For the last week everything has been going good cooking my own ROM's. I thought I would see if I could change the color of some of the background images, but when I do. The ROM appears to build fine, but when I try to flash my phone, it says "no image found". Is there a way to safely edit the images. I tried a few things like marking the file read only, which the original was, but no go. Any thoughts?
A Bit more detail. What program are you using to edit the images?
The most likely suggestion is that you are changing the file type when editing (bmp to jpg etc...) or changing the extension. Take a look at those options and see if that will correct the error.
You can change what is in the file, but you cannot change the file type or extension.
Good Luck,
Doug M.
I'm using gimp to edit the images. Maybe there is some other problem too. I unzipped the kitchen again and only added my packages back in, without any of the images edited, and it still said no image file. It was working with my packages before, and now it isn't. Not sure what is wrong.
OK, I think I figured it out. It has something to do with my memory card. once I took it out, everything worked fine.
Related
Has anyone figured out how to change the boot animation?
It seems it's stored in /system/media/bootanimation.zip
I tried replacing the .PNG images inside the archive and that didn't work, although I might have messed up something. I'm just glad to be rid of that dreadful SE color splash until someone else finds a solution.
finished playing with this a little while ago... when you replace the files you must use no compression, ie store. i've attached one with the android robot waving (cropped from nexus) simple, but at least the splash is gone
toreador514 said:
finished playing with this a little while ago... when you replace the files you must use no compression, ie store. i've attached one with the android robot waving (cropped from nexus) simple, but at least the splash is gone
Click to expand...
Click to collapse
Thanks for this! Looks so sweet!!
strange... I replaced one frame to see if it changed and saw nothing ( i put a big red X across one image ). I did use no compression ( kept the zip open in winrar and saved )
will try again!
morning_wood said:
strange... I replaced one frame to see if it changed and saw nothing ( i put a big red X across one image ). I did use no compression ( kept the zip open in winrar and saved )
will try again!
Click to expand...
Click to collapse
i finally found it for sure...from the zip above extract them all put your images in an then add in a zip file all of them again but you have to rename it as bootanimation.zip and you have to choose at winrar compression method store...its final and you can put anything you want...
Thank you for helping me sort this out.
Here's GLa’DOS "Android Scribble" animation for the x10 mini.
Apparently anim2 lasts a couple of seconds, and anim3 last the longest.
I lost my first x10 mini, so I added a name and telephone number for my animation after posting (and a lock screen for the phone).
if anyone want me to make any anime feel free...
here is my first one and of course greek...
http://i47.photobucket.com/albums/f172/enormous101/Untitled.gif
http://i47.photobucket.com/albums/f172/enormous101/Untitled1.gif
http://www.mediafire.com/?abm54nd13pocn1d
Noice one peeps.
Simplified it a bit down to one folder now though.
Got mine working now (needs 24bit png)
Sent from my E10i using XDA App
Hi Guys.
I've been trying to change the bootanimation, but as
I'm a little slow to understand, I have no doubt
to decompress it and stuff.
Who can explain me the luxuries of details please?
It would be a great help ...
FreddyStark said:
Hi Guys.
I've been trying to change the bootanimation, but as
I'm a little slow to understand, I have no doubt
to decompress it and stuff.
Who can explain me the luxuries of details please?
It would be a great help ...
Click to expand...
Click to collapse
1 root your phone
2 download rootexplorer(<---and install it) & any bootanimation.zip you want
3 open rootexplorer and go to your sdcard hold down your finger and choose copy
4 then go to system/media
5 at the upper of your root explorer its a button that says mount r/w make it says by pushing it mount r/o
6 push the button paste and then when it says ovewrite push yes
7 reboot and you r ready!!!!
if i make it a single file you will not have the option when the first animation is over the second to be anime it will be a still picture if you want that just leave one image in the second folder..because it have 2 phases of animation..!!!!(if you remember first when the colours where mixing and then the still image with sony ericsson logo and letters)
I've been trying to edit the desc.txt file so I can have a little more flexibility but even if I save it without making any changes it stops working.
After a look around the interwebs someone mentioned saving in the UNIX format, so I used Notepad ++ in UNIX and tried editing/saving in that but there's still problems, sometimes it doesn't work at all and sometimes it only shows the first folder.
Also, are there any limitations as to framerate and how many files can go in the part0/part1 folders (revision of enormous101's bootanimation.zip).
Finally, is it ok to add a part2?
do not use compression - use Winrar and select "store"
Mitchio said:
I've been trying to edit the desc.txt file so I can have a little more flexibility but even if I save it without making any changes it stops working.
After a look around the interwebs someone mentioned saving in the UNIX format, so I used Notepad ++ in UNIX and tried editing/saving in that but there's still problems, sometimes it doesn't work at all and sometimes it only shows the first folder.
Also, are there any limitations as to framerate and how many files can go in the part0/part1 folders (revision of enormous101's bootanimation.zip).
Finally, is it ok to add a part2?
Click to expand...
Click to collapse
as i mentioned part 2 is when the bootanimation of sony ericsson stays frozen you can add anything you want and its safe to play with part two.. no limitation except your internal storage!!!!what exactly are you trying to do with desc?may i help you?if you find my preview posts at the first page you will find to download the bootanimation.zip with two parts so unzip it and when you add your images zip it with winrar at store compression mode...
morning_wood said:
do not use compression - use Winrar and select "store"
Click to expand...
Click to collapse
Already doing that.
Maybe a stupid idea, but... has anyone tried to use transparent images?
I want to watch the kernel booting
edit: Forget this.
Nice thread!
I was wondering about the desc.txt file. I am using the Rogers 2.1 firmware and I want to remove the Rogers screen that shows up just before desktop loads. The PNG file for the Rogers screen is located in Anim5 and I was wondering if I just removed the entry for anim5 in the desc file, would that do the trick? I've already moved the original bootanimation.zip file onto my computer so it is backed up but I was just wondering if this would work. I am using a X10 but it seems like the file system is the same which is why I'm asking here. Any help would be appreciated!
hope helped
JDwan said:
Nice thread!
I was wondering about the desc.txt file. I am using the Rogers 2.1 firmware and I want to remove the Rogers screen that shows up just before desktop loads. The PNG file for the Rogers screen is located in Anim5 and I was wondering if I just removed the entry for anim5 in the desc file, would that do the trick? I've already moved the original bootanimation.zip file onto my computer so it is backed up but I was just wondering if this would work. I am using a X10 but it seems like the file system is the same which is why I'm asking here. Any help would be appreciated!
Click to expand...
Click to collapse
if you dont know how to change desc.txt then dont...unzip the bootanimation.zip change the images inside anim5 folder and then zip it but at compression mode use ''store'' instead of everything else and just put it in your phone...i cant change your desc.txt and make it into two folders because i dont own x10...
enormous101 said:
if you dont know how to change desc.txt then dont...unzip the bootanimation.zip change the images inside anim5 folder and then zip it but at compression mode use ''store'' instead of everything else and just put it in your phone...i cant change your desc.txt and make it into two folders because i dont own x10...
Click to expand...
Click to collapse
Thanks for your response! From what I've been reading, it seems that if I remove the entry for anim5 in the desc.txt, that it won't load that animation. It just seems easier to do this than to replace the image in that folder. Though the problem would then be making changes to a UNIX based txt file using a Windows OS and then the phone not recognizing the desc.txt file based on it being in the wrong format.
Anyway, I suppose I could just copy over the last image in anim4 and replace the one in anim5 with that and that would be the easier solution (as per your suggestion).
Here is the thread I was reading where it describes the desc.txt file and how to modify your boot animation.
http://www.droidforums.net/forum/droid-hacks/33932-bootanimation-zip-file-explained.html
I was tying to make a fancy updater-script for an add-on for my ROM, but I kept getting a Status 6 error when flashing, so I stripped it back to nothing, just the most basic commands, and eventually got it to work. I made a copy, tried editing it to add the fancy stuff back in... broke again.
So I stripped the copy back to the basic commands... and it still breaks .
As far as I can see, the two files I have attached are identical in every single way, but one fails with a Status 6, the other flashes (BattMod works, update doesn't). Both are edited using gedit on Ubuntu, both zips are created in Ubuntu, neither are signed.
Can anyone see why, I am really tearing my hair out here... all I want to do is add some ui_prints and some progress bars .
I haven't looked it them yet, but make sure you are using the correct update-binary. Different ones support different number of parameters in the mount command.
Don't leave junk files in the update like updater-script.old, it's bad practice
My guess would be that since it's named update.zip, it's looking for a signature and it can't find one. Try renaming update.zip to battmod.zip and see if it works, or sign it first with testsign.
l0st.prophet said:
I was tying to make a fancy updater-script for an add-on for my ROM, but I kept getting a Status 6 error when flashing, so I stripped it back to nothing, just the most basic commands, and eventually got it to work. I made a copy, tried editing it to add the fancy stuff back in... broke again.
So I stripped the copy back to the basic commands... and it still breaks .
As far as I can see, the two files I have attached are identical in every single way, but one fails with a Status 6, the other flashes (BattMod works, update doesn't). Both are edited using gedit on Ubuntu, both zips are created in Ubuntu, neither are signed.
Can anyone see why, I am really tearing my hair out here... all I want to do is add some ui_prints and some progress bars .
Click to expand...
Click to collapse
With what are you editing it?
I've found out that editing it with notepad or any program won't work even if i'm using the right commands, so i decided to use amend2edify, you select an update-script (an update-script you can edit it with notepad without any problem) and it converts it into updater-script, updater-binary, but you have the possibility to edit anything in the output that you want and save it, or just copy-paste into the output the commands in your updater-script onto output by overwriting the converted output.
Don't know if i explained myself well.
Good luck
Try This One
Blank-CWM.zip
It's made for the Moto Photon, so you will need to:
1) Replace the update-binary with one from your phone.
2) Copy the file you wish to flash
3) Delete the txt files in it as well as any folders that you do not need to use in the process of flashing
4) Be sure to set the permissions to target the folder or file you are flashing. If you do NOT update this, you will end up in bootloops (Don't say I didn't warn you)
5) Flash away
Cheers!
So far I've found a lot of helpful threads on boot animations... I am simply modifying the existing one on my phone...
what I'm trying to do...
when a thunderbolt boots up it says "HTC"
then it says "HTC quietly brilliant"
then the thunderbolt clip with BAMF in the bottom right corner...
I WANT to replace the .PNG file that has "HTC quitly brilliant" to "HTC quietly rooted" with a pic of an android eating an apple...
THATS IT... I have made the picture i want in photoshop, named it the same name...
I have copied the zip off my phone, put that picture (png file) over the existing one in the .zip.... then renamed the bootanimation.zip file in my phone to bootanimation_original.zip and copied the new verizon to the same file as bootanimaton.zip... the phone boots... says "HTC" then its black and goes straight into the thunderbolt boot thing...
the only thing i can think is that the file is too big... the original is about 14kb the new one is 26kb... I tried saving it smaller but that was as small as i can get it through photoshop...
any help would be much appreciated!... (i also changed the file to 'read only' as the original was also)
please help!
thank you!
So if i understand correctly, you are seeing the rest of the animation.
If that's the case, then it has to be a problem with the image. It could be something as simple as the file name.
If you can't get it figured out, post it here as an attachment and I would be happy to take a look at it for you.
Sent from my B.A.M.F. Thunderbolt
I don't think the file size matters i have made a bunch of different ones. One thing to check is inside the bootanimation.zip file there is a text document called Desc.txt you have to adjust your desc file accordingly. Mainly you want your image width and height.
your desc should look something like this
"480 800 15p 1 45 androidp 1 1 VZWp 1 300 progress"
480 and 800 being you width and height, 15p is your frames per second, 1 is the number of times for the video to loop( change to 0 if you want that animation to loop to boot is complete), and not sure about the 45 i think how long to wait before starting images in the VZW folder. and same goes for numbers after VZWp. Also not sure on the progress most likely to hold last image till boot process is completed.
Edit:
Also when you re compress the ZIP file make sure you change the setting for compression method to "Store"
gadget! said:
So if i understand correctly, you are seeing the rest of the animation.
If that's the case, then it has to be a problem with the image. It could be something as simple as the file name.
If you can't get it figured out, post it here as an attachment and I would be happy to take a look at it for you.
Sent from my B.A.M.F. Thunderbolt
Click to expand...
Click to collapse
Correct, I CAN see the rest of the animation, just NOT that part I replaced... here's how I did it at first... at first I just copied the file out, made the adjustments I waned, and then dragged and dropped it back in the zip'd folder (I use windows XP if that makes any difference) it put my file over the existing one in the .zip.... then i put that in place of the bootanimation.zip on the phone...
THEN i tried downloading 7-Zip... i unzipped the whole file, put my file in, re-zipped my whole folder with NO compression... that killed the entire animation boot up thing all together... I'm using se explorer with root permissions to put these in the system/media folder...
so... yeah... not getting very far...
Tried attaching the .zip but it was 11mb and i can only post up to 8mb .zips... i'll post JUST the image, which is the correct width/height...
it is also named exactly what the other file was named...
I'm not sure what bootanimation file you are starting with but since you say it says BAMF I'll assume it's the bootanimation from the das BAMF ROM.
Actually, I made the bootanimations for the BAMF ROMS.
The only thing that confuses me is that it is only about 4MB in size?
Attached is the one from the BAMF ROM with your picture in it.
Just rename it to bootanimation.zip, put it on tour TB and see if that's the one you wanted.
I put it on my phone to test and it works as it should.
I realize this thread is a bit old, but I'm having a similar problem.
I'm using cyanogenmod on my thunderbolt, but since I like red, I thought I'd try changing the boot anim.
So I extracted the original boot anim and hue shifted the images, then re-zipped it and i get nothing at all. Putting the original back works fine. Is there maybe something that 7-zip does to make it not work, or maybe something that photoshop did to the images? I have opened the zip that i made on the phone and viewed the images there so the gallery can read the images once extracted from the zip. (If that makes a difference.)
Edit: Apparently my problem was that the only way to get it to show was to use store for the zip compression.
This guide will explain how to theme your Dialer for firmwares 2.2 and higher. This will very likely only work on De-Odexedroms. If you're not sure what deodexed is, it is not Dell Stock, if you have a custom ROM check with the Chef.
I will make this as easy as possible. This is for windows. The only tools you should need is 7zip and a good image editor, like Photoshop, Paint.net or GIMP.
I will attach an DialerTheme.zip with custom Contacts.apk and a stock Phone.apk to use.
Theming Contacts.apk, will customize the things you see before placing a call.
Theming Phone.apk, will customize images during or in-call.
For Dialer background in Contacts before calling, I recommend using an 800x800 .png, make sure its not just renamed .png but actually saved as a .png
This can be a photo, picture or solid color, whatever you desire. Name this "custom_dialer_background.png" without quotes and with the underscores.
I will explain how to copy this to the .apk, most will know how to do this, but I will explain. With 7zip installed, right click on my DialerTheme.zip, choose 7zip, then mouseover to ..open archive. then double click on \system folder, then double click \app folder, then double click contacts.apk, double click \res folder, then double click \drawable-long-finger folder. Now simply drag and drop your custom_dialer_background.png into this folder. It will ask you if you want to replace. Say Ok or yes. Don't worry it doesn't move, just copies and keeps your original. Next do the same and copy to \drawable-long-land-finger and also \drawable-mdpi-finger. Now close the window and it should ask yo to update the archive, say Ok or yes. Done. That's it for contacts and the 1st dialer.
The next one is a bit trickier and may take a bit more time. It involves .9.pngs, which are stretchable images and can be difficult to work with. Lets make it easy for our selves. Again open DialerTheme.zip as an archive with 7zip and navigate to Phone.apk\res\drawable-hdpi. we need to copy the first 5 files from here to your desktop, or a folder to make things neater.
These are:
bg_in_call_gradient_bluetooth.9.png,
bg_in_call_gradient_connected.9.png,
bg_in_call_gradient_ended.9.png,
bg_in_call_gradient_on_hold.9.png, and
bg_in_call_gradient_unidentified.9.png
A quick way to do this is to open any one with your photo editor and make your changes, (eg.paste your picture or image). The ones I am using are 480x754, but I think it should be fine using the same 800x800 from before. If you start adding layers to it though it may not save correctly, I find copy/paste works just fine. Now save and it should retain the .9.png extension. You can either do the remaining 4 or just open the 1st one and choose save as: bg_in_call_gradient_connected.9.png,(or even a copy and rename should work) just make sure it naturally retains the .9.png extension which already contains the boundaries and data we need. When you have all 5 looking as you wish with .9.png extension still intact, we can then move these to our zip in the same location( mulit-move by holding CTRL while selecting all 5). It will ask if you want to overwrite say yes. Also copy these 5 files to phone\res\drawable-long-finger, and say ok to overwrite.
Now we need these same 5 for a landscape view in-call. So you either rotate them, if it doesn't compromise your image. These images are also normal .png's, so they will not stretch. You may need to crop them, or expand your canvas. The ones I am using are 802x477 and look just fine. When you have all 5 name them as before except without .9. (I wouldnt recommend just renaming a .9.png to .png, although it would probably work, I suggest opening a.9 and saving it as .png first then copying and renaming should be fine. Same 5 filenames as before without .9
bg_in_call_gradient_bluetooth.png,
bg_in_call_gradient_connected.png,
bg_in_call_gradient_ended.png,
bg_in_call_gradient_on_hold.png, and
bg_in_call_gradient_unidentified.png
copy these like we did before to phone\res\drawable-long-land-finger.
Close the archive when finished and it should ask you to update, say OK. Thats it. Now place on SD Card and flash in recovery.
This doesn't theme anything else, but you can change all the other images yourself in the same manner. Try making the buttons transparent,etc! Just remember to retain the .9.png or it will not display correctly.
Because we have done it this way, if you try to decompile and rebuild it is likely you will get "missing .9.chunk data, etc." But we shouldnt need to decompile again, all images can be drag and dropped.
This method should not have any problems, bootloops, stuck at logos, because were only swapping out .png's, If anything you may get an immediate force close when trying to open phone or contacts, likely becuase an image is missing/named incorrectly or the size is too far from the original.(which I think android will still try to display...up to a point)
There is also a .zip in next post to return to stock phone and contacts.apk
If you need further assistance, search, then post here and we will try to help.
reserved
Update: custom background will now be on all screens!
If no one else makes a transparent buttons-so you can see your whole wallpaper-theme, I may do it when I have time. This theme also doesn't change any background in your contact list, etc. Those will still be black. I can change those as well and may do so in an update. If so, it will use the same image as custom_dialer_background.
::bump::
The secret sauce...
great post
Howdy
I'm glad you posted this, I have been PM'ing peolpe to try and found out how to do this, not to look a gift horse in the mouth, but might you have something similiar for the keyboard??
THanks again for the post.
So, I downloaded the app I'd like to mod. I unpack it and then go through the meticulous process of replacing all the images to change the overall look. I have done texture work, I understand what I'm doing with this simple program. However, when I rezip all the files into an apk, it won't install. None of the code has been edited, just graphical changes and it won't work.
I have no idea what I'm doing wrong.
@ChronicNeo
Use APK Editor. This always worked for me.