vibrates. I'm using an european HD2 with the original 1.48 rom. I didn't found the reason... the changed tweak... the influencing application installed. It seems happening randomly, I can get a call without incoming call ring and after a few minutes I can get a second call from the same caller with a normal ring.

Categories

Resources