Related
Thanks
I'm assuming you mean screen protectors? The original one that came with the phone is great... just try not to get dust underneath it. Makes it unsalvagable
As for other screen protectors... well, you get what you pay for. I bought a pack of 12 for about $15. A $1 screen protector is exactly that.
In terms....
If you're talking about the today screen then yes. Download the .Cab files on your device and open it on your device. Try that for now and if it say like exe. then more then likely you would have to active sync your comp to phone. good luck
I meant screen protector
the one that came with the phone is smaller then the screen.
Very annoying.
Yeag ut do
Try it but dont buy it... your phone will more then likely dent and scratch but it happens over the years. by the time your know it; youll be buying a new phone anyway. Im on my 4 xda over 2 years. IF your with t mobile; they will go into a big change really soon. phone is already in transaction to catch the 3G internet. Save that $15 to your nexts phone! by the time your know it 6 months later you have $45. good luck
I use Boxwave screen protectors with this device and all my past devices. I have good luck with Boxwave. One screen protector will last you 9 months to a year. I normally just carry my Wing (and my previous devices) in my front pocket with the screen turned inwards to my leg. No keys, pens, change or other things in the pocket. Never have had a problem this way.
I use ShieldZone's full case cover(film) on my wing...
even though the place I work doesn't sell them, I still take my keys to the case just to prove the point that cases/protectors are worth it..
I keep my Wing in my pocket, frequently with my money clip and/or pens... 2 months it's still in *great* condition.. sure the cover is getting a bit dirty, but I know when i remove the cover months down the road to replace it it'll probably look like new again
I just ordered a set of protectors from NuShield. They seem like a really great product. I'll let you know how they are when they get here. It was 3 for $11.99 US.
Im into selling phones and one thing I've noticed is that WM phones don't depreciate as much as say a Razr would. I read a comment about someone who says you shouldn't get one (and I respect everyone's opinion,) but that wouldn't be very smart. If you keep your phone in good condition + keep a screen protector on it by the time you come to sell it and buy a new phone you will be able to put more money on your new purchase (with the money made from selling your old phone) than you would with just the 15 you would save from buying a screen protector. For me this is a no brainer. Get a screen protector, and I don't mean the one that comes with it, buy a good one for like 20$.
Atleast once you do you won't care about touching her delicate parts cuz you'll be using protection
I just got my NuShield screen protectors in today and I think they rock. They're of a very strong plastic material that is absolutely clear, and it completely covers the screen, even under the bezel, without using any adhesive. No bubbles, nothing between the protector and the screen, absolutely perfect display. Cannot even tell it is there.
I read a post in another thread where someone bought a sizable skin from bestskinsever.com. I tried it out because they said they had such good luck with it. Its the first screen protector that I have ever put on that actually is invisible. No dust, no bubbles, looks perfect. You use a soap solution before you put it on and slide it into place. I used my fingernail to get the edges of the screen protector underneath the edges of the phone. Seriously, it looks like its not even there. Oh yeah, they are cheap as hell too.
i buyed a schreen protector , exactly to herald .. it cost $22 (it was only one schreen protector) .. i have it about 15 months of full gaming by stylus, and surving net by picsel brovser (a lot of slides by stylus) and i dont have 1 scratch on it... it is realy perfect .. perfect fits on my schreen, and it seems, it is undestroyable... very happy with it ...
i would say, you better buy one more expensive for a long of time than be still buing that, where one cost $1.. (my opinion)
Hi All, since a lot of us are getting the shift now, i guess it's time to think about which screen protector you are going to use, personally i always enjoy the Martin Field Overlay Screen protector, but they don't seems to have one for the shift yet, what do you guys think? found any good screen protector you are going to use?
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
jarbi said:
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
Click to expand...
Click to collapse
yes, i am aware of that, it just i have been using HTC for more then 7 years now, past experience told me i better wait for better screen protector, because once you put it the HTC one, it's so difficult to remove it, and if you do try to remove it and swap it with something else, you leave a mark on the screen, some user even experience bend and uneven screen because the original one is just so sticky.
There don't seem to be many screen protectors specifically for the Shift yet, I'm sure there will be soon. I fitted the included one but not very well, I managed to get a couple of dust specks under it.
I've ordered some generic 7" protectors from Durasec http://www.durasec.com/catalog/index.php?language=en
I also ordered one of their liquid nanotech screen protector kits, don't know much about it but it appears to be a liquid which you spray onto the screen to form a seal. Should be interesting...
Is it neccessary?
Hi,
please, give me an answer to a stupid question?
Is it really necessary to apply a screen protector. Why don't the manufacturers do it in the first place.
What are the advantages, what the disadvantages. Okay, protection comes to mind as an advantage, but shouldn't the original screen be resilient enough?
I'd really like to here some informative opinions.
I have been using a HTC Vario II for some time now without any protection and I can't detect any scratches.
Settembrini
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
firedup said:
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
Click to expand...
Click to collapse
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Pantaloonie said:
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
Click to expand...
Click to collapse
mmm. sounds interesting!
I've got the original on but I have a scratch on the screen and wanted to remove it to see if its just the screen protector or the actual screen that is scratched. Have tried in vain to get at it to peel it off...
Just managed to get a corner - it came off no problem and thankfully the scratch isnt there! Just need a new protector now, my OCD is starting to kick in. Let me know how you get on with the Duratecs! Cheers
wu5262 said:
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Click to expand...
Click to collapse
sounds posh! I'll check it out, thanks
Screen Protector Ultraclear and a Anti Glare
http://shop.brando.com.hk/search.php?keyword=HTC+Shift&Submit=Product+Search
I have had this for my Athena and Brando also have two versions for the Shift.
Computersylvia
DO NOT by the Durasec. Got mine from Germany, welcome to bubble hell.
Just wish I knew where the original ones are from....
Anyone found any decent ones?
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Pantaloonie said:
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Click to expand...
Click to collapse
I'd leave it on if I were you - I only took mine off as it had a hair underneath and I was losing sleep over it. Took a while but once you get a hold of a little corner it lifts off no problem. I've emailed HTC to ask if they can send me another but I'm notn holding my breath.
Would stay away from the standard Duratec - waste of £8. Let me know if you try the liquid one though!
Hi -
Anyone used the liquid Duratec shield on the Shift yet?
Cheers - Dave
Duratec Crap
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Settembrini said:
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Click to expand...
Click to collapse
How did you remove the original screen protector without damaging the display? What is the problem with the Duratec screens?
Hi,
removal was difficult, but I did it. I don't know the exact English words. I used this sticky tape which you wrap up parcels with, tape is of a brownish colour. That I stuck onto the screen protector until it lifted in one corner.
Duratec is thin and cheap material and I guess it is not possible to get it on the screen without lots of bubbles.
Now I have ordered a protector from Brando, was that the name?
We will see.
S.
I really like the anti glare screen protector from www.pocketpctechs.com . I use it with my both my SMT5800 cellphone and my Motion Tablet PC. I'm hoping I can get one sized for the Shift. But my Shift is not here yet so I don't know the size. I can't even tell I have a screen protector with this brand.
screen protector abuse
Hi,
any news about the "best" protector.
In the meantime I have abused 4 or 5. Duratec's cheap ones aren't of any other use than to clean the screen from dust particles.
I tried the Brando "ultra clear" was that the name? Relativ easy to apply, but in the end I fiddled with it too long. Had to peel it off.
Next I tried Brando "plus". Easily to apply, but foil slipped underneath the edge of the screen, when lifting it up to clean off a piece of fluff the protectors edge was damaged.
But the last one is really easy to apply. But, but, they or the distributers just declared them to be for the Shift, originally they are for the eee, how many eeeees were there?
So the screen protector doesn't really fit. At the edges there the foil doesn't cover about 1 or 2 millimeters of the Shift's screen.
Maybe somtime soon they will sell a protector that is for the Shift.
Please, if anyone has got the ultimate protector mention it here:
perfect fit and easily to apply would be nice features.
S.
Hey guys, please vote here - who use screen protector with own TP2
And those who use, please describe here who is the manufacturer of your screen protector and your experience, how good is it for you.
Most recent HTC devices have come with pretty good screen protectors included in the box. I didn't use a screen protector on my first device, and I'm not making that mistake again.
anyone knows why they don't install it from the factory?
I voted and i own an x1. I use.
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
ohyeahar said:
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
Click to expand...
Click to collapse
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
test157 said:
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
Click to expand...
Click to collapse
That's true, but when you use your device for some months without any protector, it will never be so clear as with a screenprotector (that you can replace when needed )
Ranney
Based on what I read in the accessories forum, I decided to try a Martin Fields one. Had it on for 2 days now - so far, so good. The one that came with the phone kept peeling off at the bottom edge near the buttons.
I didn't bother with my Vario III, as the ones I tried seriously affected the screen responsivness. Of course it got a key scratch in the first 3 months:-(
On my TP2 I installed the supplied one, and will get a Martin Fields one.
However I've got to return the unit (dodgy radio), so it is vital not to scratch it before returning it!
I messed upp my original screen protector
So i bought the Copter screenprotector from Skalshop.se it's a bit rubbery, but other than that it works good. It came with some liquid spray for aplying the protection. A bit tricky to apply but worked good in the end.
Martin Fields - where from you guys are buying them? I don't see them at ebay for TP2
also - are they really the BEST? or they just have the highest price?
The store from which I bought my TP2 gave me another screen protector - I haven't used the one that came with the device. Probably cost them less than US$1-2 to buy in bulk - I never pay more than US$8 for one retail
Using the one supplied with the evice and it works perfetly (I was against screen protetors when I had a Hermes, but with TP I can barely see it)
I once had a device and when I applied the screen protector I hated it. It improved sunlight visibility by refracting the light, unfortunately this made it harder to read fine print on the screen. I also couldn't remove the protector and was stuck with it. Another one I had tried before that one which was removable, reduced sensitivity too much.
Those are reasons not use one. But as long as the available protectors can be removed in case you don't like them, then it's worth trying them out. That way you don't risk your screen unecessarily.
SEQ said:
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
Click to expand...
Click to collapse
That's right! I use it and it's better than the one that HTC gives us: I have a new one because it was removed while in my pocket.. But now I'm happier!
I´m using touchscreen phones for many years (since my first PALM ) and i´ve noticed that the new screens are much more resistent. I think that you loose quality if you use a screen protector.
Just don´t put your phone in the same pocket that coins, keys,... and use it´s cover when putting it in a bag.
one other advantage with a phone like this should you choose not to use a screen protector is that since the phone has such a large screen and it's so touch optimized you won't get as much wear and tear on the common points of contact (like the "e" on the onscreen keyboard).
I use Proporta Screen Protectors. After I had used then in my Asus P535 I do not want another brand. They protect very well the screen, they were washable and also doesn't change too much the sensation of the touch with the pen or even with fingers.
I dont use one for a few reasons. I dont put my TP2 in any pocket with coins etc. I am pretty careful with it.
Although most importantly im insured on it, accidental damage w/ no excess to when the time comes it gets a bit dodgy ill smash it up and get a new one. If ive still got the TP2 when my contract runs out/upgrade ill probably wap a screen protector on then.
During a mtb-trip the TP2 accidently fell out of my back pocket and got heavily scratched on the chrome shell just outside of the LCD screen. (thank god the screen got protected by the screen protector)
Would it be possible to replace this Chrome Shell and if so where to buy it?
thx
That chrome shell is apparently called a bezel (didn't know that - am not a native speaker) and that made searching quite a bit easier.
Ebay did the trick:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170367765984
The chrome benzel is plastic painted or metal?
Black Phoenix said:
The chrome benzel is plastic painted or metal?
Click to expand...
Click to collapse
Chromed plastic
can we install this chrome bezle on the tmobiel version?
I doubt you can put it on the t-mobile version. Their version seems to be more square at the edges. But this is cool for the rest of the versions, I could put this on my sprint one when I get it.
This is only the front side right?
I'm kind of looking for a back cover. I've found one at cnn.cn but it contained both for the price of $90 approx.
Random question I hope I got this in the right thread
Has anyone ever bought a new shell for there whole phone and assembeled it themselves?
As i saw this on ebay:
http://cgi.ebay.co.uk/for-HTC-Touch...s_JN?hash=item45ed6fbded&_trksid=p3286.c0.m14
I thought it looked kind of cool and a good way to personalise your phone but i have no idea how hard this would be, any ideas?
Thanks
Rather than get a new one for 30 sumthing bucks, why don't you remove it, sand it and then have it painted black or even chrome?
It'll cost you a lot lesser. A black unbranded HTC TP2 should look awesome. The one from Verizon looks killer.
Have you ever done this? What sort of paint would you use? I don't think this would work as well as you think it would...
Boldra said:
Have you ever done this? What sort of paint would you use? I don't think this would work as well as you think it would...
Click to expand...
Click to collapse
I'm sure modeling paint would work fine.
biscuits1978 said:
I'm sure modeling paint would work fine.
Click to expand...
Click to collapse
I'm not. I would suspect vinyl dye is what you want.
All those "OEM" replacement housings and such are crap.
They never fit like the original.
Think twice before trying to replace something like that, there are alot of little pieces and flat cables.
I`ve been modding playstations and such for years so i`m experienced to say the least but I wouldnt risk my tp2 for it.
ive tried this with my old phone...
it does not work well.. i tried with different kinds of paint, primer, sealer, clear coated afterwards... it doesnt work
the plastic housing we have and can get are dyed into the plastic.. its not painted or coated..
the minute you put it in your pocket or it hits your keys or something.. it will chip off...
i have the tmobile version....i thought i had got permanent marker on the gold part of the phone, but do any of u know if it is black paint under the gold?
i was thinking of getting a battery cover and spraying it black. Would it work?
i have painted alot of mobiles luckly for me my m8s dad owns a car paint factory i spreyed one chrome and used 2pac laqueer on the top ot was minted i may chrome my whole tp2 i am gonna w8 till warrenty runs out
anyone has experience with assemling/disassembling this chrome shell..?
i've got a big scratch/dent and i would like too buy a new one but it seems like it's pretty too get it off.. let alone getting the new one on, in one piece
Tilt 2 chrome bezel
Anyone know of a source for the chrome bezel on my AT&T Tilt 2?
Ron
Calif
I want to install the AT&T's Chrome frame on my Sprint phone and was just wandering if I buy the bezel does it include the power button? and if not does anyone know where I can get it?
I just ordered my holster from seidio and all I need is a full body invisible transparent shield for Tilt. I'm having a difficult time trying to determine which brand is a better choices(Bodyguardz, zagg, phantom skinz). So far, I'm leaning toward Bodyguardz full body shield because it seems to protect the chrome corner side part and heard good reviews on surface texture feel.
Any inputs before I order the bodyguardz? Money is not easy to come by for me so I want to make sure before I plunk down hard earned cash. =)
Thanks in advance.
I bought one of them, think it was the bodyguard or flex version. I cant tell you how they hold up though because I ended up destroying mine while trying to put them on. Talk about a pain in the ass.
It was difficult to place them in the right spots and keep out the air bubbles, even using a credit card to squeegee the air out didnt work out to well. Then some how pieces of the larger ones were sticking to themselves while I was trying to put them on. They arent like the simple screen protectors that come with the phone and are very easy to put on.
They need an instructional video for people like me. Id really love to use the full protectors after shelling out the money I did for my Tilt 2, but I wont waste my money on something thats im likely to ruin before I even get on.
Bodyguardz
Bodyguardz is great, feel and protection wise. It is a little difficult to put on but once on correctly it will be worth it. If you use a little water (actually it comes with applicator spray) it will make it easier to position while applying. I used a Best Skins Ever on my Fuze and it was a little sticky while sliding with the finger but this one is almost like the stock protector, but thicker, longer lasting. If you do a search here a xda there is a thread where someone did a very good job showing and explaining how to put it on. GREAT Of course I have Tmous TP2 but I don't think they are that much different.
I finally took the plunge and ordered bodyguardz for my tilt 2. I'll post pictures and post it here. I hope I'll do a good job installing it. I hope the shield will protect the chrome edge part of the tilt2.
have you guys ever heard of GHOSTARMOR. very similar product. these guys show videos of their product actually being scratched and tossed around. They say its made out of the same material they use on military applications. this stuff looks extremely durable from their videos.
http://www.ghost-armor.com
I wonder if bodygaurdz is made out of the same material that GHOSTARMOR uses. Ive been really leaning towards getting GHOSTARMOR for my Sprint TP2.
I have the AT&T Tilt 2 and I love the screen shield that came in the box...does anyone know where to get more?
There was no water needed. Simply apply the shield and VOWLA* (<-check spelling) it fit perfect...
pimp4cheddar said:
I have the AT&T Tilt 2 and I love the screen shield that came in the box...does anyone know where to get more?
There was no water needed. Simply apply the shield and VOWLA* (<-check spelling) it fit perfect...
Click to expand...
Click to collapse
i do like the att screen shield - it is very smooth and feels nice. i bought a 3pack for $10 at the local att store when i picked up my new tilt2. had to ask to find them. i have 3 tiny specks of something on the current one (not bothersome so much), because once you peel the back it attracts everything to them. ive got the second one on and have 1 more before i realized that it had one i the box lol. i just got my 2 pack of body guardz but havent had the time to put it on. must devote my full attention to the process! there are great youtube videos for application tips and also great thread on this somewhere. i am very a very detail oriented person and a flawed application will drive me nuts. anywho i have 2 to try for $20 (i used a 20%) off coupon. will let you know how it goes. i chose bodyguardz cuz everyone said they are very smooth and durable and you get 2 instead of one....
att stock screen guards/got new bodyguardz
this was a dup sorry
jlstauff said:
i do like the att screen shield - it is very smooth and feels nice. i bought a 3pack for $10 at the local att store when i picked up my new tilt2. had to ask to find them. i have 3 tiny specks of something on the current one (not bothersome so much), because once you peel the back it attracts everything to them. ive got the second one on and have 1 more before i realized that it had one i the box lol. i just got my 2 pack of body guardz but havent had the time to put it on. must devote my full attention to the process! there are great youtube videos for application tips and also great thread on this somewhere. i am very a very detail oriented person and a flawed application will drive me nuts. anywho i have 2 to try for $20 (i used a 20%) off coupon. will let you know how it goes. i chose bodyguardz cuz everyone said they are very smooth and durable and you get 2 instead of one....
Click to expand...
Click to collapse
I see...
I was actually looking for a screen protector online and in stores and stumbled into the one that AT&T put into the box with the phone. I was soooo excited!
Anyway...I don't know if I can spend $20 on 2 from bodyguardz...it's way too much money. However...you do get a lifetime replacement on them...so it might not be that bad.
Let me know how they come out and if you like them...I'm curious to see how they fit the Tilt 2.
Did you get just the screen protector of the case/phone protectors? They also sell the plastic peices for the back and sides...???
Snap some pics when your done with the application!
Thanks,
so the one that att has out of the box.. does it require cutting? or is it an exact fit?
ProjektFuze said:
so the one that att has out of the box.. does it require cutting? or is it an exact fit?
Click to expand...
Click to collapse
It should be an exact fit
lol yea.. i actually just got mine today.. so yea found out myself... and i put it on perfectly!! seems like a very legit screen protector... very rearely do i use the screen protectors that come out of the box.. this one is actually well made and durable
id love to see pictures of this. Thanks. I ordered the only case ATT had which is a clear plastic one.
I much rather use this and a leather case so i dont scratch it with the case itself.
Bodyguardz
I bought a pair of Bodyguardz because I was very happy with them on my Raphael. They survived a crash (on the moped) which my denim jeans didn't. I also tried Best skinz ever, but they peel off far to easily. I won't be buying that anymore. Anyway, the BGZ armor has been protecting my phone for almost or over a month now. Still happy with it. I'm not so pleased with the fitting though. The ones for Raphel fit absolutely perfect. the one for Rhodium not so... I have to say I could have done a better job with the pieces on the (front)sides of the phone. But that's easy to say in hindsight. It wasn't very clear how they would fit before application. Now I know better. the screenprotector is the worst part (the way its cut out). However many people complain about the screenprotectors from BSE/BGZ/GA because of the rubber-y-ness and go for the stock one (I f-ed up my stock screenprotector so had no choice, btw I've gotten used to it). Still I would recommend BGZ. BGZ has proven itself to me several times. A crash and several drops on the floor. No damage, no scratch and doesn't peel off that easily.