Related
It seems since 3.1.6 my keyboard has been acting up.
`Registering double-presses,
`not registering function or shift on about half of the keypresses [seems the timer to hit fcn > key is lower]
I reverted back to 3.1.5 and the problem vanished.
I've been having the same problems with 3.1.6 and 3.2 and couldn't for the life of me figure it out. Wasn't sure if it was a conflict with something I'm running or not like MagiKBLite, but even after deactivating that have the same problems...
i found this as well, i thought it was due to getting pizza grease and other junk in the keyboard and making the buttons stick. its so bad its to the point that i had to start using spb fullscreen keyboard. i am glad to see that the problem is with the software rather than the hardware. not to worry, DCD is the fu**ing man!!! im sure he will have a fix for this in the next version
All three of you need to troubleshoot this again. I haven't seen any issue on 3.1.6 or 3.2. Do this, install the pre-made ROM, your carrier file ONLY, and then see what happens..... Do this for both 3.1.6 and 3.2.... My bets are that something you included or installed is causing the issue, OR you three have a hardware issue....
I have the same issue with 3.2.0, never used 3.1.6, but I had the issue from scatch with both ROM and Kitchen builds. The biggest one for me is that I can't get the "()" keys to work and all of my contacts info has to have them around the area code due to the CIM software I have to use for work...
maskedlion said:
I have the same issue with 3.2.0, never used 3.1.6, but I had the issue from scatch with both ROM and Kitchen builds. The biggest one for me is that I can't get the "()" keys to work and all of my contacts info has to have them around the area code due to the CIM software I have to use for work...
Click to expand...
Click to collapse
Did you have the issue with your previous build?
I had issues with 3.1.6 and 3.2.0 and have been experimenting. Next thing I want to try is to find the keyboard driver in an older ROM and try plugging that into the newer one, same thing I did to get my outlook working with exchange.
azclown said:
Did you have the issue with your previous build?
Click to expand...
Click to collapse
My previous was 3.0.4 and I did not have this issue with that build.
this started for me before I even started to flash my phone. Has slowly gotten worse. I found a thread somewhere around here or ppcg that had a small cab file that fixed things right up.
I'd hit a key and the letter would appear 3-4 times, Fn would randomly lock and unlock.... now all better...
Scrufdog said:
this started for me before I even started to flash my phone. Has slowly gotten worse. I found a thread somewhere around here or ppcg that had a small cab file that fixed things right up.
I'd hit a key and the letter would appear 3-4 times, Fn would randomly lock and unlock.... now all better...
Click to expand...
Click to collapse
Yep, that did the trick for me too. I had to get that keyboard fix the other day, since my T, E, I, and Fn keys would either register double/triple hits or just work whenever they wanted to. If anyone is also having an issue with some programs only registering all keyboard key hits as symbols rather than letters, this will fix that too.
maskedlion said:
I have the same issue with 3.2.0, never used 3.1.6, but I had the issue from scatch with both ROM and Kitchen builds. The biggest one for me is that I can't get the "()" keys to work and all of my contacts info has to have them around the area code due to the CIM software I have to use for work...
Click to expand...
Click to collapse
I had the same issue - I used the kitchen to build my rom - I generally do my "settings" - (screen brightness, owner info, etc) before I add ANY .cabs and noticed this issue. What was funny, however, was after a soft reset (after installing one of my programs) it went away, so I never really gave it another thought.
thaaankk youuu (arrgh) thaankyou (dammit) ......install cab file...... thank you thank you thank you!!! (fu**ing EH!!! no more on screen keyboard woo-hoo..)
Thanks for the cab. I noticed it with whatever version I had before DCD3.2.0 (I want to say 3.0.4 but I could be wrong). I was starting to wonder if it was somehow related to the radio 3.39.10.
This issue has been around for the entire life of the phone. UTStarcom actually provides the fix in their downloads section for the xv6800.
http://handsets.utstar.com/view_phone_details.aspx?mcode=XV6800&bID=89&sAct=0
mine did this, but also my o, p, and l keys wouldnt register unless phyiscally pressed very hard. then would register like 3 times.
i thought it was something physically wrong with the phone and just got a brand new replacement in the mail today.... ooops
First time I have ever seen the VZW version... Glad I am on Sprint
gc14 said:
This issue has been around for the entire life of the phone. UTStarcom actually provides the fix in their downloads section for the xv6800.
http://handsets.utstar.com/view_phone_details.aspx?mcode=XV6800&bID=89&sAct=0
Click to expand...
Click to collapse
gc comes through again!!!!! even after using the first posted fix in this thread i noticed it was still happening. then, after following gc's link PRESTO!! THE PROBLEM IS GONE!!! THANKS MAN
krazycanuck82 said:
gc comes through again!!!!! even after using the first posted fix in this thread i noticed it was still happening. then, after following gc's link PRESTO!! THE PROBLEM IS GONE!!! THANKS MAN
Click to expand...
Click to collapse
I followed the link and when I tried to download it gave me the whole page cannot be found error. Anyone know if this is just temporary? Or anywhere else I can download this?
fozmsu said:
I followed the link and when I tried to download it gave me the whole page cannot be found error. Anyone know if this is just temporary? Or anywhere else I can download this?
Click to expand...
Click to collapse
This is the .zip file directly from the UTStarcom site. I downloaded it the other day and never deleted it lol.
daddymac117 said:
This is the .zip file directly from the UTStarcom site. I downloaded it the other day and never deleted it lol.
Click to expand...
Click to collapse
Thanks. Much appreciated
too much was messed up in this rom, and it was removed.
thanks everyone who helped clear up bugs.
this entire thread is just fixes to a release that was quickly backed out. mods, can we move this to trash?
3.2.5 is now here: http://forum.xda-developers.com/showthread.php?t=413039
DCD, how will I ever manage to stop flashing my phone if you keep putting out new ROMs with more and more precious free memory?
I better hurry up and figure out one of these autoinstallers so I don't have to spend 2 hrs reinstalling everything after a flash. You're making me fail out of school
J/K, great work on the ROMs!!
Edit:
I'm not sure if it was intentional or not but your screenshots appear to be from 3.2.3, not 3.2.4. (CE OS version and ROM version numbers)
I've been eagerly waiting for this..
Thanks DCD
I have kinda been waiting for this, along with some other updates coming soon....
Great work, I think I will go try it out!
Just curious why you are using radio 3.42.02 instead of 3.42.30
Thank you!
wow, you are amazing
I just got my phone the way i like it (like an hour ago) and poof a new version comes out.
thanks again for all your work.
I'm also curious about your Radio version....
does this version fix the the call waiting tone/alarm??
i think the keyboard is setting itself to really short repeat rate.
start -> settings -> buttons -> up/down control -> delay before first repeat
move it back to the middle and the kb should act better. ill fix this later.
i cant reproduce the call waiting sound anymore so its probably fixed within all the phonecanvas changes.
dcd1182 said:
i think the keyboard is setting itself to really short repeat rate.
start -> settings -> buttons -> up/down control -> delay before first repeat
move it back to the middle and the kb should act better. ill fix this later.
i cant reproduce the call waiting sound anymore so its probably fixed within all the phonecanvas changes.
Click to expand...
Click to collapse
Flashing as i type
I noticed that u added no2chems nueusb app, just cuious as to why
five40 said:
I noticed that u added no2chems nueusb app, just cuious as to why
Click to expand...
Click to collapse
I think that is a real slick addition to the rom ... works better for me than WM5orage
Didnt 3.2.3 have 25MB free? I never see the actual number, everything installs on the first boot with UC.
five40 said:
I noticed that u added no2chems nueusb app, just cuious as to why
Click to expand...
Click to collapse
i did? oops. it was by accident.
edit: i am reuploading a correct .rar
dcd1182 said:
i did? oops. it was by accident.
edit: i am reuploading a correct .rar
Click to expand...
Click to collapse
Oh ok, I was just about to say that it's not working
five40 said:
Oh ok, I was just about to say that it's not working
Click to expand...
Click to collapse
no, it was working. but i removed it. just download the kitchen again.
dcd1182 said:
no, it was working. but i removed it. just download the kitchen again.
Click to expand...
Click to collapse
care to share the working OEM I keep getting user.hv errors even when that's the only oem i'm trying to add
five40 said:
care to share the working OEM I keep getting user.hv errors even when that's the only oem i'm trying to add
Click to expand...
Click to collapse
open up the .rgu file in the folder and make sure that is an empty space at the bottom of the the page (last line is blank).
Thanks! I'll flash soon as I redo my SDConfig...
Just reminder it's good idea to bakup your SDConfig file if you spend time on it!
Is there any 23041 ROM for touch pro yet? i heard there are a lot of changes in this build of ROM... I saw ppl with 23041 On their Touch Pro too... But No 1 uploaded any of it yet.
coudln't find anything so far either...
D-FRESH-EST Rom Build 23041 [TP/FUZE Rom] BY herg62123 http://www.mobilitydigest.com/forums/showthread.php?t=1455
anyone tried the rom yet?
bertrandno7 said:
anyone tried the rom yet?
Click to expand...
Click to collapse
So far so good... Just finishing my usual setup after flashing a ROM and first impressions are very good. Will be doing more testing as the day goes by. I recommend thus far..
i shall FLASH!
okay cause theres like no screenshot at his post i shall flash it now then post my review soon excited... downloading...
mchapman007 said:
D-FRESH-EST Rom Build 23041 [TP/FUZE Rom] BY herg62123 http://www.mobilitydigest.com/forums/showthread.php?t=1455
Click to expand...
Click to collapse
I just flashed it is amazing, quick and stable.
Zsocee
hello
Zsocee said:
I just flashed it is amazing, quick and stable.
Zsocee
Click to expand...
Click to collapse
hello do you face any problems trying to copy your contacts over? And i noticed the spacebar is replaced with a "_" thats weird....
EDITED: CONTACTS ARE AUTO COPIED OVER
bertrandno7 said:
hello do you face any problems trying to copy your contacts over? And i noticed the spacebar is replaced with a "_" thats weird....
EDITED: CONTACTS ARE AUTO COPIED OVER
Click to expand...
Click to collapse
No problem with the contacts, syncronized with outlook without any issue...
I just setup my keyboard, let see...
bertrandno7 said:
hello do you face any problems trying to copy your contacts over? And i noticed the spacebar is replaced with a "_" thats weird....
EDITED: CONTACTS ARE AUTO COPIED OVER
Click to expand...
Click to collapse
no issue with the keyboard either. have you changed the layout from fuze to touch pro?
Zsocee said:
No problem with the contacts, syncronized with outlook without any issue...
I just setup my keyboard, let see...
Click to expand...
Click to collapse
alright i tried looking for ways to fix it but to no avail
another
Here's a test release, 23041. It's buggy but has m3d2.1 and the tachi dialer, by the guy who makes TCP. Stress that it's a test.
The ROM from the other site is pretty good. after changing the settings, its perfect, fast and smooth, but i seem to be having a problem with Wif... like every 1min it disconnects, but i like it that way, it saves power
Seems like some people have problem sending sms with this build?
http://forum.xda-developers.com/showpost.php?p=4460710&postcount=3081
Wow.
I'm completely smitten with this ROM. Quick, beautiful...very happy.
Sent my first two SMS, looks good on my end (no idea if they got them though...).
Start menu is a bit messy, but eh? To each their own.
3daysaside said:
I'm completely smitten with this ROM. Quick, beautiful...very happy.
Sent my first two SMS, looks good on my end (no idea if they got them though...).
Start menu is a bit messy, but eh? To each their own.
Click to expand...
Click to collapse
I am still working on grouping the icons like natf and nrg has thier roms
it is a work in progress still so bear with me on the messy startmenu for it will be fixed in future releases
herg62123 said:
I am still working on grouping the icons like natf and nrg has thier roms
it is a work in progress still so bear with me on the messy startmenu for it will be fixed in future releases
Click to expand...
Click to collapse
Great work as always.
Billun said:
Seems like some people have problem sending sms with this build?
http://forum.xda-developers.com/showpost.php?p=4460710&postcount=3081
Click to expand...
Click to collapse
i dont have this issue on my device with this rom i made
Anyone have trouble getting GPS to work? Can't seem to get Google Maps to find any satellites. I have enabled A-GPS
Verizon
Has anyone tried this on a Verizon phone. I know they are separated other places.
First off, thanks to kmeta for the registry edit that allows wifi to stay on when the device is in standby (can be found here).
The problem with that registry change is that it resets itself at reboot so that wifi turns off in standby again. Since this was a pain to have to keep modifying, and the only other solution in the above thread meant using MortScript, I threw this little app together. It simply runs at startup and sets the value of the registry key.
If it doesn't work on your device then it probably means that the registry change is device specific, but I don't believe it is. Please let me know if it doesn't work and we can take it from there.
Edit:
Note, even though the app only runs at startup, the cab file makes the registry modification so you don't have to restart after an install.
Thank you, will try it on my HD2!
Does it close itself entirely after changing the reg on startup?
barty22 said:
Thank you, will try it on my HD2!
Does it close itself entirely after changing the reg on startup?
Click to expand...
Click to collapse
Yes, it doesn't stay running. It literally makes the registry change and then shuts down - it's all it needs to do.
Works great! Thanks a lot
FYI, 'manually' changing the wifi in standby registry key on my HD2 with BSB Tweaks or HD2Tweak doesn't work for me. Even when doing it every time after a soft reset, wifi just won't stay connected after some time in standby mode. With this little app it simply works.
I wonder what it does different?
barty22 said:
I wonder what it does different?
Click to expand...
Click to collapse
I can only assume that it's using a different registry key - don't know.
Glad it works for you anyway
barty22 said:
Works great! Thanks a lot
FYI, 'manually' changing the wifi in standby registry key on my HD2 with BSB Tweaks or HD2Tweak doesn't work for me. Even when doing it every time after a soft reset, wifi just won't stay connected after some time in standby mode. With this little app it simply works.
I wonder what it does different?
Click to expand...
Click to collapse
That might be the cause, because BSB Tweaks only makes the registry changes when you soft reset which does nothing in this case, because the key is gone again after a soft reset.
Anyway, thanks for that nice CAB. I have yet to try it, but I am already saying thanks in advance and will post my results after I had the chance to test them tomorrow at university.
DaveLeh said:
That might be the cause, because BSB Tweaks only makes the registry changes when you soft reset which does nothing in this case, because the key is gone again after a soft reset.
Anyway, thanks for that nice CAB. I have yet to try it, but I am already saying thanks in advance and will post my results after I had the chance to test them tomorrow at university.
Click to expand...
Click to collapse
Thanks DaveLeh. Just out of curiosity, what phone do you have? I know for sure it works on the HD2, but would be interested in finding out the results on a wide range of devices.
johncmolyneux said:
Thanks DaveLeh. Just out of curiosity, what phone do you have? I know for sure it works on the HD2, but would be interested in finding out the results on a wide range of devices.
Click to expand...
Click to collapse
Unfortunately (well, at least for you, not so for me) I have a HD2, too. It's really quite the device.
DaveLeh said:
Unfortunately (well, at least for you, not so for me) I have a HD2, too. It's really quite the device.
Click to expand...
Click to collapse
Ah well - the more the merrier anyway!
And yes, yes it is quite the device
johncmolyneux said:
First off, thanks to kmeta for the registry edit that allows wifi to stay on when the device is in standby (can be found here).
The problem with that registry change is that it resets itself at reboot so that wifi turns off in standby again. Since this was a pain to have to keep modifying, and the only other solution in the above thread meant using MortScript, I threw this little app together. It simply runs at startup and sets the value of the registry key.
If it doesn't work on your device then it probably means that the registry change is device specific, but I don't believe it is. Please let me know if it doesn't work and we can take it from there.
Edit:
Note, even though the app only runs at startup, the cab file makes the registry modification so you don't have to restart after an install.
Click to expand...
Click to collapse
thank you for your pretty good works.
doesn't work
Xtanny rom 1.9 WM 6.5 HTC HD
Mesho.112 said:
doesn't work
Xtanny rom 1.9 WM 6.5 HTC HD
Click to expand...
Click to collapse
It should be fine, since it's running WM 6.5. Maybe it's something to do with the custom ROM you're using. Does it have any power saving features? Do you have any 3rd party power saving software that could shut down Wifi? Maybe HDTweak, as I believe that has an option to do the same as this program.
johncmolyneux said:
It should be fine, since it's running WM 6.5. Maybe it's something to do with the custom ROM you're using. Does it have any power saving features? Do you have any 3rd party power saving software that could shut down Wifi? Maybe HDTweak, as I believe that has an option to do the same as this program.
Click to expand...
Click to collapse
what about MortScrip I don't have it maybe this is the reason !
I'll give it try with MortScript and feed you back ..
Mesho.112 said:
what about MortScrip I don't have it maybe this is the reason !
I'll give it try with MortScript and feed you back ..
Click to expand...
Click to collapse
It doesn't use MortScript mate - that's not needed. Still trying to think what could be the problem.
it worked and don't know how it just fixed *lool*
Thanks johncmolyneux for this helpful app ..
Mesho.112 said:
it worked and don't know how it just fixed *lool*
Thanks johncmolyneux for this helpful app ..
Click to expand...
Click to collapse
You're welcome mate. Glad you got it working
Thanks!
Works great so far on my TMO TP2 with stock 6.1 ROM.
-Linc
seems like another a must have "cab"
i will install and test it out, will come back to you with my experience
thanks
lmyers33 said:
Works great so far on my TMO TP2 with stock 6.1 ROM.
-Linc
Click to expand...
Click to collapse
Thanks man - good to know
queer~dude said:
i will install and test it out, will come back to you with my experience
thanks
Click to expand...
Click to collapse
Thanks queer. I look forward to that
my report
johncmolyneux said:
Thanks man - good to know
Thanks queer. I look forward to that
Click to expand...
Click to collapse
first off, thanks for making this little apps. Unfortunately, this apps cannnot work my my Rom TESS_V2.F WWE, Radio Version 4.49.25.17 OS 2.2.21054(Build21054.1.6.7)
thanks
hello,
after many many tries, i have found the mix for running android perfect!
on my phone
http://forum.xda-developers.com/showthread.php?t=819081
i have added files, so that everything you need is here, also its for me
easier to find it back
what doesnt work:
camera
http://forum.xda-developers.com/showthread.php?t=819082
martijnwijngaards said:
hello,
after many many tries, i have found the mix for running android perfect!
on my phone
http://forum.xda-developers.com/showthread.php?t=819081
i have added files, so that everything you need is here, also its for me
easier to find it back
what doesnt work:
camera
Click to expand...
Click to collapse
Hem....Well done martijnwijngaards >>>>
Hakim Rahman said:
Hem....Well done martijnwijngaards >>>>
Click to expand...
Click to collapse
i am not a developer, just a tester haha
it's a beginning a sport
Too bad I no longer owned a Nike
I have to take a look on Marketplace
Rataplan said:
Too bad I no longer owned a Nike
I have to take a look on Marketplace
Click to expand...
Click to collapse
Haha yeah, bought mine for 25 euros on marktplaats
I use this phone more now than my 'normal' one
greetings
martijnwijngaards said:
Haha yeah, bought mine for 25 euros on marktplaats
I use this phone more now than my 'normal' one
greetings
Click to expand...
Click to collapse
I'll think I have to go for it, I have a lot of things unfinished in this forum.
Greetz,
http://forum.xda-developers.com/showthread.php?t=819082
testing all languages
anyone an idea how to remove languages?
martijnwijngaards said:
hello,
after many many tries, i have found the mix for running android perfect!
on my phone
http://forum.xda-developers.com/showthread.php?t=819081
i have added files, so that everything you need is here, also its for me
easier to find it back
what doesnt work:
camera
Click to expand...
Click to collapse
I download and unzip root.zip,copy the files on the root of my SD card,
when I download and unzip Fat+Free+RLS5+-+odex.zip, I got a file named androidinstall.tar, is it not be namde "syste.img" or "system.sqsh"? how to install it?
Bluetooth and headset work?
Tivoli said:
I download and unzip root.zip,copy the files on the root of my SD card,
when I download and unzip Fat+Free+RLS5+-+odex.zip, I got a file named androidinstall.tar, is it not be namde "syste.img" or "system.sqsh"? how to install it?
Click to expand...
Click to collapse
make a map called: andboot
place the androidinstall file in that map
the other files in the zip place it in the root of sd card
then:
start haret, press run
hold down te volume up button
in the menu:
press installsystem
when it's finished press quit
android will start
greetings
NikiRurk said:
Bluetooth and headset work?
Click to expand...
Click to collapse
Just tested, bluetooth not working...
I have not the knowhow to fix that, not yet...
Im a newbie with this
.
what batterylife are you guys getting with this android version?
how many hours?
martijnwijngaards said:
Just tested, bluetooth not working...
I have not the knowhow to fix that, not yet...
Im a newbie with this
.
Click to expand...
Click to collapse
Unfortunately there is no developper left with a Nike to fix the kernel (zImage) in order to get the followings things working:
- volume control whithin calls
- vibration
- bluetooth
- camera
The rest runs perfect and overclocking the device to 530mhz makes the Nike with Android such a cool device that maybe one day a developper gets one (they are so cheap to buy) and does the fixes.
Let's wait and hope...
ybinnenweg said:
what batterylife are you guys getting with this android version?
how many hours?
Click to expand...
Click to collapse
After a charge during night, with normal usage during the day (I use it for the job 4 calls, a bit of apps like facebook, twitter and news) I am left before going to bed with about 40-30 % when charging again.
Battery good, like the other post..it depends how much you do data
.
Is there a way to Change the resolution?
nerke said:
Is there a way to Change the resolution?
Click to expand...
Click to collapse
Just edit "width=320 mddi.height=480" in default.txt
Hi all i cant turn on usb storage...i installed HTC Sync but no good....
Im using windows 7 64bit
incoming calls
when someones calling you do you have any problems that the other party is not hearing you but you can hear them?
Luks24 said:
when someones calling you do you have any problems that the other party is not hearing you but you can hear them?
Click to expand...
Click to collapse
yes i face the same problem but not always....there is single tone sound when this happen....