Share network internet connection through udb - Hero, G2 Touch Q&A, Help & Troubleshooting

Hi everybody,
the gprs internet connection at my place is very slow/broken.
I'm searching for a posibility to share my fast network internet connection with my Hero through USB like "Active Sync" does.
Can someone help me, please?
Thanks in advance, Plattendoc

Plattendoktor said:
I'm searching for a posibility to share my fast network internet connection with my Hero through USB like "Active Sync" does.
Click to expand...
Click to collapse
Search the forum for "tethering" or just go to Wireless Settings -> Share.

I think he means to allow the phone to use his PC's broadband connection, like you can with WinMo and Activsync.
there is no way to do this as far as i know with ANY android phone at the moment.

internet sharing on hero
Hi well at moment you cannot do it through but i use my hero on my BT broadband by the wifi and if your worried about power u can plug it into usb on pc to charge while using it or in to its own psu

Related

WIFI Probelm. Get connection but cant use!

Ok, I looked on the WIKI and searched the site for a solution and was unable to find one.
Here is my problem. I have wireless internet at my house. My access point works fine. My laptop and PS3 connect to with no problem at all. My Touch pro connects to it with no problem. But, after I connect to the WIFI (and verify it is connected) I cannot use it?
I tried to open opera = "site not found" try to open Skyfire = "site not found"
I cant even update my weather while connected to WIFI. So thats my problem. I can connect to WIFI but not use it!
ANY AND ALL HELP WILL BE GREATLY APPRECIATED. Thank you in advance. iko[
anyone....
I'm having the exact same problem...
Coldones said:
I'm having the exact same problem...
Click to expand...
Click to collapse
You and I are not the first. I researched this (in depth) and it is found on a lot of sites, people complaining about it....However, I have yet to find an answer, that is why I came here...these guys can usually solve some pretty complex stuff!
Hopefully someone answers soon......
bump
iko172302 said:
Ok, I looked on the WIKI and searched the site for a solution and was unable to find one.
Here is my problem. I have wireless internet at my house. My access point works fine. My laptop and PS3 connect to with no problem at all. My Touch pro connects to it with no problem. But, after I connect to the WIFI (and verify it is connected) I cannot use it?
I tried to open opera = "site not found" try to open Skyfire = "site not found"
I cant even update my weather while connected to WIFI. So thats my problem. I can connect to WIFI but not use it!
ANY AND ALL HELP WILL BE GREATLY APPRECIATED. Thank you in advance. iko[
Click to expand...
Click to collapse
I have the same problem... ps3s and all. The only difference is my network shows up on my TP but it displays half the signal strength my laptop and my ps3s show.
broche85 said:
I have the same problem... ps3s and all. The only difference is my network shows up on my TP but it displays half the signal strength my laptop and my ps3s show.
Click to expand...
Click to collapse
ok i fix it....very very easy...under the "WIFI" settings there is a box to check...next to the box it says "use IEEE 802.1X Network Access Control" check this box then under that is a choice for "EAP Type" choose the "smart card" connection....also turn off your data connection via the comm manager...for some reason my TP wont let me connect to WIFI when the data communication is enabled....good luck worked for me!
iko172302 said:
ok i fix it....very very easy...under the "WIFI" settings there is a box to check...next to the box it says "use IEEE 802.1X Network Access Control" check this box then under that is a choice for "EAP Type" choose the "smart card" connection....also turn off your data connection via the comm manager...for some reason my TP wont let me connect to WIFI when the data communication is enabled....good luck worked for me!
Click to expand...
Click to collapse
When I go into Settings, the Connections tab, and click on WiFi, I don't see any check boxes at all, let alone one for "Use IEEE ...".
I must be in the wrong menu/place. Could someone please help direct me to the right place?
you'll see the check boxes once you connect to a wifi..i also have wireless internet at my house, and can connect and use my wifi just fine.
try to install some app that block`s data connections from your mobile provider ... nodata for example, you can find a link to it on xda.
set all the other connections to disabled ... and you phone connection to GSM ... not GPRS, EDGE or something else ...
set your wi-fi connection to connect to the internet ... not to work.
this worked for me for a dlink 784 router, now i`m banging my head against a 524 (again DLink) and have the same problem it connects but does not get on the internet. the problem seems to come from the TP, some settings need adjusting but i didnt figure out which one yet ...
good luck
PS: for iko, i think you have your router set on enteprise security, not personal... for personal WPA, WPA2 with a PSK, and TKIP or AES encryption, the "use IEEE 802.1X Network Access Control" is checked and greyed out, and you do not have access to it on the TP

Share WM6 Internet HSDPA on a PC via cable or BT.

Hello guys
The WM Internet connection is provided at a very reasonable price w.r.t. the standard PC one.
I wonder if there is any possibility to share this connection with a PC.
Is there any SW that makes the bridge ?
Thanks in advance
miazza
If you are using any of the custom rom's, you should have the Internet sharing option while Active sync connection gets initiated. Having selected that option and data connection active on the mobile, your laptop or pc active-synched with the phone, can use the phone's internet.
In case, you do not see that option during active sync connection, look at the below thread.
http://forum.xda-developers.com/showthread.php?t=377047

question about the HD2 router

Hello,
I have internet on my Desktop PC and connect it using the cable to my hd2 through active sync.
so I want to use the HD2 router to connect my laptop to this internet connection. However, when I open the router I cannot rout the active sync. connection but I can only rout the internet from my service provider or 3g which i dont want.
I hope you can help me solve this issue because I really want to use internet on my laptop using my Desktop PC connection through my HD2.
uppppp please anyone answer me
any body wanna answer
So you want your internet connection through usb
I dont believe the wifi router software is capable of routing wifi connections to the usb connection. Only to teh mobile data connection. Perhaps there is other hotspot software that can do this, but the built in one wont. (unless i'm dead wrong, but fairly sure not)
maybe this is what you are searching: http://www.wmwifirouter.com/download/WMWifiRouter-International.cab
Im using the wifirouter with no issue, works well with my data plan!

Use HD2 as a Wifi Router when connected to ActiveSync

Hi,
I don't have wifi at home, but I wanna do some surfing on my laptop, without being connected to Internet with wires.
So I got an idea: why don't I use the wifi router program on my HD2? I can connect it to my desktop computer (it's connected to the internet with a wire), and then turn it into a wifi router. But apparently it only works with GPRS to Wifi, not Active Sync to wifi.
Is it possible to do?
a5med said:
Hi,
I don't have wifi at home, but I wanna do some surfing on my laptop, without being connected to Internet with wires.
So I got an idea: why don't I use the wifi router program on my HD2? I can connect it to my desktop computer (it's connected to the internet with a wire), and then turn it into a wifi router. But apparently it only works with GPRS to Wifi, not Active Sync to wifi.
Is it possible to do?
Click to expand...
Click to collapse
So you are trying to do this:
PC -> HTCHD2 (Wifi Router)-> Laptop
Sorry I'm not sure if you can do that.
If you have 3G, it should be sufficient and you can charge the phone while using it as a router. Hopefully someone else can spread more light on this subject.
a5med said:
Hi,
I don't have wifi at home, but I wanna do some surfing on my laptop, without being connected to Internet with wires.
So I got an idea: why don't I use the wifi router program on my HD2? I can connect it to my desktop computer (it's connected to the internet with a wire), and then turn it into a wifi router. But apparently it only works with GPRS to Wifi, not Active Sync to wifi.
Is it possible to do?
Click to expand...
Click to collapse
You need wmwifirouter for that.
http://support.wmwifirouter.com/documentation/

[Q] Wifi / Internet Sharing

I know it seems pointless, but there is a reason for this... Is it possible to share my 4G/LTE internet with a router so that other devices can connect to the internet through my phone while my phone still possess the ability to use the internet?
Most would recommend setting up the hotspot, but the apps that I am trying to use are checking to see if the device is connected to a network and hotspot "disables" wifi so it looks like my phone isn't actually on a network.
What I would like is for the phone to connect to a router and share it's internet while it retains internet access.
Nexus 5 [INTERNET from 4G/LTE] ---> Nano USB Router [HooToo Tripmate Router] ---> Nexus 7 [As car stereo head unit]
Thanks and any help is greatly appreciated.
Will

Categories

Resources