Related
Hi All, since a lot of us are getting the shift now, i guess it's time to think about which screen protector you are going to use, personally i always enjoy the Martin Field Overlay Screen protector, but they don't seems to have one for the shift yet, what do you guys think? found any good screen protector you are going to use?
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
jarbi said:
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
Click to expand...
Click to collapse
yes, i am aware of that, it just i have been using HTC for more then 7 years now, past experience told me i better wait for better screen protector, because once you put it the HTC one, it's so difficult to remove it, and if you do try to remove it and swap it with something else, you leave a mark on the screen, some user even experience bend and uneven screen because the original one is just so sticky.
There don't seem to be many screen protectors specifically for the Shift yet, I'm sure there will be soon. I fitted the included one but not very well, I managed to get a couple of dust specks under it.
I've ordered some generic 7" protectors from Durasec http://www.durasec.com/catalog/index.php?language=en
I also ordered one of their liquid nanotech screen protector kits, don't know much about it but it appears to be a liquid which you spray onto the screen to form a seal. Should be interesting...
Is it neccessary?
Hi,
please, give me an answer to a stupid question?
Is it really necessary to apply a screen protector. Why don't the manufacturers do it in the first place.
What are the advantages, what the disadvantages. Okay, protection comes to mind as an advantage, but shouldn't the original screen be resilient enough?
I'd really like to here some informative opinions.
I have been using a HTC Vario II for some time now without any protection and I can't detect any scratches.
Settembrini
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
firedup said:
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
Click to expand...
Click to collapse
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Pantaloonie said:
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
Click to expand...
Click to collapse
mmm. sounds interesting!
I've got the original on but I have a scratch on the screen and wanted to remove it to see if its just the screen protector or the actual screen that is scratched. Have tried in vain to get at it to peel it off...
Just managed to get a corner - it came off no problem and thankfully the scratch isnt there! Just need a new protector now, my OCD is starting to kick in. Let me know how you get on with the Duratecs! Cheers
wu5262 said:
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Click to expand...
Click to collapse
sounds posh! I'll check it out, thanks
Screen Protector Ultraclear and a Anti Glare
http://shop.brando.com.hk/search.php?keyword=HTC+Shift&Submit=Product+Search
I have had this for my Athena and Brando also have two versions for the Shift.
Computersylvia
DO NOT by the Durasec. Got mine from Germany, welcome to bubble hell.
Just wish I knew where the original ones are from....
Anyone found any decent ones?
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Pantaloonie said:
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Click to expand...
Click to collapse
I'd leave it on if I were you - I only took mine off as it had a hair underneath and I was losing sleep over it. Took a while but once you get a hold of a little corner it lifts off no problem. I've emailed HTC to ask if they can send me another but I'm notn holding my breath.
Would stay away from the standard Duratec - waste of £8. Let me know if you try the liquid one though!
Hi -
Anyone used the liquid Duratec shield on the Shift yet?
Cheers - Dave
Duratec Crap
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Settembrini said:
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Click to expand...
Click to collapse
How did you remove the original screen protector without damaging the display? What is the problem with the Duratec screens?
Hi,
removal was difficult, but I did it. I don't know the exact English words. I used this sticky tape which you wrap up parcels with, tape is of a brownish colour. That I stuck onto the screen protector until it lifted in one corner.
Duratec is thin and cheap material and I guess it is not possible to get it on the screen without lots of bubbles.
Now I have ordered a protector from Brando, was that the name?
We will see.
S.
I really like the anti glare screen protector from www.pocketpctechs.com . I use it with my both my SMT5800 cellphone and my Motion Tablet PC. I'm hoping I can get one sized for the Shift. But my Shift is not here yet so I don't know the size. I can't even tell I have a screen protector with this brand.
screen protector abuse
Hi,
any news about the "best" protector.
In the meantime I have abused 4 or 5. Duratec's cheap ones aren't of any other use than to clean the screen from dust particles.
I tried the Brando "ultra clear" was that the name? Relativ easy to apply, but in the end I fiddled with it too long. Had to peel it off.
Next I tried Brando "plus". Easily to apply, but foil slipped underneath the edge of the screen, when lifting it up to clean off a piece of fluff the protectors edge was damaged.
But the last one is really easy to apply. But, but, they or the distributers just declared them to be for the Shift, originally they are for the eee, how many eeeees were there?
So the screen protector doesn't really fit. At the edges there the foil doesn't cover about 1 or 2 millimeters of the Shift's screen.
Maybe somtime soon they will sell a protector that is for the Shift.
Please, if anyone has got the ultimate protector mention it here:
perfect fit and easily to apply would be nice features.
S.
During a mtb-trip the TP2 accidently fell out of my back pocket and got heavily scratched on the chrome shell just outside of the LCD screen. (thank god the screen got protected by the screen protector)
Would it be possible to replace this Chrome Shell and if so where to buy it?
thx
That chrome shell is apparently called a bezel (didn't know that - am not a native speaker) and that made searching quite a bit easier.
Ebay did the trick:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170367765984
The chrome benzel is plastic painted or metal?
Black Phoenix said:
The chrome benzel is plastic painted or metal?
Click to expand...
Click to collapse
Chromed plastic
can we install this chrome bezle on the tmobiel version?
I doubt you can put it on the t-mobile version. Their version seems to be more square at the edges. But this is cool for the rest of the versions, I could put this on my sprint one when I get it.
This is only the front side right?
I'm kind of looking for a back cover. I've found one at cnn.cn but it contained both for the price of $90 approx.
Random question I hope I got this in the right thread
Has anyone ever bought a new shell for there whole phone and assembeled it themselves?
As i saw this on ebay:
http://cgi.ebay.co.uk/for-HTC-Touch...s_JN?hash=item45ed6fbded&_trksid=p3286.c0.m14
I thought it looked kind of cool and a good way to personalise your phone but i have no idea how hard this would be, any ideas?
Thanks
Rather than get a new one for 30 sumthing bucks, why don't you remove it, sand it and then have it painted black or even chrome?
It'll cost you a lot lesser. A black unbranded HTC TP2 should look awesome. The one from Verizon looks killer.
Have you ever done this? What sort of paint would you use? I don't think this would work as well as you think it would...
Boldra said:
Have you ever done this? What sort of paint would you use? I don't think this would work as well as you think it would...
Click to expand...
Click to collapse
I'm sure modeling paint would work fine.
biscuits1978 said:
I'm sure modeling paint would work fine.
Click to expand...
Click to collapse
I'm not. I would suspect vinyl dye is what you want.
All those "OEM" replacement housings and such are crap.
They never fit like the original.
Think twice before trying to replace something like that, there are alot of little pieces and flat cables.
I`ve been modding playstations and such for years so i`m experienced to say the least but I wouldnt risk my tp2 for it.
ive tried this with my old phone...
it does not work well.. i tried with different kinds of paint, primer, sealer, clear coated afterwards... it doesnt work
the plastic housing we have and can get are dyed into the plastic.. its not painted or coated..
the minute you put it in your pocket or it hits your keys or something.. it will chip off...
i have the tmobile version....i thought i had got permanent marker on the gold part of the phone, but do any of u know if it is black paint under the gold?
i was thinking of getting a battery cover and spraying it black. Would it work?
i have painted alot of mobiles luckly for me my m8s dad owns a car paint factory i spreyed one chrome and used 2pac laqueer on the top ot was minted i may chrome my whole tp2 i am gonna w8 till warrenty runs out
anyone has experience with assemling/disassembling this chrome shell..?
i've got a big scratch/dent and i would like too buy a new one but it seems like it's pretty too get it off.. let alone getting the new one on, in one piece
Tilt 2 chrome bezel
Anyone know of a source for the chrome bezel on my AT&T Tilt 2?
Ron
Calif
I want to install the AT&T's Chrome frame on my Sprint phone and was just wandering if I buy the bezel does it include the power button? and if not does anyone know where I can get it?
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
I don't bite
Alik4041 said:
I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened.
Click to expand...
Click to collapse
It was 2000 the first time I experienced that. It was a palm m500 and a little piece of dust got on the tip of my stylus. I didn't hear it so much as I felt the friction, but my reaction was much the same. I haven't gone without a screen protector since.
As to the included screen protector, use it if it works for you, but you'll typically find better durability in popular protectors like the boxwaves you linked to or clarivues. The clarivue that I put on my Palm TX in 2005 is still on it, and still looks good.
The thing I worry about with a lot of those no name brand cases on ebay is how well do they really fit? The last thing you want is to have them falling off. I don't know if my fear is well-founded or not, but I didn't really want to gamble on it. But as far as TMo goes, I'm not sure what to tell you. Boxwave actually has a pretty cool soft case called the praetorian crystal slip, but not for the TMo version. Seidio seems like a nice quality joint, but they don't seem to make their innocase for the TMo version either.
Edit: I suppose you could check this thread out.
I had the acrylic case with screen protector and I removed it shortly after purchasing. The porblem I had is that the screen protector is superficial and although it works sometimes when I typed certain virtual keys another part of the screen protector would also bend down on my press and caused for a different near by character to be pressed. Eventually I got rid of it and just purchased a seperate screen protector.
I really am looking for quality though for a case, just want something that's not too big or will not hinder usage of the phone. I've heard a lot about the ghost armoring and all. I'm considering it, but that will not save a phone from a fall or anything like that.
Consider an all-body protector (such as zagg or bodyguardz), combined with a pouch or holster case that you remove the device from to use it.
This is my preferred method, so my TP2 is well protected when it's not in use, and I'm completely unhindered when I am using it (but still with scratch protection).
Note that the protectors need to be applied very slowly and carefully to make sure they're lined up well and properly stuck down around the edges.
Alik4041 said:
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
Click to expand...
Click to collapse
I have the same clear hard plastic case and absolutely love it. I've tried the body glove case, and had some issues with sliding the keyboard in and out. I just use the screen protector that came with the phone, and the clear hard plastic case. No problems at all, though I still have to take the case off every once in a while to clean it, but you'd have to do that with any case really. Get a lot of compliments on it.
dougstoner said:
I have the same clear hard plastic case and absolutely love it...
Click to expand...
Click to collapse
Does it add much bulk...???
da9th_one said:
Does it add much bulk...???
Click to expand...
Click to collapse
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
dougstoner said:
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
Click to expand...
Click to collapse
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
I just ordered some phantom skinz, I'll report back when they get here.
liht said:
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
Click to expand...
Click to collapse
I think it fits better than the body glove case. Plus, it looks way better. I've had mine for a while now with no problems. Even take it off a bit to clean it up, and no issues. Check my old thread out...Have pics on post #5.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case
I was searching around and could not find a gel/TPU type clear case for the G1...for those of you who do not know...here is one example of a Nexus One case like what I would want:
http://cgi.ebay.com/2-Soft-Case-TPU...t=LH_DefaultDomain_0&var=&hash=item746a91e417
I know they do not show a completely clear one, but that is the material/type of case I would like. It is not like a typical silicone case -it is slightly like a hard case being that it does not bend as easily and it is not floppy at all.
Any ideas?
Heres the problem that I see...
How would you open the keyboard with that cover overlapping the front of the phone? That would probably be the reason those style covers don't exist for the G1.
As my fellow Oregonian said.. Soft cases and a slide keyboard won't really work.. If you look at the hard shells you'll see how the screen has it's own little part that clips on.. soft shells wrap instead of clip on...
I fail to see why they could not have a separate piece to put on the screen...?
If there is no such case... then could someone recommend a thin, yet tough, hard case? (preferably clear)
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Kemekill Products said:
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Click to expand...
Click to collapse
Yeah I understand what you mean and thanks for that info...but - I was thinking not of a soft case 'clipping' onto the screen but you could slip a cover over it or around it -I am SURE there is some way to do it....
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
SolemnWishing said:
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
Click to expand...
Click to collapse
LOL WOW THANK YOU!!!! How did you find that ? it should not be labeled as silicone (I think)..... wow that is exactly what I am looking for! I knew it was possible.... any way - I wish it didnt cost so much, the others I see like it(on other phones) is significantly cheaper (like under $5.00 with shipping included).... If I cannot find any cheaper ones I will order that one...
Thanks again, I cant believe you found just what I was looking for...
SolemnWishing said:
I think this is what you are looking for:
QUOTE]
Thank you as well. Been looking for one just like that.
Click to expand...
Click to collapse
yea that case is rocking . I as well was looking for something like this! Thanks!! hey erebusting did you order it? did ya like it?
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
erebusting said:
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
Click to expand...
Click to collapse
LMAO...Reading this was funny for some reason
Can you post some pictures? And would you recommend it? I am looking for a new case for my phone, and this one is one that I am considering
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
zinite said:
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
Click to expand...
Click to collapse
zinite, I understand that, but see I do also have a screen protector on but the section of the case which goes on the screen is fitting fine, the section for the body is the part I have the complaint about. I will definately check out some Seidio cases now that you have mentioned that.
SolemnWishing, Here are some pictures of the case next to a clear hard case (which is actually clear and not yellow...)
Ace42, glad you got a laugh! haha...BTW I am wondering why you were laughing though, kind of odd to me ATM...
WOW! that case is really yellow. i was thinking about getting one thinking it wont be that yellow. but that is definitely gross smoker yellow
Dang... it looks like someone left that out in the sun for like a year or something..
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
mattv888 said:
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
Click to expand...
Click to collapse
I also love the feelings of the G1 without a case, but I have dropped my previous phones too many times to take that chance... haha
Any ways... Those pictures are from the same day of receiving that case, so it must be some fault on the seller....
its really a disappointment since there are no other cases (that I can find that is) like that for the G1...
any other recommendations/ideas?
Has anyone ordered one yet?
I saw this on their site but im a little apprehensive as i've had terrible luck with otterbox products in the past.
http://www.otterbox.com/Alpha-Glass...t,pd.html?start=1&cgid=motorola-nexus-6-cases is the link to the tempered glass for those who are wondering where is the link.
zephiK said:
http://www.otterbox.com/Alpha-Glass...t,pd.html?start=1&cgid=motorola-nexus-6-cases is the link to the tempered glass for those who are wondering where is the link.
Click to expand...
Click to collapse
Thanks. Meant to post it, but haven't had the chance
Its not available for purchase yet, how can anyone buy it? lol
The device they show on their web, is not a nexus 6 how can we figure it completely covers the whole screen?
fethi2 said:
The device they show on their web, is not a nexus 6 how can we figure it completely covers the whole screen?
Click to expand...
Click to collapse
Just them using a generic stock image for now. I'm sure it will change once the final design of the screen protector is finished.
Jesus $34.95 for a screen protector? Hopefully it comes with a midget to apply it for me perfectly, I would just mess up the application like I always do with screen protectors.
I'm flexible on the included midget, I'll also accept an attractive woman to apply it perfectly.
Sent back Otterbox Alpha glass
I bought the Otterbox Alpha Glass for Nexus 6 from Amazon for, like, $1000 (okay, it was closer to $37). I didn't like it because it didn't seem to stick on either short edge and parts of the long ends of the phone. I figured it was just me. I asked to have it exchanged. Then I watched someone on Youtube install his, and he ran into the exact same problem. So I think I will just get a refund and then... I don't know. I've already tried the expensive plastic one from Zagg with no luck.
godsafk said:
Jesus $34.95 for a screen protector? Hopefully it comes with a midget to apply it for me perfectly, I would just mess up the application like I always do with screen protectors.
I'm flexible on the included midget, I'll also accept an attractive woman to apply it perfectly.
Click to expand...
Click to collapse
I like your style.