http://dimice.ru/ACER_EUUv2.zip
Little instruction:
Replace file ACER_EUU.exe to file from this archive..
Run EUUFrontEnd.exe
Click NExt.. Wait..
Click Next..
Turn your phone into flash mode by pressing Camera + VolumeDown + Power/Reset (or Camera + Power/Reset if you have 2.x firmware)
Click OK
Tested on my Acer Neotouch, but use at your own risk
p.s. Sorry, i don't speak english well)
DimICE said:
http://dimice.ru/ACER_EUUv2.zip
Little instruction:
Replace file ACER_EUU.exe to file from this archive..
Run EUUFrontEnd.exe
Click NExt.. Wait..
Click Next..
Turn your phone into flash mode by pressing Camera + VolumeDown + Power/Reset (or Camera + Power/Reset if you have 2.x firmware)
Click OK
p.s. Sorry, i don't speak english well)
Click to expand...
Click to collapse
YESS!! thank you dimice you have done it again, brilliant =], now i can make the roms .amf.
Thanks DimICE. Great job.
that was quick! thanks DimICE
Thanks, Great job.
tnx for this update m8, keep the great work up!!
You did it again man!!!Thanks!
maybe it's a stupid question....
what's hacked 3.x? Any official new ROM is issued by Acer?
rafyvitto said:
YESS!! thank you dimice you have done it again, brilliant =], now i can make the roms .amf.
Click to expand...
Click to collapse
Hope your new ROM with Acer 3.0 could be released very soon.
jiyaqing said:
maybe it's a stupid question....
what's hacked 3.x? Any official new ROM is issued by Acer?
Click to expand...
Click to collapse
This is used for someone that need to flash by using another ROM Country.
THX for hacked exe
Fantastic! Thanks!
Yet again, thank you!!!
really nice!!!thx!!!
i just flash 3.003 , i feel really good.
but officeal rom without manila, u know i really love manila
nice work, thx
My s200 can"t boot after my uprom 3.003 Not bootloader not open
Thank you very much!
pong_2006 said:
My s200 can"t boot after my uprom 3.003 Not bootloader not open
Click to expand...
Click to collapse
Ouch! do you mean it is bricked ?
If you press simultaneously the power, volume down and camera buttons, there is no red led flashing ?
sin+ said:
Ouch! do you mean it is bricked ?
If you press simultaneously the power, volume down and camera buttons, there is no red led flashing ?
Click to expand...
Click to collapse
You dont need to press all does buttons to enter bootloader, press and hold only the camera button then reset, this will enable your device bootloader mode.
rafyvitto said:
You dont need to press all does buttons to enter bootloader, press and hold only the camera button then reset, this will enable your device bootloader mode.
Click to expand...
Click to collapse
This is correct for all ROMs except the last (v.3) stock one (don't know about yours v3 Rafyvitto).
In v3 you should press the 3 buttons: Volume down, camera and power up/down.
Related
I put in all my files in removable DISK :G... but when i press (Power+menu+vol.up) it only start BADA! how??? Please help. Thanks.
Is this your internal memory? And did you everything as you see on tutorial's picture?
learn to read -_-
If you can;t boot it then your BL is incompatible. I'm not going to explain everything again
Thank u for ur big efforts shadow for porting android on wave
GOD BLESS U
ya i think that's my internal memory. What u mean by BL imcompatible?.
john1995 said:
ya i think that's my internal memory. What u mean by BL imcompatible?.
Click to expand...
Click to collapse
BootLoader is not supported. Flash to another supported firmware. JID + JK1 works pretty good, at least for me.
I'm not a dev or computer expert, just a regular user, so I could be wrong...
Euhmm. I noticed something
Did you hold the keys in the order as you said? If so you indeed will only boot Bada.
You should hold vol up and menu first. after that you should press power so the BL gets the keys
I use JID & Hold Vol Up + Menu, press Power => BADA hizhiz
When i Boot ANDROID(power+call) ...it shows the galaxy s logo after that it shuts down or something ...it shows black screen ...Please help
Does firmware JID works? And when im trying to flash the .fota file, if i press vol down + camera + power, my wave wont go to download mode, it just shows blue and then green screen. Is is ok to flash with vol down + lock + power to enter download mode?
Thanks in advance.
john1995 said:
I put in all my files in removable DISK :G... but when i press (Power+menu+vol.up) it only start BADA! how??? Please help. Thanks.
Click to expand...
Click to collapse
plese tell android port for Wave 2 S8530
john1995 said:
ya i think that's my internal memory. What u mean by bl imcompatible?.
Click to expand...
Click to collapse
the best is xxjki
hi all .
i have a serious problem. i update my I9100G to ics and i stuck on Samsung logo.
and from the beginning i could not use 3 combo button to go ether in download mode or recovery mode.
can any one help me pleeeeeeeeeeeeeeeeaaaaaaaaaase!!!!!
jusper67 said:
hi all .
i have a serious problem. i update my I9100G to ics and i stuck on Samsung logo.
and from the beginning i could not use 3 combo button to go ether in download mode or recovery mode.
can any one help me pleeeeeeeeeeeeeeeeaaaaaaaaaase!!!!!
Click to expand...
Click to collapse
If you're 100% sure the three-button combo isn't working, try a USB Jig to get into download mode. From there, flash a stock ROM.
screamworks
screamworks said:
If you're 100% sure the three-button combo isn't working, try a USB Jig to get into download mode. From there, flash a stock ROM.
screamworks
Click to expand...
Click to collapse
thanx for replay.
yes i'm 100% sure and i make a USB jig myself and i'ts work fine for me.but the problem is what ever rom i flash it will stuck on Samsung logo.
any idea what can i do?
jusper67 said:
thanx for replay.
yes i'm 100% sure and i make a USB jig myself and i'ts work fine for me.but the problem is what ever rom i flash it will stuck on Samsung logo.
any idea what can i do?
Click to expand...
Click to collapse
please check the link below hope it will be of some help to u
http://forum.xda-developers.com/showthread.php?t=1457458
Sun90 said:
please check the link below hope it will be of some help to u
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
hey body yes i do that but steel not working. the 3 button combo not working for me . i read somewhere that i must wipe cache but if i can not go to recovery mode i cant wipe cache.
my phone is bricked and i can not go to recovery mode.
thanx for all
i found the solution.
it was my fault that the 3 button combo not working.
my phone it must be power off then must press and hold the V UP + Home then hold the power button and it will be go to recovery mode same for download mode.
but thanx for your replay .
jusper67 said:
thanx for all
i found the solution.
it was my fault that the 3 button combo not working.
my phone it must be power off then must press and hold the V UP + Home then hold the power button and it will be go to recovery mode same for download mode.
but thanx for your replay .
Click to expand...
Click to collapse
Thank you your post is very useful
jusper67 said:
thanx for all
i found the solution.
it was my fault that the 3 button combo not working.
my phone it must be power off then must press and hold the V UP + Home then hold the power button and it will be go to recovery mode same for download mode.
but thanx for your replay .
Click to expand...
Click to collapse
For download mode, it's V Down home and power
Sent from my Toaster using Tapatalk 2
Hi, firs sry for may bad english.
I download Proformance Rom (Proformance Rom { Long Battery Life + OC 1.15 Ghz + many more) from here.
And after i do everything like autor say, mobiles phone normali starts...after i reset phone, i can turn on phone.
When i press power button, there is vibratin for 1/2 sec, and notting happend...
Pls help me... THNX
EDIT:
i have locked BL
Do you did this before flash rom?
NOTE Since this Rom is using a custom kernel so it is only for UB if want to install on LB devices then just remove "boot.img" file from the zip file
Click to expand...
Click to collapse
Anyway I don't think is bricked when it vibrate. Try use flastool and flash stock rom.
First I set up where I deleted the boot.img, and everything is working OK, and then I went again to set rom, but I obviously marked with this boot.img
Now I can not turn on a cell phone, there is vibration, and when I go to a key combination power + volume down / up turns green or blue button for 3 seconds and that's it.
I think it just made the problem this boot.img
Can you please explain in more detail what should I do? thanks
ArterBO said:
First I set up where I deleted the boot.img, and everything is working OK, and then I went again to set rom, but I obviously marked with this boot.img
Now I can not turn on a cell phone, there is vibration, and when I go to a key combination power + volume down / up turns green or blue button for 3 seconds and that's it.
I think it just made the problem this boot.img
Can you please explain in more detail what should I do? thanks
Click to expand...
Click to collapse
the rom you are trying to use need unlocked bootloader ..... its a soft brick which u are facing , use flashtool to flash a stock ftf and dun keep on trying to turn on ur phone now , u'll just drain the battery which will make the process more complicated ....
To sum up :-
1) the error is fixable.
2)download official firmware ftf
3)flash it using flashtool
4)next time unlock bootloader before trying to flash a rom which uses custom kernel
Hello,
thank you all for your help.
I solved the problem on my way, so I unlocked the bootloader, and a cell phone power on without any errors.
Thank you all again.
Greeting from Croatia
ArterBO said:
Hello,
thank you all for your help.
I solved the problem on my way, so I unlocked the bootloader, and a cell phone power on without any errors.
Thank you all again.
Greeting from Croatia
Click to expand...
Click to collapse
its better to press thanks button to say thanks in xda
My phone has a TWRP boot loop and can't enter into download mode
Tried:
-restoring old stock
-flashing new rom
-TOT back to stock
HELP?!?!?!
Hmong_Xiong said:
My phone has a TWRP boot loop and can't enter into download mode
Tried:
-restoring old stock
-flashing new rom
-TOT back to stock
HELP?!?!?!
Click to expand...
Click to collapse
check out lgg3root.com it has a great video on this
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Any luck dude? This just happened to me....totally blows
budven said:
check out lgg3root.com it has a great video on this
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Click to expand...
Click to collapse
jesse550 said:
Any luck dude? This just happened to me....totally blows
Click to expand...
Click to collapse
Yeah, so, one common mistake (I think) most people are doing is holding the power button. So to get into download mode:
1. Hold Vol Up ONLY (as Zedomax did)
2. Plug USB in while holding Vol Up
-Power button has nothing to do with this
Thanks for the quick reply dude, really appreciate it. I actually did get it to work, was just hoping there was another way to prevent the full wipe lol
Hi guys, as known as, we now can install the bump recovry with autorec easily and it has worked very well.
On another side, i care about how to enter rec by using hardkey. I have looked at 3 ways to do its on 4rum and some Source , but not working (they tell that hold down vol- & power, then release power/release vol-/ both...and push down again..bla ...bla).
They all not work on my case
And finally i found a right way to do. and i want to share for anyone like me, can't go recovery like some guide have known before.
1. Please shutdown ls990 completely.
2. Hold down (Vol-) and (Power) togrther.
3.DON't release any thing-it's diffierent.
4. When you see "recovery" showed on the screen (after LG booting screen), now release both of button.
Now you will know what you want to do.
Thanks for reading. Hope it will helpfull for you, however.
I can't boot to recovery by this way, I had to press Vol (+) and POWER to boot to recovery... weird
Click to expand...
Click to collapse
Thank u very much......this worked for me
Thank u very much..
Thank you
So glad I found this. Thanks a million.
I can't boot to recovery by this way, I had to press Vol (+) and POWER to boot to recovery... weird
oh, does it?
I'm going to update my threat with your solution, if you not afraid?
Thank you.