HTC Iolite - 1.09.401.3 - WWE (Europe) without HardSPL - Touch Cruise 2 ROM Development

PLEASE ADVICE !!!
I have a question to advanced lolite users:
I have German ROM on my xda Guide (lolite).
Can I replace this rom by "HTC Iolite - 1.09.401.3 - WWE (Europe)" provided by udk without HardSPL?
Can I just connect my phone via Windows Mobile Device Center and run "RUU_Iolite_HTC_Europe_1.09.401.3_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe" ROM provided by udk without installing Hard SPL first?
Anyone tried this soulution?
Please advice!
Many thanks in advance for the answer!

Can anyone reply??? please....

roodiii: You should try by yourself. If it is not possible, you will get an error message in the beginning.

Related

O2 Germany (Xda star) Rebuilt Shipping Rom

Hey Guys,
i rebuilt the german Rom using the NetrunnerAT Niki Kitchen mixed with Kaiser Rebuilt Kitchen. It flashes just the OS Part. No Bootloader and no Splashscreen.
It's Just for Backup Purposes
I initial flashing procedure with SSPL of jockyw2001 on phone side and CustomRUU from Niki Project Rom (I think it's this one) on PC side.
Baserom used was Niki Project Rom 1.0. I was able to get back from Niki Project Rom to the German Shipping Rom.
I recommend everybody, who want to try this rom to install HardSPL.
Everything you do is on your own risk.
but have fun!
Download: http://rapidshare.com/files/89362816/o2_germany_shipping_rom_0407.rar.html
so now i'll throw the crap out of this rom.
Great News, thx therealholg.
Greets Tobse
yes, thanks a lot !! it is good to know that you have a factory ger rom in place !!
good work and thanks for sharing
Greate thanks for your work and sharing the ROM
O2??
sorry why is it called 02? is it 02 branded or does it work only with a O2 sim?
just o2 branded ... xda star doesn't have a simlock ... but it's not stored in the os part anyway

German Firmware for HTC Touch dual *nike*

Hello,
maybe someone can help. I need to change the language of a new HTC TOUCH DUAL NIKE from Italian to German. I tried already with a RUU firmware but it seems to old. Do someone have a new firmware in German ?
Thks in advance.
Roland
http://forum.xda-developers.com/showthread.php?t=384924
MCS
Hi,
thks for the advice.
I downloaded WM6.1 GER Niki netDrg BR but it does not work. There comes always error 262 (update error).
The actual version is:
ROM: 1.31.408.09 dated 30/10/07
RADIO: 1.58.16.27
PROTOCOL: 25.61.30.03H
EXTROM: 1.31.408.8601
Maybe you can help me further.
bye
roland
Unzip the *.exe and try again!
Flash without Sim and SD Card.
MCS
Hello,
thks, but the same problem. On the phone's display it writes 0% and then the error comes. Phone is still ok but firmware does not match on this phone.
maybe you find a solution.
thks
roland
Read the Threads ... without HardSPL you cant Flash a Cocked Rom. If you are sure, you have a HTC Niki and not a HTC Neon??? If you dont know this ... read wiki!
Hi,
it's a HTC TOUCH DUAL 5520 ITA. Should by Nike ?
How is USPL or Hard-SPL done ? From the link you postetd I could not understand.
bye
Roland
So what's unclear? In this thread it's all desribed perfectly in my case!
SoftSPL, USPL and HardSPL for Nike
Hi,
perfekt! With the new bootloader it flashed immediately.
Many Thks.
roland

how to upload wwe rom to softbank herm200 (X01HT), urgent help pls..

dear friends,
I have a HTC with japanese language. and I wnat to upload a wwe rom.because the rom is japanese. I downloaded upgrading rom RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10 _108_Ship.exe
but can not upload it, allways geting error [294], pls I need urgent to converet this device into wwe rom. any help just urgent need.
regards
phone info:
HTC HERM200 (X01HT) SOFTBANK
ROM 1.33.761.9
DATE 07/05/07
RATIO 1.46.00.10
IPL-1.01
SPL-2.03
I played with it but now in bootloader mode SPL shows 1.11
I can not do hard-SPL too at all
You needed to do some reading about the softbank, these are a major problem to unlock and upgrade depending on what version you have. In all likelyhood you have bricked your Hermes.
Do some research to see but most people don't like to give advice on the softbanks as no one likes to be responsible for the death of another persons Hermes....
I already read all the forum but could not find any solution, many document and post read about softbank, but never could upload WWE rom
hope someone will explain a proper way..
regards..

Russian ROM needed.

Hello everybody!
Does anyone have russian ROM for Iolite? And HardSPL to switch from WWE to Russian?
Thanks in advance!
I found Russian ROM myself. So, if needed - you're free to ask me.
I'm still expecting my device to arrive. It has WWE ROM.
I wonder, what are my chances to flash Russian ROM succesfully? I suspect I will need proper HardSPL to flash? Or I am wrong? I need advice.
hi!! i need russian oem from iolite! can you help me?
I've sent you link via private message. Enjoy! But if you now have other Language on your Iolite, you might not be able to flash Russian ROM without HardSPL.
HardSPL for Iolite is expected...
I have Lolite(SKU,HTC,English-WWE,GENERIC,E.EU,Regional ID Low) but with russian firmware. How can i find HArdSPL in my Device? Or it doesn't have it?
http://rapidshare.com/files/2156878....2_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe
amplifure said:
I've sent you link via private message. Enjoy! But if you now have other Language on your Iolite, you might not be able to flash Russian ROM without HardSPL.
HardSPL for Iolite is expected...
Click to expand...
Click to collapse
Can you send me a link to?

upgrade from WM6.0 to WM6.1

hi guys
Can anyone tell me how I can upgrade my HERM200 TyTn from WM6.0 to WM6.1 and send me the necessary link. Sorry, I'm new in here and it might be a repeated question but I couldn't find the answer
km121 said:
hi guys
Can anyone tell me how I can upgrade my HERM200 TyTn from WM6.0 to WM6.1 and send me the necessary link. Sorry, I'm new in here and it might be a repeated question but I couldn't find the answer
Click to expand...
Click to collapse
Hi.
Generally you can flash with any herm100 rom. previously you must back up yours buttons driver and after flashed. just install or restore these drivers.
So you must look for Hermes ROM.
Just look for the WM 6.1 version you like. And look for the RRU Wrapper for the rom and install it.. Visit the link below, it may help..
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners

Categories

Resources