This is just a quick post with my comments on the invisible shield, in case it's useful to somebody looking for a screen protector...
Pros:
- Thick, feels very protective. No worries about putting it in a pocket and getting it scratched from keys or change
- Air bubbles really do work themselves out after a few days of use, even on a completely ham fisted install!
- Doesn't affect screen, you can still see it in daylight without rainbow or mirror effect.
Cons
- B****rd to install. Way fiddly because of all the little corner flaps and cut out bits.
- Slightly sticky to the touch means finger glide action isn't what it could be. Also scrolling with a stylus seems much more hit and miss than without the protector
- Not particularly cheap.
I'll be keeping mine - I'm mainly concerned about protection (which it should excel at) and with a little adaption you can get used to the decreased screen sensititvity. I find using the back of the fingernail to scroll actually works better than a finger.
As an aside, the best protector I had in terms of a balance between feel and protection was a generic cut-to-size one from Palm! Unfortunately it only covers the display part of the TP2 front, it's not big enough to cover the whole front.
Hope that helps someone!
Marc.
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
omarbadr36 said:
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
Click to expand...
Click to collapse
That's what I did
omarbadr36 said:
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
Click to expand...
Click to collapse
I forget to inform them not to apply the Raceshield screen protector as it is too thick and it gives a funny and unresponsive feeling when you touch the screen.
I might change the screen protector to Martin Field instead.
does the invisibleshiled protect my device when it´s falling down to the ground?? or will the phone be damaged??
djkasmic said:
does the invisibleshiled protect my device when it´s falling down to the ground?? or will the phone be damaged??
Click to expand...
Click to collapse
Invisible Shield protect your device from scratches only.
If it falls onto the ground, it'll damage your phone for sure.
Get a pouch or a case if you need that kinda protection.
i have just installed the invisible shield on my touch pro2, not particularly hard, because I have lots of experience installing these.
But if you are a noob, it will be very tricky.
Even if you install it properly, you might still get dust or dirt underneath, and you may not realize it until it has dried up, which is too late.
I got some big bubbles underneath, waiting for it to dry.
I would only recommend the invisible shield for the back part, as for the screen, it is better to stick with a regular screen protector.
Scrolling and figure gestures are not as smooth if you use the invisible shield,
i will post pics up later! cheers.
I put my IS on last night. My impressions:
1. The back fits very nicely.
2. The front doesn't fit quite as well, but you can get it on with enough patience.
3. There are a few small bubbles, I'm still waiting for them to go away.
4. Today the bubbles are still there, and the front has a rather sticky feel to it. I don't like the feel.
5. The back cover sticks very well to the gell pad I use in my car. (bonus!)
6. I don't like the ridges on the sides left by the front cover.
7. If the bubbles don't disappear completely, I will find a replacement for the front cover.
Doesn't the phone come with a proective cover on the back already and a screen protector for the screen? I would have thought that would be enough?
DJ_Enigma said:
Doesn't the phone come with a proective cover on the back already and a screen protector for the screen? I would have thought that would be enough?
Click to expand...
Click to collapse
The 'cover' on the back is just part of the back's design.
And the screen protector that comes with the phone, well, not sure about everyone else, but mine peeled off within a few days of it going in and out of my pocket.
leginag said:
The 'cover' on the back is just part of the back's design.
And the screen protector that comes with the phone, well, not sure about everyone else, but mine peeled off within a few days of it going in and out of my pocket.
Click to expand...
Click to collapse
Does the cover on the back come off? I'm confused now.
DJ_Enigma said:
Does the cover on the back come off? I'm confused now.
Click to expand...
Click to collapse
The "cover" on the back, which can sorta be seen when you look at the volume rocker doesn't come off, which is why I said it's just part of the design.
You can place any protection you want on it.
could anyone please post some pictures of the invisibleshield on tp2??
djkasmic said:
could anyone please post some pictures of the invisibleshield on tp2??
Click to expand...
Click to collapse
Also, not just what it looks like on the physical device, but some good pictures of what the SCREEN looks like with phone on? So many screen protectors distort the screen image (thinking to my mother's ipod touch screen protector that makes the pixels all rainbowy and aliased looking) and I have yet to see ONE picture of what the actual display looks like when the screen is on.
tduck said:
So many screen protectors distort the screen image (thinking to my mother's ipod touch screen protector that makes the pixels all rainbowy and aliased looking) and I have yet to see ONE picture of what the actual display looks like when the screen is on.
Click to expand...
Click to collapse
Sorry, I have no photos to offer. I can tell you that the screen does look a bit "rainbowy" when I have polaroid sunglasses on. (When driving) It's enough to be a minor annoyance, no more. Still very easy to see the screen, which is a big plus comin from a Tilt that could not be seen at all in my roadster.
Also, as a general follow-up to my earlier rant-
All the bubbles have worked out, and I've grown accustomed to the sticky face. So I will keep the IS on my TP2. I really likethe idea of the phone being well protected from all the abrasive items that find their way into my pockets.
Related
Does it comes with screen protector in the box? Like Touch Pro..
Asking because I ordered one, until it comes from Hong Kong...
to have something on screen...
thx
yes there is, as is a soft protection bag.
there is but...
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
imee.h said:
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
Click to expand...
Click to collapse
I think the screen protector is not too bad, it is hard plastic not that rubbery stuff. It is certainly nothing like those cheap ones that you find in local shops and it covers the whole face of the phone, not just the screen. The cloth bag cover that comes with it is OK, but it is a bit thick. I found a black silicon cover that is made for the iPhone 3G, I made the hole bigger for the earphone plug and a new hole in the back for the camera. I saw this video of it on YouTube (not my video http://www.youtube.com/watch?v=xUOgFQ8dpzo . It isn't a perfect fit but it's pretty good until the official covers are available.
The hard plastic covers made for the iPhone won't fit the HD
My story: i snobbed the screen protector since i never used any in the last 10 years, and peeled it badly since i thought i would have never used it...but looking better to it, it was not too bad! then, I ordered two original replacement protectors from HTC, installed it VERY carefully....and now they are essentially invisible and you'd need time to realize that the screen protector is actually present....
So, refrain from excitement when you open the box!
I thought I'd read to steer clear of the protector in the box? You guys are saying to go ahead and put it on?
Screen protector
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
razor_amd said:
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
Click to expand...
Click to collapse
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Noony said:
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Click to expand...
Click to collapse
Well, i disagree.
I seem to be able to get the phone in it with minimun effort, seems that it expands after a little use, like new shoes or clothes...
my gf put on the screen protector that came with the phone.. and i guess shes good at it haha cuz we put it on with no bubbles.. no edges up.. no nothing. PERFECT. it looks great. dont even notice it. ive been using the pouch that came with it and i like it. works fine.. squeeze from the bottom to take it out and just hold it slightly firm on the sides to put it in.. pushing down from the 3.5mm jack so you dont accidentally turn on the screen again with the power button.. gets slightly easier after a bit .. dont be scared =P
Is the screen protector in the box the same as the ones sold on htcaccessorystore.com (and other places like expansys) :
HTC Touch HD Screen Protector SP P200 (2 Pieces) ??
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=173045
I managed to put on the original screen protector with little hassle but hate the quality. Hope martins ship their fast.
is there a need for screen protector at all. I mean can I damage thescreen with stylus or my fingers?
YES! and a good quality piece!
I had accidentally hit my kaiser screen with seat belt metal piece, thinking screen is damaged. Therefore, not willing to remove the film to face the reality. Only yesterday, after confirming my blackstone is configured and running well, I removed my Kaiser screen protector. The screen is good as new. The dent on the film is "high"! Thanks to the martin shield.
I know but I mean with stylus or fingers not other things?
Surfer_D said:
I know but I mean with stylus or fingers not other things?
Click to expand...
Click to collapse
Yes I'd also like to know if a screen protector is necessary, assuming yyou don't abuse it.
Also would a cheap one from ebay be any good, and if not why not?
tyronne1126 said:
no edges up..
Click to expand...
Click to collapse
Now how the hell you did that ? :< I re-applied it 150 times and i need to be like super precise on it not to go left or right even for 0.0001mm
hell yeah screen protectors are necessary!
the screen will mark over time with stylus use and of course anything that "accidentally" hits it that is hard will cause marks, and no matter how careful you are, accidents happen
ive got the packaged screen protector on and its not too bad but i have a martin fields one ready to go on instead once the htc one starts to wear
I tried multiple times to apply the protector and was always off by a hair by the time got to the bottom. When I finally got it on straight there was enough dust on under it that I got disgusted and peeled it off again. I didn't give up though and ordered the OEM screen protectors again (two to a pack) and this is how I finally installed it properly:
1. Wash your hands.
2. Wipe the phone screen clean of any dust and fingerprints.
2. Find as dust free an environment that you have.
3. Peel the top edge of the protector only then line up this up with the top of the phone.
4. Slowly apply to the protector to the phone while allowing the backing to peel off. Make sure you don't allow it to totally come off.
5. You will soon know if it's going to lay flat in the slightly recessed area of the phone screen. The protector is exactly the same size as the recessed area and there is no room for error.
6. If not, peel the protector off again while allowing the backing to reseat on the protector but not all the way to the top.
7. Reposition the top edge very slightly and repeat. It will probably take several tries to get it right. It took me about 6 times but it looks very good when done.
The replacement protectors are easier to apply because the backing is the same size as the protector so it's easier to align with the phone.
If you're careful to not touch the adhesive side of the protector and are lucky enough not to have any dust settle on it, the final result is indistinguishable from the unprotected phone surface.
I'm very curious. Does anybody know why HTC doesn't supply the machine with the screen protector already installed?
Does it really help to have a screen protector on STR? My nook is always inside a case, and always have some finger smudges on the screen, which does not interfere with reading the screen content.
Would it make the screen harder to use, such as in a resistive screen? I know it has IR technology, not resistive lcd, but it is good to know...
I have a screen protector, because I have cats and dogs who're lurking around my nook, and I'd hate to see them scratch the screen. I'm not using any case for it. The film does not affect the touch sensitivity in any way...
thanks for the info, emarusceac.
I can see dogs and cats and stuff being a problem. I just have an old NC sleeve laying around that works. If you can stand the wait, ebay is cheap Turns out the NC and NST width is the same...
emarusceac,
what sort of screen protector are you using?
Hi mh127,
I'm using a basic anti-glare screen film from ebay.
The nst is the first touch screen I have not used one on.
It is perfect now, the matte should hide small scratches, it gets used more lightly than phones/tablets, it is light (less damage if dropped), and it is cheap!
I am going to buy one.
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
emarusceac said:
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
Click to expand...
Click to collapse
I ordered one. Was concerned that it would be tough to apply because of the high frame around the screen. Any tips how to apply well? You use a credit card to smooth the film down over the screen?
Oh one more thing. Has anyone tried removing one? Does it change or damage the screen in any way?
I have had several different screen protectors on my NST and none of them caused any damage when I removed them. I would note though that I have read that you must not apply a screen protector to the Glowlight, something about the built in screen protector and its light guide properties. I would also point out the one reason my NST has had multiple screen protectors is because they are so hard to apply without getting bubbles/lint between the screen and the film. The film I have on now I finally got applied without any bubbles/lint in the reading area, so it will hopefully be on there for a while. Make sure you are working in a CLEAN area and take great pains to get it lined up straight before actually applying it to the screen.
The NST doesn't need a screen protector, it really wont do much for the device, but if you really feel like spending the money for it go ahead.
The NSTG already has a protector built in, putting an extra one on would be like putting on an extra pair of latex gloves. It'll offer a little more protection, but it can get to be quite frustrating in terms of lost control. It's advised not to bother with a protector for the NSTG.
Personally unless you know you're going to have your NST in reach of creatures with claws, or lose objects with sharp edges the protective screen will do little for you. Even in those cases it's possible the screen would merely lessen the damage done rather than prevent it out right.
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Xadious said:
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Click to expand...
Click to collapse
They claim there is one, I claim they lie as there is no visible edge of one. If there was you wouldn't get the light flares from minor scratches. Adding one may protect the screen but no idea what it would do to the light guide properties of the screen. If you ever have to remove it I'd worry what would happen to the light guide layer.
Because gadgets capabilities/sppecs increase rapidly & prices drop fast too, unless it's expensive I forget about screen protectors if the device is cheapish (got mine cheap) & if it will be outdated in a couple of years. Specially if it's not an outdoor device like my phone. Or if the protector hampers speed / functionality to some degree. Also personally I rarely scratch tab screens unless it's a phone, my phones/tabs all have protectors put on from day one, but not doing my NTSG. YMMV.
So I've been using my Lumias for a while with a Skinomi screen protector. These are probably the best options for a screen like the one on the Lumia: the curved design makes regular plastic screen protectors (the only ones with a decent look and feel) useless on this phone, you can't even set them up properly; on the other hand, wet application screen protectors suck really bad: they have that orange peel look and feel, they give you that horrible feeling when swiping and look terrible in sunlight, Skinomi is no exception.
This got me thinking. I decided to go without a screen protector on my 400+ € piece of hardware. Am I just a mad man? Not quite (IMHO), here's why: gorilla glass can be scratched, that is for sure, but you're most likely to get only really thin scratches in the coating (given that you're careful), which can be 100% hidden with a wet application screen protector. So why would you go for one in the first place when your screen is still pristine, when you can still actually enjoy it? When you'll have the feeling that it's getting too much scratched you'll still be able to get a protector and have a fresh start.
What do you guys think? Do you still use protectors on your Lumias? Do you enjoy "freedom" instead? Please let me know. Maybe I'm just too OCD and crazy, but this phone and its amazing curved glass is giving me a lot of headaches. How do you deal with it?
vnvman said:
So I've been using my Lumias for a while with a Skinomi screen protector. These are probably the best options for a screen like the one on the Lumia: the curved design makes regular plastic screen protectors (the only ones with a decent look and feel) useless on this phone, you can't even set them up properly; on the other hand, wet application screen protectors suck really bad: they have that orange peel look and feel, they give you that horrible feeling when swiping and look terrible in sunlight, Skinomi is no exception.
This got me thinking. I decided to go without a screen protector on my 400+ € piece of hardware. Am I just a mad man? Not quite (IMHO), here's why: gorilla glass can be scratched, that is for sure, but you're most likely to get only really thin scratches in the coating (given that you're careful), which can be 100% hidden with a wet application screen protector. So why would you go for one in the first place when your screen is still pristine, when you can still actually enjoy it? When you'll have the feeling that it's getting too much scratched you'll still be able to get a protector and have a fresh start.
What do you guys think? Do you still use protectors on your Lumias? Do you enjoy "freedom" instead? Please let me know. Maybe I'm just too OCD and crazy, but this phone and its amazing curved glass is giving me a lot of headaches. How do you deal with it?
Click to expand...
Click to collapse
You're not mad, haha! You're just like me, I have a crap one on mine, I really didn't want to put a screen protector on, usually I'm good with my phones, but strangely, on the first day that I bought the Lumia, I managed to put a faint scratch on it, and that cheesed me off. So I put a half-ass martins on. Which is ok.
I've got a skinomi, and I've yet to put it on, I haven't ever put a wet screen protector on any of my phones, now based on your review, I don't want to. So I'm stuck on whether I should bother with putting one on or just taking it off completely and allowing the thin scratches.
p.s. phone currently at Nokia care centre...
Glad to see I'm not that weird Btw what do you mean by martins, maybe Martin Fields? I saw one of those on Expansys but apparently it doesn't cover the whole screen, so it will probably peel off easily like all of the non wet ones...
i didn't use a screen protector on my lumia - actually i've never used a screen protector before (i just know i'll put it on badly).
i also found the rubber-ish case provided is terrible for keeping your phone clean. somehow dust gets underneath it and just makes the phone look horrible.
Wiggy Fuzz said:
i also found the rubber-ish case provided is terrible for keeping your phone clean. somehow dust gets underneath it and just makes the phone look horrible.
Click to expand...
Click to collapse
Actually I think that the original case gets way less greasy than the phone itself (assuming you have the black one), the white one is a fingerprint magnet, but it's glossy so it's very easy to wipe...I also tried a few tpu cases, but they even make things worse.
The lumia it's a fantastic phone with a fantastic Gorilla Glass and a fantastic polycarbonate unibody, why you need to put something on this phone to protect it ???
look there
frenk_91 said:
The lumia it's a fantastic phone with a fantastic Gorilla Glass and a fantastic polycarbonate unibody, why you need to put something on this phone to protect it ???
look there
Click to expand...
Click to collapse
Maybe because you want it to stay beautiful for longer than a couple months
I've never used screen protector with 3 gorilla glass phones during 2 year time period and not a single scratch.
I've not bothered with a screen protector on mine due to the curves, and the screen is still pristine, although I never keep anything in my pocket with it.
Screen protectors sucks on every phone! I rather take a few scratches than using a protector that takes away all the good feelings from the touch.
In fact I already got a small small scratch. Doesn't bother me as much as a screen protector would though.
I'm using a Zagg screen protector (wet application) on mine. At least it adhered properly around the curved screen. Yes, it does feel different than the naked screen, but that is not necessarily a bad feeling. My $0.02
Well, right now I don't have one on. I have tried every brand, Skinomi, Zagg, Martin Fields and even some cheap one from eBay, but no luck: they either don't stay on at all or look crap with their orange peel effect. Wet ones are even worse: if a grain of dust gets underneath when you install them it gets stuck and you can't take it away by any mean, even washing them doesn't help. I ordered a Gadgetshieldz protector because I heard they're the best ones, but if it doesn't satisfy me I'll keep going naked, I'm sick of this crap, I just wanna enjoy the phone
Don't worry about the scratches guys. It's just the Oleophobic coating.
Anyway to hide those scratches, apply a small amount of clear car wax and wipe it off.
That coating does a great job by the way... my screen gets less finger-printy than previous phones.
Rusty! said:
That coating does a great job by the way... my screen gets less finger-printy than previous phones.
Click to expand...
Click to collapse
Yeah it's actually doing great. When you swipe It feels like you're not even touching the phone, it seems like a gesture more than a touch input. The SGSII I had before had a pretty smooth screen when naked, but it didn't even come close. Maybe the curved glass is helping increasing that feeling too. Day after day the idea of putting on a screen protector on this baby sounds more and more like murder. I guess I'll still be using one of those zagg-like protectors when I go to the seaside tho, sand can still screw up everything. The Gadgetshieldz thing I'm getting will help me through that I guess...
I'm not using a screen protector on my Lumia 800.
When I bought my phone, I wanted to; especially because I had 2 mini scratches on the screen within 24 hours of purchase.
Although it would be nice to have one, it's a bit of a hassle so I decided not to go out of my way to get one. I just try to be careful with my phone and the only cover I am using is the one provided for the body, but I'm even thinking about removing that.
Rare Earth said:
I just try to be careful with my phone and the only cover I am using is the one provided for the body, but I'm even thinking about removing that.
Click to expand...
Click to collapse
I'd like to go completely naked too, but given the form factor of the back I'd probably screw up the camera. As far as I can tell the glass on the Lumia is behaving pretty well, however you're still gonna get a few scratches in the coating in no time, regardless how careful you are. Honestly it doesn't bother me at all tho: the very tiny marks on the coating are only visible under a strong light, looking very closely at the phone which has to be sitting at a very special angle. With a screen protector I would get much bigger and annoying scratches, plus the hideous orange peel effect, which makes the screen really look and feel like garbage. I repeat, I can't murder such a beautiful design that way. I only hope that I won't get BIG scratches, those ones able to create that horrible rainbow effect. This is probably the only thing that would suck even more than a screen protector, but I'm not just careful, I'm literally obsessed with my phone, so it's highly unlikely to happen. Only rubbing sand at full force on the screen should have such consequences...fingers crossed
vnvman said:
I only hope that I won't get BIG scratches, those ones able to create that horrible rainbow effect.
Click to expand...
Click to collapse
I got one of those but it's SMALL. Like 2mm long fairly deep as yo can easily feel it if I want to but its sitting at the edge of the screen on the right side so I never notice it in my daily use. As I said earlier. I rather take those scratches than using a protector as it would bother me more than the scratches I get. Gorilla glass is good but it's no miracle glas by any means.
I managed to drop my brand new phone on the gravel (thank God it's my work phone) and got a really, really bad scratch that really annoyed me so I decided to get a screen protector so I wouldn't make everything worse.
I first ordered a Skinomi and while the fit was pretty decent I screwed up badly when putting it on and I wasn't about to order another one from the US. So I decided to try Copter (Swedish only brand I think?)
While it is originally for the N9 with a cut out in the bottom for the sensor it was in my opinion much, much better. It is a bit smaller then the actual screen but it is so thin, 0,178 mm, that I can barely notice it unless some dust get stuck to the edges.
There is a slight drag when using it compared to no protector but you just have to lighten up your touch and you won't notice. There is no orange peel affect at all and the best thing is that the bad scratch is gone, completely!
I would prefer not having a screen protector at all but since I know I'm clumpsy and will most likely scratch my screen even more I can highly recommend Copter. (If you can get it) In my oppinion it feels and looks ton better then Skinomi. My GF has a Zagg on here phone and in my oppinion that is crap in comparisson, thicker, more drag and an orange peel effect.
Sounds good, thanks for the tip. Anyway I could only find it here http://www.teknikmagasinet.no/db.pl...&title=Copter Displayfilm Nokia N9/Lumia 800&
But actually I don't understand a word so I really don't know wether they ship to my country or not :/
@dannejeanne: ouch, sorry to hear that. How did you manage to put that scratch on it? Did you drop it? If it can scratch that way without a particular reason this kinda sucks...
Attached are the photos of the 6T solid suit and the impact screen protector that I just installed this morning. The solid suit feels amazing and the screen protector is film and feels like glass, but is definitely not glass, just so there is no confusion there. It does seem to go from left edge to right edge completely and where I placed it seems to cover the entire screen top to bottom. The slider on the case really works and the buttons are fantastic; smooth and clicky, not at all hard to press. I love both and I'm glad I got them ordered on Black Friday now because two protectors and a case was not inexpensive but they are both super high quality and way more affordable than the glass one from T-Mobile so I'm happy with my purchase. If you have any questions I'll try my best to answer them!
Also, don't mind the doggo, she likes being in pictures.
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone....
And how's the slider button? Is it flimsy?
lemonspeakers said:
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone.... Nn
And how's the slider button? Is it flimsy?[/QUOTENnnnn n N
The buttons are great, I handed someone else my phone so two people could verify that they are very clicky and easy to push. The slider has some play in it up and down but it does work correctly when it hits the slider on the device. No issues with functionality at all this is a really great case.
Click to expand...
Click to collapse
I tried crashguard on op6 and hated it. I think I'll like the solid suit better. Thanks for the pics. Screen protector is intriguing also, seems very clear....
Thankfully I waited I can get the print backs now. Just waiting or one particular one to be available
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
how slick is the screen protector compared to the pre-applied plastic one from OP?
gregwee said:
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
Click to expand...
Click to collapse
Sorry about the late response I'm traveling abroad. I have the impact screen protector as the tempered glass one is for the back I think. Anyway, as far as not full coverage I think what they mean is that it covers the visible screen but not the edges past that. It doesn't extend fully top to bottom either but it does cover all the visible screen space as far as I can tell; no obvious cutoff of the screen though it does require precise placement to line it up properly.
Frankenscript said:
how slick is the screen protector compared to the pre-applied plastic one from OP?
Click to expand...
Click to collapse
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Can u take better pictures of the screen protector again?
AlkaliV2 said:
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Click to expand...
Click to collapse
The impact resistance shatters? I thought it was some type of plastic film.
https://imgur.com/a/BJD1GmC
I also purchased a SolidSuit (with the lens mount) for my 6T and while I like the build material, I don't like the little details. Let me explain:
1) The back of the case has this weird look and feel like it's made from three separate medium-fiber density board with a black sticker over it. I can actually feel the transitions between the three pieces and I don't like it. See the attached picture.
2) There is a noticeable gap at the top of the phone where the back meets the bumper edge. However, on the bottom, it's completely flush. My pockets are clean, but somehow dust and small particles find its way into that tiny gap. Ugh,
3) The special lens adapter is amazing since I am now able to mount the Moment 18mm WIDE V2 lens. However, since the bayonet mount sits so far away from the camera lens, it creates vignetting. FYI: The OP6T and the OP6 share the same lens adapter. I bought both. They are labeled differently, but they are identical in every way: height, mounting point, etc. If they did this correctly, the adapter for the OP6T should be SHORTER since it does NOT have the same camera height protrusion as the oneplus 6.
https://imgur.com/a/BJD1GmC
zymphad said:
The impact resistance shatters? I thought it was some type of plastic film.
Click to expand...
Click to collapse
It didn't shatter really, it just cracked along a seam where the impact was. When I get back home in two days I'll try to get pictures of the crack and the screen protector.
Ultimate Shield Tempered 9H Glass screen protector
Hey guys, here is my review of the Ultimate Shield Tempered 9H Glass screen protector and I must say - I'm converted!!
Read on....(also see the attached pictures)
Contents:
- The tempered glass screen protector
- Screen cleaning cloth (wet)
- Dust stickers
- Microfiber cloth
Installation:
Be sure to do this in as dust-free environment as possible. I like the kitchen for this reason (no carpets for me there), or the bathroom works great too as you can use the steam from the shower to help any dust settle whilst you complete the install!
1. Using the wet cloth helps to give the screen a good clean removing any oily fingerprints and/or dirt.
2. The dry cloth dries the screen (don't worry, the wet cloth doesn't 'wet' it that much!) and the dust stickers are there to ensure any last little bits of dust aren't present.
You'll want to spend time on ensuring there are no little bits on your screen as this can spoil the look, at least to those who won't be able to stop noticing that little eyelash hair in the middle of the screen!
3. Carefully remove the protective layer of the screen protector, keeping the exposed glass side facing down. There is a slight adhesive, of some form, which any bit of dust/hair ending up there may be tricky to remove so make this step as swift as possible, taking extra care. Keep your thumbs/fingers away from that side of the glass to avoid any fingerprints getting stuck there, holding the protector by the side only.
4. Lower the screen protector towards your phone, but don't place it on quite yet. Really line up the protector, looking at it from directly above and I'd recommend using the camera cut out as the guide. Ensure the selfie-camera lines up nicely in the hole but also that the full length of the protector runs parallel to the phone.
5. Once you're happy with the alignment, place the protector on the screen, with the selfie-cam side down first, then slowly but firmly lowering the rest of the screen protector down. Or to say another way, press the top of the screen protector down and then press towards the lower end of the protector, until you reach the bottom speaker end.
6. Some bubbles may be trapped underneath the screen. Don't worry! Use your finger/thumbs to firmly yet carefully press out the bubbles, pressing it out toward's the edge of the screen. You can also wrap a credit card in the dry cloth, and use that as a way to force out some air bubbles.
If you're not happy with the alignment and/or have anything stuck under there, then it is possible to remove and reapply. Do this very carefully though, by using your nail to lift it up from the corner, taking extra care not to fingerprint that side of the protector. Use the dust sticker to remove any bits. Though again, be as quick as possible as whilst that side of the protector is exposed, more stuff might land there!
Impressions:
From being a long time user of the film screen protectors, those being 'wet installed' etc. I must say I have been converted! I did have my hesitations about using glass protection, as a while back I used one and it failed to impress me. Previously I had found this type of material, glass vs plastic film, would add a mirror-like reflection to the screen, even more so than the Gorilla Glass screen that the device already had. Also, with my love of AMOLED devices I found glass screen protectors would detract from the 'deep black' the screen would display, and make such colours more of a grey, which affected viewing pleasure.
But not with this one!!
Feel - I instantly fell in love with how this looked and felt. It has no loss of sensitivity and I have not felt the need to have to swipe harder or change the way I interact with the phone. It feels just as responsive as it did prior to installation!
Looks - There is no glare/mirroring effect and so as far as it's looks are concerned, it's practically invisible! The screen colours look as vibrant as they did before and blacks still look as deep as they did
Fit - As you can see I have this installed with this rugged case and it fits PERFECTLY. This case slightly lips over and so there is no dust being trapped around the edge of the screen protector. I'd presume it will also be compatible with other cases too, as it is full coverage, going right to the edges with it's own bezel, not just covering the screen.
I highly recommend the use of this screen protector, for the added peace of mind that the screen is further protected against scratches etc.
Any questions please do ask!
@cd993 thanks for the nice review. I also normally don't like the complete glas, but bought a similar one. I'm also quite happy with it except one thing which disturbs me a little bit. Mine has the black frame around it ( which is in itself not a problem) and this is taking away just a tiny bit from the screen (maybe half a millimeter on the left and right). Is it the same with your one ( from the pics it looks like it also has the black frame). That it take away a bit of the screen is only noticeable when using apps which really starting text completely on the left side ( like the netguard log for example )
Sent from my OnePlus 5T using XDA Labs
tbv2005 said:
@cd993 thanks for the nice review. I also normally don't like the complete glas, but bought a similar one. I'm also quite happy with it except one thing which disturbs me a little bit. Mine has the black frame around it ( which is in itself not a problem) and this is taking away just a tiny bit from the screen (maybe half a millimeter on the left and right). Is it the same with your one ( from the pics it looks like it also has the black frame). That it take away a bit of the screen is only noticeable when using apps which really starting text completely on the left side ( like the netguard log for example )
Click to expand...
Click to collapse
Thanks! To be honest I don't think it does. I've just looked at various apps, such as matlog/play store etc and no noticeable screen cut off
cd993 said:
Thanks! To be honest I don't think it does. I've just looked at various apps, such as matlog/play store etc and no noticeable screen cut off
Click to expand...
Click to collapse
Thanks, I maybe give that one a try then . Just to make clear for everybody. The app in the pic I attached in my former screenshot really starts at pixel 0 on the left side... It's really not a lot what's missing....
tbv2005 said:
Thanks, I maybe give that one a try then . Just to make clear for everybody. The app in the pic I attached in my former screenshot really starts at pixel 0 on the left side... It's really not a lot what's missing....
Click to expand...
Click to collapse
Do so, you'll like it!
thanks
Thanks for the review mate!! I've used US's products before and I think they're the best screen protector I've ever used.
Ordered mine 2 days ago and can't wait for it to be delivered, I miss the sensitivity and feel that those usually have.
rvstico said:
Thanks for the review mate!! I've used US's products before and I think they're the best screen protector I've ever used.
Ordered mine 2 days ago and can't wait for it to be delivered, I miss the sensitivity and feel that those usually have.
Click to expand...
Click to collapse
Enjoy!
Would love to get one but ... it seems they don't ship to Mexico and that's a shame :c .-.....
PriPhaze said:
Would love to get one but ... it seems they don't ship to Mexico and that's a shame :c .-.....
Click to expand...
Click to collapse
Email them, perhaps they'd be willing to...
I have applied this protector too....
Always had phones without screenprotector because I hate them... It takes away the feel of the phone... Bubbels underneath glass etc etc.
Bought it because I saw some scratches on the screen coming.
So after this positive review gave it a try. But man I must say it's a great quality.
Applying is very easy off course look for dust... Becaue I had one.... Took it off which is very easy to do... Rinsed it off under water....
Take two was a succes.... Didn't dry it just putt it on the phone and wipe wipe wipe and a lot of patience....and rubbing. It was bubble free.
But glad I did it.... In fact I find the screen better looking.. Bit of 3d effect...
Fp and typing is as normal.
Only con its a bit heavy....
Don't compare this to a 5 dollar screenprotector which is also the reason why I hated them.
*justintime* said:
I have applied this protector too....
Always had phones without screenprotector because I hate them... It takes away the feel of the phone... Bubbels underneath glass etc etc.
Bought it because I saw some scratches on the screen coming.
So after this positive review gave it a try. But man I must say it's a great quality.
Applying is very easy off course look for dust... Becaue I had one.... Took it off which is very easy to do... Rinsed it off under water....
Take two was a succes.... Didn't dry it just putt it on the phone and wipe wipe wipe andota of patience....
But glad I did it.... In fact I find the screen better looking.. Bit of 3d effect...
Fp and typing is as normal.
Only con its a bit heavy....
Click to expand...
Click to collapse
Glad you like it! Yeah it really is a great screen protector, basically looks the exact same with it on and barely noticeable!
tbv2005 said:
@cd993 thanks for the nice review. I also normally don't like the complete glas, but bought a similar one. I'm also quite happy with it except one thing which disturbs me a little bit. Mine has the black frame around it ( which is in itself not a problem) and this is taking away just a tiny bit from the screen (maybe half a millimeter on the left and right). Is it the same with your one ( from the pics it looks like it also has the black frame). That it take away a bit of the screen is only noticeable when using apps which really starting text completely on the left side ( like the netguard log for example )
Sent from my OnePlus 5T using XDA Labs
Click to expand...
Click to collapse
Is your screen protector from spigen?
thanks.
I'm using a chinese version but have some issues. The protector have some kind of bend and it causes a bubble impossible to remove just in the front camera. Because of that my front cam don't focus right.
That's the one:
https://www.aliexpress.com/item/32982692897.html
@cd993 from the pictures you attached it seems the screen protector has real curved edges. Am I right or is just my impression? If you could add more pictures where we can see how curved are the edges without the case, I would appreciate.
I'm looking for a good screen protector that has curved edges so I can use a slim cover.
Currently I have a Cafele full screen protector (bought on AliExpress for 4 USD), which is good and has a nice feeling, looks very similar to this one, but it doesn't have curved edges and because of that it doesn't stick very well in the corners, if I use a slim case.
Thanks.
silmarx said:
@cd993 from the pictures you attached it seems the screen protector has real curved edges. Am I right or is just my impression? If you could add more pictures where we can see how curved are the edges without the case, I would appreciate.
I'm looking for a good screen protector that has curved edges so I can use a slim cover.
Currently I have a Cafele full screen protector (bought on AliExpress for 4 USD), which is good and has a nice feeling, looks very similar to this one, but it doesn't have curved edges and because of that it doesn't stick very well in the corners, if I use a slim case.
Thanks.
Click to expand...
Click to collapse
Apologies, I no longer have this phone!
cd993 said:
Apologies, I no longer have this phone!
Click to expand...
Click to collapse
But can you tell me if you recall if the edges were really curved?
silmarx said:
But can you tell me if you recall if the edges were really curved?
Click to expand...
Click to collapse
Hmm I remember then being curved yes, but no overly so.
Either way I certainly recommend it and fitted it great, as well as being case friendly, in my experience
cd993 said:
Apologies, I no longer have this phone!
Click to expand...
Click to collapse
Hey what's that?? What do you have now?
*justintime* said:
Hey what's that?? What do you have now?
Click to expand...
Click to collapse
Ha! I went for the Oneplus 7 Pro
cd993 said:
Ha! I went for the Oneplus 7 Pro
Click to expand...
Click to collapse
Ghehehe good luck with it. [emoji106]