Hi,
Is there any way to fix a bricked phone ?
Can someone please guide me through this please ?
This is what my hero looks when I turn it on :
http://www.youtube.com/watch?v=6ymKG3sLeoI - second 26 , then after 5 seconds,it closes itself(it just shows that image ... not text is displayed )
this is the third thread you are opening about this topic. do you really think that is going somewhere? if someone knew what to do he would have told you already, don't you think?
if you can not boot your phone to anything (recovery, fastboot, hboot...) then it is BRICKED. face the facts, you made a mistake and destroyed your phone. now go buy a new one, or send the old one to htc,
but stop spamming the forum with the same request!
Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
This is Dev section , please post in general section !!
Sent from my LG-P500
Sorry - Can a mod please move this to the correct place.
Don't u have warranty???
Sent from my LG-P500 using Tapatalk
I bricked my phone the same way.
I was trying to flash the original russian Gingerbread with LGMDP and there was a cable connection problem... I chose to erase all data before flashing (EFS Erase ALL). If only mobile devices had BIOS...
No hope, unfortunately. You have to connect your chipset to a computer and manually write all data... Or send to LG Service Center. Just hope they'll fix it for free... (They can't detect how you wiped device's boot loader if all the flash memory is empty)
paulrgod said:
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
Click to expand...
Click to collapse
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
shhbz said:
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
Click to expand...
Click to collapse
Thanks for the links - i was working my way through the second one at 3am this morning.. Yes - i've even tried Shaking it
The P500 community has produced some wonderful guides and looking at it seems like the device is almost impossible to Brick completely, just how this happened i havn't a clue, seems ive managed the almost impossible..
I'd more than likely be able to ressurect it if it responded to anything at all - but no power, and nothing when the USB is inserted, no vibration, no lights, no signs of life...
the phone may be under warranty, but ive got to dig out the reciept - and i cant even begin to think where that is..
Well anyway i've had to buy her a replacement today - ended up with a Samsung Galaxy Mini as they dont stock the Optimus one anymore. Closest thing i could find.
Cheers for the help guys - i guess next effort will be warranty repair.
dude pls try uninstallin all the lg drivers usb etc etc and then try it again...it happend to me but ive still managed to ressurect it so try this and after send it to warranty
As I was nervously trying to install a custom rom, i wipe everything off my device ( HTC Desire X ds ), as per required by the instruction. But before in could install the rom, the device shut itself off. Now I can't even start it on bootloader, it just simply display a black blank after a short htc logo appears. Then after a while it vibrate 7 times in a row. What should I do to fix this, please help me out guys!! BTW thanks in advance
popo_hangzo said:
As I was nervously trying to install a custom rom, i wipe everything off my device ( HTC Desire X ds ), as per required by the instruction. But before in could install the rom, the device shut itself off. Now I can't even start it on bootloader, it just simply display a black blank after a short htc logo appears. Then after a while it vibrate 7 times in a row. What should I do to fix this, please help me out guys!! BTW thanks in advance
Click to expand...
Click to collapse
After looking at similar situations to the problem you have, I would try pulling the battery and then seeing if your able to get into the bootloader or recovery mode even. If you aren't able to I would recommend taking a look at this thread where users of the Desire HD ran into a similar problem to yours. Overall, unfortunately warranty or a service center may be the only option for your phone, or JTAG.
Yea, pretty sure that's the built in HTC SOS message for motherboard failure. Sorry. :/ If it makes you feel any better, the chance that was caused from you wiping the phone is next to nil. Think it was just bad timing. These things happen to non modified phones and doing resets and even wiping the system would not cause the motherboard to crap out. Previous comment was right about a JTAG service or sending it directly to HTC would be the only options.
Thanks guys
Well, hello guys from xda, ill be fan of this site for a long time but i recently made an account just for get a bit of help with my phone since idk wtf im doing wrong(
Well my phone is the blu studio 5.5 s d630u.
First it was stuck on bootlogo, i tried to made an hardreset but i wasnt able to enter into recovery mode idk why.
so i tried to flash it, after i try it pops up an ERROR i dont remember exactly.
Now my phone dont event turn on but when i connect it to my pc the flash from the camera turns on for like half second then it get recognize by my pc.
Now when i try to flash my phone it just gives me any error.
i would like to upload images but i cant idk why or idk how:laugh:
Help me with this PLEASE, im kinda desperate and without money to send it to technical support :s
Ty for view this thread and sorry for my english.
I see you posted over a year ago but hey better late then ever anyway i have the same phone and it did the same thing and i was able to fix it very quickly
Hello guys!
I need a big help!
I have a meizu pro 7 (128GB). Have a bootloop and want now flash again with the stockrom "Variation A".
I can start in fastboot variation.
Who can help me? I have downloaded the last flyme-rom.
What did i have to do to "unbrick" my phone?
Thanks for help!
Best regards peter
Hello guys!
I have solved the problem!
When you start the phone in "recovery mode" and connect the phone to a computer so you will find a drive with "recovery". At this drive you can copy an "update.zip" (a-rom) and start at the phone. So it will restart and reboot.
I hopy anyone can use it.
best regards
peter
Did you ever figure out if this is possible?
Im in a bootloop and the recovery on this phone only give 2 options ive been trying to figure out how to sideload but without a proper recovery i cant do iot
fastboot takes commands but without a bootloader unlock and a recovery worth a **** i think its a fools errand. meizu is no help ive heard either
If you have damaged the stock recovery image, there is no option to restore. you need to pack the phone and send it to a Meizu dealer for reflash.
I have a brand new pro 7 plus Stuck at the FLYME with the turning logo . Shame really I didn't do anything out of the ordinary and now it's a 600 paperweight. Where is a service e center ? Nightmare this is ......I even contacted Meizu directly they basically told me to go @#$% myself ...
herb9876 said:
I have a brand new pro 7 plus Stuck at the FLYME with the turning logo . Shame really I didn't do anything out of the ordinary and now it's a 600 paperweight. Where is a service e center ? Nightmare this is ......I even contacted Meizu directly they basically told me to go @#$% myself ...
Click to expand...
Click to collapse
If its on Logo rotating, the bootloader probably is fine. You need to find the same version of the software that you have had on your phone. Then you go to recovery and flash it. There are two ticks, before the flash process begins. Mark both. Flash, reboot and it should be as good as new.
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
herb9876 said:
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
Click to expand...
Click to collapse
Hi, I'm sorry dude but we're in the same boat. There is a problem with the Chinese variant, when you flash a beta A firmware and then flash the G firmware, the phone gets stuck and you can't update to any firmware anymore. We asked Meizu on the Flyme forums for a while (it's been a while our phone is useless), a moderator said not long ago that apparently they will release a new firmware which fixes that, I'm not certain about it but it's our best bet at this point. Either that, or if someone with enough knowledge manages to find a way to unlock the bootloader.
Here is the link to the bug report if you want to click the "I have the same" button and, maybe make them hurry a bit?
http://forum.flymeos.com/thread-38010-1-1.html
herb9876 said:
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
Click to expand...
Click to collapse
Have you searched this site ?
https://reameizu.com
how to enter in fastboot mode meizu pro 7 plus ?