This ROM has been superceded by MCR 1.5 here.
P
aad4321 said:
Sweet, i might give it a shot. quick question tho... will this wipe the device?
Click to expand...
Click to collapse
Modacp said:
I'm pleased to present my MoDaCo Custom Nexus One ROM! No 'wipe' is required to use this ROM.
Click to expand...
Click to collapse
Reading comprehension much?
aad4321 said:
just to confirm, wavesecure add on is a anti theift program which is a monthly service?
Click to expand...
Click to collapse
No, there is no monthly service charge...at least not yet. I have been using wave secure for a little while now, and for a 3rd party security app its pretty damn good.
I tried to flash and got this:
Code:
E:No space left on device
E:Error writing Boot:
E:Failure at line 369:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
I tried to reboot and it wouldn't boot, so I pulled the battery and went back into recovery and tried to apply the NANDROID backup, seemed to apply fine, but now it always boots into bootloader, no matter what I do. I can still make it into recovery so it isn't all lost, but I can't do anything else from there.
Bizarre, never seen an error like that before!
What happens if you try to re-apply the ROM?
P
ccunningham83 said:
I tried to flash and got this:
Code:
E:No space left on device
E:Error writing Boot:
E:Failure at line 369:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
I tried to reboot and it wouldn't boot, so I pulled the battery and went back into recovery and tried to apply the NANDROID backup, seemed to apply fine, but now it always boots into bootloader, no matter what I do. I can still make it into recovery so it isn't all lost, but I can't do anything else from there.
Click to expand...
Click to collapse
did you wipe then restore nandroid?
anyone get tether working on this rom?
Only wireless tether is supported at the moment. Wired tether coming in a future release.
P
modaco said:
Only wireless tether is supported at the moment. Wired tether coming in a future release.
P
Click to expand...
Click to collapse
neither wireless or wired working for me..
Strange, wireless seems to be working for me I think?
P
wireless tethering say "please wait while starting" but never starts...
any suggestions?
modaco said:
Bizarre, never seen an error like that before!
What happens if you try to re-apply the ROM?
P
Click to expand...
Click to collapse
Re-Applying the ROM gets the same result.
I did Wipe and try to re-apply and also wipe and Nandroid. All got me nowhere. I ended up getting it fixed by applying Cyanogens Bacon1.img. I am really interested in your ROM though. Think maybe I got a bad download or something. I will try again and check the md5 sum this time.
my tether puts a signal out and all but i cant connect to it.. only get local
So after downloading the ROM again after the first one didnt work, I got this for the md5 checksum:
Code:
e04970294888313787d0b9d5cb370a12
Which is entirely different than what is posted on the MoDaCo Forum:
Code:
d537e42372a7239dfaf40846ef0b8b4e
However, I could be doing it wrong. This is the first time I tried using md5 checksums to verify a download. However I used two different utilitys to get the same checksum and I don't want to try to flash it again and have it mess up.
ccunningham83 said:
Re-Applying the ROM gets the same result.
I did Wipe and try to re-apply and also wipe and Nandroid. All got me nowhere. I ended up getting it fixed by applying Cyanogens Bacon1.img. I am really interested in your ROM though. Think maybe I got a bad download or something. I will try again and check the md5 sum this time.
Click to expand...
Click to collapse
I can help fix your problem and it is very simple. READ THE FIRST POST BY PAUL. DO NOT WIPE. Do a Nandriod backup then apply the update. Remember do not extract the rom file with I hope WINRAR, just rename update. Let me know if this solves it for you which it should. Kevin
kevinrirvine said:
I can help fix your problem and it is very simple. READ THE FIRST POST BY PAUL. DO NOT WIPE. Do a Nandriod backup then apply the update. Remember do not extract the rom file with I hope WINRAR, just rename update. Let me know if this solves it for you which it should. Kevin
Click to expand...
Click to collapse
Maybe I should have explained everything I did step by step, I did READ THE FIRST POST BY PAUL AND DIDN'T WIPE. Before I even tried flashing, I performed a Nandroid Backup. I booted into recovery, applied the update, got the error message I listed, tired to reboot, got stuck, pulled the battery, booted back into recovery, performed a wipe, reapplied the update, rebooted, still a no-go, rebooted back into recovery, performed a Nandroid restore, after it completed, rebooted, got stuck on bootloader screen, reloaded the ROM on the SD card, tried flashing again, still no luck, ended up flashing Cyanogens Bacon1.img to fix the problem.
I want to give it another try, but I may wait and find out if my md5 sum is correct or maybe try another link if someone post it up.
ccunningham83 said:
Maybe I should have explained everything I did step by step, I did READ THE FIRST POST BY PAUL AND DIDN'T WIPE. Before I even tried flashing, I performed a Nandroid Backup. I booted into recovery, applied the update, got the error message I listed, tired to reboot, got stuck, pulled the battery, booted back into recovery, performed a wipe, reapplied the update, rebooted, still a no-go, rebooted back into recovery, performed a Nandroid restore, after it completed, rebooted, got stuck on bootloader screen, reloaded the ROM on the SD card, tried flashing again, still no luck, ended up flashing Cyanogens Bacon1.img to fix the problem.
I want to give it another try, but I may wait and find out if my md5 sum is correct or maybe try another link if someone post it up.
Click to expand...
Click to collapse
Paul's rom's are only at modaco and I am pretty sure he does not allow other links for I only use his rom's and have one on my Hero Telus, AT&T 3G, and what I like most about them is he keeps them as close to stock as possible, a good thing, and just optimizes them.
Your not going to brick your n1 so I know your gun-shy now but try the link a few more times even and it will work. Also, delete or format your memory card so it the rom is at the root for this might have something to do with it. Want you to have a happy ending. Kevin
The zips are signed, if a download is corrupt it won't flash.
P
kevinrirvine said:
Paul's rom's are only at modaco and I am pretty sure he does not allow other links for I only use his rom's and have one on my Hero Telus, AT&T 3G, and what I like most about them is he keeps them as close to stock as possible, a good thing, and just optimizes them.
Your not going to brick your n1 so I know your gun-shy now but try the link a few more times even and it will work. Also, delete or format your memory card so it the rom is at the root for this might have something to do with it. Want you to have a happy ending. Kevin
Click to expand...
Click to collapse
I need to re-format my sdcard, I still have the three partitions from my G1. I will give that a try, but I am still unsure about the md5 sum issue. Not too worried about bricking the device after all I put my G1 through.
Thank you for posting here on XDA also
Related
I am not new to any of this, but I am having a problem. VZW is sending me an Incredible, so I need to unroot. I used 2 different methods, both of which failed. Can someone please give me a hand or link me to some other options?
These are the methods I have tried:
http://forum.xda-developers.com/showthread.php?p=8315870
and
http://www.droid-eris.com/tutorials-corner/%28tutorial%29-how-to-unroot-your-droid-eris/
Perhaps you could state what problem you experienced when you tried using the Flashback21 ROM; the only thing that it requires is the Amon_RA recovery (Clockwork is not supported). Other than that, it should flash like any other ROM.
You might also want to mention what the exact bootloader version you have on your phone, whether or not you can use your trackball (for up/down/press actions) without too much trouble.
bftb0
bftb0 said:
Perhaps you could state what problem you experienced when you tried using the Flashback21 ROM; the only thing that it requires is the Amon_RA recovery (Clockwork is not supported). Other than that, it should flash like any other ROM.
You might also want to mention what the exact bootloader version you have on your phone, whether or not you can use your trackball (for up/down/press actions) without too much trouble.
bftb0
Click to expand...
Click to collapse
I was thinking the same thing, how can one help with that little info
btw bftb0, thank you for all the help with the uber technical issues around here. Your knowledge is very much appreciated, yeah I'll say it, thank you bftb0
I do have amon-ra recovery. When I flashed it aborted. The error message states a corrupt file. My phone is rebooting now. I am going to reflash to tell you the exact corrupt file. Give me a minute?
escalavee said:
I do have amon-ra recovery. When I flashed it aborted. The error message states a corrupt file. My phone is rebooting now. I am going to reflash to tell you the exact corrupt file. Give me a minute?
Click to expand...
Click to collapse
Did you try re-downloading the file at all?
E: corrupt file: system/framework/com.htc.resources.apk
E: verification failed.
I am redownloading now. I thought of that a few minutes ago.
Yes, I have full use of the track ball. I don't know what bootloader version I have, and it is rebooting again, so I can't check right now...
Thank you for trying to help!
ETA: HBOOT v 1.49
recovery v 1.6.2
radio 2.42.01.04.27
escalavee said:
E: corrupt file: system/framework/com.htc.resources.apk
E: verification failed.
I am redownloading now. I thought of that a few minutes ago.
Yes, I have full use of the track ball. I don't know what bootloader version I have, and it is rebooting again, so I can't check right now...
Thank you for trying to help!
ETA: HBOOT v 1.49
recovery v 1.6.2
radio 2.42.01.04.27
Click to expand...
Click to collapse
If it doesn't work this time, download it with a different web browser.
gnarlyc said:
If it doesn't work this time, download it with a different web browser.
Click to expand...
Click to collapse
Will do. Thanks.
What happened? I can't access the page now to redownload...
I said screw it and tried to open it with IE, and I got a 404.
Nevermind. I got it. Durf.
escalavee said:
I do have amon-ra recovery. When I flashed it aborted. The error message states a corrupt file. My phone is rebooting now. I am going to reflash to tell you the exact corrupt file. Give me a minute?
Click to expand...
Click to collapse
bad download or you corrupted it when you transfered it from your pc.
Use AFV the from the market to verify the checksum of the zip file on the SD card.
When you transfer large files from the PC you always always need to perform a "safely remove hardware" before you unmount from the Eris or remove the USB cable.
bftb0 said:
bad download or you corrupted it when you transfered it from your pc.
Use AFV the from the market to verify the checksum of the zip file on the SD card.
When you transfer large files from the PC you always always need to perform a "safely remove hardware" before you unmount from the Eris or remove the USB cable.
Click to expand...
Click to collapse
Good to know! Thanks. I will try again and let you guys know.
Again, I really appreciate all the help.
workshed said:
btw bftb0, thank you for all the help with the uber technical issues around here. Your knowledge is very much appreciated, yeah I'll say it, thank you bftb0
Click to expand...
Click to collapse
+1 bftb0 helped me figure out my first bricked eris was fubar, more importantly helped me understand why, so the next time I had a soft brick I had taken the preemptive steps necessary to save it. Thanks bftb0
This is making me crazy!
Another corrupt file: system/framework/framework.odex
I did safely remove hardware, and this download was done on IE instead of FF.
I am going to keep trying until I get this done.
USSENTERNCC1701E said:
+1 bftb0 helped me figure out my first bricked eris was fubar, more importantly helped me understand why, so the next time I had a soft brick I had taken the preemptive steps necessary to save it. Thanks bftb0
Click to expand...
Click to collapse
Hey I saw the post about the thanks cherry... that made me giggle on the inside a little...
ETA: I am a dirty lurker...
Try flashing a different custom ROM, possible your recovery has become corrupted. If flashing another ROM doesn't work reinstall AmonRA and try FlashBack again. If it does work, I'd try FlashBack again, just for ****s and giggles.
Hey do I need the radio image? I can try downloading the one without the radio image...
USSENTERNCC1701E said:
Try flashing a different custom ROM, possible your recovery has become corrupted. If flashing another ROM doesn't work reinstall AmonRA and try FlashBack again. If it does work, I'd try FlashBack again, just for ****s and giggles.
Click to expand...
Click to collapse
You know, I tried flashing nonsensikal 15.2 a couple days ago, and I kept getting a corrupt file error with that as well.
Maybe my recovery IS corrupted!
This is insane.
USSENTERNCC1701E said:
Try flashing a different custom ROM, possible your recovery has become corrupted. If flashing another ROM doesn't work reinstall AmonRA and try FlashBack again. If it does work, I'd try FlashBack again, just for ****s and giggles.
Click to expand...
Click to collapse
Do I have to uninstall my old version of amon-ra before I reinstall?
escalavee said:
This is making me crazy!
Another corrupt file: system/framework/framework.odex
I did safely remove hardware, and this download was done on IE instead of FF.
I am going to keep trying until I get this done.
Click to expand...
Click to collapse
Uh, I know you are in a hurry, but ...
It is impossible for Amon_RA to install a corrupted ROM file.
Read that again: It is impossible for Amon_RA to install a corrupted ROM file.
If it passes the verification step in Amon_RA, then the ROM .zip file is OK
Now, if something fails during the install, then there are three possible causes:
- The SD card is flaky, and file reads are erratic (which could allow the verification pass in Amon_RA to succeed, but the subsequent read to fail).
- Prior operations on the phone have corrupted one or more partitions on the phone so that insufficient space remains in the partition you are writing to.
- Flaky hardware.
Does the error with the specific file you mentioned happened during verification or afterwards during the install process?
bftb0
BTW, there are two different "1.49.nnnn" bootloaders - you need to be precise.
escalavee said:
Hey do I need the radio image? I can try downloading the one without the radio image...
Click to expand...
Click to collapse
escalavee said:
Do I have to uninstall my old version of amon-ra before I reinstall?
Click to expand...
Click to collapse
Not unless you have flashed a new radio at some point, and I would recommend avoiding that. I've lost recovery twice, one of the times I was able to just use jcase's 1 Click Eris Root and the other time I had to reflash the recovery, try the 1 Click first, I need to research the procedure for a Terminal Emulator flash again, last time I used FastBoot instead.
Nevermind, I'd follow bftb0, he's far wiser, and I was doing some rather whimsical stuff with my phone and KGB when I lost my recovery.
So, i had my gtab working fine then i tried to go to BL 1.2, had a rom running for a while then decided i wanted to go back to a 1.1 rom, I nvflashed to 1.1 stock image and now my tablet wont boot on any rom that isnt NVflashed, regardless of if i use CWM or stock recovery, what am i doing wrong? It only runs stock Viewsonic roms
What rom were you trying to flash that you could only use on 1.1 that there isn't a port running for 1.2.?
Let me guess. You never wiped out your data before you flash a new rom.
This is a common mistake made by beginners. Is this the case?
goodintentions said:
Let me guess. You never wiped out your data before you flash a new rom.
This is a common mistake made by beginners. Is this the case?
Click to expand...
Click to collapse
No, this is not the case, i am aware that NVflashing changes partition sizes, is it possible that customs roms are larger than Viewsonics rom and there isnt sufficient space to load a custom rom?
Mantara said:
What rom were you trying to flash that you could only use on 1.1 that there isn't a port running for 1.2.?
Click to expand...
Click to collapse
I was running BOS on 1.2 but i was having isues where if the tablet was powered off after initial boot it would not booot again so i wanted to run the 1.1 honeycomb
Have you used cwm to repartition and then load a rom?
Mantara said:
Have you used cwm to repartition and then load a rom?
Click to expand...
Click to collapse
Yes, but from what i know you can only partition the internal SD from CWM
Did you update using ota from stock brfore trying to flash another rom?
How about this. What version of nvflash are you using? I don't just mean 1.1 or 1.2. I'm talking about the long string of number in the nvflash zip file.
There are some nvflash versions floating out there that are bad.
Try this. Go to my website at
http://viewsonic-gtablet-for-dummies.webs.com/starthere.htm
Use the code red procedure. Don't use anything you already have. Download everything from my website. Follow the procedure I outlined. See if this changes anything.
goodintentions said:
How about this. What version of nvflash are you using? I don't just mean 1.1 or 1.2. I'm talking about the long string of number in the nvflash zip file.
There are some nvflash versions floating out there that are bad.
Try this. Go to my website at
http://viewsonic-gtablet-for-dummies.webs.com/starthere.htm
Use the code red procedure. Don't use anything you already have. Download everything from my website. Follow the procedure I outlined. See if this changes anything.
Click to expand...
Click to collapse
my NVflash is not the same extention but the 1.1 file has the same extention as yours, ill try to flash yours anyways.
Mantara said:
Did you update using ota from stock brfore trying to flash another rom?
Click to expand...
Click to collapse
Ive tried ota and NVflash to 1.1 directly neither work
http://forum.xda-developers.com/showpost.php?p=13474033&postcount=114
Was written for linux you might need to adjust the nvflash commands for windows.
Thanks all of you, I got it to run BOS on 1.2 using goodintentions' NVflash, idk what happened but it appears to be working weirdly though, it wont boot a second time without a factory data reset
whodatxevg said:
Thanks all of you, I got it to run BOS on 1.2 using goodintentions' NVflash, idk what happened but it appears to be working weirdly though, it wont boot without a factory data reset
Click to expand...
Click to collapse
Didn't I tell you to use code red on my start here page? Part of the instructions in code red is to wipe data/factory reset.
You didn't really read my code red did you?
goodintentions said:
Didn't I tell you to use code red on my start here page? Part of the instructions in code red is to wipe data/factory reset.
You didn't really read my code red did you?
Click to expand...
Click to collapse
It wont boot without a data reset AFTER the initial boot. I dont think its normal to have to do a data reset after a rom is already installed but that seems to be a rom issue
Yep. Rom issue. Bos needs to be factory reset after flash. Its odd but what needs to happen to boot initially.
Glad to see you got her up and running
Mantara said:
Yep. Rom issue. Bos needs to be factory reset after flash. Its odd but what needs to happen to boot initially.
Click to expand...
Click to collapse
Oh well, thats why its not a final build.
Thanks again guys.
I suggest that all HC roms have a boot splash screen that simply states "This is an Alpha build, please on't expect everything to work like you want it to"
People keep having these delusions that the HC roms will work perfectly...
whodatxevg said:
It wont boot without a data reset AFTER the initial boot. I dont think its normal to have to do a data reset after a rom is already installed but that seems to be a rom issue
Click to expand...
Click to collapse
No it's not a rom issue.
As I explained on my website, the problem is that nvflash DOES NOT wipe out your data. When you nvflash a new stock rom, the data from the previous rom is still there. Some are not compatible with the stock rom, so the left over data cause an interruption in the normal boot process. Sometimes, it bootloops. Sometimes, you are kicked into permanent apx mode.
That's why in my code red procedure I told you to wipe data/factory reset RIGHT AFTER you nvflash.
There's a purpose to the way I ordered my instructions.
Better read the instructions better next time. Could have saved you hours of frustration.
And yes, it is normal to wipe data before you flash a new rom. Since nvflash doesn't wipe data, you have to wipe data manually after you nvflash. It's the same as wiping data before you flash the stock rom.
There have been cases with bos where full wipes were done (as far as were stated in the posts but we know no one ever lies right?) and it would bootloop untilled full wipes were done again. Who knows.
Personally I wipe and repartition every time I flash a new rom. If its an update I leave it, if its a new rom I start from a clean slate. I use titanium backup almost daily and have copies of my recovery backup on my PC weekly. Its slightly time consuming but unborking takes a hell of a lot longer than being extra cautious when flashing
I changed from an iPhone 4 in May to the Samsung Note. On my iPhone I would immediately jailbreak and install MyWi. In my research to do the same on the note I ran across a rooting tutorial for my device and followed the instructions http://www.androidauthority.com/galaxy-note-att-i717-root-without-increasing-flash-counter-61325/ (I am not positive, but I feel confident this is the one I followed). I installed Superuser and Titanium Backup, did a backup of ATT connection manager, then removed it. Tethering worked like a charm. This has worked and I had no issues until Friday June 14th.
On Friday, everytime I opened an app on my phone I would get a Force Close. I restarted the phone and watched as it repeatedly happened after every cycle. Believing that installing Droid VNC Server was the issue, the last app I had installed, I removed it successfully and included others I didn’t use. Upon reboot, I noticed the notification of App Updates and a missed call. Checked the application list and noticed that all of the apps I had just removed were still there. I have a ton of pics and videos and thought that I should back them up immediately before I deleted them, prepared for the worst. I was able to do that. I deleted them all, nothing in the gallery. When the phone crapped out again and rebooted, all apps and all pictures back.
I formatted the USB Storage, seemed to delete nothing and also showed the same amount of used space as before.
Time for a restore. I know now that the recovery partition is gone and so a Wipe/reset is fruitless. No problem. I know how to flash the rom. I used this method with Odin. http://forum.xda-developers.com/showthread.php?t=1506330
Everything seemed to work successfully, but upon reboot I get the same app updates notification and the same missed call notification. The same frozen state my phone was in when the issue started on Friday. WTH!
I have everything backed up. How do I get back to stock? I could care less about the counter. I just want my phone to be usable again.
ryantaylor16 said:
I changed from an iPhone 4 in May to the Samsung Note. On my iPhone I would immediately jailbreak and install MyWi. In my research to do the same on the note I ran across a rooting tutorial for my device and followed the instructions http://www.androidauthority.com/galaxy-note-att-i717-root-without-increasing-flash-counter-61325/ (I am not positive, but I feel confident this is the one I followed). I installed Superuser and Titanium Backup, did a backup of ATT connection manager, then removed it. Tethering worked like a charm. This has worked and I had no issues until Friday June 14th.
On Friday, everytime I opened an app on my phone I would get a Force Close. I restarted the phone and watched as it repeatedly happened after every cycle. Believing that installing Droid VNC Server was the issue, the last app I had installed, I removed it successfully and included others I didn’t use. Upon reboot, I noticed the notification of App Updates and a missed call. Checked the application list and noticed that all of the apps I had just removed were still there. I have a ton of pics and videos and thought that I should back them up immediately before I deleted them, prepared for the worst. I was able to do that. I deleted them all, nothing in the gallery. When the phone crapped out again and rebooted, all apps and all pictures back.
I formatted the USB Storage, seemed to delete nothing and also showed the same amount of used space as before.
Time for a restore. I know now that the recovery partition is gone and so a Wipe/reset is fruitless. No problem. I know how to flash the rom. I used this method with Odin. http://forum.xda-developers.com/showthread.php?t=1506330
Everything seemed to work successfully, but upon reboot I get the same app updates notification and the same missed call notification. The same frozen state my phone was in when the issue started on Friday. WTH!
I have everything backed up. How do I get back to stock? I could care less about the counter. I just want my phone to be usable again.
Click to expand...
Click to collapse
did you try wiping Catche and Dav?
Wipe Catch > Wife Davlik > Fix Permision, then reboot ..
see what happens ..
Not a noob, but here is where i am lost
I booted in to recovery, chose to Wipe/Erase . I see no option to Wipe Davlik except for in SuperUser and there it is a paid option, not sure where to find Fix Permission and then reboot?
I am assuming these are all options for CWM. I attempted to put CWM on an SD card last night and install from ZIP, but Recovery does not seem to see the SD card.
Are these options that are available for CWM, if so I will push through until I get it to work, but I have had no luck to this point.
UltimateEnd said:
did you try wiping Catche and Dav?
Wipe Catch > Wife Davlik > Fix Permision, then reboot ..
see what happens ..
Click to expand...
Click to collapse
ryantaylor16 said:
I booted in to recovery, chose to Wipe/Erase . I see no option to Wipe Davlik except for in SuperUser and there it is a paid option, not sure where to find Fix Permission and then reboot?
I am assuming these are all options for CWM. I attempted to put CWM on an SD card last night and install from ZIP, but Recovery does not seem to see the SD card.
Are these options that are available for CWM, if so I will push through until I get it to work, but I have had no luck to this point.
Click to expand...
Click to collapse
no need to go back to stock .
try reflashing whichever ROM you desire...
its always wise to follow every little STEP given by the DEV .
to wipe dav you go to advance and it should be there..
Sorry, still need assist
UltimateEnd said:
no need to go back to stock .
try reflashing whichever ROM you desire...
its always wise to follow every little STEP given by the DEV .
to wipe dav you go to advance and it should be there..
Click to expand...
Click to collapse
I have attempted to Flash ROMs I don't desire just to move forward. They all flash and pass in Odin but on reboot I still have my default screen. Unfortunately, I want to go back to stock. I have done plenty of research and need something more to push on to the next thing. I am looking at phone and there is not an Advanced option in recovery. I have read there are options in CWM but I am looking at what I believe is the stock recovery options.
ryantaylor16 said:
I have attempted to Flash ROMs I don't desire just to move forward. They all flash and pass in Odin but on reboot I still have my default screen. Unfortunately, I want to go back to stock. I have done plenty of research and need something more to push on to the next thing. I am looking at phone and there is not an Advanced option in recovery. I have read there are options in CWM but I am looking at what I believe is the stock recovery options.
Click to expand...
Click to collapse
after you are rooted ,
you should have nothing to do with Odin.
and also, if you were stuck on your phone trying to boot up, chances are you keep downloading a bad ROM..
happen to me before..a ROM that was suposed to be 192MB,
would finish on 158MB
someone else may be able to help you get back to stock ROM..i havent had the chance to ever wanna go back to stock so i wouldnt know for sure.
sorry and good luck .
Still Worried. Still Stuck
ryantaylor16 said:
Time for a restore. I know now that the recovery partition is gone and so a Wipe/reset is fruitless. No problem. I know how to flash the rom. I used this method with Odin to undo root. http://forum.xda-developers.com/showthread.php?t=1506330
Everything seemed to work successfully, but upon reboot I get the same app updates notification and the same missed call notification. The same frozen state my phone was in when the issue started on Friday. WTH!
I have everything backed up. How do I get back to stock? I could care less about the counter. I just want my phone to be usable again.
Click to expand...
Click to collapse
OK, I am still stuck and so I will wait for someone else to reply. Thanks for your help though
ryantaylor16 said:
OK, I am still stuck and so I will wait for someone else to reply. Thanks for your help though
Click to expand...
Click to collapse
U need to do what he said he is every well known on xda...install cwm to ur internel memory not sd card and ur phone has to see it!
Btw if u want to get back to bare bone stock look for att b4 tar file if u cant find it let me know ill link it
cm9
Use this?
JB calhoun said:
U need to do what he said he is every well known on xda...install cwm to ur internel memory not sd card and ur phone has to see it!
Btw if u want to get back to bare bone stock look for att b4 tar file if u cant find it let me know ill link it
cm9
Click to expand...
Click to collapse
Would you say this is a good tutorial to follow?
http://rootgalaxynote.com/galaxy-no...-on-att-galaxy-note-sgh-i717-belltelusrogers/
So, maybe I am a newb. I have followed the instructions to install CWM on my device and it even says it was successful. I am doing it from ODIN. See the file I downloaded here. Says it was successful but holding the volume up and then power button. NO CWM.
I am truly frustrated but I want my phone back. Can someone link me to the stupid people posts so I can get my phone working again?
bump
CWM Problems
Hi,
Have you looked at these posts? Sounds like you may be using the
wrong key combo to start CWM?
http://forum.xda-developers.com/showthread.php?t=1586223
http://forum.xda-developers.com/showthread.php?t=1483113
Are you confident that your uSD card hasn't been corrupted?
Peter
ryantaylor16 said:
So, maybe I am a newb. I have followed the instructions to install CWM on my device and it even says it was successful. I am doing it from ODIN. See the file I downloaded here. Says it was successful but holding the volume up and then power button. NO CWM.
I am truly frustrated but I want my phone back. Can someone link me to the stupid people posts so I can get my phone working again?
Click to expand...
Click to collapse
ryantaylor16 said:
bump
Click to expand...
Click to collapse
You now have a custom recovery(according to Odin). The problem is, you're doing the wrong key combo as stated above. You can also go to the market and grab FJ's power tool. You can boot into recovery directly from the app. Good luck.
Certainly I am not this dumb..... am I
froidroid said:
You now have a custom recovery(according to Odin). The problem is, you're doing the wrong key combo as stated above. You can also go to the market and grab FJ's power tool. You can boot into recovery directly from the app. Good luck.
Click to expand...
Click to collapse
Still having issues. Here is the deal.
I have the phone in Download mode
https://www.dropbox.com/s/dnk6ekjqp9vddev/2012-06-19 19.40.01.jpg
I load the CWM Recovery in the PDA box. Start the flash, get a pass. All looks good to me.
https://www.dropbox.com/s/5q4hayf35mm26wr/odin-success.PNG
I immediately attempt to access CWM Recovery by holding the power, vol+ and vol- and still get the default recovery
https://www.dropbox.com/s/d176blydonlvrlu/2012-06-19 20.13.42.jpg
I am so confused as to what I am doing wrong.
Unfortunately those pics aren't loading for me. Try again with the pic of recovery and the file you're flashing. Thanks. If you still have stock recovery then maybe that's what you're flashing in error.
Try volume up + down and power button. When phone vibrates, release power button but keep holding volume buttons until you are in cwm.
I would use Odin to flash cwm touch recovery from pda, then load a rom via cwm. Using that method you don't even need to root because it's all done at bootloader level and root is built in to the custom rom you flash
SGH-i717 mesosphere-remix
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
bump. Please, need help.
ClipTy said:
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
Click to expand...
Click to collapse
if you dont have cwm installed, i assume that you flashed that rom while in bootstrap recovery because you didnt state that the phones bootloader was unlocked.That particular rom is an unlocked only rom, which is why you're stuck in that loop. If I'm right and you flashed that rom via bootstrap, you should be able to get back into it by powering down the phone, holding power and volume down, then using the volume down key to cycle through the options until you hit 'android recovery', then press volume up to boot into it.
At that point, go to mounts and storage, mount usb storage while phone is plugged into your pc, and place this rom:
http://forum.xda-developers.com/showthread.php?t=1648297
On your sd card. After this, go back into mounts and storage and wipe data, system, and cache. Flash the rom you just placed onto your sd card and reboot.
Again, this is all asuming you installed bootstrap recovery, if I'm wrong let me know and ill try to help you further.
I forgot to add, you're also going to need to download a stock blur kernel and place that on your sd card aswell, flashing it after you flash the rom. I can't remember where to find the stock blur kernel but give me a second and ill try to find it for ya.
I don't find that very professional. I think the best you can do is tell me which section it belongs in. At least Acvice offered help...
Thanks you so much! I knew I would have to flash the stock stuff, but I just couldn't find it! Yes, I used bootstrap as I thought it was the only means of getting into cwm. I wont be screwing around after this. Only problem is, the phone is dead! I need to charge it again lol. Thanks for helping. Ill let you know the outcome later.
Acvice said:
*snip*
Click to expand...
Click to collapse
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
ClipTy said:
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
Click to expand...
Click to collapse
Meh, you just flashed something you shouldnt have is all. It honestly happens to all of us. You learn the most by screwing up your phone haha.. Figured i would have you try that method as it would have gotten you a nice fast rom and also fixed your problem. But it looks like youre just unlucky. Were just gonna have to get ya back on stock by flashing an SBF.
1) Download the Windows Moto drivers and install them. Make sure you choose 32bit or 64bit, respectively. (quick google search)
2) Download RSD Lite (quick google search)
3) Download the SBF located here and unzip it.
Use this video to guide you through. Some of his links are outdated which is why i linked the one above. If you are used to ODIN on Samsung devices, you'll probably already know what to do as it's the same kind of program. Good luck. Let me know how it goes.
I've tried RSDLite with an Sbf before, it never succeeded.
Sent from my HTC Sensation using xda app-developers app
Is it possible to flash an sbf with a low battery? If not, how can I charge this thing?
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.