hi
i need to change my mega from german to english language. i registered qmat, formated SD card (FAT32), changed registry settings 00001001 set to 1, but when i am clicking "Get serial SD card..." qmat closes it self.
the phone is connected with activesync (i can navigate through my phone's files) .
i am using win xp sp3.
any help?
Related
G'day,
Does anyone have an upgrade for PPC 2002 to 2003 for an O2 XDA I, cause I found ome but i have to pay for them.
Cheers,
Cal
http://lumpistefan.dyndns.org/
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
any one know how I can unlock O2 xdaII using Mac OSX and missing sync. I have tried xdaunlock-v2.2 but no magic? and don't get any connection with mac if I go into usb mode through hard reset.
ROM 1.03.00 usa
Radio 1.05.12
Virtual Windows
Install a software to emulate Windows on your Mac. Try Virtual PC from Microsoft
1) copy xdaunlock-v2.2 onto a SD-card.
2) insert SD Card into XDA II
3) File Explorer -> browse to Storage Card
4) Run xdaunlock-v2.2
Hello there guys...
a friend on mine brought me his sx56 to unlock, so when i searched over the internet i found that i need to update the rom with this special ROM, so i tried to update ROM with XDA-developers-SER-v12 using USB cable (cradle) it should take 5 minutes, but the computer restarted itself and the procesure was not compleated, and after that when you push the reset button (hole) it takes you to the bootloader screen and sayes GSM OK and give you the test functions, after that i tried to backup (i should backuped befor updating) the boot, it saied that sd card was writen ok, i hard reseted the device again but nothing happend, now it does noty inter the boot loader again, the device is stuck in the upgrade screen, when you push hard reset or soft reset nothing happens, ofcourse device can not be detected using USB connection.
i think the bootloader was damaged as well as the ROM, is there a way to rewrite the loader and the rom using SD card? because i dont have a serial cable.
thanks in advance
Mansi
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
Help plzz, where i can dl XDA II ROM ver 1.66.00WWE
coz i need this rom before upgrade to wm2003se
can i downgrade from wm2003se to wm2003 if i hv something not right ??
n how to downgrade ??
n i more question how to connect active sync after hard reset ??
coz i hv back up my xda to active sync but after hard reset
active sync cannot use my old partner ship name. i must change to new partner ship name to connect AS coz old partner ship name already in use.
i am waiting 4 ur answer
n thz for all
Why not make a backup from your device...
Procedure here...
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62
Additional Procedure:
How to store SD Card data to PC (Must have SD Card Reader) inorder to use SD card for other purpose.
Download ntrw.exe -> http://www.tamiminet.com/othman/ntrw.exe
Copy ntrw.exe to C:\
At Dos Command Prompt goto C:
Type ntrw read XDAII.nb1 E:
(file XDAII.nb1 is the rom name (actually you can assign any word) and E: is Drive of SD Card Reader)
You will see file name XDAII.nb1 at C:
Then you can format SC card, that's all.
How to write saved rom file to SD card:
Type ntrw write XDAII.nb1 E:
===============================================
Abt AS:
delete partnership without connecting the device.
Hi, can XDA2 running the XDAIIs os...........WM2003SE ?
cctay said:
Hi, can XDA2 running the XDAIIs os...........WM2003SE ?
Click to expand...
Click to collapse
NO
Hi,
I am trying to install hard spl on my hermes, checked everything (activesync etc.) but as soon as the installation starts, am being asked to allow the use of the programs on the hermes....the hermes comes up with a soft return...and afterwards I get an connection error... Any help will be highly appreciated...
Kind regards,
Anton Will van Zoelen
PS used version 7 of hardspl
Go to page 116, post 1160 of the Hard SPL thread for instructions on using SD Card method. You need a 2Gb or less card and it must be formatted FAT32.
Hi,
Thanks for your quick response. Will do...
Kind regards,
Anton Will van Zoelen
Hi,
Did excactly as was said but when I started the program SSPL-HERM.exe the pda did soft reset and nothing happended. Did not format the micro SD as it is FAT32.
Any advice....?
Thanks...
Kind regards,
Anton Will van Zoelen
SSPL.exe must be on the phones memory when started or it won't work, Are you sure that the sd card is Formated FAT32 as it comes default FAT. Check you renamed the .nbh file properly - hermimg.nbh .Also sd card MUST be 2Gb or less...
Cheers...
This exact thing happened to me. For some reason it isn't compatible with windows 7 or vista. If you can't get it to work on the sd card, try doing it on a computer with windows xp, make sure you have .net update on it too. Or you could try xp mode on windows 7. I ended up just using xp on my netbook.
Alex1261 is correct -- you could install and use Windows XP mode assuming your current hardware configuration is compatible. To learn more about Windows XP mode, please go here: http://bit.ly/lvAjC
Jessica
Microsoft Windows Client Team
windows xp mode uses virtualization. i'd reaaallly recomend against that, and even then i don't know if you can bridge the USB ports.
point: use xp on standard hardware. netbook, as alex said is a good way to go.
use the [Easy Hard-Spl v7 beta v0.1] by qwasde2
it,s really usefull i tryed it,s by me
it,s for win XP and vista and se7en users
i,am not joking here is the link
http://forum.xda-developers.com/showthread.php?p=5136858#post5136858