Internet Calling VoIP/SIP - S740, S743 General

Hi,
does anyone make Internet Calling work on Rose? I have Rose with genuine ROM, unlocked from the box and have in settings Internet Calling option. I have tried to make SIP setting from tread http://forum.xda-developers.com/showthread.php?t=299950 but I have problem, I could not install any CAB file I made, anytime I received an error "installation of VoIP.cab was unsuccessful". So, does anyone know where is the problem, why I cannot install .cab file?
Or are there another way to make Internet Calling VoIP/SIP working?
Thanks.
About:
Windows Mobile 6.1 Standard
CE OS 5.2.20279 (Build 20279.1.3.4)
Radio Version 12.23.30.06H_0.24.30.24
RIL Version 2.002

have you tried fring
fring? I am having trouble with wm6.5 but I think your using 6.1 so you should be fine (I think). If there is anything else just let me know

No Fring. It is disaster... Latency, Jitter... If other side starts to speak I cannot hear anymore couple seconds, one have to listen and another to speak. But clearance is 20%. This is not even decent.
Thank you for answer, anyhow.

Related

WM6 VoIP

I have asked around before about getting the WM6 VoIP on this bad boy, and no one seems interested. The standard Cab files will not work, and it has been speculated this is because of some missing certificate files.
I know there are few out there with other devices that have the 6800 as well, and we can compare the certificate files between the two devices to see if we can get this working.
Certificate bypass...
Have you tried "unlocking" the certificate requirements through the registry?
The settings are available on the HTC WIKI here: http://www.htcwiki.com/page/P4000+Telus?t=anon and will allow programs/cabs to be installed regardless of certificate authentication. Bear in mind, this is NOT a method of unlocking the phone for another network, simply a means to dismiss certificate requirements for program installation.
I'm not interested in the VOIP per se, but if the certificate is the problem, this might be a viable solution... I hope it helps.
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
I have tried it too cannot get the today plugin to show....
internet calling just doesn't show up
webdude12 said:
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
Click to expand...
Click to collapse
all files installed, internet calling checked in today's settings, but doesn't appear on today's screen.
does anyone knows what's wrong with ppc6800?
Does anyone have another WM6 device that they have the VoIP Client working on. I think the key maybe a missing Registery setting, but dont have another device to compare too.
Look in this key:
\registry\HKLM\SOFTWARE\OEM\PhoneSetting\
I am guessing for something along the lines of: HiddenInternetPhone or HiddenVoip with a value of 0.
No "Internet Calling" on HTC P4000 (Telus)
I have the same problem. I installed WM6VoIP.CAB and SetupVoIP_v0.3.CAB, and setup access to the voip provider sip server (voipbuster.com). I was logged into voipbuster on my laptop, and as soon as I clicked ok from the "Setup VOIP" page, I received a message on my laptop indicating that I've been logged out of voipbuster because I have logged in from another computer. So, this means that Internet Calling is indeed working (or at least connected to the voip sip server), but just doesn't show up on the Today screen. I can see the "Internet Calling" option in Settings > Today > Items page, but "Internet Calling" does not appear in the Today page. It may be hidden or missing due to a registry key as the previous poster suggests. I have no idea what that key would be, but if anybody could look and see if you can find anything that would ShowInternetCalling, HideInternetCalling, or something similar in the registry, that would be much appreciated. Thanks.
VOIP works with no Internet Calling on Today Screen
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Now Working, just a few bugs
Ok I’ve got the WM6 sip client working on my phone (telus-p4000) the same way with all the same problems as sabrex does. I’ve tried many voip clients on this phone with the same speaker problem, I’ve read some where that the HTC api doesn’t reference how to access the earpiece speaker on the p4000. Believe me these other voip clients work on almost every phone with proper speaker output, it’s just the p4000 that routes the sound to the rear speaker. So what it looks like is the sip extension to the phone software is trying to use the default wm6 routing path there by pushing all the audio to the rear speaker instead of the earpiece. Now a work around like sabrex said is to use the corded external earpiece. I haven’t been able to get any Bluetooth headsets to work on any of the other voip clients but maybe someone will have better luck with the wm6 client. I don’t know much about sound routing in wm6 but any help with a direction to look in would be appreciated, but I think HTC will be the only ones capable of helping with this.
sabrex said:
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Click to expand...
Click to collapse
Has anyone been able to get the Today screen plugin to work with the P4000?
Hi All
Can anyone tell me where i can get hold of SetupVoIP_v0.3.CAB ?? Many Thanks!!
Where to get SetupVoIP
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Can you tell me how to di it from scratch? New Phone
i just got my Bell HTC-6800
Do I need to unlock it some how for this to work?
I have tried installing WM6VoIP.CAB and using SetupVoIP_v0.3.CAB to no avail.
Please post details of "no avail". How far did you get, any error messages?
Did you configure SIP using SetupVoIP?
- use Start / Programs / Setup VoIP?
- docs / support here
- did you set options to "whenever available", or "only if cell is not available"?
Which SIP provider are you using?
Are you using 802.11? Browser works?
When you view the phone screen, does the top left show VoIP (vs Bell Mobility)?
The Today screen doesn't work on my 6800, and I don't know how to solve it. I can place and receive calls, but the received audio is very quiet and comes through the handsfree (back) speaker. Headset is also very quiet (both wired and bluetooth). But when I'm at our remote mining areas I can place and receive calls.
Are you experienced with VoIP in general, and SIP in particular?
The whole story is in this very long thread:
http://forum.xda-developers.com/showthread.php?p=1590688#post1590688
got it working on bell 6800
gadzuk said:
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Click to expand...
Click to collapse
thanks for all the info here guys, i was able to get it working today on a bell 6800. im disappointed in the sound and features though. i have a nokia E70 and i use it's built in sip client which works will all the features of my asterisk PBX. i hope that this software will continue to improve.
Hi folks,
anyone managed to fix the audio problem on Titan ( P4000)
I get audio from the back speaher only
Thanks
back speaker audio
this is what i heard about the problem
Apparently HTC does not use standard Windows Mobile Audio paths on their devices as opposed to some of the other device manufactures.
This is word for word from HTC:
“It works on most other Windows Mobile devices because they more than likely use Microsoft standard audio path controls, HTC uses their own software architecture which is why it doesn't perform the same.”
Well, that sucks ...
They supply 80% of PDA phones to the market
and there is no work around it ?
My question, why is the sound quiet? Any other application that would put sound out would be normal volume. Why is the VoIP quiet then??
AGEphone Mobile 2 Speakerphone Edition does support the internal speaker on some select models (more to follow!) as of now!

Cannot receive calls when GPRS is on

During the past several months I've tried several WM6 ROMs - mostly PDAViet's. Currently I have the following:
ROM version: 7.7.7.7 WWE
ROM Date: 9/08/07
Radio version: 1_02.20.21
Protocol Version 4.1.13.9
ExtROM version: Mystrerious 1.0
The device is Imate's Jamin (Prophet G3). Since I started to use WM6, I am often having the problem when I cannot receive the incoming calls from time to time - my friends have to leave the voice messages in my mailbox even when my phone is on and the cell coverage is great. It seems that it is related to GPRS activity - I have GPRS/EDGE internet connection always on and I have my email synchronized with an Exchange server over the air. What is even worse, I have no way of knowing if someone has called me - even if they leave a voice message I am getting no notification on the PDA. I started to call my own cell number often trying to understand the pattern and I noticed that when I cannot get through, I can disable the GPRS and after that the call gets through.
I don't remember having such problems with original WM5 ROM when I purchased my Prophet, so I assume it is related to WM6.
As I said, I tried different ROMs and different RadioROMs (now I rolled back to the original RadioROM originally provided by Imate, since I saw no improvement with newer RadioROMs).
I have T-Mobile USA mobile service with Total Internet plan if it makes any difference...
The questions:
is anyone else experiencing problems like this? any workarounds?
is phone line is supposed to work simultaneously with GPRS? Could it be caused by a difference between [GPRS simply connected and no internet activity] and [GPRS connected and sending/receiving data]?
could it be related to the settings of activesync (how often it syncs with Exchange or be continuously connected)?
Any help is greatly appreciated...
Incase there is any data transfer happening at the time of the call coming in (pls note even while polling there is some data being transfered) the call will not go thru.
I have been using WM6 roms for the past six months... from my signature you can see how many i have treid, in each of the roms.. I also use push mail, hence I am always connected thru edge....I get phone calls even when connected to GPRS.. however if there is any data transfer happening at that point in time the call goes into my voice mail.
i think it is problem of your service provider,try another radio rom?
I am having the same problem, any solutions?
It happens to my device roughly once a month, and my GPRS is always off. So IMHO it is related to WM6. It did not happened on WM5.
My gprs (edge) connection is always on and I have the same problems on the radio rom 2.41.21. Try to use the radio 2.61.21 - no problems with incoming calls...
Korand, thanks for the suggestion. I actually tried 2.61.21 a couple of months ago - it didn't fix this problem
For now, I've changed my Activesync settings so that it will sync data via GPRS every 30 mins (before it was "stay connected all the time") - hopefully it will decrease the probability of getting the incoming call at the time of data transfer.
zeroed said:
i think it is problem of your service provider,try another radio rom?
Click to expand...
Click to collapse
lol... this is no problem.. this is wht is supposd to happen on GSm.. because it works on a single FM frequency n not a band like CDMA or TDMA.. this is normal.. its jus like whne ur using ur dialup internet n ur phone line gets busy.. soo no solution unless u switch to TDMA
hahahha,you don't know what are you talking about,what FM frequency,this is not Benefon Delta lol
zeroed said:
hahahha,you don't know what are you talking about,what FM frequency,this is not Benefon Delta lol
Click to expand...
Click to collapse
ok.. then can u tell me the kind of modulation is used in GSM.. go wikipedia ur ass n u will see wht im talkin.. ur such a n00b
it is Gaussian minimum shift keying (GMSK).. jus a modified version of FM to use support multiple communications on a single frequency.. talk to me when u got ur engineering degree..
No calls reception - no calls outgoing
I have a TYTNII who suddently has the same problem of incoming calls directly to mailbox, for each calls, and also I can't call anymore.
Does anyone solve this problem?
With the Sim card in my Qtek 8300 WM5 I don't have the problem.
HTC support say they don't know this problem and ask to make a hard reset...
ROM 1.56.406.5 (30/8/2007)
Radio 1.27.12.32
lmdafred said:
I have a TYTNII who suddently has the same problem of incoming calls directly to mailbox, for each calls, and also I can't call anymore.
Does anyone solve this problem?
With the Sim card in my Qtek 8300 WM5 I don't have the problem.
HTC support say they don't know this problem and ask to make a hard reset...
ROM 1.56.406.5 (30/8/2007)
Radio 1.27.12.32
Click to expand...
Click to collapse
seems then its a common problem since tytnII has it may be there is something written in registry to divert call to voicemail while data traffic is going ON to avoid bad colliding accidents of voice and data packets on the same highway
to avoid dirty signals..thats all..
btw,all i know is that GPRS+receive calls = bandwidth bottleneck...see? how "cheap" the GSM is
so,the solution is to disable one of them...

VOIP in WM61, done!

After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/124054481/destr0_VOIP_WM61___SIP_Config_1.1.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
Nice work, will test now.
Been a while since ive seen a single cab for the drivers and SIP config tool (thx shaun33).
EDIT:: fired the cab up in WM6 emulator device and the dll loads up nicely, sip config tool is there. Internet Calling today item shows up and the Internet tab appears in phone settings. Its good stuff....didnt need a soft reset either.
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
Hi destr0, just installed on Kaiser (TyTN_II) with HyperDragon IIIm ROM (WM 6.1 "lite"). Registered and running to my VoIP provider like a charm.
Tomorrow I'll use/test it heavily at work (where we have an asterisk/sip as internal phone system)...
Thanks a lot for your sharing.
Dude,
Its awsome to see that that app is still kicking.
If you can think of any upgrades that would make it easier to intergrate with your cab shoot me a PM or catch me in the IRC chan.
Everything seems to be working ok on my AT&T Tilt 8925, but i dunno what to put for sip server and such. Tried going to tools, load config, from device and that brings up an error every time.
daigoro64, I have an asterisk server at work and even with it, calls go out through the wifi and reach the destination phone.
yusuke14, you have to create yourself a VOIP account. There are many providers, I personally use three from betamax: www.voipbuster.com, www.justvoip.com and www.intervoip.com. You can look at theis fares here: http://backsla.sh/betamax
Shaun33, of course your app still rocks! many thanks for it. I suggest you could have a list of sip servers in a dropdown box to be easier to configure for the first time
Good work destr0. I keep it for next NiAx's Rom.
NiAx.Team
You listen from your external speaker or internal ? like normal call ?
John_A said:
You listen from your external speaker or internal ? like normal call ?
Click to expand...
Click to collapse
from the internal, like a normal call
Thanks a lot .... I try it now with my asterisk
Can´t wait to try it, nice work
Great work man..Keep it up
Here is an OEM for It :http://rapidshare.com/files/123749980/OEM_VOIP.rar
A big thank you for a great job.
Gracias
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
jmmertens said:
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
Click to expand...
Click to collapse
Can anyone confirm it uses the external speaker in the Elfin?
In my TYTN (build 19949.1.2) and Trinity (build 19213) uses the internal one
very good efforts. Wow!
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
--> Will it work on mi P3300 (Artemis) running WM5 ??
tried it but doesn't work here.
Incoming calls: after answering with green button other party still hears the tone as if i didn't pick up.
Outgoing calls: can't hear other party
this was tested over 3G. Haven't tested over wifi.

sip config

Does anyone know a config tool for sip on the HTC S740?
I can only find tools for touchphones.
electracks said:
Does anyone know a config tool for sip on the HTC S740?
I can only find tools for touchphones.
Click to expand...
Click to collapse
Hello, you can use the FRING. It has SIP, too. It is true there are many others protocols in FRING, but you needn't use it. Just easy, use only SIP protocol...
Thanks, but I found a way here in the forum to use the WM 6.1 integrated Voip function.
Do you mind sharing how did you do it ?
SIP Client on S740
Has anyone managed to figure this out yet? I tried tool for WM6.1 from XDA forum but get error.
VOIP over wifi at home, with own provider sip settings
Hello all,
Since 1,5 week i have the HTC s740 (rose), so i am experimenting with it these days.
At home i have wifi-access. My internetconnection can also be used to call with (with a normal phone). Therefore there are some settings in my modem.
Now i want tot know if there is a way to install an app on my HTC, put the sip settings from my internetaccount in there and call with my mobile phone instead of my normal phone.
the tool i found at xda presents an error, in a moment i am going to try Fring, but any tips a welcome.
(sorry for my bad english..)
Thanks in advance!
greetings Daniël
Has anyone manage to get SIP VoIP working? I install the voip .cab and get the internet calling options ok.
But no matter what I can not load the SIP server configuration. Anyone has a .cab config that works on the HTC Rose?

Windows Mobile VoIP SIP Cab

New IMPROVED CABS HERE​
*********
WM6.5 and now WM6.1
*********​Install on Fresh OS
Tested and flying on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K].
This time i have made single cab[sipConfig.cab] with Schap`s voip setup inbuilt. Hopefully 3g option will work with this cab as i have changed few settings. Tweaked is home screen item selection[select thru Available and selected to make cellular call or sip/voip call{one have to use classic home screen to do this}]. This cab is GSM codec based unlike previous cabs hence very low bandwidth is required to place calls, Can be used to make calls over GPRS but not sure. Quality of calls is .99/1 and no dropouts and one can call as long as credit available in account. What else, as this cab will integrate into phone system, it is very easy to use with addressbook, etc. I have attached audioswitch out file which if installed comes into action[can hear from earpiece] 13 seconds after phone window is active on screen, doesn`t matter calling or recieving. I have also attached SRS file just in case if someone hear less/low volume from earpiece just follow the instructions attached. Also attaced is Wifi always on file which some HD2 users need. Also 5060 port has been enabled in these cabs but you may need to forward 5060UDP port in your router for possible two way communication. Hopefully you guys like this cab, Please leave comments and suggestions. Thanks
Credits to developers.
*Most of the bugs has been fixed discussced in previous cabs.
Previous Cabs can be found here
--------------------------------------------
UPDATE : 1
DIAL PLAN​New cab[sipConfigDialPlan.cab] with jaaps Dial Plan inbuilt. Both sipConfig(setupVOIP) and DialPlan can be accessed from Start Menu. Now one have the option to install with or without dial plan. Thanks
UPDATE : 2
GPS​Now there will be no problem when using GPS [File Updated]
UPDATE : 3
START MENU​Only one instance of voipSetup shortcut in start menu
UPDATE : 4
WM6.1 SUPPORT​Now WM6.1 OS supported just choose the cab with WM6.1 written in it, others are for WM6.5 OS.
UPDATE : 5
VOLUME INCREASE Tip By: angusc Thanks ​Now one will be able to hear bit loud sound either from back speaker or earpiece.
UPDATE : 6
OTHER CODEC SUPPORT​Now all major codec supported ie: G.711 a-law, G.711 u-law, GSM codec.
--------------------------------------------
*RECOMENDED INSTALL LOCATION : DEVICE*
*DO NOT INSTALL ALL CABS, JUST INSTALL ONLY ONE YOU WANT*
*IF NOT WORKING OR GIVES YOU ERROR, THEN ITS OPERATING SYSTEM LIMITATION*
*DO NOT INSTALL WM6.1 CABS ON WM6.5 OS AND VISE VERSA*
*AudioSwitch.cab/WifiNoStandby.CAB/Tested SRS.rar cabs are OPTIONAL and can be installed on both WM6.1 and WM6.5 OS*
Will you eventually release a dialplan supported version? I know this is a nitpick but I really use that file alot.
Yes, working on it. But will take time as hard to get time off. Thanks
Any reason why I can't install this...
Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
try installing remove certificate or first cab in Tested SRS.rar attached to get rid of this warning. are you installing on fresh OS. Thanks
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
cu2cool said:
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
Click to expand...
Click to collapse
I think you are slightly confusing things, with voip you can make calls from anywhere as long as you have internet access. Now the free bit is different, you must have a voip provider and their fees may vary. Now if tmobile is giving away voip subscriptions with their wireless then I need to find out about that, but I have never heard of it!
@dhillonbros - Much love for working on this!
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
cu2cool said:
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
Click to expand...
Click to collapse
are you sure that its an integrated solution
No, I'm not sure. That's just what it looks like. There's a whole thread for it here http://forum.xda-developers.com/showthread.php?t=508715.
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
I installed todat without any errors. T-Mobile UK. The phone picks up my SIP landline service number but in the today screen after the no. it states no service.
I also appear to have two copies of the same software listed in my programs one called SetupVOIP the other sipConfig. Both on clicking setupvoip.exe
the dialer option page is blank.
looking forward to dumping fring but need a wee bit of help to get over the last hurdle.
this build is working better than older version on my Tilt. The issues I have are the dial plan, but I fixed that by editing the ipdialplan.xml file and removing all the number nines in it.
Second issue is that it looses registration after a while. I'm using AT&T 3G. Later on it is registered again but on and off throughout the day.
Installation ok but no voip on HD2
Hello,
The instalation is gonna well, but i have only the configuration tool, no additional items in today screen or phone menu, how can i switch between voip and standard calls?
br
nobisz
The configuration tool is used to set when your call will go through voip ("never", "whenever available", ...). From there it works transparently. For example, if you set to "whenever available" all calls will go through VOIP if it is able to register to the VOIP service, otherwise they will go through your cell network.
in the configuration tool, should I select TCP or UDP? I am using 3G
cesierra said:
in the configuration tool, should i select tcp or udp? I am using 3g
Click to expand...
Click to collapse
udp is the best option
@amcclean : Please try new cab. Problem fixed
interlope said:
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
Click to expand...
Click to collapse
Mines flying on HD2, same as registrar server.
In Polish version of WM 6.5 you shall add "telefon" in command.txt file (Program Files/audioswitch) for the AudioSwitch to work....

Categories

Resources