Hi All
Can someone please guide me how to convert the SYS folder,used in ervius kitchen,in BUILD OS KITCHEN's SYS folder.I have used one tool Convert_Sys.but it failed to convert dpi96 and dpi_resv folders.
any help will be highly appreciated.
thanks in advance and regards
deepankerjha said:
Hi All
Can someone please guide me how to convert the SYS folder,used in ervius kitchen,in BUILD OS KITCHEN's SYS folder.I have used one tool Convert_Sys.but it failed to convert dpi96 and dpi_resv folders.
any help will be highly appreciated.
thanks in advance and regards
Click to expand...
Click to collapse
Are you trying to convert from a dumped SYS or one that has the Ervius Kitchen folders (shared and dpi folders)??
If you are going from EK to old style kitchen, then simply copy all the folders from within the shared and dpi folders into a folder called SYS. so shared\common and shared\0409 (for WWE) contents and dpi_96\common and dpi_96\0409 contents, etc into the SYS folder and then it can be used in the old style kitchen.
I hope this has answered your question and not confused the matter
DT
Problem
Thanks for ur guidence dt
but the point is,i had been doing the same as u said.but when the BuildOS runs...it stops and the error report says "the file 'temp\dump\_skip' already exists.
when i removd all the _skip files from all the folders,it complets the run.but the rom doesnt boot.and stops at start.
can u plz tell me,what can be the problem.
regards
in sys folder seach _skip file and delete all files, in old stile kitchen yuo dont need of they
No boot up
Thanks Salvy
When i delete d _skip files,the rom doesnt work.it goes up to showing the details of radio and rom version,and thats all.it doesnt go beyond that.what should i do?
deepankerjha said:
Thanks for ur guidence dt
but the point is,i had been doing the same as u said.but when the BuildOS runs...it stops and the error report says "the file 'temp\dump\_skip' already exists.
when i removd all the _skip files from all the folders,it complets the run.but the rom doesnt boot.and stops at start.
can u plz tell me,what can be the problem.
regards
Click to expand...
Click to collapse
It may be your XIP(ROM), not the SYS. Yes you would have to remove the _skip files, as they are only for the EK setup. I used to use the BuildOS up until Insomnia 2.xx, then I switched to the EK and found it so much easier to build a ROM.
How are you porting the XIP??
DT
Mreloc
Thanks for ur response Dt
I also use ervius kitchen only.Just was trying the OS kitchen.I use mreloc for xip porting.eveything seems normal,but the rom doesnt boot boss.will have to give up the OS kitchen, i guess.
can u plz guide me how can i port the xip properly.
regards
Related
main kitchen tools made by faria
base rom is a mixture of several roms
rapidshare link Charmer Kitchen
some extra OEM packs OEM pack
this are OEM packs I got from the wizard forum so I take no credit for them
download and extract
do not delete anything in SYS folder that you don't know what it does
OEM folder you can add things and delete things you don't want...
ROM folder most be untouched same with tools folder they are there for building the OS
start BuildOS and choses what apps you want and press the green play button and wait for it to finish.. it will make a folder called temp
now press CreatROM and wait for it to finish if there is any error then you have included to many apps in the BuildOS then you most go back to BuildOS step and remove some app
if no error then go to the temp folder and flash the OS.nb file to your phone
I'll upload an other zip later with much more OEM pack that you can use in building you custom rom....
Is it possible to put some other rom in the ROM folder? like the Essentials rom from nocturne? Would it work?
(I'm pretty new to all of this,sorry for dumb questions )
you can use also my rom for cooking - the only problem is that i'm lazy to release my own kitchen - it needs some cleanup, files there are in terrible mess but i promised to release it, i must do so once...
And would that resolve the driver issue? Like bluetooth and camera? Or would i also have to change something in the SYS folder?
Hi guys
As you might know I do not have a charmer myself.... but it way pointed out to me by anja31.. that one of my roms that I made for Prophet did work for Charmer...
So I downloaded nocturne's wm6 rom added some of my stuf and then made a rom for that anja31 tried and found that it worked but hat problem with bluetooth so what I did is I replaced the bluetooth dll's from nocturne's rom with the once I have.....and if the camera from nocturne's rom worked before then I should also in this kitchen.
Yes you can change the content of ROM folder if you know what you are doing
but now have fun and make some wm6 roms for charmer
Thanks for the kitchen gullum ! I'll play with it & report back. You revived the "Charmer-Scene" for me, thanks for your work.
Frtzrwk said:
Thanks for the kitchen gullum ! I'll play with it & report back. You revived the "Charmer-Scene" for me, thanks for your work.
Click to expand...
Click to collapse
Yes, well said!
Gullum at it best...
good to see that there is a guy who gives full support for a product he doesn´t have...
Thanks for your time and energy.
I will try the kitchen tonight
greets from germany
Gullum can you upload WM6 Prophet 5 BETA Base for Kitchen?
BTW, I tried Kitchen and it works!
Many Thanks Gullum for 1st kitchen for Charmer
adexxx said:
Gullum can you upload WM6 Prophet 5 BETA Base for Kitchen?
BTW, I tried Kitchen and it works!
Many Thanks Gullum for 1st kitchen for Charmer
Click to expand...
Click to collapse
I don't have the beta version as I have moved on to next version but mostly everything from the rom is included in the kitchen
charmer kitchen
Hi is it posible for someone to post a new link as the rapidshare is not working
for me "cannot find server" message I have an old charmer and would like to have a play maybe i can learn something along the way thanks in advance Swampy395
New Kitchen for HTC Gene
About the Kitchen
Language: WWE
Based on build 20931 (xip and sys);
Some oems from original Gene ROM (Camera, OEMDrivers). Rest from New Manilla 2D Elfin ROM;
Graphical interface;
Full automated. Remove or insert files and click <Build> to generate a new rom
Prerequisites
Microsoft Visual C++ 2008 Redistributable Package
.NET Framework 2.0
Instalation
Simply unpack the file to any folder on your pc and run GeneKitchen.exe
How to use
Change OEM and SYS as you like
Choose a folder to save your new ROM
Choose new or old gene
Click build and wait process terminate
Flash ROM to your device
Have fun
if you build without modifications you have: 62.97MB of storage and 51.37MB of ram (about 27MB free)
Observations
For old Gene (HT7xx) this rom works very well. For new ones (HT8xx) needs to be tested.
-------------------------------------------------------------------------------------------------------------------------------------------------------
Download (OLD GENE) Link:http://www.4shared.com/file/77988622/94e6f818/Gene_Kitchen.html
Download (NEW GENE) Link: http://forum.xda-developers.com/showpost.php?p=3125736&postcount=18 thanks to krazy_about_technology.
--------------------------------------------------------------------------------------------------------------------------------------------------------
This kitchen is only possible thanks to XDA. Thanks to all
Thanks to krazy_about_technology and Ankit360 for modifications and testing in the kitchen for the new genes.
sorry for any mistake. English is not my native language
If you like my work buy me a beer
thank i will try this
ramersonw said:
New Kitchen for HTC Gene
About the Kitchen
Language: WWE
Based on build 20931 (xip and sys);
Some oems from original Gene ROM (Camera, OEMDrivers). Rest from New Manilla 2D Elfin ROM;
Graphical interface;
Full automated. Remove or insert files and click <Build> to generate a new rom
Prerequisites
Microsoft Visual C++ 2008 Redistributable Package
.NET Framework 2.0
Instalation
Simply unpack the file to any folder on your pc and run GeneKitchen.exe
How to use
Change OEM and SYS as you like
Choose a folder to save your new ROM
Choose new or old gene
Click build and wait process terminate
Flash ROM to your device
Have fun
if you build without modifications you have: 62.97MB of storage and 51.37MB of ram (about 27MB free)
Observations
For old Gene (HT7xx) this rom works very well. For new ones (HT8xx) needs to be tested.
Download Link:http://rs564.rapidshare.com/files/177549829/Gene_Kitchen.rar
This kitchen is only possible thanks to XDA. Thanks to all
and sorry for any mistake. English is not my native language
If you like my work buy me a beer
Click to expand...
Click to collapse
i got the following error
Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Hi Ramersonw,
That was fast man, you did it! First of all, let me congratulate and thank you for your great work. It was really nice of you to take time out of your schedule and make the very much needed kitchen for gene. Thanks a lot! It really must have been some hard work. Atleast somebody took the initiative to do it.
Now coming my experience with it. I have a P3400i (New Gene) with Onbl 1.17.000 and SPL 1.07.Oref (patched).
I, for obivious resons selected the "New Gene" radio button while building the ROM. As my first experience with it, i tried to build the ROM with default settings, just added back the Transcriber packages to the OEM part.
At first, the process started and BuildOS built the files, but on the registry part it gave an error building the main registry hives. I looked at the log file in dump folder and it listed a .rgu (registry setting) file missing which, on checking , i found that is present in the XIP_OLD folder but not in XIP folder, so i copied the file from there to the XIP folder and tried again. Bingo! it worked, G'Reloc ran and then the htcrt tool merged the OS_new.nb and extrom.nb successfully.
For people who are experiencing the registry error, please look at the log file in dump folder which is automatically created during the build process and look at the last line where it is saying that xxxxxxx.rgu file is missing. Find that file in the folder where your kitchen is. It will be in some XIP_NEW folder, copy it to the adjacent XIP folder.
After that, when i flashed the ROM to my phone, it flashed completly fine to 100% and the RUU tool showed No Error. But after that, phone was hung on the HTC splash screen/boot screen. It is showing the Onbl, spl, radio and OS versions and after some time, the radio starts which is chracterised by the blinking of green LED. but it doesn't boots furthur. I checked for 20 mins.
I tried some combinations of packages as well but no avail. I think the problem is with the XIP as i have read many times on this forum, this problem happens whenever ppl flash invalid XIP partition to the device. And after radio initialization, i think the next thing that happens is the initialization of XIP area for loading the main parts of OS (i could be wrong, these are just my assumptions).
Also, if i select the Single Package option, the exe that does it gives and error and quits. But the build process continues even after that.
So, all in all the UI is great, its usable and pretty and we can talk about it later. First this issue needs to be ironed out.
What do say brother?
PS: I tried all these operations on Vista as well as XP Pro SP3.
hi people
Sorry for the broken link. I have some problems with rapidshare so i upload the kitchen to another server here (1st post updated too)
To krazy_about_technology
I made a few modifications to xip. Please test it. If not work this time send me the xip.bin or os.nb of any rom that works on your device (wm6.1). That way I could analise it and update kitchen. I can't test here because i have an old gene (HT7xx).
PS. Transcriber goes to SYS not OEM.
can u plz upload only modify xip.bin
here is xip.bin extract from GENE_wm6.1_19971wwe fusion9.0_new_gene
i dump this xip.bin and copy it to XIP_NEW but still doesn't boot furthur
thanks for reuploading
i'll give it a try
Thank You So Much I m Going To Try it With my New Gene
ankit360 said:
i dump this xip.bin and copy it to XIP_NEW but still doesn't boot furthur
Click to expand...
Click to collapse
Hey Ankit, that's not gonna work as the XIP is that part of the system that does not have to loaded into the RAM. The executables in this parts must be of the same CE OS build that the rest of the ROM is. These executables have their headers stripped off as no relocation of addresses takes place, that only happens when the file is loaded into RAM. So these files always run at fixed memory addresses.(This is as far as i know, i could be wrong). So Ramersonw will have to build the XIP from the same OS that he is using. He just wants the your XIP to look at it and figure out what needs to be corrected.
@Ramersonw: Buddy thanks for the quick response. I am downloading the file uploaded at new location. I hope this contains the changes you did. I'll try this and post here the details. The 4Shared site is very slow today, maybe because of the undersea cable cuts. I m getting only 7-14 KBps rite now
i download reuploaded file but still there is problem
Improved but the problem remains
Hi Ramersonw,
I tried the newly uploaded kitchen. The registry file problem is gone and the ROM building process is smooth now, but, the XIP problem remains as it is.
As ankit360 has posted the XIP of LomLom's fusion ROM, i am attaching with this mail, the XIP of WM 6.1 Stock ROM (look a like, actually). Its a very plain looking vanilla 6.1 ROM with quiet old CE OS and apps, but this one and lomlom's fusion both run fine on New Gene devices. I and many others like ankit360 have personally tested that. So please have a look.
Thanks and Regards
can u plz upload only modify xip.bin
here is xip.bin extract from GENE_wm6.1_19971wwe fusion9.0_new_gene
i dump this xip.bin and copy it to XIP_NEW but still doesn't boot furthur
Click to expand...
Click to collapse
Hi Ramersonw,
I tried the newly uploaded kitchen. The registry file problem is gone and the ROM building process is smooth now, but, the XIP problem remains as it is.
As ankit360 has posted the XIP of LomLom's fusion ROM, i am attaching with this mail, the XIP of WM 6.1 Stock ROM (look a like, actually). Its a very plain looking vanilla 6.1 ROM with quiet old CE OS and apps, but this one and lomlom's fusion both run fine on New Gene devices. I and many others like ankit360 have personally tested that. So please have a look.
Thanks and Regards
Click to expand...
Click to collapse
Hi Krazy and ankit360
I'll look these xip tonight. Thanks for the files. When i have a solution i'll post here.
Hi Krazy
I saw the xips. Problem appear to be missing files on xip. Both lomlom and the stock rom that ankit360 and you upload missing some files (*.rgu especificaly). I guess these ROM are protected.
To make this kitchen, I used an official rom from HTC (wm6.0 for old gene) as basis. So for the new genes I need an original xip (wm6.0) to port to new build and send to you for test.
If you or anyone have this ROM please upload to me.
Sorry 4 my english.
Here is the XIP you needed!
Hey Ramersonw,
Thats great! I am attaching herewith the XIP and BootXIP from Windows Mobile 6 ROM that comes with P3400i in Asia, India, ie. My Phone I think that will suffice for your needs.
hoping to see ya soon
to Ramersonw
can i use to build rom for me
i m using wm5
onbl 1.07.000
spl 1.07.000
radio 02.79.90
os 1.07.000
my serial no ht7xxxxxx
u have tested with ur device running on wm5 but ur onbl is 1.11.000
so what????
i can't take more risk because my device is out of warranty.plz tell me any thing!!!
thanks!!!!
Hi people,
Sorry for the lack of updates because I'm travelling. When I arrive I'll test more the kitchen and try to correct the errors (for new genes).
Again, this kitchen only works for the old Gene (for now). OBS. Tested on my device (HT7xx).
deepv84 said:
can i use to build rom for me
i m using wm5
onbl 1.07.000
spl 1.07.000
radio 02.79.90
os 1.07.000
my serial no ht7xxxxxx
u have tested with ur device running on wm5 but ur onbl is 1.11.000
so what????
i can't take more risk because my device is out of warranty.plz tell me any thing!!!
thanks!!!!
Click to expand...
Click to collapse
I tested on my device and the generated rom works very well.
The rom generated for my kitchen only have os.nb and extrom.nb, if any error occur and your device don't boot you only need to flash another cooked rom or the official rom without ipl/spl/radio.
Here is the link to the modified Ramersonw's Kitchen with my created XIP and some other packages. I request Ramersonw's to please include these links or a reference to this post in the first post :
Full Kitchen:
http://cid-988261b694475a67.skydriv...WinMobile/Kitchen/Gene Kitchen|_New|_Gene.exe
Only My Modifications:
http://cid-988261b694475a67.skydriv...gesOnly|_for|_NewGene|_Kitchen|_Ramersonw.zip
Please note that using the full kitchen or applying the given modifications will customize your kitchen for new Gene. Please use a seprate copy of the original kitchen to cook for old gene.
krazy_about_technology said:
Here is the link to the modified Ramersonw's Kitchen with my created XIP and some other packages. I request Ramersonw's to please include these links or a reference to this post in the first post :
Full Kitchen:
http://cid-988261b694475a67.skydriv...WinMobile/Kitchen/Gene Kitchen|_New|_Gene.exe
Only My Modifications:
http://cid-988261b694475a67.skydriv...gesOnly|_for|_NewGene|_Kitchen|_Ramersonw.zip
Please note that using the full kitchen or applying the given modifications will customize your kitchen for new Gene. Please use a seprate copy of the original kitchen to cook for old gene.
Click to expand...
Click to collapse
Was just trying out this kitchen. I am a total newb in this. Somehow, I am getting the attached error, whatever settings I try. If possible, any help please?
dheerajk27 said:
Was just trying out this kitchen. I am a total newb in this. Somehow, I am getting the attached error, whatever settings I try. If possible, any help please?
Click to expand...
Click to collapse
Prerequisites
* Microsoft Visual C++ 2008 Redistributable Package
* .NET Framework 2.0
????
Hi all,
I have been using the kitchen that jerpelea originally posted here for us and have been happily cooking ever since...but I would like to change to the new ervius kitchen and have done quite a bit of reading but still can't figure out the exact way to layout the kitchen for the Nike.
Can someone who is using this kitchen for the Nike please pm or post a link so that I can download it and look at how it is set up for the Nike?
If you need somewhere to upload it, pm me and I can give you a temporary ftp site I can access.
I am not being lazy, just trying to get my head around it
thanks in advance.
DT
hi,
i use the ervius for my nike to translate in german 0407.
i have downloaded newest kitchen here http://forum.xda-developers.com/showthread.php?t=469420
general informations: http://forum.xda-developers.com/showthread.php?t=521632
it is for raphael, but i do it this way for nike too.
4 a lite tutorial i have a link for you
http://anryl.freeforums.org/kitchen-multidevice-ervius-pictorial-t8.html
!!! you have to dump an ORIGINAL-ROM first.
happy testings...
Why don't you try a "simple" plateform rebuilder-based kitchen ?
Here's my toolset. Just copy your OEM, SYS and ROM folders in.
Then drag'n drop OEM on \TOOLSET\oem2ext.exe to convert packages to EXT packages (optional).
For ROM folder, look here : http://www.bepe80.com/test/1
Then launch build_rom.bat, chose your keys number and let's go
Well, why you don't download a full kitchen, for an example from Raphael section, and dump your oldschool cooked ROM with it? That#s the way I did it with my ROM!
Now I can cook both for Diamond and Nike with the same Kitchen!
thanks for the info guys, I will try and stick with the ervius one. I have dumped a ROM and it setup the base kitchen.
So more questions...
1. How do I convert my existing OEM apps into this new format?
2. does anyone use this to port xip's, as it seems I get an error when I try? I followed Sous-Chef's instructions, but get an error relating to dumpxip.bat and the xip.bin
thanks for your help
DT
1. look after oem2ext.exe, then drag'n drop OEM folder and all your packages named PACKAGE_<device or anything you want>_<package name> will be converted to EXT packages in \EXT\<device or anything you want>\<package name>_version.
If your packages are not named this way, they'll stay in OEM.
2. to easily port XIP, look here : http://www.bepe80.com/test/2, bepe is explaining how to upgrade XIP very, very easily (I can tell that's easy since I can do it ).
The new problematic is to convert your XIP in packages with packagebuilder by drag'n drop DSMs in it. Then the only part really needed to upgrade XIP is the MSXIPKernel folder, since OEMXIPKernel is device specific.
d_train said:
thanks for the info guys, I will try and stick with the ervius one. I have dumped a ROM and it setup the base kitchen.
So more questions...
1. How do I convert my existing OEM apps into this new format?
2. does anyone use this to port xip's, as it seems I get an error when I try? I followed Sous-Chef's instructions, but get an error relating to dumpxip.bat and the xip.bin
thanks for your help
DT
Click to expand...
Click to collapse
This is very strange with all the other xip.bin i was trying i was getting the same error importing xip, but now i dowloaded you SYS, extracted the xip.bin from os.nb.payload and it worked perfectly.
Okay looks like I have just about converted my kitchen to the ervius Visual one...just ironing out the last of the bugs and all is good.
thanks everyone for your assistance.
DT
d_train said:
Okay looks like I have just about converted my kitchen to the ervius Visual one...just ironing out the last of the bugs and all is good.
thanks everyone for your assistance.
DT
Click to expand...
Click to collapse
will u be uploading ur kitchen and maintaining it as this section needs help from you please
vjsxda said:
will u be uploading ur kitchen and maintaining it as this section needs help from you please
Click to expand...
Click to collapse
Yes I will be transforming the "Ported XIP & SYS for Cookers" thread over to a kitchen.
DT
Here iam referring to ervius visual kitchen for gene or opal.
Before making a rom we have a ext, oem, rom, sys folders in which all basic material contains after building a rom with the above folders we get a .nbh file.
Now i want to know whether it is possible to covert a cooked .nbh rom into its initiall stage that is .nbh to its respective folders?
jagan2 said:
Here iam referring to ervius visual kitchen for gene or opal.
Before making a rom we have a ext, oem, rom, sys folders in which all basic material contains after building a rom with the above folders we get a .nbh file.
Now i want to know whether it is possible to covert a cooked .nbh rom into its initiall stage that is .nbh to its respective folders?
Click to expand...
Click to collapse
no my friend..if the rom is protected one and that is in 99% of case u cant get anything....only rom for that is sumit pro 21046 nothing else...even if u r building your rom with vk rhen u will get it as protected
Then is it possible to make a unprotected rom?
Yes, if you use the old way to cooking. Using Ervius VK, all roms are protected.
Ok thanks but may i know any old style kitchen?
Almost all chefs are using VK so an old way kitchen is not easy to find. btw see here for a tutorial (This will work well with wm6.1, with wm6.5 maybe you have some problems)
Help
That tutorial is useful but again as u said that in wm 6.5 u may have some problems and iam mainly want to cook with the latest builds 28002.
I tried one awesome way i extracted a protected rom with nbh extract and got one file 00_OS.nb Then using ervius deprotector i tried to deprotect this .nb file and i was successful in that also but after deprotecting i tried to dump that .nb file using evk, nbhdump but they either stopped working or gave error. Any help would be appreciable.
Ervius deprotector doesn't work with all kind of protections. I've tested it and don't work in any rom that I have. Ask for a kitchen for that rom you want. Is better.
Why u want to make unprotected rom?
saurabh88 said:
Why u want to make unprotected rom?
Click to expand...
Click to collapse
Actually iam making rom for opal and for opal there is only one good kitchen that is evk which besfen ported from gene to opal. But the kitchen files has problem like in oem and ext whenever i cook a rom with XDA UC at first boot everything is alright but after the uc reboot home setting, comn manager and volume button dont works i asked besfen he suggested me to ask the other chief for there oem and ext package but reply from other cheif not yet reached so if i could dump there rom the kitchen problem would be solved.
jagan2 said:
Actually iam making rom for opal and for opal there is only one good kitchen that is evk which besfen ported from gene to opal. But the kitchen files has problem like in oem and ext whenever i cook a rom with uc at first boot everything is alright but after the uc reboot home setting, comn manager and volume button dont works i asked besfen he suggested me to ask the other chief for there oem and ext package but reply from other cheif not yet reached so if i could dump there rom the kitchen problem would be solved.
Click to expand...
Click to collapse
Post you SDCONFIG.txt file here, also let us know if you are using any other 1st boot user customizations and chef customizations techniques like ( XDAUC, RUNCC... etc ). It is most likely that your UC costumizations are getting overriden by some things.
Duron23 said:
Post you SDCONFIG.txt file here, also let us know if you are using any other 1st boot user customizations and chef customizations techniques like ( XDAUC, RUNCC... etc ). It is most likely that your UC costumizations are getting overriden by some things.
Click to expand...
Click to collapse
Sorry forgot to mention its actuall XDA UC now edited
may some dsm files missing or messed up..
I hope i can help u learn how to cook rom and makes it more easier!
1.Structure OF THE KITCHEN
ROOT OF THE KITCHEN-------
dump----> This will contan files dumped from ROM,like OFFICIAL ROMS.
OEM---->This folder contans all the OEM DRIVERS and OEM software
ROM\XIP\ ---->contain boot.rgu,don't mod or del it!
SYS -------->SYS of WM build
SYSNEW ------>TH SYS OF NEW version of WM building u will proting
temp ----->temp files,and ROM files u cooked are here
TOOLS --------->All tools that ness for cooking
XIPNEW ------>NEW XIP of WM version.there are two styles:XIP.BIN and MSXIPKernel.u can porting them by choose correct method in my bat command
reg&iniflashfiles_tools ------->Tools to edit reg files and initflashfiles.
HOW TO：
1、IF u don't want to Porting new version of wm and u just want to mod ,u can dump OFFICIAL rom.
TO DO：Place official ROM in root of kitchen，run "dump ROM.bat" and follow the instruction.when finished,u will find OEM AND SYS in DUMP\DUMP.Move them to root of the kitchen.and move xip.bin in dump to root of kitchen and rename it to xip_out.bin.Now,u can edit softwares in OEM and build as u like by run"Build ROM.bat"
2、IF u want to cook new version of WM build,just down load new SYS AND XIP file form somewhere like DFT.usually,u may only need these parts:COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 and XIP.
UNZIP COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 to SYSNEW folder,UNzip MSXIPKernel form XIP to XIPNEW folder then run"Build ROM.bat" and follow the guid.
Download:
F1_AUTO_KITCHEN.rar
Thanks for your kitchen, I will try it.
But I doubt that will the xip will work normally?
I think it's better to add some commands to delete the rubish during room cooking.
ffboy2009 said:
1、IF u don't want to Porting new version of wm and u just want to mod ,u can dump OFFICIAL rom.
TO DO：Place official ROM in root of kitchen，run "dump ROM.bat" and follow the instruction.when finished,u will find OEM AND SYS in DUMP\DUMP.Move them to root of the kitchen.and move xip.bin in dump to root of kitchen and rename it to xip_out.bin.Now,u can edit softwares in OEM and build as u like by run"Build ROM.bat"
Click to expand...
Click to collapse
Hi, in the extracted archive I don't find "dump ROM.bat" but "DUMP_flash.bin.bat".
However when I click that file I get an error...
Where must I place the original rom file?
Thanks
Finally a visual kitchen for the acer s200 =]
rafyvitto said:
Finally a visual kitchen for the acer s200 =]
Click to expand...
Click to collapse
Can you make a visual kitchen for acer s200?
Can not wait for it.
thanks for your trouble mate!
I don't know where to place the original rom, can somebody help me? please
Tnx. Will try to cook my own rom.
THis kitchen can dump any rom? Even custom?
I tried but porting new SYS don't work for me. I ran Build ROM.bat and choose 1 for porting new SYS and after it wrote "The system cannot find the file specified."
Cook'in failed!
After dumping, I can't ound OEM folder in dump\dump. It seems that the programe delete a lot of files and folders dumped in dump\dump at last.
By the way, the last command in the batch file doesn't work over Windows 7.
syeanwoo said:
After dumping, I can't ound OEM folder in dump\dump. It seems that the programe delete a lot of files and folders dumped in dump\dump at last.
By the way, the last command in the batch file doesn't work over Windows 7.
Click to expand...
Click to collapse
after dump ROM, OEM is in SYS - folders OEM_DPI_192, OEM_Lang_0409, OEMDrivers, OEMDriversHigh and OEMMISC.
Thanks, more help!
Qazer said:
after dump ROM, OEM is in SYS - folders OEM_DPI_192, OEM_Lang_0409, OEMDrivers, OEMDriversHigh and OEMMISC.
Click to expand...
Click to collapse
Thank you very much, buddy! More help, please.
Can I just cut the five folders with the names started with "OEM" in folder "...\dump\dump\SYS\" to folder "...\OEM", then move the folder "...\dump\dump\SYS\" to folder "...\"?
And then, how should I edit these files and folder? Such as add a font.
where i finde the new FLASH.BIN after coocking?