Related
I've just ordered an MDA Vario and it's going to take a little time to reach me (I'm not currently in the UK). Before it gets here I'm trying to work out which screen protector to buy. Has anyone tried the Invisible Shield protector? The material looks superb and I've read load of good things about their performance on iPods.
My current PDA is a Tungsten T3 and I have a Martin Fields screen protector on it. (MF protector for Wizard here).
I love the MF but am really interested in hearing experiences with the IS if anyone on these forums has tried it.
Yeah i want one too but was wondering, do they leave any marks when you peel them off afterwards? From the glue and stuff?
Quality screen protectors like Martin Fields and the IS should leave nothing behind after they're removed.
I think brando screen protector is not bad too. Im currently using it.
I have change 2 screen protector since I got my wizard.
- Expansys, Cant fit in properly. Bubble occur after stick in.
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
For me brando's would be ok. I usually have the store person do the application since I can't do it on my own [I messed up 2 protectors when I tried doing it at home]. I'd say choose one that isn't adhesive but static that way no residue is left on the screen when you remove it. also most of them are washable/reusable... if you find a scratch on the side you use most often [i.e. the area along the SIP] just have it removed and re-installed reversed [not the face but the top and bottom].
The Brando ultraclear is OK. If you prefer a non-glossy one, the Brando regular is perfect (you will lose a bit of brightness).
I like www.boxwave.com 's version
They have a anti-glare, and a regular one, they are washable you can remove them and wash them under soap and water and reapply, they come with cloth cleaner, and a little scraper thing that helps get the bubbles out.
Here's a super cheap solution, and it works GREAT for me.
I went to Staples and bought a package of baseball card protector pages that are designed to fit into a 3-ring binder. The size of each card holder is just slightly larger than the screen on the MDA.
What I did was take a straight edge and X-Acto knife and cut a small piece of plastic that is a couple millimeters larger than the screen on each side. I simply tuck the plastic I've trimmed under the lip between the device and screen, and it holds in place just fine.
No adhesive, no mess, easy as pie, and the entire package of plastic sleeves was less than 3 bucks. It will surely last longer than the life of the device.
- Justin
Got my second Brando regular protector (first one wasn't returned when my magician was replaced). Fits perfect, very scratch-resistant & the anti-glare is very useful while navigating in the car.
Cheers, M
fone_fanatic said:
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
Click to expand...
Click to collapse
Same here.. I have used BoxWave, wich are also very good, but WriteShields from pocketpctechs are great.
I also had an "InvivibleShield" on my 8125 for a couple minutes. I installed it and saw that it was not plum on, so I went to take it off and reinstall.. When I removed it I thought I was going to pull my screen up with the protector. Stay away from those things... I then tested those claims they make on the website, about being indestructible. Pens had no trouble getting through, and scissors went through like soft butter.
$.02
I bought a boxwave and was not happy with the glare free one. I have used them on my Treos and liked them, but the one that came for my wizard sucked. It really blurred the screen and made it look like a prism. Maybe it was defective, but I ended up buying another one from javoedge and I am quite happy with it.
just my $.02
greg
I also got an anti-glare from boxware, it does have issues however I emailed them about it and they are getting a new one that doesn't have the issues and they should have it in about a week. To make it even better they created a gift order for the new one for me.
I've tried a number of the commercial screen protectors in the past and wasn't happy with any of them. Of course, there is the ridiculous cost for a little piece of plastic.
The best solution I have found is to use clear vinyl sheeting that you can find at any fabric store, typically for a couple of dollars US per yard. Just cut to fit your screen, clean your screen, wash your hands and vinyl rectangle with liquid hand soap, shake off as much water as possible (but not all), and attach and smooth out bubbles.
Benefits:
- Minimal screen image degradation as compared to many commercial screen protectors
- No adhesives to gunk up the screen
- Lasts 6 months or so
- Easy to replace
- Costs about a nickle per cover
I also have the pocketpctechs write shield anti-glare.
Comes in a nice kit, can't tell its there when the screen is on.
http://www.pocketpctechs.com/main.asp?unit=Cingular_8125-559&area=home
I bought mine from www.nushield.com, but I haven´t been able to apply the first one to my screen.
I´ve used them on my Handspring Visor Edge and on my Himalaya with very good results, but on the Wizard, I just can´t get it installed. Will keep you posted!
Stefan out
Brando screen protector, Boxwave and Martin Fields are my favorites!
I've heard a lot about this Brando, but it is a bit too expensive for me for a piece of plastic. I think they are selling for GBP7+ in eBay. I wonder, is it so good? I've been looking for those 'card' type screen protector that is ultra easy to apply and bubble free because the protector itself feels like a card. Imagine, since the protector is like a card, it is impossible to get bubble under it. Anyone know where in the net I can get one card type for UK??
BTW, I've bought the 'Sensifilm' protector from eBay. It said many things, but of the two thing, antiglare and antiscractch is 100% bluff. Mine still give me glare and it has been scratched like mad with my stylus. Either the HTC is very bad in designing a stylus, or the screen protector is terribly weak. I think the weak protector is a more likely answer.
30$ for a screen protector. That is so silly. I got a protector for my psp for 6$ and it works great. Geez, pocketpctechs is a rip.
Cant i get some from a local store instead?
I can highly recommend Brando UltraClear too! Easy to attach, not visible when attached carefully, no reduction of brightness - display looks like without one (for those who do not like the reflection of the display: buy the Brando classic).
Regards
Carsten
The TP2 relies on much more touch-screen action than previous T-Mobile HTC devices, e.g. Wing. I am trying to find the pros/cons of using a screen protector for the TP2, but so far, not finding much. Is a screen protector really that important for a TP2? I am ok with not using one, but if one is necessary, can anyone tell me why? I wonder if a screen protector is more of a personal choice than a technical necessity...
I find a screen protector is more of personal preference, i use it for peice of mind so i dont have to be extra careful when using my screen and also when i play music on my tp2 i put it facedown as the speakers are on the back and i have done that before on a previous phone and scratched the screen as there was dirt on the table. also if you put it in your pocket without its cover and you forget about coins or keys in there, you can say goodbye to your nice shiny screen. So i know if the screen ever gets scratched i just peel off the protector ansd put a new one on.
fibrou said:
The TP2 relies on much more touch-screen action than previous T-Mobile HTC devices, e.g. Wing. I am trying to find the pros/cons of using a screen protector for the TP2, but so far, not finding much. Is a screen protector really that important for a TP2? I am ok with not using one, but if one is necessary, can anyone tell me why? I wonder if a screen protector is more of a personal choice than a technical necessity...
Click to expand...
Click to collapse
I've had my TP2 for about three months now and i've not used a screen protector. I'm quite carefull with the device and i use the pouch every time i put it in a pocket.
I'd like a matte screen protector because fingerprints annoy me to no end, waiting on boxwave to make one because when I had the mogul I used those and they were awesome... but uhm yeah I don't think it's necessary if you're careful with it. Most people I know with the iphone don't use one, and the screen seems similar. There's always that chance you leave you phone in your lap and get up and then BANG (yeah that definitely just happened to my Mogul last week) so I keep a screen protector on just in case. Performance wise, I don't notice it being less responsive when I use the protector, but then again I haven't used it without one much... Isn't there a CAB somewhere to boost touch sensitivity? Wonder if it will work on this...
You want to try the full body shield by zagg they are based in utah where i am from and their crap is the best quality and lifetime warranty
The Zagg one is still being developed, I wonder if the bodyguardz one is just as good...
Brando Screen Protector
I ordered the Brando Screen Protector however i noticed TMO TP2 is different from the other ones being sold. I wonder if anyone has been able to make it the Brando Screen protector work with the TMO TP2.
Product Code: MUCSP041200 for the Touch Pro 2
mobile.brando.com
I'm using the stock screen protector that comes with the tmo version. It was kind of hard to fit on the screen because it is so perfectly cut to the size of the screen and plastic all the way around the buttons and earpiece. It's been fine so far, I ordered a couple off ebay when I got the phone but I think I'm gonna just keep the stock one on there.
Clearprotector uses the same "stuff" as Zagg and they have a T-Mobile TP2 version.
Genesis3 said:
Clearprotector uses the same "stuff" as Zagg and they have a T-Mobile TP2 version.
Click to expand...
Click to collapse
I ordered one and I didn't like the fit. It didn't go all the way to the edges. The top and bottom were too short.
I stuck the bundled one back one since it has a perfect fit. Only problem I have is I somehow made to tiny creases/bumps which is causing to small air bubbles on the edge.
I would not use a device like this without a good screen protector. I used to not care until I got a scratch on the screen protector of my last phone from an unexpected drop and scrape. It would have ruined my screen.
The stock screen protector is very good, it just takes a surgon to put it on because it is laser precise and perfectly cut to the screen. I had to use a razor blade to trim about 1 to 2mm off the left edge to get rid of an air pocket that was resting on about a 1mm lip. (I don't suggest trying it if you don't have a steady hand)
But I'm looking at a full body screen protector to put on next. I ordered a rubber snap on cover, but I don't want to ruin the look and feel of the device. And the phone is big enough already - don't want to make it more bulky. I've been seeing one on ebay saying that it's used to coat helicoptor blades and has a lifetime warranty and all that. Just waiting for someone to order one and review it.
phonepunisher said:
I ordered the Brando Screen Protector however i noticed TMO TP2 is different from the other ones being sold. I wonder if anyone has been able to make it the Brando Screen protector work with the TMO TP2.
Product Code: MUCSP041200 for the Touch Pro 2
mobile.brando.com
Click to expand...
Click to collapse
I also got this screen protector from Brando (same model as yours, as far as I can tell) for my T-Mo TP2...and it doesn't quite fit properly -- it's obviously made for the international/original version with the curved chrome trim on the front. That is, it fits on the phone, but the top and bottom of the front outside the screen aren't covered. And I had to trim out the ear-speaker hole on the protector a little because apparently the distance between the bottom-buttons and the ear-speaker are different between the intrntnl and the TMo versions.
Still, I'm using it anyway (even though it looks funky) just so I can protect that beautiful screen...but when/if one is specifically made for the TMo TP2 I'll get that one.
Other than not fitting exactly right, I do like the protector clarity and sensitivity, and I was able to apply it without bubbles.
UPDATE:
OK, I see now that I ordered what I thought was the same protector, but I ordered mine from "shop.brando.com", rather than "mobile.brando.com" -- What's the difference -- more than one brando.com site?? And my product code is different. (SUCSP083500 vs MUCSP041200)
Looking again at the shop.brando.com page for the product I ordered -- 10 days after I ordered it and 3 days after I received it -- that while the T-Mobile version is listed under intended "Models" there's also a footnote saying it's not compatible with the T-Mobile version. I don't think that footnote was there when I ordered it.
I wonder if the version sold at the mobile.brando.com site, Product Code MUCSP041200 really fits the T-Mo TP2? If so, I'll go ahead and order one...or 2.
Has anybody every used this brand of screen protector's before? They just sent me an email saying that they have in stock screen protectors specific for the T-mobile TP2 and I am debating whether or not to buy them.
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I originally had a Martin Fields on my Touch Cruise that I loved, but they don't make the screen protectors for the T-mobile TP2
I used one on my MDA (prior to getting the TP2). I loved it (make sure to get the crystal clear, not the non-glare, if they have a choice). 3 years and looks like new, nice slick surface for using the stylus, extremely durable. But I don't have experience with any others (except the one that came in the TP2 box which I also like a lot).
Thanks for sharing!
I´ll go for one of those
The crystal clear is one of the best I've used before!
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
is the anti glare version kinda gritty to the touch ive never used one?
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
Speaking of anti-glare... im using one on my Iphone 3G..got it back from Manila,Philippines on my last holiday, some chinese brand screen that i thought will be just a piece of crap screen protector.
to my surprise it was 98% perfectly fit on my iphone...and it was a great anti-glare screen protector. my wife likes it now she wants 1 for the htc touch pro2. ive seen some on ebay i might order it this week.
for those who's using one... where did you guys buys the anti-glare screen protector?? -thanks
Arcarsenal said:
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
Click to expand...
Click to collapse
Nice one thanks
I've raved about it before many times, just search my posts on here and PPC geeks, but the BoxWave AntiGlare is the best screen protector for any device hands down period end of story etc!
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
I wouldn't say gritty, but its definitely neither frictionless or sticky and doesn't impede your fingers or stylus movement in anyway... its got a matted texture, and I really like using my stylus with that texture! more of a paper feel, offering just the right amount of feedback and friction.
You do lose a tiny bit of clarity compare to the Crystal version, but for the anti-glare, anti-finger print benefit, I love it!
finger prints and face oil on the stock screen protector have been driving me nuts!
I'm supposed to get it today but heading out of town for a wedding this weekend so may not have a chance to report or upload pix until monday
Thanks for the report, i can imagine a paper texture! i think i may order one. cheers
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
venomshot629 said:
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
Click to expand...
Click to collapse
Personally, the 3M crowd is better because then you don't have to worry about the screen protector getting scratched.
I had purchased a Boxwave Anti-Glare before and it worked decently, but the amount of glare it reduced was negated by the amount of brightness that needed to be increased.
Boxwave, in my opinion, works if you have a case protecting it. But trying doing this with a Boxwave.
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
NOT gritty.
I have used Boxwave screen protectors for years and have NEVER been disappointed. Excellent longlasting product that your stylus simply glides across; I have settled on the Anti-Glare. One post says that Boxwave isn't TOTALLY scratch-free like some other 'full-body' clear protectors. Correct. However, personally I do not like the idea of spraying a liquid all over my device in the application process. 'Full-body' protectors are applied just like installing tinting on you car's windows.
Suggested application procedure.
Before beginning I have two clean microfiber cloths; one is included. Clean your phone's screen well; preferably w/one of those microfiber cloths. Close windows in bathroom, run shower on hot a bit & turn off. Moisture will pull all the dust outta the air and drag it to the floor. Vent heat (u don't want it to be uncomfortable in there).
Now that all the floating dust is negated, clean your screen again w/the the other microfiber cloth and apply protector. It is helpul to have some tape applied to a corner or two of the protector. Utilizing the tape, lift and reapply as needed using the supplied squeegee or a credit card to clear out bubbles; you may need to lift protector and use the microfiber cloth to pick up some lint/debris to ensure a clean install.
You should have a lint- and bubble-free application if you were careful.
Good luck from Lincoln!
I just got the new Boxwave ClearTouch Crystal screen protector for my T-Mobile TP2: http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I had previously had a Boxwave on my MDA. That has lasted 3 years with no signs of wear, and I was extremely pleased with the fit and feel, so was hoping to do the same for my TP2. I researched all of the competition and read many forum posts on the subject. My main criteria were:
1) quality
2) exact fit
3) feel with finger and stylus
4) longevity
Price was less of a concern as I am hoping I will only ever need just the one for my TP2 (if my previous experience with the MDA is anything to go by), and so the lower priced ones, or the ones that came with 2 or 3 in the pack, were not a strong selling point for me.
The other main one I narrowed it down to was the Bodyguardz, and I probably would have got that if the Boxwave hadn't been coming out soon.
Boxwave advertised pre-orders were available for October 9th shipping. I searched high and low but couldn't google a single coupon code, so ended up paying full price of $12.95 + $2.50 shipping. They shipped a day or so late, and because of the long holiday weekend it arrived a little later than it probably could have, but as far as shipping, packaging, tracking go, I give Boxwave an A-
I had actually been perfectly happy with the screen protector supplied by HTC, but as others have noted, in some cases it may have been a tiny bit too large, causing bubbles along one edge. I think I had put it on pretty perfectly, but then, in my obsessive need for perfection, had pulled it off a little and proceeded to snip away too much screen in an attempt to get it to fit just right, making for an install that now looked a bit messy and with a bit of glass exposed along a jaggedy edge of protector. But the Boxwave fit perfectly, and very easily, just using the instructions on the package (i.e. I just put it on dry, no sprays or water). I did steam up the kitchen a bit first to try to remove dust, and obsessively cleaned the screen for 10 minutes before attempting the install. On my first attempt I started from the short top edge and that caused a problem as the protector was now not aligned correctly down the right side, so I pulled it up and laid it down again from the long left edge, making for a much easier alignment. However, when I had pulled up the protector from the first attempt, I had used the little plastic card to ease up the protector; I think I caused some very minor damage to the protector at the point of contact, as there is now a tiny minor bubble there that is probably caused by a kink I may have made in the plastic. I'll work on smoothing that out, but it's off the screen and very minor (however, let that be a warning to others to be extremely careful if you need to lift the plastic off. I tried using sticky tape but the suction was too strong for it to get a grip, and using something like a pin seemed like potential to damage the screen.) For fit and finish and ease of installation, I give Boxwave an A (and me a B- )
The surface of the 'Crystal' clear screen (I don't know how different the 'anti-glare' version would be) is very slick. In fact looking at it, touching it, sliding my finger across it, and using the stylus on it, seems exactly the same as the actual glass screen on the phone. I went into notepad and made a new note so I could doodle with the stylus. With almost no pressure I could draw lines about 90% of the time, the rest it would skip a little. But with just a tiny amount of pressure, about what you would probably use in normal use, it was at 100% coverage, with practically no drag feeling, just a nice slippery but not too slippery feel. Sliding with my finger is fantastic, I can now scroll through the programs screen much easier than I did with the original HTC. For sensitivity and surface texture I give it an A+
Overall I give Boxwave and the Cleartouch an A+. I am reminded of that old Memorex commercial 'Is it real, or is it Memorex', because looking at the phone right now, I can't tell it has a screen protector, it looks just like glass. I am sure there are others out there as good, although I doubt there are any much better. There are certainly other quality ones that are much cheaper, $15 seems like a crazy price to pay for a piece of plastic. Others come with 2 or 3 protectors, and many have coupon codes you can find on Google. And others, like Bodyguardz, come with a solution for complete protection, not just the screen. Of course time will tell, but based on my A+ experience with Boxwave on my MDA, I really am quite confident of the same longevity and performance on the TP2.
One happy customer.
I've used Boxwave screen protectors and accessories for the past several years, and I can honestly say I've been always 100% pleased. I've used both the antiglare and clear protectors, and prefer the clear ones - but it's all a matter or preference, but overall a good purchase.
First, Boxwave screen protectors have always been my standard. I've tried a couple other types (mostly what's been included with devices or what I can find in retail stores) and won't likely be messing around with that again. I personally prefer the "crystal" models over the anti-glare because I didn't like the affect of the anti-glare pattern on the display. It kind of gave it a fuzzy moire pattern. The crystal basically looks like those super glossy laptop screens - looks great in low/medium lighting but could be a problem in certain direct light situations. Still, the trade-off is worth it to me.
Second, does anyone know if any of the existing TP2 protectors will fit the AT&T Tilt 2? The European/UK model looks not ideal because of the front camera hole and the T-mobile version appears to have a slightly different button layout on the bottom. Both the Verizon and Sprint models look right to me on the web page, but Boxwave support just says to submit a request and wait. I would prefer to get a protector on mine ASAP but am reluctant to order if the fit isn't right.
Daniel
bought one for my Sprint Touch Pro 2, it applied perfectly and not noticeable at all. I prefer it way over the invisibleshield I had on my Vogue which was too rubbery and reflective.
Am I correct to think the Boxwave screen protector for the Sprint TP2, Verizon TP2, and the ATT Tilt 2 are the exact same thing? I have been looking at pictures and the screen shapes look identical. The only different ones are the T-mobile and the front facing camera versions.
Thanks!
Hi All,
Can someone please recommand me a good protector? I'm currently using the Smartphone Experts one...the material does a great job in reducing smudges and oil marks but I strongly recommend against that brand because it looks like it was cut by a 5 yo with safety sisscors. The non straight cuts and horrible fitment doesn't bother me too much as the Innocase covers the edges, but it causes the protector to be lifted around the entire edges. This drives me nuts as I'm pretty anal regarding cosmetics.
I know there's the Brando (?) one, but haven't found any reviews regarding quality..any others?
Thanks,
I've used only three brands of screen protectors... I can recommend that Clarivue is the best of Stock T-Mobile Screen Protector and Zagg. Clarivue is simple and is anti smudge/glare to apply to your phone and much tougher than T-Mobile Screen Protector, but Zagg is even more protective but it has issues like orange peel and the screen is very sticky and hard to apply, and it doesn't look so good with smudges and oil marks. The worst of all is the screen protector is very hard to slide your finger or even stylus around.
Just ordered. Thanks for the recommendation!
It's on sale for $10.99 for 2 + 10% discount (code: Clarivue7) + free shipping = $10.38/tax!!
I also found a great detailed review here.
Edit - can't post link..but you can google "Clarivue Anti-glare screen protector for Droid" posted on androidforum
I have been using the Boxwave anti-glare screen protector and I think it is an excellent product but I do not like their customer service. Just recently I noticed a scratch on my LCD so I email Boxwave to send me a replacement.
It took them 3 days to return my email, and I ended up playing a cat and mouse game with them to send me a replacement. Keep in mind everytime I sent them an email it took them 3 days to get back to me. I first opened a case with them on 4/05 and finally as of yesterday they accepted the RMA and will send me a replacement.
That is very poor customer service due to the time frame. They do not even post phone #'s to call them directly. I really cannot tolerate poor customer service and I will be doing business with them again. I've dealt with ZAGG, bodyguardz and Phantom Skinz. None of them took this long to take care of an issue.
As I said if you want a nice anti glare screen protector try Boxwave's, but if issues arise don't expect them to handle it any time soon.
I read good things about Boxwave too, but $15.55 each shipped is a little too steep for me. According to ppl who have used both, quality between the 2 is minimal. :fingers crossed:
eclone said:
I read good things about Boxwave too, but $15.55 each shipped is a little too steep for me. According to ppl who have used both, quality between the 2 is minimal. :fingers crossed:
Click to expand...
Click to collapse
I wish I would have found out about this first. 2 screen protectors for less than $11, thats a great deal.
eclone said:
Just ordered. Thanks for the recommendation!
It's on sale for $10.99 for 2 + 10% discount (code: Clarivue7) + free shipping = $10.38/tax!!
I also found a great detailed review here.
Edit - can't post link..but you can google "Clarivue Anti-glare screen protector for Droid" posted on androidforum
Click to expand...
Click to collapse
Cool, hope you respond to this thread again when you get it and give us your review
So I received my Clarivue Anti-glare protectors today. I must say the whole order processing/shipping process was very fast.
Comparing this to the SPE protector, physically, the material is noticably thinner which makes the touchscreen a bit more responsive. As for cut, this one is better, but still not perfect comparing to Seidio or OEM...but it's ok because my Innocase covers most of the edges. One thing that bugs me is the bottom is straight cut (not cut around the horns by the buttons), which I don't like.
I've been putting on protectors for years, yet I still suck at it. Took me about 10 tries...kept getting dust in between. Since it's static, I washed it a few times with soap and water and it held up fine. I also applied it when it was still a little wet. I want to note that this protector is cut very well, no rough cuts meaning no lifts/airbubbles around the edges like the SPE.
Performance...well, I'm quite disappointed. Yes, it's thinner so it's more responsive, but I never really had any complaints/issues with the SPE one in that department. HOLY COLOR BLEEDING!! With Anti-glare protectors, it comes with it. The SPE one had it, but not enough to ever bother me, but this one, it's pretty bad. Also, on white (ie email), you can really see the red/white/blue. I'm going to keep it on and see if my eyes adjust..if not, I'm going to try the Brando one or go back to the SPE.
Note, for the TP2, I've used OEM, Seidio, SPE, flea market special and now Clarivue.
Edit - Since it's a thread on anti-glare/smudge, I should mention that it does very well at hiding fingerprints. Oil/face prints is ok, hides it better than reg protectors like it should. As for glare..not sure yet. I'm a hermit working in the flippin bat cave so I'll see sunlight when I leave work.
Update - it's only been a couple days and it already got a bit scratched. only wear it saw was in and out from my pocket...not amused
Pro-Tech Seems to Work
I've used Pro-Tech screen protectors for my last three phones -- works great: put it on once (carefully! follow directions!) and forget about it. About $10 for screen protector, and mine still look good after a couple of years each. Makes a good anti-smudge surface.
http://www.protechyourdevice.com/servlet/the-496/Protech-Invisible-Protection-Screen/Detail
figured id chime in on the screen protectors ...ive used about 3 different brands and finally bought the skinomi tech skin it was on amazon for 9.95 + ship and it comes with a lifetime replacment warranty ive had it for nearly a month now and although it doesnt help with the glare as much and shows finger prints .....i myself have personaly ran it through the paces ...i used my car key for a stylus one day ....just to see and sure enough it scratched it to what i thought was unrecoverable and then i plugged it in over night and when i woke up in the morning the screen was as clear as it was the night before so i wiped the fingerprints off of it and tried again
I have been using the ClearProtector for about a month now, and really like it so far. The fitment is just slightly off, but not so much that it would be a problem and it's very tough.
I personally LOVE my Ghost Armor. I used to only use Zagg, but I do not like the very rapid discoloration, the "orange peel" texture, and the stickyness of the film. Ghost Armor is clearer, thinner, smoother, and it doesn't give you that sticky feeling when you run your finger across it. It fits VERY well, and if you have a kiosk in your mall they will apply it for you in about 20 minutes. This also means if they mess up the application of the protector, they will just use a brand new one and fix it for you!
Go with Clarivue Anti-Glare!
eclone said:
Just ordered. Thanks for the recommendation!
It's on sale for $10.99 for 2 + 10% discount (code: Clarivue7) + free shipping = $10.38/tax!!
I also found a great detailed review here.
Edit - can't post link..but you can google "Clarivue Anti-glare screen protector for Droid" posted on androidforum
Click to expand...
Click to collapse
I ordered the Clarivue Anti-Glare with the same deal back in February. (Except no tax, so my total was $9.89 for 2 screen protectors.) HERE is link for CDMA version. Other versions available at www.clarivue.com.
I love it! It makes screen glare almost nonexistent. Best of all, no fingerprints! As an added bonus, the tactile feel of the protector is nice, sort of like running your finger over fine paper. After a day, you don't even notice the difference.
Some people claim to experience a very slight "wet" or "halo" effect. I don't see that normally, unless I have strong reading glasses on, and then I only slightly notice it. In any event, it is not enough to defeat the positives.
All in all, I highly recommend the Clarivue Anti-Glare Screen Protector! I've used daily since February and am still on my first of 2 protectors. And with the deal, it's even better!
I've been looking at some reviews including a very lengthy one from a couple of years back on Youtube where he tried about NINE different brands (Including anti-glare or crystal from the same manufacturers) and he tried pretty much most of the known brands including Zagg. He did miss out Martin Fields and a few others though.
I've seen the XO skins are pretty easy to apply wet. Much easier than the Zagg.
XO aplication.
http://www.youtube.com/watch?v=-Td0vTcKMME&feature=related
Brief thumbs up from someone.
http://www.youtube.com/watch?v=VJGJKH8BGz0
XO skin for TF
http://xoskins.com/laptops-tablet-r...ors/asus-eee-pad-transformer-screen-protector
Large shooutout of various screen protectors. But it's a couple of years old and for a tablet PC rather than pads.
http://www.youtube.com/user/tonkabui#p/u/0/9XdVHL1M7vM
I am going to continue looking. But if anyone finds the perfect screen protector let me know. That XO looks easy to apply. But I want anti-glare and anti-reflectin as well as anti-smudge and 0 bubbles (in other words eacy to apply). Protection from scratches is actually pretty low down my list of wants.
If anyone can post their experiences (good or bad) of various screen protectors please do so here. I noticed there is a reasonably priced TF1010 anti-glare protector made by Posr.us and has two five star reviews on Amazon. Also someone called MFX is making one as well as Martin Fields and SGP Steinheil.
Thanks I needed one still and this looked decent and easy to apply (I prefer the wet application) I bought it and used coupon code "retailmenotxo" for 15% off ... it covered more than the shipping so that was cool.
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
well my screen has a scratch only had it a week
rgalarza75 said:
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
Click to expand...
Click to collapse
Well, scratch resistant =/= scratch proof, so all those people who say Gorilla Glass is the reason why you shouldn't need a screen protector are fooling themselves. I personally have a clearfreak protector on my transformer. It definitely makes me feel more at ease when I use it.
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
I picked up a dcmugen antiglare from ebay and I love it. Damp or dry install, the type with the two peel off layers, and repositionable to boot. It ships from Asia, and mine came with a slight crease causing bubbles that cant be flattened. I've requested a replacement, waiting to see if they follow through. So much easy to use indoor and out, and far fewer fingerprints to clean off.
Sent from my Transformer TF101 using XDA Premium App
Got a zagg at bestbuy today because I was bored more or less. Installation went well even though the thing stuck to itself. But a few hours later and I'm bubble and wrinkle free nd protected. Now to decide if I want a spg crytal or not....
mybikegoes200 said:
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
Click to expand...
Click to collapse
I bought one as well, but it looked like crap on mine. Hen again im terrible at applying these things. I usually let Verizon put screen protectors on my phone.
Has anyone tried the skin protector from PhantomSkinz? I have their carbon fiber back skin and it looks great and is durable
Sent from my DROID X2 using XDA App
My experience with Zagg has been mixed with all my devices but their customer support is good. If you get a bad protector(line down middle, or little imperfections) they will send you another.
The XO skin looked very promising, and for $10 cheaper I thought I would give it a shot. Just placed an order for the XO skin.
Use discount code retailmenotxo for $3 off(free shipping pretty much)
Pulled the trigger on an XO
after watching all the youtube reviews, i decided that the XO looked best.
ordered one this morning.
just a thanks to all the folks responsible for putting the links and testing together in one place for time-challenged guys like me.
btw, i think the transformer is one of the smartest purchases i've made in the last few years. i'm thoroughly enjoying it.
marvin
Following up on my earlier post. Installed the XO skin in my university's clean room(0 dust, yes I wore the cleanroom suit) and it has streaks. The protector quality is very good but once you put it on there are visible streaks all over. I kept the applicator wet so there would not be "burn marks" as specified by the instructions.
Going to ask for a refund... maybe I'll give Zagg another try. My first ZuneHD protector was wonderful but the 2nd one I got had a big line down it(bad QC).
The perfect screen protector
I always have problems applying the screen protectors to any of my devices, so I did some research and decided to go with one made by a company called Aurum. The deciding factor was that it had a large cut out for my camera so its easier to apply. Overall, I am very happy. I got the two pack in case I messed up the first one.
http://www.amazon.com/Asus-Eee-Pad-...4?ie=UTF8&s=electronics&qid=1308242480&sr=1-4
I dont think I will ever buy the wet applicator types again, the dry is just simpler and gives me choices in whether I want a clear or the anti-glare. Hope this helps
Here is the link to the anti-glare offered by Aurum in case anyone is interested: http://www.amazon.com/Transformer-M...1?s=electronics&ie=UTF8&qid=1311083745&sr=1-1
I usually get Bodyguardz for all my gadgets (mostly phones). It just feels better than Zagg's invisible shield and other screen protectors.
Anyone tried using Bodyguardz? I'm thinking about getting either the full body protector or just the screen protector. Hmmm this is tough.
Following up... after 24 hours drying/curing it looks much more acceptable. The funny part is there is a tiny black spec under the protector. I don't know how it got there since I was in a cleanroom!
Found this one in Amazon, similar to the Aurum with anti-glare.
Anyone has used this ? Is this any good ?
HandHelditems - Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector (3 Pack) (Free HandHelditems Sketch Universal Stylus Pen)
http://www.amazon.com/gp/product/B0056K5D0G/ref=ox_sc_act_title_2?ie=UTF8&m=A1NOY9EOR8TXD6
Hmmm... I have previously considered to buy it too, but I've seen the Gorilla Glas Test with the Transformer in a YouTube video... you dont need a screen protector
I just got a screen protector from Photodon. Their MXA film is great. It was a bit of work to put it on with no dust and correctly aligned. But once it's on it looks pretty good. It's got a glossy finish, so it looks just like the original screen. You can hardly tell that there is a screen protector on the transformer. It is pricey at almost $20.00 each, ut the screen is still sharp and crystal clear with none of the haze that a lot of cheap screen protectors have.
xxx.photodon.com/p/MXA-5445-01.html
I used to have Bodyguards for my HTC Touch Pro and it peeled after three months both times that I used them. Now I use Phantom Skinz and I get no orange peel effect and I've had one on my HTC Evo 4G for almost 1 1/2 years with no peeling and no orange peel effect. Smooth as glass and you can't even tell it's on there.
Now I have Phantom Skinz screen protector on my TF and Phantom Skinz Chromatics white carbon skin for the back side. Very nice to say the least.
I would highly recommend a screen protector for the TF because although it has Cornings Gorilla glass, it sux for finger prints and fingerprints are easier to wipe off of a sceen protector than the Gorilla glass.
im using the steinheil Ultra Crystal. also use it on my phone.