Hi guys
I've been looking at these folks from some time now, and they seem to have made 6.5 ROMs that work - Clicky!
But I have no idea how to download the roms, neither how to apply them to the lobby one - any help @ that will be appreciated
And by the way - that forum is doing some pretty good stuff about the monet, it'd be nice if we could post the most essential stuff from there (with permission of coruse)
Thanks for the attention
cant login? pity theres an unlock tool
I've downloaded the latest 6.5 rom from htc365 and can confirm that it works in English with no obvious problems.
Can you upload it somewhere - rapidshare/other sharing server and make a little guide how to do the operation
I think it'd be highly appreciated here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First install USPL by following the instructions in this post.
Then extract one of the zip files below and run ROMUpdateUtility.
When first installed, the language will be set to Chinese. To change to English, move to the settings icon (cog) and press the right soft-button. Then press 0, then 2, then right to select 'US English' and finally the left soft-button to save. You'll need to restart the phone to apply the setting.
The clean version does not include the DAB radio software whereas the integrated version has it in Chinese. To get the radio app I copied the 'TTP' folder within 'Program Files' on my wm5 lobster over to wm6.5 and it runs fine. See below for download.
I have only tried the 'Clean' version of the rom.
Monet 6.5 ROM - clean version
Monet 6.5 ROM - integrated version
Monet 6.5 ROM - other version
DAB Radio UK version
Issues so far:
Settings icon on home screen has some Chinese text
Activsync fails to synchronise contacts
Calender display shows months text incorrectly
awesome i hope this works better than the last one i was forced to go back to wm5
(note to self.. back up numbers this time.. back up numbers)
I should point out that the 'incorrect calendar display' issue was merely my incompetence - by default it displays Lunar months, but this can easily be switched off.
I still haven't managed to get activesync to synchronise contacts but pim backup worked well enough.
The time taken to start windows is a little annoying, there seem to be 3 or 4 different splash screens now.
just wondering, where is the T9 settings? and if there isnt any T9.. why?
How did you revert to the original wm5?
That's the only thing stopping me from flashing that 6.5
when i got the 6.1 rom i got the wm5 rom with it, flashed it the same way as i did wm6.1 and wm6.5
i still miss the T9 tho
Can you upload the original wm5 somewhere, just in case something goes wrong when migrating to 6.5
prodigyfied said:
Can you upload the original wm5 somewhere, just in case something goes wrong when migrating to 6.5
Click to expand...
Click to collapse
i'm sure i got it on this site thru the wm6 page in this section.. check there and get back to me.
kajdljdsfkljdslkjkldfd
Monet 6.5 ROM - clean version is not working. im updating my Lobster TV700 but in the mid of installation its show file is currept,
plz help me this regards
my email is
[email protected]
Monet 6.5
thanks for this one 'coz my monet is now running windows 6.5.. i just followed all the instructions and flashed the monet 6.5 clean version.. my monet now looks cool again.. ^_^
now running windows 6.5.. i just followed all the instructions and flashed the monet 6.5 clean version.. really easy to do, including changing from Chinese. I have copied the DAB files to phone program files & created a shortcut to start menu, only question is, is it possible to link to TV button on the side of phone? Many thanks for a superb rom
Many thanks spasmj, I also updated to the clean version and it gives my Lobster a whole new lease of life.
I was hoping to get a newer version of TomTom on it was well - but I gave up and went back to V5.2 (newer versions seem to want a have touch/stylus driven initially - but followed some advise about a particular V7 that is supposed to support keypad - but it wouldn't install).
Also a good tip to get rid of the Chinese on the front screen on Settings is to move to another home screen (I went to Sliding Panel Full).
Also anyone know who to get rid of the Chinese Mail account, I have added my Gmail but can't delete the Chinese one - minor annoyance.
Cheers
vo1968 said:
now running windows 6.5.. i just followed all the instructions and flashed the monet 6.5 clean version.. really easy to do, including changing from Chinese. I have copied the DAB files to phone program files & created a shortcut to start menu, only question is, is it possible to link to TV button on the side of phone? Many thanks for a superb rom
Click to expand...
Click to collapse
I'm not sure how you'd do that. I don't know how the tv button works in the original wm5 rom. Does anyone know?
I imagine writing a small program to run in the background and wait for that button press wouldn't be too hard.
Would AE Button Plus work on it?
grayme said:
Would AE Button Plus work on it?
Click to expand...
Click to collapse
Yes AE Button Plus does the trick, thanks for the tip.
But ques for spasmj - (after updating to 6.5 rom - cheers) I copied the TTP folder to program files on the lobster but when launching the app (DABplayer or DABlauncher) I get nothing - I click to do a scan and nothing on the DAB radio - not even a failure to scan - it just sits there. It does create the TV and Radio folder. Do you have to have your original Virgin sim in? I have unlocked mine so now on o2. My original sim I got with the lobster was never used so I presume it was disabled as it doesn't work - but tried another Virgin PAYG sim and nothing on DAB radio.
After quitting I also seem to have a TV & Radio.Ink shortcut in the recent programs that fails?
Cheers
Related
Updated 1-2-2006 22:25
Although I planned this almost a year ago, I finally migrated succesfully to WM2003SE. I decided to go for the only 'official' version: 2.20.07 as the main OS. Offcourse I used the WWE translated version by mamaich and buzz_lightyear.
The Ext_ROM is quite generic but does contain T-Mobile NL specific GPRS settings. There is NO T-Mobile skinning! And I love my self-made HTC Himalaya splash-screens 8)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The operator ID of the files is TMOBILE (remember to change that when your device is non-T-Mobile via ie. ER2003Edit )
Info:
OS 2.20.07CHS (translated to WWE)
Radio 1.18
Ext 2.20.904 (also includes WWE help-files)
Extra info:
There are occasional places where you will notice names in 'strange'characters (mainly square boxes). These are places where de translation was not possible / done.:
- Some folder names: Seems possible to delete these
- Network settings: You can rename them (but not delete)
Some files in My Documents (ie IA Caller ID Pictures and templates) are stored with system/hidden/etc properties that prevent Activesync to sync these files. Use (the enclosed CE Total Commander) to unchek all properties changeable to prevent this behaviour
(included links as upload in thread did not work, use cut&paste to download!)
Extended ROM only:
ftp://xda:[email protected]/Uploads/Himalaya_WM2003SE_2.20.904_TMO_WWE_ExtROM_only.rar
Full package:
ftp://xda:[email protected]/Uploads/Himalaya_WM2003SE_2.20.904_TMO_WWE_Upgrade_package.rar
Splash files only:
ftp://xda:[email protected]/Uploads/2.20.904 Splash/
the forum mess up your ftp url's or at least it does in firefox
but copy paste and remove a space fixed it
Another coool WM2003se release
Thnx I'll give it a bash
fixed the links.
Is there anyway to bypass the country ID error? When i try upgrading using your ROM, i always encounter this problem. Any advice is greatly appreciated.
Thanks edsub for the beautiful splash screen.
I updated the diamond version to this one. Problem was to keep al my installed programs intact, but using sprite backup and manually copying the storage everything was back as it used to be. The interesting point is, that the PDA gives the extended rom from diamond as being installed while the new ones are seen in the remove program utility :shock:
Neither can I find the help files other than in chinese (that means blocks on the screen) so it isn't quiet complete yet. As far as I can see the OS is more stable and a fractional faster. Any help to complete the make over :wink:
Next: after a cold reboot there seems to be no ext.rom installed at all (as far as the program tells), only after a restore it's back. Does it has anything to do with PersaveBackup?
This morning I migrated to WM2003se, I bypassed the Country ID following the procedure written by dcs.
All seems ok but I have noticed isn't anymore installed "Graffiti" that I usually use to write. Anyone knows where I can dowmload the program ?
Thanks
After some experiments I went back to the Diamond ROM because I had trouble with the phonesignal: no ringtones. And the pda hesitated a lot during routeplanner, problems with the mediaplayer, problems with the Ext. rom. I guess everything is to solve but it costs me a lot of time and most of all: I mist several phonecalls because i didn't hear the ring.
@henk-jan strange. there IS a ext rom in the package (ms_.nbf) should work as normal. one possibility: did you have the extrom unlocked when resetted the device? as the files are not readonly they are then deleted after 1st use.
ringtones & help are installed from extrom, so again same reason. as is performance while navigating.
I now have my wizard but 2.20 was way better than diamond
@Ed: I know there is a Ext.rom and it is shown in the explorer, but the device info doesn't show the Ext rom version :shock:
Going back to the diamond rom the same happens so it must be a problem in my Qtek2020.
Why do you consider V 2.20 (chinees) better then 2.06 (diamond)
Diamond was based of the 2.06 test ROM.
It was relatively stable, but also slow. And BT did not always work as expected (there was a patch for the hide&seek bt icon issue however)
2.20.07 is much faster, has all the BT support you need and has WMP10
But I must admit its also a matter of taste: I switched over when I had performance issues with 2.06. But those issues were there in 2.20 also (fixed by setting up cache for filesystem and the vulome priority hack)
About your ExtROM: The versio number is set by one of the cabs. In y rom that was the cab with the version number 2.20.904 in the name.
I cant imaging that did not run, but after all: all the issues you name can be caused by not installing from ExtROM in the first place.
I think the start program in the ext rom doesn't run. It is installed on the pda, but didn't run I guess.
Perhaps 2.06 is a bit slower but e registry hack and a speeding up utility solves that, but most of all: it works as it has to. I didn't get that with 2.20
So I take it for adventage. Thanks for your help.
Problem solved: playing with WM 5 and installing the DOC tool from Buzz_lighyear I changed the Ext rom and storage memory. Putting it back to the original state everything is OK now and the 2.20 is running smoothly on my PDA. Only frustrating to re-install all the programs one by one because sprite restores also the problems back.
This ROM is French ??
Hello to all,
I begin in the field of the ROMs and I would have some questions.
- Is this new ROM in Frenchwoman?
- Later upgrade of the ROM, I may restore an ancient(former) protection since Active Sync?
Thank you in advance...
i just updated, but my transcriber letter recognition has vanished and fonts in menu are too big and nun-smooth.
smoothing and changing size doesn't work
help!
thanx
LINK NOT WORKING
Can some one post the links again as i cannot seem to download the file. I'm getting the following message:
ISA Server: extended error message :
200 Switching to Binary mode.
200 PORT command successful. Consider using PASV.
550 Failed to open file.
Can anyone help me
Sak_ said:
i just updated, but my transcriber letter recognition has vanished and fonts in menu are too big and nun-smooth.
smoothing and changing size doesn't work
help!
thanx
Click to expand...
Click to collapse
i also have same problem, input only keyboard and intellipad, the other which are there in 2.06 are missing.
Anybody can help?
transciber and stuff are simply not there, simply because it is a CHT rom that is translated.
The fonts improve when using cleartype.
rom 2.20.07
I m in same boat as some of u
Have anyone found the solutions to get other imput options?
In my case I only had keyboard working...
for a few months after flashing my hmalaya with rom 2.20 the imput options is left with only keyboard.
Letter recognizer is missing and the othe imput programs eg word logic, resco keyboard,calligrapher cannot be activated after installation
Any solutions?????
what must I do to be able to use the other imput methods?????
Or is it that for himalaya rom2.20 keyboard shall remain as the only imput method and no other methods of imput can be used????? If so can someone pls. tell us so that we who r in the dark will ask no more until a day a genius samaritan come along n show us another way again
Many thanks in advance
[size=+2]Charmer WM6 TouchFLO[/size]
As promised. Charmer WM6 rom with TouchFLO and TouchCube with 4mb PP. Used Gullum's Touch v6 rom and modified it http://forum.xda-developers.com/showthread.php?t=323013 Added new welcome logo and ext_rom customization screen as well. SD card is also working now. The funniest thing is that I don't even have a charmer myself
You probably remember this but I am going to say it anyways so... You need at least bootloader ver. 2.xx to flash this rom.
Please, flash back to WM5 first if you have a WM6 rom on your device.
[size=+1]Interface VIDEO! (thanks adexxx):[/size]
http://youtube.com/watch?v=zQBOespJRfU
Flashing instructions:
If you already have a WM6 rom, flash back to WM5: http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe
Extract Charmer Touch.rar. Remeber to turn off your GSM module and make sure you have Active Sync connection. Run Upgrade_ROM.bat. When the screen goes green and the flashing is finished make a HARD RESET!. Press Camera and Voice Dail buttons (hold them). Put and hold the stylus in reset button for 2 seconds. Release it. Wait until you see some white fonts on black screen. Then release those 2 buttons. Push the green dial button.
Do not interrupt the cab install after the first boot.
[size=+1]Useful additional applications:[/size]
http://forum.xda-developers.com/showthread.php?t=344419
Contact Manager and keyboard by tene:
Great app, I'm not legally qualified to put this in the rom, so I'm pointing you to the website:
http://pocketcm.com/dl.php
Touch Cube:
To activate Touch Cube, drag your finger from the top bar straight to the very bottom. This works in not only on today, you can use it whenever you want. To exit the cube, slide your finger up.
Credits:
- gullum - amazingly big thanks for the base rom
- jdac21, adexxx - for being betatesters
- bepe, mamaich, tadzio, and others - for development tools
- nocturne.op.15 - for last night ;P
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changes in 2.1 ver.:
- charmer customizations
- added Bluetooth Explorer
- new keyboard driver
- minor registry fixes
[size=+1]Download links ver. 2.1:[/size]
PRIMARY: http://rapidshare.com/files/55896743/Charmer_Touch_ver._2.1.rar
MIRROR: http://www.2shared.com/file/2182671/d199a402/Charmer_Touch_ver_21.html (thanks jdac21)
old ver. 2.0 - http://rapidshare.com/files/50122451/Charmer_Touch.rar.html
New Splash Screens:
Just download this file:
http://www.2shared.com/file/2194430/d97df392/splash_update.html
http://rapidshare.com/files/63336023/splash_update.rar
Unpack it and run RUU_GO.exe. Follow the instructions. This wont make a hard reset of your phone. Enjoy.
greatest rom ever for charmer
What kitchen did you use do cook this ROM & can you share kitchen for this ROM or only SYS&OEM folders?
I haven't used a kitchen.
You dumped NBD rom for files and run pkgtool to create SYS&OEM folders?
I didn't have to do that. All I needed to do was to modify the registry, initflashfiles and .dll libraries. Plus some minor tweaks.
How can I run touch Cube?
There's supposed to be an icon on today screen between the two softkeys.
I make a hardreset and installed extrom and cube is working.
vlodeck said:
There's supposed to be an icon on today screen between the two softkeys.
Click to expand...
Click to collapse
Well.. I don't have a Icon here on my Today Screen.
Installed your Image as described. Clean Install AKU 3.3 -> 6.6.666.
Customizing done. Still no Icon
And...
One Issue I found in Touch FLO WM6 with working cube (gullum prophet rom flashing to charmer) by Anja31 and yours:
Backlight Setting with that HTC Tool doesn't work. gullum's release freezes and your ROM just doesnt do anything when clicking that Icon in QuickLaunch.
user989 said:
Well.. I don't have a Icon here on my Today Screen.
Installed your Image as described. Clean Install AKU 3.3 -> 6.6.666.
Customizing done. Still no Icon
And...
One Issue I found in Touch FLO WM6 with working cube (gullum prophet rom flashing to charmer) by Anja31 and yours:
Backlight Setting with that HTC Tool doesn't work. gullum's release freezes and your ROM just doesnt do anything when clicking that Icon in QuickLaunch.
Click to expand...
Click to collapse
Have you soft resetted your device after the customization?
I also don't have the icon... the TouchFLO sometimes starts when i press the middle part, but not always, which is weird
I've made a hard reset, then a soft one, still nothing.
Adjust backlight also doesn't work.
Otherwise, it's a great ROM, pretty fast
"the TouchFLO sometimes starts when i press the middle part,"
Thats it, that's the icon between two softkeys. If you don't like it, you can always use the softkey to activate touchflo.
Storage Card Trouble
Very nice rom
Just seem to be having one problem.
My storage card is not recognised most of the time. It has been fine on all other roms.
Any ideas?
thanks
pjam: I havent had the time to check it. SD card had been confirmed working.
Please check this:
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
"DisablePowerManagement"=dword:1 =====> CHANGE IT TO "0"
SD Card Reader Error
pjam said:
Very nice rom
Just seem to be having one problem.
My storage card is not recognised most of the time. It has been fine on all other roms.
Any ideas?
thanks
Click to expand...
Click to collapse
pjam - I'm having the same problem to. If you find the answer to fix the bug let us know.
Thanks.
Ulymanchild
------------
MDA C 2
ROM V: 6.6.6.666 WWE(thnx 2 Vlodeck)
Radio V 02.19.21
Protocol V: 4.1.13.09
vlodeck said:
pjam: I havent had the time to check it. SD card had been confirmed working.
Please check this:
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
"DisablePowerManagement"=dword:1 =====> CHANGE IT TO "0"
Click to expand...
Click to collapse
Ok, it was set to 1 but with it set to 0 i still have the problem.
I have restarted my phone (power off not soft reset) checked the registry is still set to 0.
Any other ideas? Is it worth me detailing all the other reg values under that key?
thanks
I have those values on my comp, i can edit them. I'm gonna look through this stuff tomorrow.
vlodeck said:
I have those values on my comp, i can edit them. I'm gonna look through this stuff tomorrow.
Click to expand...
Click to collapse
Ok, I'll keep looking for any generic wm6 fixes but failing that hopefully you'll come up with a solution.
thanks
pjam
For ref: The battery fix cab appears to be required still. (active sync charging)
I found this on a MS site, don't know is its relevant but its certainly missing form the registry. I would have tried it myself but wasn't sure where to input the last part. (PMCLASS_BLOCK_DEVICE)
http://msdn2.microsoft.com/en-us/library/aa910085.aspx
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDMemory]
"Dll"="SDMemory.dll"
"Prefix"="DSK"
"Profile"="SDMemory"
"IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}",
"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}" ; PMCLASS_BLOCK_DEVICE
pjam
iProphet lives again!
This time with:
A new launcher (iLaunch) coded by me.
ArcSoft MMS 5.something (the latest one from the Diamond, the build it reports is different to the one in the OEM/MASD)
iContact (thanks to supbro)
WeatherWatcher
MoDaCo AppToDate
S2P
S2U2
S2V (Thanks to A_C, see here, here, and here.
Skinning on virtually everything!
.Net CF 3.5
iPhone Dialer Skin (thanks to DxC)
UC Compatable
Some other things!
OLDl3v5y_Prophet_Future_20270_iProphet.zip - 43.71 Mb
New!l3v5y_Prophet_Future_20270_iProphet_Fixed.zip - 43.93 Mb
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes:
On the first startup, S2U2 may say it can't launch. Restart to get everything working.
Thanks to:
Everyone whose software I have used
Inteks for neokit.
Everyones tools!
The Prophet forums for your bug reports on the older versions of iProphet.
Have fun, and don't forget to Hard/Soft SPL (ProphetToolsLight is included for this).
guess im the first one here, gonna download and flash now. Thank you L3v5y
The Keypad is not correct mapped on my phone.
cool....
good work l3v5y.
looking forward to the fixed version..
gREAT AND SURPRISE JOB~~~ thx l3v5y
derhensch said:
The Keypad is not correct mapped on my phone.
Click to expand...
Click to collapse
It what way?
It works fine for me!
Just finishing off the tweaks (including GMM, and S2V which has an update!).
BTW, run AppToDate soon after your first startup, to make sure everything is up to date!
going to give this a try
thank you!
Problems installing
Great job, l3v5y.
To my taste, best and easiest ROM to use in iPhone style.
Unfortunately, I had problems flashing your iProphet v3.6, and it happens the same now. After flashing process, my S200 got stack on Clownfish image and no bottom worked, so I had to take the battery off. On HR it customizated instaling several cabs (s2v, s2u2, s2p, wwm107, icontact, battery status and opera9). I installed gmm and 2sv fix cabs and run AppToDate.
After that I have same error messages when starting: "The files dciNbar, iLock2, LAUNCHER and starkey cannot be opened..." and many applications dont work (appart from some broken links), almost all Tools.
I hope it could be fixed .
Some notes, just ideas:
1- I missed Thumbcal (launched from iLauncher) and varanusvincents iPhone (ish) styled shelres.96.dll.
2- You downgrade Opera cab from v9.5 in iProphet3.6 to v9.
3- I use PCM keyboard0.14 (iPhone style) and any hibernate application to save program memory.
4- Other icon for AppTpDate, for example the original with gears in grey.
pablortg said:
Great job, l3v5y.
To my taste, best and easiest ROM to use in iPhone style.
Unfortunately, I had problems flashing your iProphet v3.6, and it happens the same now. After flashing process, my S200 got stack on Clownfish image and no bottom worked, so I had to take the battery off. On HR it customizated instaling several cabs (s2v, s2u2, s2p, wwm107, icontact, battery status and opera9). I installed gmm and 2sv fix cabs and run AppToDate.
After that I have same error messages when starting: "The files dciNbar, iLock2, LAUNCHER and starkey cannot be opened..." and many applications dont work (appart from some broken links), almost all Tools.
I hope it could be fixed .
Some notes, just ideas:
1- I missed Thumbcal (launched from iLauncher) and varanusvincents iPhone (ish) styled shelres.96.dll.
2- You downgrade Opera cab from v9.5 in iProphet3.6 to v9.
3- I use PCM keyboard0.14 (iPhone style) and any hibernate application to save program memory.
4- Other icon for AppTpDate, for example the original with gears in grey.
Click to expand...
Click to collapse
1. Please wait a WHILE FOR THE " FISH " PAGE TO STAY, if it is really a halt,
2. just pick the bottom reset button, and then will work normally.
3. that usually caused by mis-pointed shortcuts, corrupted files in Extended_rom or a bad flash.
So, you may need to reflash, too.
1- I missed Thumbcal (launched from iLauncher) and varanusvincents iPhone (ish) styled shelres.96.dll.
2- You downgrade Opera cab from v9.5 in iProphet3.6 to v9.
3- I use PCM keyboard0.14 (iPhone style) and any hibernate application to save program memory.
4- Other icon for AppTpDate, for example the original with gears in grey.
Click to expand...
Click to collapse
ThumbCal has gone comercial, although I may be able to use the free version.
I can add in PCM Keyboard.
I can use the other Shellres.96.dll file.
I haven't included Opera, as it takes up lots of space, and the latest beta build disables notifications!
I can update the AppToDate icon!
If you want to configure what is launched by the launcher, you'll need to go into the registry.
Under HKCU\Software\l3v5y\iLaunch, you can edit the paths. They are numberd from the top left, in rows (eg, 4 is Camera by default) and the bottom row are iDock, again numbered left to right.
If you have issues after the flash, please Hard Reset. This will clear previous stuff, and make sure the new ROM becomes the full ROM.
bug?
First, thank you for this fast rom. I'm now testing, and noticed the calendar icon has no link. Is this a bug? I've hard reset and flashed a few times, same result. Also, my SD data was wiped after flash! Luckily, I have a backup from last week... Thanks again!
downloading now! i <3 ur work l3v5y,
will post results after
only problem im having is there is no mms,
usually its in folders in mms, i cant remember
seeing it in previous versions?
im using orange, any ideas?
xiandrinker said:
only problem im having is there is no mms,
usually its in folders in mms, i cant remember
seeing it in previous versions?
im using orange, any ideas?
Click to expand...
Click to collapse
There is MMS. You'll need to go through Text Messages, and hit Menu->New->MMS.
mrx8 said:
First, thank you for this fast rom. I'm now testing, and noticed the calendar icon has no link. Is this a bug? I've hard reset and flashed a few times, same result. Also, my SD data was wiped after flash! Luckily, I have a backup from last week... Thanks again!
Click to expand...
Click to collapse
Umm... Not noticed that!
If you can edit the registry, go to HKCU\Software\l3v5y\iLaunch, and change the app2 path to "\windows\calendar.exe". I can upload a cab when I have the time!
Waiting days ago and there is no fixed version
me too waiting for the fixed version. But maybe he's got real work to do or may be he's trying newer builds as 20275 or may be even 20290
Maybe I have a real life!
I'll work on it soon, but I've had things to do...
New ROM is ready for flashing without bugs (i test 2 days everything).
Removed : Marketplace, Bing, CoPilot
Added : Black dailer (thx to TangerineTractor)
THX to all for feedback and possibility to improve
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link ---- HERE ----
-------------------------------------------------------------------------
6.4.2010 added new ROM 6.5.3_23541_WWE_based
Based rom 6.5.3_23541 WWE with original theme
Added : Black dailler
Quick QPS
ArkSwitch
Opera 10
Removed : Task manager
Link ---- HERE ----
Don´t forget to make HARD RESET after flash.
Don't thank me - I just found it somewhere on XDA-Dev!
Do we have any more 6.5.x themes, ones that don't have the borders around the softkey buttons - I really don't like them! Could do with a way to make the softkey font smaller...
This is by far the fastest of the ROMs published to date. No bugs yet either, very impressive - give it a try!
do this rom have phone keypad and compact qwerty?
and one thing if i already flashed rom with rom 6.5.5...do i to make hard spl again to flashed this rom?sowy..i newbie..i don't no nothing about this
can u add opera 10 and windows 2010?
emotionalhaze said:
and one thing if i already flashed rom with rom 6.5.5...do i to make hard spl again to flashed this rom?sowy..i newbie..i don't no nothing about this
Click to expand...
Click to collapse
No you don't have to.....ones HSPL you have "opened up" the phone.....
The strange think i see in the picture posted is 56 free RAM, its not much or i dont see well..
mirost1 said:
The strange think i see in the picture posted is 56 free RAM, its not much or i dont see well..
Click to expand...
Click to collapse
Just for you
Trust me or not, this ROM is fast enough.
could you please..please make theme like default.. i really love like defauly cause it more look like OEM.. hope u hear me..thx very much
Please upload to another host ?
why isn't there fuss about this ROM?
I tried this ROM today. It is fantastic! It's much speedier than the stock one, it brings 6.5.3 which we've all been waiting for and it has only minor bugs. I found some of them to be: 1.quickgps is missing(this is important for us who use the incorporated gps). Could you add that please?
2.Could you make the default htc volume bar available when we press the side volume keys? Instead of that now an ancient volume slider appears when the volume keys are pressed. Although, I noticed that the htc one is available when you press the windows flag from the dropdown menu in the top. Weird, because all that's missing is the connection between that and the hardware keys.
3.Some weird chinese input modes are available in the keyboard menu(I think that's where the ROM originated), but it would be nice if they weren't present in the WWE version of the ROM.
If these would be sorted out this ROM would be PERFECT! Because believe me, everything else is just how it's supposed to. This is much better than chris's 6.5.5. That one is still full of bugs. So thank you for making this available and if you could please solve these(minor) bugs I would be so grateful and I think I'm not the only one.
P.S. I would also like the default theme available
Not to be naggy or anything but I forgot in the previous post. Kinetic scrolling is missing. But I don't think that it can be as easily fixed...
zvoner5 said:
I tried this ROM today. It is fantastic! It's much speedier than the stock one, it brings 6.5.3 which we've all been waiting for and it has only minor bugs. I found some of them to be: 1.quickgps is missing(this is important for us who use the incorporated gps). Could you add that please?
Click to expand...
Click to collapse
QuickGPS atatched, although I always forud SeasGee to be better when I used to have an Artemis (search fo Seasgee for discussions), so if you're going to install or cook one of them...
zvoner5 said:
I tried this ROM today. It is fantastic!
Click to expand...
Click to collapse
Thank you very much for a feedback. I am collecting all this offers like you want and next version ( will be soon ) will be changed by people tips.
hye....after i flashed this rom at my htc touch t3333,my model phone has changed to t3320,can it changed back to normal?if i flashed another rom?
emotionalhaze said:
hye....after i flashed this rom at my htc touch t3333,my model phone has changed to t3320,can it changed back to normal?if i flashed another rom?
Click to expand...
Click to collapse
Sure it will. I just tried this one today : "Windows Mobile 6.5.5 Operator Replacement Rom (Build 23541)"
My phone model is back to T3333 again. The issue with this rom was that I think it was ported from a Touch2 Special Edition (T3320) from China or something.I also like the fact that Manilla is basically the same with this newer rom. Almost no bugs in it, it even has quickgps. I'm sticking with it for now.
Hi guys where can I download the new radio 3.53. It is also nice to have animated weather for touch 2
Thanks
rdelsol said:
Hi guys where can I download the new radio 3.53. It is also nice to have animated weather for touch 2
Thanks
Click to expand...
Click to collapse
Uncle Google is your friend
http://forum.xda-developers.com/showthread.php?t=651121
Your ROM is really great. But I have run into a problem... don't know if it is related to your ROM or related to HTC .
As you can find from my siggy, I own a T3320 and not a T3333. The ROM works perfectly OK but the moment I install HTC Hotfix for Owner Info, the Home screen is Gone. I mean if you press the home button - nothing happens. The impression (or image) of the Start menu or whatever you were last stays there. But this is just an image, as the icons on the image do not work. Pretty weird I know - I am also confused. But if from Settings, I remove All today items and then press the home button, I can go back to the Desktop or Home whatever you want to say. I hope I was able to clear my issue . Any suggestions ?
BTW this has happened with both of your ROMs - this one as well as the BT ROM.
On a different note, what kitchen (if any) are you using? OSkitchen is not able to cook the ROM for me, it fails at the last stage, saying there is no config setting for this device.
Official GT-B7610_B7610NXXJC2_B7610NXEEJC2_B7610XXJC1_B7610NXEEJC2_XX_XEE available on Samsung Mobile Firmware Downloader
My thread on Modaco - link
*****
Temporary link to fast server: [removed]
(compressed with 7-zip 9.13 - LZMA2)
Link will be removed after reaching transfer limit of my server.
Mirrors: Multiupload by barki82
*****
Date: 22.04.2010
WM version: WM 6.5 build 21889
Free RAM with standard WM today: 71.5 MB
New things:
- updated Settings (like in JDx ROM from Omnia 2)
- updated messaging (different layout)
- updated clock/alarms
- updated .NET Framework
- fixed missing Polish font (used in Youtube, Google Maps etc)
NOT updated (and it should be):
- Microsoft MyPhone
- Microsoft Office
- Opera (it's 9.5)
- Google Maps (3.2.1)
- Samsung's Media Player and Photo Album
- and... WM (we are still waiting for 6.5.3 build)
Thanks a lot for posting buddy. I am from India and my phone uses english language roms. The current rom i have is the stock WM 6.1 with following codes :
PDA: B7610DDIJ3
Phone: B7610XXIJ4
CSC: B7610INUIJ3
Can I use this ROM with my phone, will it be 100% safe and not void my warranty? Sorry, these are n00b questions but even though I am a seasoned WM user, I got my Omnia Pro just a few days back, so still gathering knowledge about it. In India, Samsung hasn't launched WM 6.5 update and they aren't giving any clue about when it will be available, I contacted customer care twice.
It can void your warranty because it's not available in official ways.
The ROM is 100% safe but flashing it is not. There is always some chance of bad flashing (power shortage for example). But flashing PDA and CSC parts of ROM is fairly safe. Omnia has some features to recover from bad flashing of these parts. Eboot and Phone parts are more dangerous.
PS. This ROM has Swedish/Dannish keyboard layout.
Hey thanks for the reply buddy. But I remember seeing it written somewhere that when we upgrade to the 6.5 ROMs (official), the Eboot/CSC gets updated and that is required for the 6.5 ROM to function properly. I am not 100% sure about it but still I have my doubts. Do you know anyone who has done the same ie. upgraded directly from 6.1 to 6.5 with unofficial ROM?
Also I wanted to ask that if I flash the MST file enclosed in the zip file, will it update the Eboot/CSC?
UPDATE: Got it. The MST does have the Eboot part, but not CSC. I extracted pda.nb0 using i900Extractor and used it. Worked absolutely fine, just the free ram is too low as my eboot is still using the 20 MB PP of 6.1. Plus the Widget interface is causing some problem. When I am selecting more widgets in Widet's settings menu, first the entries are being displayed in black (or maybe no text) and selecting any one of them is causing all the Widgets except digital clock to disappear. Will wait for the official update I think.
hay
is this rom german ? and has it a QWERTZ tastatur or not?
i have a csc with the qwertz and can i take my csc and this rom?
the windows icon is it downright?
what is changed to the "older" rom?
thank you
mfg
Ghost-Surfer
Hi
Yes you can select german language after flashing, on your phones screen you can select languages and it will configure it for german use if you like.
But when you flash the CSC your keyboard might be messed up, as said above.
"PS. This ROM has Swedish/Dannish keyboard layout. "
I just kept my CSC from my german winmo 6.5 stock rom B7610NDBTIK5
but flashed everything else(eboot, pda and phone) and till now I have not had any problems and my keyboard is still german layout.
As it is version 6.5 the start icon is in upper left corner as usual.
Changes you can read in first post pretty much everything is said there.
Maybe two more things,
the messaging app has really been improved, you can type a lot faster and don't have to wait so long until the letter is recognized, which is good for people who can type fast.
and if you have a DLink router and had problems using the internet that is solved somehow. I was able to use Opera and open websites for the first time since i have this phone although i still have no real stable connection.
Links at Modaco restricted?!
Hi there,
Do you guys have any idea what is going on with the links at Modaco? I was logged in, yet clicking on any of the 3 links returns: "Sorry, but you do not have permission to use this feature. If you are not logged in, you may do so using the form below if available."
Well, obviously there is no form bellow, it really is a dead end; I even tried using another computer and I got the same error.
It looks like the access had been restricted. I have e-mailed the site administrators but no answer...as expected, otherwise.
I would appreciate posting a mirror or even attaching the documents here.
Thanks a lot.
Are you registered on the Modaco forum ? If yes, try to clean cookies and browser cashe and try to login again.
TZ- said:
Are you registered on the Modaco forum ? If yes, try to clean cookies and browser cashe and try to login again.
Click to expand...
Click to collapse
Here is what I did and STILL getting the same error when trying to use any download link on Modaco:
1. Cleared IE (deleted cookies, cache, etc)
2. Used a 3rd party cleaner to do the same thing (CCleaner – latest version)
3. Registered a 2nd account with Modaco (different user ID and password)
4. Tried using another computer in my house (connected through a wireless router) to complete the same task + also my phone.
5. Installed Firefox and tried downloading again from Modaco.
...YET, THE SAME ERROR ALWAYS POPS UP.
OS: Windows 7 Ultimate (X64), IE v.8.0.7600.16385 / Firefox v.3.6.3
Is there anybody else stumbling upon this issue or I’m just an odd case? – in which case I really start believing they have something against me, personally (although they wouldn’t have any reason)
nacos said:
Modaco ... returns: "Sorry, but you do not have permission to use this feature. If you are not logged in, you may do so using the form below if available."
....
Is there anybody else stumbling upon this issue
Click to expand...
Click to collapse
Yes I have the same problem
Signed in different accounts registered in different electronic mailboxes. BUTResend Validation Link remains active.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
validation e-mail don't came.... (more than a month has passed since the registration)
who knows how to solve the problem?
NEWS
just received windows 6.5 update officially from samsung service manager after fighting for 10 months