Softbank X01HTC Aug-2007- Unlock - Android Q&A, Help & Troubleshooting

Hi, I have purchased a Softbank X01HTC 3G model pn 14-Aug-07 from Japan. It is locked by the software carrier. Please let me know the exact procedure how to unlock it to use other subscribers SIM card or use it in other countries. I have installed English OS (windows 5) and the details of the hardware are as below. Please suggest or send the unlock zip
model no: Herm200
Platform: pocket PC
ROM Version : 2.06.502.3
ROM date:02/02/07
radio version: 1.14.01.10
protocol: 32.50.7018.00H
SPL-1.09
Purchased on- 14-Aug-2007, from Japan
Thanks in advance for all information provided for this.
[email protected]

Related

XDA Unlocker say it is unlocked but does NOT take my SIM

I'm new to this so please be gentle with me.
I bought a O2 XDA II so that I could unlock it to use on T-Mobile.
I tried using the XDA Unlocker and but the program says that the XDA is already unlocked. However when I put me T-Mobile sim into it, I get a SIMLOCK message which tells me to enter the unlock code.
PLEASE HELP.
YOUR HELP IS GREATLY APPRECIATED>
XDA II ROM version 1.60.00WWE
ROM Date 12/03/03
Radio Version 1.10.00
Protocol Version 1337.18
ExtROM Version 1.60.50
Moderators please close.
I have used xda2unlock-setup-v2.2.exe and all the problems are resolved. I can now use my T-Mobile sim on my XDA II. Priviously I was using the old hard reset method.
Thank you for creating such a wonderfull tool.
same problem as above
my details are as follows:
ROM: 1.66.00WWe
Rom date: 02/20/04
Radio version: 1.10.0
Protocol: 1337.18
ExtRom version 166.181
I am trying to unlock and the message says 'the phone is unlocked' but I am unable to use another sim on the phone.
please help anyone
jack
try the program on the main thread.
or give me your email and i'll send it to you?

I unlock my T-Mobile PDA(siemens sx56) but i can`t do

Hi,
I get unlock my T-Mobile PDA(siemens sx56) using XDATools by writing *.nbf file into sdcard. It`s nice. But When I insert my sim card, it can`t find any network services. Plz give me a solution for this as soon as possible.
My old system configuration is:
ROM : 4.01.16 Eng
Date : 2/4/04
Radio : 6.18.00
Protocol : 324e4
I changed my new system configuration to:
ROM : 3.17.03 Eng
Date : 5/15/03
Radio : 6.18.00
Protocol : 324e4
Is there any need to change my radio version?
Help me........
Can u mail me ur answers to [email protected]

Problems with XDA2 Qtek2020

Hello I have a XDA2 (QTEK2020) locked with ONE AUSTRIA i tried to unlock it with XDA2UNLOCK but the Software means your phone is already unlocked ..... but after the next reboot the message network is locked !?!?!
Now installed:
ROM-VERSION 1.60.00GER
ROM-Datum: 12/03/03
RADIO: 1.06.01
Protokoll Version 1337.16
Ext ROM 1.72.572
how can i unlock this ?!?!?!?!?
thanks marty
are you sure you are taking the right steps to unlock it ??
you are suppose to copy xda2unlock-v2.2.exe on to your device and then run it after that it provides all the information.....
and by "but the Software means" what do you mean ?? do you mean that after running the tool it says phone already unlocked ???
http://forum.xda-developers.com/viewtopic.php?t=6963
read the detail here its as easy as eatin a cake.....
regards
jeetz
Hello now it works *fg* wrong or not activatet SIM card no modem *gggg* now it works with all providers ;-) thanks a lot !!!!

i flashed the XDA special rom - but my sx56 still locked

what to do ???
Which Radio Version is installed?
Maybe this http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2helps you....
Stefan
i checked my radio ver:
its:
rom: 3.17.03 eng
radio: A.20.11
Protocol: 324e4
to i realy need to do the whole process in the link
i dont have sd card
thanks
one more thing
how do i know if its 900/1800 or 900/1900 version
it was at&t
I think at&t just has 900/1900 devices.....
Check the rear sticker of you´re device.
If it´s a PW10A then 900/1800, if it´s a PW10B than it´s a 900/1900.
Do not trust the output of the os....
Stefan
well, i just bought
Sd card on Ebay
and i will try this method
anyway Thanks

PocketPC(PW10B1) Version A.30.09 ENG Lock

I have a AT&T (Wallaby PW10B1). When I inserted a local SIM, But No Signal in pakistan what i do. Please help me.
Hardware: PW10B1
Platform: PocketPC
ROM Version: A.30.09 ENG
ROM Date: 01/01/04
Radio Version: 6.12
Protocol Version: 324e4
IT urgent thanks in advance.
BR.
I do not know what for network bands you in pakistan.
PW10B-Devices just support 900MHz and 1900Mhz.
Maybe this is your problem.....
Stefan
LumpiStefan said:
I do not know what for network bands you in pakistan.
PW10B-Devices just support 900MHz and 1900Mhz.
Maybe this is your problem.....
Stefan
Click to expand...
Click to collapse
In pakistan network bands is 900mhz and 1800mhz.
You can try this one:
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
But pay attention. Entering Bootloader causes a hard reset. All data on the device will be lost.
Stefan

Categories

Resources