MDA Compact V cradle - Touch Diamond2, Pure Accessories

Hi,
I recently bought a MDA Compact V and now I would like to buy a cradle for it. However, I'm not sure about one thing - are those things universal or not?
I know that MDA Compact V is physically the same as the AT&T HTC Pure (right?) so I guess that I can go for some made for it, but will it fit into a cradle made for the Diamond2? Or any other model?

I bought the Brodit car cradle & it fits my MDA Compact V perfectly

What about desktop cradles?
Could anyone compare the bottom parts of the Diamond 2 and MDA Compact V? Are they the same dimensions? And could that usb cover be a problem?

Related

Brodit HTC TyTn etc Holders now shipping

Hi Guys,
Just to let you all know that Brodit have released the following TyTn Holders:
Passive Holders, both portrait 848690 and landscape 848691 (with keyboard exposed)
Active holders -Portrait 968690 & Landscape 968691 inc. cig lighter charger
Molex Active holders - portrait 971690 & Landscape 971691- using Molex hardwired open cables for fixed installations and powering GPS units with Molex adapter lead.
To view & buy etc, just type the code into the search box at:
www.dsldevelopments.com
Thanks all,
Bryson
Hi Guys,
Had a lot of questions regarding the Brodit holders for the network carrier variants of the HTC TyTn, and what the Brodit TyTn holders fit:
the range for the HTC TyTn fit the folowing devices:
HTC Hermes - SPV M3100, MDA Vario II, HTC TyTN, XDA Trion, Dopod 838 Pro, i-mate JASJAM and Dopod CHT 9000.
At present we only have the holders available by Brodit listed under the HTC TyTn name, but if yours is one of the above, then the TyTn holders on www.dsldevelopments.com should fit!
Hope that helps all,
Cheers,
How do you put the tytn in the horizontal holder? Does it just slide down? Do you have to connect the cable manually? Is it possible to hook up external speaker/mic with this holder or is it for charging only?
Tony K. said:
How do you put the tytn in the horizontal holder? Does it just slide down? Do you have to connect the cable manually? Is it possible to hook up external speaker/mic with this holder or is it for charging only?
Click to expand...
Click to collapse
Hi Tony K,
Yes you just slide it down into the holder. Yes you have to place the cable in manually for the Horizontal holders (codes ending in ***961) the Portrait versions slid in and dock onto the usb connector (codes ending ***960)
As with all USB devices from HTC it only charges, you need a bluetooth carkit like a parrot kit to get the full benefits of a phone kit in your car, ie additinal mic and audio out through your speakers,
Many Thanks
Bryson
I use the vertical brodit holder with plug for lighter connector. It works great and holds the Tytn securly in place.
i keep on getting dns error when im trying to view ur page. maybey work filter

car cradle

hi there
i had the xda mini s cradle by brodit but im needing the front cradle part for the TyTN. anyone got any experience of this? or does it exist yet as i cannot seem to find one?
errmm.... i'm sure someone has posted a link to a site offering these...
Brodit HTC TyTn etc Holders now shipping
Or if you need a few more places that sell them in the UK then here they are:
Clove Technology - TyTn Car Holders
MobileFun Tytn - Car Holders
Inkino - TyTn Accessories
GPSforLess - TyTn Accessories
cheers for the info!

Pouch for MDA Compact V like the HTC PO S390?

Hello fellow Diamond-Lovers!
I just ordered my MDA Compact V, and the dude from T-Mobile mentioned that there will no pouch included in the package. Well that sucks, but we need to carry on right? For my MDA Compact IV (HTC Diamond) I had the HTC PO S390 pouch:
View attachment 180874
Does anybody know if there is a version like that suitable for the new Diamond? I like the style of that pouch very much, it is unfortunately too small for the new baby.....
Studebaker
What they need is simple, classy pouch with a side cut, like the one that comes standard with the Nokia E71.
See previous thread....
http://forum.xda-developers.com/showthread.php?t=506785
Hello fellow Diamond-Lovers!
I just received my MDA Compact V, and guess what? It came with a pouch similar to the HTC PO S390 pouch. Difference is the size of course, and it has no HTC logo on it.
Cheers, Studebaker
Please delete, double post.
Rubber / Silicone Case for MDA Compact V
Hi
Have had my mda compact v for a few weeks now and have been having terrible trouble finding a rubber/silicone case to protect my phone. There are lots for the 'proper' htc touch diamond2 but almost none for the mda compact v. I know they supposedly have the same dimensions but they are shaped differently. Does anybody know where I can get one in UK/Europe - anywhere really? Have tried using the US name htc pure and found some garish coloured ones in US that cost vast amounts to send to Europe.
Any help much appreciated.
Studebaker72 said:
Hello fellow Diamond-Lovers!
I just received my MDA Compact V, and guess what? It came with a pouch similar to the HTC PO S390 pouch. Difference is the size of course, and it has no HTC logo on it.
Cheers, Studebaker
Click to expand...
Click to collapse
Hi,
Mine came with one of these too but they are of not great quality. The leather at the end splits over time.
I replaced mine with a D2 leather case of eBay.

T-mobile Compact V Car kit?

Hi, this weekend i got my t-mobile version of the Diamond2, named as the Compact V. The design is different from the Diamond2, unlike my previous phone (Compact IV, t-mobile version of the diamond) the design is in my opinion worse than the original... It's all black, no metal finishes and gives a more plastic feeling. The most annoying part is that they placed a little removable cover at the bottom where the mini-usb port is placed. You always have to remove the cover to connect an cable.
This will give problems using a car cit; it won't be possible to slide it in becouse you first have to open the cover, after that it will be in the way...
At the sides of the usb port you can look 'inside' the phone, it's not closed at the sides so i find it tricky to remove the cover as all kind of dirt and dust can get inside the phone...
Does anybody have an solution for this? I looked at ebay for replacement housing but that only will cost me about €50, and i'm not sure if all the buttons will fit exactly...
Interesting! Searching for a Car Kit too (and some solution for the USB-Cover)..
BTW. this cover also makes it nearly impossible to use my stylish HTC-desktop-cradle..
This Design wasn't the best idea from T-Mobile^^
i just sent t-mobile a question about this issue. They chose a strange solution in my opinion. The compact IV looked a lot better than the original, and now they come up with this plastic cheaper looking phone, with holes at the side of the usb port... strange design.
Your're right dude! You speak out what I think^^
ok, now that's two of us... I'll await the reaction from T-mobile
Hey Hellboy.
What do you think, could this fit for our devices too?
I bought a car cradle designed for the Diamond1 for my MDA Compact IV and had to modify it a bit to fit my device... Do u think this would be necessary here too?
It's not what i'm searching for, i can buy an universal car holder everywhere... The active car kit i bought from Adapt for my mda compact IV worked perfect; voice and navigation commands come over the speaker and the phone is charged while in the holder. The same kit exists for the diamond2, but with the compact V we have the bloody cap...
http://www.adapt-mobile.com/mobile/detail.php?p_id=504
The one I posted is for Diamond2 only, not a universal kit.
Think I will try one for Diamond2 and test it for my MDA c V^^
[edit] I've bought this one.
Got the same for my MDA c IV and was very satisfied!
looks good, but still lacks the possibility i seek; hands free car kit and charging. Just slide the phone in an you're done. The one i posted has all these options, and worked fine on my compact IV...
Hey Hellboy,
did TMob ever answer your question?
Just curious... as I am also struggling to find a matching mount for my CV.
thx
Nope,
Never had any reaction... Great service!

[Q] Stylus for MDA Compact V?

I had a good google and can't find a replacement stylus for the Compact v anywhere. I've tried the Diamond 2 stylus and it sticks out about half a centimetre. Anyone know where they are available?

Categories

Resources