Related
Hi guys
I've been facing since I bought my HTC Athena irregular freeze everyday.
I upgraded the Device to WM6 the next day I received it, it went very soomth with my applications installed.
However, the freeze appear very randomly, it could be while launching a new program, or playing backgammon, sometimes after device wake up, also once when received an SMS.
A very weird behavior also, is that sometimes I need to soft-reset 3/4 times in a row to get passed the HTC and the Windows Mobile splash screen.
For info, the soft-reset is not necessarly done after a freeze ....
I decided to start this new topic in order to see if other people are facing same symptoms on their Athena, and to share our experience together.
Cheers
Hope you run Oli's SPL Unlocker/patcher...
BigDede said:
Hi guys
I've been facing since I bought my HTC Athena irregular freeze everyday.
I upgraded the Device to WM6 the next day I received it, it went very soomth with my applications installed.
However, the freeze appear very randomly, it could be while launching a new program, or playing backgammon, sometimes after device wake up, also once when received an SMS.
A very weird behavior also, is that sometimes I need to soft-reset 3/4 times in a row to get passed the HTC and the Windows Mobile splash screen.
For info, the soft-reset is not necessarly done after a freeze ....
I decided to start this new topic in order to see if other people are facing same symptoms on their Athena, and to share our experience together.
Cheers
Click to expand...
Click to collapse
Sorry no such problems here, but did you run Olipro's SPL patcher/Unlocker before flashing thee ROM? I know tupsindin released a few WM6 ROMs a while ago that could be flashed without CID unlocking your X7500, but Olipro's Unlocker will make your device unbrickable.
If you have already done this, try flashing the new WM6 Dopod U1000 ROM seems very stable to me with no issues so far and slightly snappier than the other WM6 ROMs.
Thks mackaby for your reply
I did unlock it via the UK website I found on XDA forum, sorry but can't remember the name (soemthing IMEI), so I did that then flashed with the WM6 ROM ver 2.20.405.1
Im doing some more testing
what is really annoying is that I need to do 4/5 soft reset very ofently in order to pass by the HTC/Windows Mobile splash screen
I just bought my HTC Advantage X7500 with WM6 already installed and I have lock up issues if I have auto shutoff enabled it will not start backup after a auto shut off I keep using the reset to get it back up. When it is up I just disabled the auto shut off and now have no problems.
Im not having same pb as you, but I saw on one thread on XDA forums that people having that problem fixed it by assigning a the turn on/off device to a hardware button. and apparently it fixed their problem.
Try that and it must fix it for you
BigDede said:
Hi guys
I've been facing since I bought my HTC Athena irregular freeze everyday.
I upgraded the Device to WM6 the next day I received it, it went very soomth with my applications installed.
However, the freeze appear very randomly, it could be while launching a new program, or playing backgammon, sometimes after device wake up, also once when received an SMS.
A very weird behavior also, is that sometimes I need to soft-reset 3/4 times in a row to get passed the HTC and the Windows Mobile splash screen.
For info, the soft-reset is not necessarly done after a freeze ....
I decided to start this new topic in order to see if other people are facing same symptoms on their Athena, and to share our experience together.
Cheers
Click to expand...
Click to collapse
Hi,
I have encountered in the past this problem, and I observed that it was happening after I installed HTC X-Button v1.5, and it was even worse after HTC X-Button v1.51.
Later on, a new version was published, and it works flawlessly since. The exact file is HTC X-Button v1.51 build 30229.
Hope you have same issue. Good luck,
Zohar
Thks zoharbl for you reply
I don't have HTC x-button
For now, I found an alternative with Running Pocket Hack Master at 663 Mhz, and I modified the sequence for startup processes using SKTools putting Pocket Hack Master as #1 in the order, Wisbar Advance 3 as #2, SPB Diary as the last one and Norton Antivirus just before the last one.
I noticed that SPB Diary is slowing down a bit my device, and specially after a reset, this is because I created custom tab adding plugins inside this tab such Phone Alarm, SPB Weather and Resco Explorer Plugin ...
I tried many config, and found out this one works the best for me, the device is resetting with less then 30 sec without any hanging anymore.
zoharbl said:
and I observed that it was happening after I installed HTC X-Button v1.5, and it was even worse after HTC X-Button v1.51.
Click to expand...
Click to collapse
Really interesting comment. I have original WM5 configured UK Ameo and have always experienced random crashes. After reading this, I looked again at my settings and found the X-button configured - I don't need it as I use the same functionality from Wisbar. Turned it off and it hasn't crashed since.
You learn something every day
BigDede said:
For now, I found an alternative with Running Pocket Hack Master at 663 Mhz, and I modified the sequence for startup processes using SKTools putting Pocket Hack Master as #1 in the order, Wisbar Advance 3 as #2, SPB Diary as the last one and Norton Antivirus just before the last one.
I noticed that SPB Diary is slowing down a bit my device, and specially after a reset, this is because I created custom tab adding plugins inside this tab such Phone Alarm, SPB Weather and Resco Explorer Plugin ...
I tried many config, and found out this one works the best for me, the device is resetting with less then 30 sec without any hanging anymore.
Click to expand...
Click to collapse
Hi there BigDede
Don't know if this will help...
Even since before I have upgraded to WM6 I have had problems similar to yours. At the time I had WA3 and WAD installed as well as Spb Weather, Spb Diary and certain parts of Pocketplus. I did a trail and removed all software from Spb and Wisbar and everything worked perfectly. In the meantime I have now only added Spb Mobile Suite and use iLauncher on my today screen together with the plugin from Resco Explorer - no more problems!
It seems to me that some of the above software have compatibilty issues with the U1000/Athena/Ameo (whether wm2005 or wm6 makes a difference I don't know).
Cheers
Thks Superdawie for your reply, you are right, I was suspecting Wisbar, SPB Diary abd phoneAlarm to be the origin of my problems.
But as I said previously, I found a workaround to make the Athena runs ok by playing with the order of startup programs. It's been more then one week without any freeze
Mrsums said:
Really interesting comment. I have original WM5 configured UK Ameo and have always experienced random crashes. After reading this, I looked again at my settings and found the X-button configured - I don't need it as I use the same functionality from Wisbar. Turned it off and it hasn't crashed since.
You learn something every day
Click to expand...
Click to collapse
Same for me, working well on WM6 since I turned X-Button 1.51 off.
In WM5 I had this problem all the time as WM5 totally sucks!
In WM6 I only experienced this problem when programs "collided" due to timing issues as you've found out. By changing the load order or timing of some applications (some programs have it built right in like SmallMenu....it's resolved all of my lock up issues, etc. Most of the problems can be resolved by playing around with the software you have loaded, as you found out. Not sure if it's because of a crappy OS or because of crappy coding by the developers of the software we're installing...maybe both.
I've enjoyed dcd's work since I first found his Alltel clean ROM. Really made my Mogul run like it is supposed to. After I saw the dcd kitchen was released I started customizing it to the base I need start loading my own custom apps.
I've changed a few minor things and added these apps:
Wktask
Quickmenu
HTC Home
HTC Audio Manager
HTC Camera Album
Ledkiller 3.1
Pocket Rar
Some of the applications are customized a little bit to what I normally use. This was built with Sprint as the carrier in the kitchen.
DISCLAIMER: If you don't know what you are doing with flashing your phone then don't bother with this, you are responsible for your own actions here.
http://rapidshare.com/files/76436510/digi_1_dcd_161.exe.html
just installed, works great so far. thanks!
angellt said:
just installed, works great so far. thanks!
Click to expand...
Click to collapse
The only thing I noticed with mine the other day was I had switched my phone to roam only and it locked up my phone again after an hour or so. But I've had issues with setting it to roam only with every single ROM and radio version I've tried.
Has anyone compared DCDs newest ROM (3.3.4) to the latest nueROM3? Now that Scrosler is no longer going to produce new ROMs for us, I am running Update 20 of Manila 2D on nueROM3 (produced via kitchen). However, just curious how that compares, as far as stability goes, to DCDs latest. I always liked DCDs work, but had to start using nueROM awhile ago because of memory.
Anyone ran the latest of these two and can offer an unbiased opinion?
I've been doing my own M2D+nueROM3 for a while now.
I have to say, if you spend the time and patience, you can end up with a beautiful build. I'm very happy with mine right now.
As far as comparing to DCD 3.3.4, I haven't messed with 3.3.4 and refuse to do so without the kitchen.
Do you have an opinion on the new PocketIE yet?
scrawnyb: I'm finding the same thing so far, not too bad with latest nueROM3 + Manila 2D Update 20, but since DCDs ROMs are usually very stable, just wanted to see what others thought.
Personally, I think the new IE looks good, but it is just TOOOOO slow! Obviously was designed for a machine with more memory. So most of the time I just stick with Opera Mini; however, there are times when I have to use IE simply because the site only works on IE, or it is simply safer to use a stand-alone browser (like when going to mobile bank site). Personally, I wish I could reinstall the old IE Mobile - you know of a way to do that with nueROM3?
I perfer nuerom's memory management over DCD 3.3.4. Not to mention being able to turn the camera off and start at 28 megs free.
After trying both for a week without M2D installed and a week with M2D installed I find that 3.3.4 has pretty much no memory leaks, where 3pre3 had terrible memory leaks. 3.3.4 would boot for me at about 27 Mb and after a few days wold only leak down to 25 at idle (few days without a soft reset). Same situation with 3pre3 would have me booting at 32 Mb and leaking down to about 25 after a few days (no soft reset either).
With M2d installed and configured how I like, 3pre3 would boot at 26Mb and would leak down to about 21 Mb by the end of the day. 3.3.4 with the exact same configuration boots at about 21Mb and after a few days has not leaked down past 20 Mb.
I took all memory samples the same way: Fresh installs of ROMs, added my preferred cabs (Java, one game, skyfire, etc...) soft reset then waited for full boot. Closed all programs in task manager and used oxios hibernate. Then after a few days, just soft reset and used oxios hibernate. Then I did the same process, (I started with a hard reset on both ROMS) and installed the same apps and then M2D without opera mobile.
Only thing I wished I would have done was to take screen shots so I could have posted them.
Although 3pre3 does have more RAM at boot in both cases,I think I am still going to run 3.3.4 until the next version of nuerom comes out to try. I dont mind soft resetting every day, but if i ever forgot to with 3pre3 i would eventually get some out of memory error messages until I reset. So far after about a week with 3.3.4 I have not had any error messages after a few days just closing apps down, no reset.
DCD just has rock solid ROMs, what more can we say but a big Thank you?
I forgot to mention that 3pre3 with camera enabled had less available RAM than 3.3.4 in both cases. Only 1~2 Mb difference but it was worth mentioning.
Also I cooked different versions of ROMs with M2d in the kitchen and they were the absolute worst on memory leaks. I still use cab installs from the M2d thread, still using update 19b files and procedure. seems to work good on my device.
kdj67f said:
After trying both for a week without M2D installed and a week with M2D installed I find that 3.3.4 has pretty much no memory leaks, where 3pre3 had terrible memory leaks. 3.3.4 would boot for me at about 27 Mb and after a few days wold only leak down to 25 at idle (few days without a soft reset). Same situation with 3pre3 would have me booting at 32 Mb and leaking down to about 25 after a few days (no soft reset either).
With M2d installed and configured how I like, 3pre3 would boot at 26Mb and would leak down to about 21 Mb by the end of the day. 3.3.4 with the exact same configuration boots at about 21Mb and after a few days has not leaked down past 20 Mb.
I took all memory samples the same way: Fresh installs of ROMs, added my preferred cabs (Java, one game, skyfire, etc...) soft reset then waited for full boot. Closed all programs in task manager and used oxios hibernate. Then after a few days, just soft reset and used oxios hibernate. Then I did the same process, (I started with a hard reset on both ROMS) and installed the same apps and then M2D without opera mobile.
Only thing I wished I would have done was to take screen shots so I could have posted them.
Although 3pre3 does have more RAM at boot in both cases,I think I am still going to run 3.3.4 until the next version of nuerom comes out to try. I dont mind soft resetting every day, but if i ever forgot to with 3pre3 i would eventually get some out of memory error messages until I reset. So far after about a week with 3.3.4 I have not had any error messages after a few days just closing apps down, no reset.
DCD just has rock solid ROMs, what more can we say but a big Thank you?
I forgot to mention that 3pre3 with camera enabled had less available RAM than 3.3.4 in both cases. Only 1~2 Mb difference but it was worth mentioning.
Also I cooked different versions of ROMs with M2d in the kitchen and they were the absolute worst on memory leaks. I still use cab installs from the M2d thread, still using update 19b files and procedure. seems to work good on my device.
Click to expand...
Click to collapse
Very nice testing and detailed.
Thanks
tssi said:
Very nice testing and detailed.
Thanks
Click to expand...
Click to collapse
Agreed very nice work I used nueROM3 and DCD and am sticking with 3.3.4 but thats just my two cents
My testing may be skewed slightly and I apologize. I cooked MSVC into 3pre3 and have been reading that has a few memory leaks. 3.3.4 has no voice command, and it would not be fair to add a cab VS. cooking with an oem between the two ROMs. I also added MS office apps for work by cab to 3pre3, although they did not seem to have any memory leaks as far as I could tell.
I was trying to be as subjective as possible, but those were two Items I had completely forgot about this morning when I typed this
Also, if running M2D I always disable the weather, search and music tabs as I launch programs from the launcher tab to do these tasks. The weather tab alone causes much memory leakage and always has since I first ran M2D. Also I quit installing Opera mobile because it hogs memory and messes with HTML file opening, so I have been using the new M2DC program to map the internet tab to opera mini, which runs great.
When it comes down to it, I guess it is hard to compare two great ROMs from different builders as for the end user (me in this case) the programs were installed differently with different versions in different ways.
Sorry if I mislead anybody, but my setup with 3.3.4 seems to be more stable still. Maybe I should write a tutorial for how I got my device set up with success I really have not done anything super fancy with programming, and have not touched the reg editor with either rom. I think the average user like me would benefit from using DCD's latest if they like M2D.
Just my .02
I tried 3.3.4 for a few days after using pre3 for about a month. I always like DCD ROMs, but I also like having more memory. On 3.3.4, I found that windows mobile would close opera when I changed opened other programs, while this would happen less so with pre3.
A few days later, the new nueROM came out. I tried it for a few days, but the internet explorer drove me crazy. I use Beyondpod for podcasts, and that program is based on internet explorer. It changed Beyondpod layout (which I learned how to fix in the registry), and seemed to have more connection problems.
So now I am back to pre3. My biggest complaint is nueROM has that touch-like finger scrolling, which I hate cause it means I can't highlight. I've looked high and low over the internet to no avail.
as far as memory leaks, I have to phone set up to reset every 4am (and close my flashcard program). I never really checked to see how much leaking there is, and just started the daily resets a couple of days ago.
kdj67f said:
My testing may be skewed slightly and I apologize. I cooked MSVC into 3pre3 and have been reading that has a few memory leaks. 3.3.4 has no voice command, and it would not be fair to add a cab VS. cooking with an oem between the two ROMs. I also added MS office apps for work by cab to 3pre3, although they did not seem to have any memory leaks as far as I could tell.
I was trying to be as subjective as possible, but those were two Items I had completely forgot about this morning when I typed this
Also, if running M2D I always disable the weather, search and music tabs as I launch programs from the launcher tab to do these tasks. The weather tab alone causes much memory leakage and always has since I first ran M2D. Also I quit installing Opera mobile because it hogs memory and messes with HTML file opening, so I have been using the new M2DC program to map the internet tab to opera mini, which runs great.
When it comes down to it, I guess it is hard to compare two great ROMs from different builders as for the end user (me in this case) the programs were installed differently with different versions in different ways.
Sorry if I mislead anybody, but my setup with 3.3.4 seems to be more stable still. Maybe I should write a tutorial for how I got my device set up with success I really have not done anything super fancy with programming, and have not touched the reg editor with either rom. I think the average user like me would benefit from using DCD's latest if they like M2D.
Just my .02
Click to expand...
Click to collapse
Could you write the tutorial? This would help out some of us.
TY in adv.
kdj67f said:
Sorry if I mislead anybody, but my setup with 3.3.4 seems to be more stable still. Maybe I should write a tutorial for how I got my device set up with success I really have not done anything super fancy with programming, and have not touched the reg editor with either rom. I think the average user like me would benefit from using DCD's latest if they like M2D.
Just my .02
Click to expand...
Click to collapse
TUTORIAL PLZX!
Well, after reading all this, I think I am going to reflash and give the new DCD ROM a try. Although nueROM3 is great, I also think there is some memory leaks somewhere - I go from 25MB sometimes down to 13MB with nothing but M2D loaded, even without VC - plus, I hate the new IE! It is so VERY slow - I use Opera Mini but for the times I absolutely need to use IE I can't with this new version.
I'll let you know what I think once I run it for awhile.
Well, I am thinking about going back the other way, as when I installed windows live cab I always use, it really ****ed up my contacts. it attached all my onlive hotmail contacts to existing entries in my phonebook, none of which were correct. This means windows live (3 different current versions I have tried) messenger does not work, as does dialing by name. there are too many additions to the contact list. I hard reset 3.3.4 and reloaded all my contacts and went through the whole install again and it still occurs.
Great ROM, but tha twas a deal breaker. I think I may try 3pre3 again, but try tweaking it all i can to keep those memory leaks down. At least then I can keep my contacts seperated
I am not writing a tutorial here, that was kind of a joke. there are tutorials for loading cabs for any program you would like on here, just search and find them. Me finding problems weeks after loading roms is why I am no developer by any means. Saved you all the hassle of re-writing your contcts!
kdj67f said:
Well, I am thinking about going back the other way, as when I installed windows live cab I always use, it really ****ed up my contacts. it attached all my onlive hotmail contacts to existing entries in my phonebook, none of which were correct. This means windows live (3 different current versions I have tried) messenger does not work, as does dialing by name. there are too many additions to the contact list. I hard reset 3.3.4 and reloaded all my contacts and went through the whole install again and it still occurs.
Click to expand...
Click to collapse
Windows live synced contacts IS a major snafu. But hey, you get what you pay for. I use my Exchange for all my contacts. Never a problem.
Whenever I install windows live I ALWAYS uncheck sync contacts. The problem is that everytime you open up contacts on the mogul, it starts an internet connection to sync with your Live contacts. So your contacts look empty until it syncs. This can take a LONG time.
Hope this helps...
Chuck
XDA member tends to lean toward DCD because he releases his work here and is more geared toward stability.
If you start same same exact post over at ppcgeeks, I bet nueROM is preferred by users, cause he releases overthere.
bottomline
DCD = lean solid ROM, no flashy junk that usully causes leaks and problem ; for advance users
NueTOM = ROM with nice goodies; but goodies comes with baggage (i.e. few memory leaks, occasional crashes, soft reset); recommended for intermediate users.
Well, I am thinking myself about going back to nueROM. Not that I don't like DCDs work - it is great - but with 3.3.4 there still seems to be some memory leaks (keeps going down). I also heard that DCD kinda rushed the 3.3.4 release just to get it out there because of the pressure. Plus, I love the extra memory that nueROM gives me.
However, the one thing that really bugs me with nueROM is that in his latest unified kitchen he included that stupid new mobile IE browser - that thing is the slowest pig in the world! I use Opera Mini for most of my browsing, but when I do need IE it is just too frustrating. Would rather keep the old IE on there. Anyone know if there is a cab somewhere that will replace the new IE with the older mobile IE version.
Anyway, I may go back to nueROM for the time being but when DCD makes his next new ROM then I may try it again.
SimpTheChimp said:
Anyone know if there is a cab somewhere that will replace the new IE with the older mobile IE version.
Click to expand...
Click to collapse
I found this on the nueruom thread. I tried it with the latest neurom, and internet explorer seemed to work like the old IE. That of course didn't help me. My problem is with BeyondPod, my podcast player, which relies on IE for it's formatting. That was still messed up. So I am using nueROM pre3, which has the old IE. I am addicted to the extra RAM.
if using a kitchen, remove the folder BROWSINGIE from the core before cooking. The browser defaults to pIE instead of IE6.
Apparently, IE6 is just a bunch of plugins and junk that sits atop pocketIE. If you remove them, pie is still there.
Works better this way than installing a .cab, and I've found myself able to do all the stuff that ie6 broke (flash bundle, logmein, etc).
nueCPL Kernel
Hi all,
I just tried the nuerom -m for titan. Earlier I was on DCD 3.3.4, which i think is better than nuerom. One feature that i liked in nuerom is of - disabling camer and using high memory by nueCPL kernel. Is this possible on DCD Rom 3.3.4. It fress up almost 5mb of Ram and camera is used very rarely so it can be disabled. Any body to help.
Regards
Tarun
no you cannot rescue the RAM that the camera uses in dcd roms.
New ROM chef here... It's taken me a few weeks to get the hang of it, but I finally have a rom that builds, flashes and runs stable!
My Goals: to keep the Titan up to date with a clean, stable and fast rom
Details:
XIP 21041
SYS 21042 - built from Topaz Core and Iolite QVGA SYS.
Drivers/OEM - built from Sprint and DCD 3.2.6
Changes from 4/13/2009 build (21042)
1. Voice Command restored
2. updated htmlnote.dll - unread sms issue resolved
3. updated keyboard driver so that the special characters work on the Owners Info phone textbox
Issues:
1. The WMP video playback issue still exists... I haven't uncovered the reason yet???
Features:
1. Clean - no added OEMs beyond core
2. Fast - 21042 is blazing
3. Free Memory - I installed Oxios and I regularly have 26,000+ free after boot
4. IE6
Built using Bepe's kitchen and based off of DCD's 3.2.6 base - I haven't recreated all of 3.2.6, but it's getting there
TODO:
1. clean up Windows directory
2. upgrade control panels
3. tweak more of the registry
4. create kitchen
Downloads:
1. ROM via Rapidshare
2. DCD carrier cabs
As always, flash at your own risk! Let me know what you think
I have no idea why there hasn't been any replies on this, but I loaded this ROM and it seems to run fine. I'll post more info if I find anything wrong/nice/etc. about it.
21040 build gave me some issues with my UC. I'll give this one a try tommorow, is almost bedtime here now. but 26 at boot sounds good to me since i use m2d.
Can anyone provide a non-RapidShare mirror to the ROM? It keeps saying I'm already downloading a file even though I am not. RapidShare doesn't play well with my ISP.
I don't know if it was the new ROM or not, but my phone surprised me this morning!!!
Normally, when a call comes in, my PRIUS plays a generic ringtone while my phone plays a custom ringtone.
This morning, the custom ringtone came through my car speakers!!! It didn't play on my phone at all?
Is this a feature of the newer bluetooth stack in the OS? If so, I am loving it!
I am running the ROM right now and it has a lot of free memory. I have had no problems thus far.
nerdstrap said:
I don't know if it was the new ROM or not, but my phone surprised me this morning!!!
Normally, when a call comes in, my PRIUS plays a generic ringtone while my phone plays a custom ringtone.
This morning, the custom ringtone came through my car speakers!!! It didn't play on my phone at all?
Is this a feature of the newer bluetooth stack in the OS? If so, I am loving it!
Click to expand...
Click to collapse
I think when I was running Reloaded 1.3.4 the phone would wake up when I got a call but the only sound came through my Bluetooth headset. Maybe a headset works differently from the car though.
Just flashed it.
Only problem I've found so far is that, just like DCD 3.3.4, Windows Media Player will not play any videos.
I also noticed that IE isn't quite as smooth as it is in Skip's ROM.
Edit: Played with it a little more and it also seems to have the unread text messages issue that has been plaguing a lot of recent ROMs I've tried (Skip's also has it).
Does you ROM use "User Customization". It's so simple and powerful or is there something new and better? Creation of a bare install and let user add whatever they want.
What is UC? It is a feature contained in UC capable ROMs. A UC capable ROM extends initial customization to your SD card so you can load cabs and install XML files that are located there too. What this means is that once you get your customization scripts right, you can flash any UC capable ROM and all your apps and settings will be restored as part of the initial customization process whenever your SD card is inserted in the slot.
http://forum.xda-developers.com/showthread.php?t=366337
26+ after reboot is cool but what about running it normally. I constantly can't get anything over 10 during the day adn thats on a good day. After a long day of using it I am tired of resetting my device every like 3 minutes.
I had four freezes randomly throughout the day yesterday resulting in having to soft reset. Loved the free memory, but need some stability.
I haven't had it freeze up on me at all??? What programs are you using?
User Customization is installed.
I am going to fix the threaded sms unread problem and video playback today!
Has anyone ever had incoming text messages show up from "Sprint Operator"? It just started yesterday and it's weird... Its from a known person in my contacts too, but the number shows as 0???
nerdstrap said:
I haven't had it freeze up on me at all??? What programs are you using?
Click to expand...
Click to collapse
Nothing crazy. I am using:
HHC with the 6 tab plugin
Enlarged start menu
S2U2 1.50
1-Calc Lite
Ariel Battery
Finger Menu 1.10
nueLight
Oxios Memory
PdG touchflo 2 dialer
Total commander
TouchBack v 1_0
Google maps
The same stuff I run on every rom. Anything else that I use (media player, IE) were on the rom.
It tends to freeze up right after being removed from my cradle by my desk.
I run Nerdstrap's stock rom with Aerial battery and do not experience any freezing. Actually, this is probably the most stable and fastest rom I can remember running.
Thanks!
unL33T said:
Just flashed it.
Only problem I've found so far is that, just like DCD 3.3.4, Windows Media Player will not play any videos.
I also noticed that IE isn't quite as smooth as it is in Skip's ROM.
Edit: Played with it a little more and it also seems to have the unread text messages issue that has been plaguing a lot of recent ROMs I've tried (Skip's also has it).
Click to expand...
Click to collapse
the text messaging system in the more recent 6.1 builds is KILLING ME!! it's not just unread either, sometimes it won't save them (so if you soft reset, you lose stuff) or the the way it handles messages that couldn't be sent. (
But this sounds like a cool rom, and if I get some free time, I'll try it out. Though I'm probably gonna get a vogue soon. :/
--delete. wrong tab :x--
Is this WM6.5?
new build to be uploaded around 4pm...
fixed the unread sms
fixed the video playback
Cycomachead - sms can be lost during a soft reset if the registry has not been flushed. I use nuePowerCPL to commit the registry before I perform a soft-reset for this reason alone.
JukEboXAuDiO - 6.5 builds are number with 211###, this is still a 6.1 rom 210###
uploaded new version
1. fixed threaded sms unread issue
2. updated keyboard driver
3. didnt fix video playback in wmp
meh, screw wmplayback, just install TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB
Hi all - first post on xda - please be gentle ;-)
Can anyone suggest what may be the most stable setup on the HD2? the constant freezing is starting to make the phone unusable for me as I use it for work and before I move to something else I thought I'd ask some advice on a better setup.
I have had WM machines (pocket PC) for a long while mainly Ipaq and my last 4150 worked for years without a hitch - couple of screen taps and any info I needed was there quickly mainly excel spread sheets e-mails and schedule, the thing never missed a beat in years. The HD2 seemed the ideal phone replacement.
I have not gone mad with the phone it is pretty stock with a couple of usable mods (CHT and editor etc) every day or so, maybe twice a day I press the on button to bring up the lock screen and it freezes - always when I need it most - it freezes in a particular way ie I can see the taskbar at the top, MENU and PHONE on the bottom (which "react" when pressed but do not bring up the function) and blank screen in between - it needs a soft reset - I have installed the endkey long press which works but this always happens when I need the information quickly and waiting for it to reboot is not quick enough
I would dearly miss co0kies home tab and the couple of mods but if a standard ROM is the best so be it (was going to try the vodafone 1.72 ROM) - or is there a real stripped down ROM that is simple and stable removing all the baggage on the standard ROM. I've never done it but I'm not averse to having a go at cooking a ROM if it will get me what I need
I use all the "business" type functions - dont need twitter/facebook/footprints etc would really use the documents Tab
ROM 1.66.405.2 (76641) WWE
Radio 2.06.51.07
Manila 2.5.19211619.0
Co0kies home tab 1.8.5
CHT editor 1.8.5.1
Resco Registry add in
Resco explorer
Skype
SPB Backup
Avian waves BattlineSvc
Microsoft .NET CF 3.5
Windows marketplace
Each time it locks up I'm getting fed up of friends/colleagues swiping their Iphones at me going "look! mine doesn't do that"
I like the HD2 I'd like to be able to say "but yours doesn't do all this" with all the extra capabilities - instead I seem to be always rebooting - waiting for sense to launch
I don't want to lose the HD2 and its capabilities but If I cant get it to be a bit more stable the Desire is looking tempting or even (wash my mouth out with soap) an Iphone?
Any thoughts or suggestions would be really appreciated
My hd2 became unstable when i had cookies home tab, its been solid as a rock since I uninstalled it, give it a go, I don't miss it anyway.
oh, and if they want proof, my friend has had the same locking up issues on 6 replacement iphones. it crawls to a halt then refuses to react, so he has to wait until the battery goes flat as he can't reset it...
You might want to try moving up to the 1.72 wwe rom and try that with and without cht, perhaps even try rolling back to an older version of cht.
I used to suffer the lockscreen freezing on the stock 1.66 rom.
I cant remember if it persisted after moving to the 1.72 im afraid, I dont think it did though.....
Does it only freeze when using the cht lockscreens?
HardSPL your phone and flash-
http://www.vbnfiles.com/xda/g_lewarne/CleanEx/CleanEX%20Core655%203.50.7z
CHT works fine along with anything else I have thrown at the ROM!
Stable as a rock and is an excellent dive board into Android as well.
For extra "cut down" disable sense and run Resco today plug-in as your home screen.
I used to flash numerous times a week, but, I haven't changed a thing since 16th Aug and that's a record.
what version of CHT are you using as i had to revert back to v1.7 due to the latest one giving me problems...i would suggest to upgrade your Rom to 1.72 start fresh again and install all necessary apps you need one by one that way you can analyse if certain apps are conflicting causing the frezzing problem that you have ....if that doesnt work try a custom rom.
rp-x1 said:
My hd2 became unstable when i had cookies home tab, its been solid as a rock since I uninstalled it, give it a go, I don't miss it anyway.
oh, and if they want proof, my friend has had the same locking up issues on 6 replacement iphones. it crawls to a halt then refuses to react, so he has to wait until the battery goes flat as he can't reset it...
Click to expand...
Click to collapse
On the iPhone tell him to hold the sleep button + the home button for a few seconds... That should do the trick.
i had the exactly same issue on my second hd2 and had my phone sent in (also vibracall was sounding abnormally), i should get it back this week. i hope CHT works then, my first hd2 never had problems like that....
Thanks indeed for the info I did have a sneaky suspicion that CHT may be a problem, I will try the stock 1.72 and maybe try a few things one at a time see if it helps thanks again
ive had problkems that sound like that, the lockscreen disapears and you can see the screen you have behind, except you still have to slide to unluck . with the vbn rom my lockscreen problems dispaeared complelty. it still seemed to suffer from memory issues but for the most part it was stable.
i hardly use windows mobile anymore, as android is way more fun, and it never complains about not having anough memory
I would suggest couple of things:
- make sure, that all the additional icons (if any) and wallpapers used are in phone memory, i.e. not on sd card.
- using bsb tweaks You can disable wm 6.5 lockscreen and give s2u2 a try