Related
I didn't want to hijack, this thread wth my problems
http://forum.xda-developers.com/showthread.php?t=294113
I know that the less technical members like myself should just wait until you guys sort develope things,,
But, I am very keen
Anyway, I hope I am not thie only person having problems, any advice would be very much appeciated
This is what I have done,
Copied VRdriver.dll to the windows directory
Unloaded com6
Unloaded Ril
Import Serial and VR Serial reg entries using taskmgr
Run Trusted.cab file
I do a soft reset
Com6 starts automatically, now showing VRDriver.dll (all ok up to this point)
Try to start RIL - error message - Device Load Error The operation completed sucessfully.
I have even tried a hard reset and starting from scratch, but I just can't get RIL to start.
As per the other thread I have changed the order of RIL from 3 to 4 and this is saved in the registry, but it just won't start.
Any ideas.. would appreciate help not complaints..
Thanks Guys
134 views and no advice, come on guys..... help me out here
tbern123 said:
I didn't want to hijack, this thread wth my problems
http://forum.xda-developers.com/showthread.php?t=294113
I know that the less technical members like myself should just wait until you guys sort develope things,,
But, I am very keen
Anyway, I hope I am not thie only person having problems, any advice would be very much appeciated
This is what I have done,
Copied VRdriver.dll to the windows directory
Unloaded com6
Unloaded Ril
Import Serial and VR Serial reg entries using taskmgr
Run Trusted.cab file
I do a soft reset
Com6 starts automatically, now showing VRDriver.dll (all ok up to this point)
Try to start RIL - error message - Device Load Error The operation completed sucessfully.
I have even tried a hard reset and starting from scratch, but I just can't get RIL to start.
As per the other thread I have changed the order of RIL from 3 to 4 and this is saved in the registry, but it just won't start.
Any ideas.. would appreciate help not complaints..
Thanks Guys
Click to expand...
Click to collapse
you dont need to soft reset your device... just use task manager to stop COM6 and RIL, copy the dll and import the reg files and start the services again...
tbern123 said:
134 views and no advice, come on guys..... help me out here
Click to expand...
Click to collapse
My advice from a non developer but one who reads the threads:
Wait until the 4 or 5 satellites are actually picking up enough strength to get a fix, which probably wont happen unless you do a hardware mod which isnt even figured out yet.
First, thanks for taking this out of the development thread tbern123. Nicely done
Let me get this straight: When you cold reset, you still don't have a radio and RIL doesn't start?
If this is the case then your problem has nothing to do with the VRSerial driver or the GPS installation.
Sleuth255 said:
First, thanks for taking this out of the development thread tbern123. Nicely done
Let me get this straight: When you cold reset, you still don't have a radio and RIL doesn't start?
If this is the case then your problem has nothing to do with the VRSerial driver or the GPS installation.
Click to expand...
Click to collapse
I can get Com 6 to load now, but still no luck with RIL.... I think I will leave it and just follow the other threads until a solution is found..
Thanks for your help guys
have u checked in registry
HKLM\Drivers\BuiltIn\Serial
"Index"="5"
the index must be 5 as my hermes set to 6 automatically.
I need some guidence!
I have Upgated to follow, but nothing about GPS works, hope someone come point me to the right direction:
Radio: 1.35.00.11
ROM: 1.23.708.4
ExtROM 1.25.751.102
Is there something else I need / missing ??
Many many Thanks !!
Jeffrey
How do I intall the Registry file to Hermes!
How do I intall the Registry file to Hermes!
I really don't know how !
thanks to exp. advice !!
jszeto said:
How do I intall the Registry file to Hermes!
I really don't know how !
thanks to exp. advice !!
Click to expand...
Click to collapse
this is not exp. advice but just to share information :
u can use freeware (1)PHM registry editor
(2)Resco explorer with registry plugin
(3)TRE
(4)taskmgr
(5)total commander (manual entry)
(6) others u can search through net..
Guys,
Finally, the program i missed most since the wm5 in my ATOM is Spb PhoneSuite, is FIX!! WORKING in our ATOM now!!!
I did alteration to the installation file and managed to fix the compatibilities issue!!
**Notes to the Mod here. I did only compatibilities fix to the cab and attach the installation file here. No cr**k or Ser** is provided. Please do inform me if im not allow to post this here, i will remove it ASAP
**Notes to people who download this here. This will install as a trial without serial, if you like it please do buy it
ckaidi said:
Guys,
Finally, the program i missed most since the wm5 in my ATOM is Spb PhoneSuite, is FIX!! WORKING in our ATOM now!!!
I did alteration to the installation file and managed to fix the compatibilities issue!!
**Notes to the Mod here. I did only compatibilities fix to the cab and attach the installation file here. No cr**k or Ser** is provided. Please do inform me if im not allow to post this here, i will remove it ASAP
**Notes to people who download this here. This will install as a trial without serial, if you like it please do buy it
Click to expand...
Click to collapse
i have registration for that...hehehe
is this power hungry?
GREAT CKAIDI, i tried to install this cab in my atom, and its working perfectly now.
so now SPB PHONESUITE is not a problem anymore in WM6 AKU 0.7 by using this cab.
for you guys, the only problem is the registration key;-) 15 days trial only.
dont worry we're here este#4%[email protected] i mean , u can buy the program.
anyway i just want to try and its working. As of now, i prefer to still use HTC plugin. I dont need call filtering also, so maybe i will reinstall this program when i need it.
thank
great job thank you
I miss spb so much
I can not switch between the profiles? is it common problem with this file? or I just have it with my mobile?
Found a bug!!! The service failed to start!! and therefore you cant use the profiling!!
The workaround is to manual start the "spbphonesuite" service everytime you soft reset and everything will work. THis can be done thru sktool or memmaid.
Not a long term solution but rest asured that i will try to solve it soon
Anyone have any ideas how to load/unload dll pls PM me. This may be the way to solve many SIP and software issues.
Thank!!
thanks ckaidi
i found the solution:
Under the registery : HKLM\services\spbhonesuite\
Need to change the key " UnsignedService" from "0" to value "1"
bayatmu said:
thanks ckaidi
i found the solution:
Under the registery : HKLM\services\spbhonesuite\
Need to change the key " UnsignedService" from "0" to value "1"
Click to expand...
Click to collapse
i tried that, does the service auto start after you reboot? doesnt work for me
ckaidi said:
i tried that, does the service auto start after you reboot? doesnt work for me
Click to expand...
Click to collapse
Yes
the services started automaticlly after the reboot
Profiling is working fine
bayatmu said:
Yes
the services started automaticlly after the reboot
Profiling is working fine
Click to expand...
Click to collapse
Hmm...Although i know about this UnsignedService key, but i just hardreset and install phonesuite only but i dont see this key. HOw did you get it to work? can share your step by step so that i can recreate the cab for others to use?
Thank!!
great job ckaidi!!!
This forum is alive!
cheers,
Jiggs
ckaidi said:
Hmm...Although i know about this UnsignedService key, but i just hardreset and install phonesuite only but i dont see this key. HOw did you get it to work? can share your step by step so that i can recreate the cab for others to use?
Thank!!
Click to expand...
Click to collapse
went first to sktools, selectedt Services, select spb phone sutie and run it,
then while you are at services (sktools) just hlight the spb phone suite and keep holding the sytels on it untill the popup window apear, select registry explorer, secroll down up to the last key which is "UnsignedService", edit that key and change it from "0" to "1", reboot the phone, and injoy
Regards
SPB Phone Tools
That is the very good news to have phone suite running in WM6. Many Thanks
ckaidi, what are the modification made to the installation file? does this mean all other problematic software on jiggs's WM6 can be fixed?
just asking. no technical knowledge how cab files are made.
I don't have such key "Unsignedservice", I created it manually, but it didn't help, what should I do?
jiggs said:
great job ckaidi!!!
This forum is alive!
cheers,
Jiggs
Click to expand...
Click to collapse
ckaidi now will help you to solve more problem in upcoming ROM
@bayatmu
bro are you using atom?which model and which ROM pls let us know can?
@aleden
bro i too had this problem, still searching for solution. Do use the sktool or memmaid to activate the service after you soft reset for the time being
@uan
bro i did alteration the to installation "cab" by removing the "pre xml" requirement. This solve the installation issue, however compatibilities are not guarranteed.
@EVERYBODY
Guys, if you all have any ideas how to solve the certificate issue which all cooked WM6 ROMS suffer this problem except for those that can disable certmod.dll, unfortunately, our certmod.dll can't be hacked as mentioned by Jiggs. Please do drop a PM to us. Thank!!!
Got a bug. The wireless icon works doesn't work. You can choose which wireless connection to turn on or off but it doesn't turn them on or off. Any ideas or I'm the only one experiencing this?
@yetdy
yes as mentioned on the earlier post, the service does had bug as it start after reboot, so you got to manually start the service using SKTOOL or MEMMAID, after which all the function will resumed
ckaidi said:
@bayatmu
bro are you using atom?which model and which ROM pls let us know can?
@aleden
bro i too had this problem, still searching for solution. Do use the sktool or memmaid to activate the service after you soft reset for the time being
@uan
bro i did alteration the to installation "cab" by removing the "pre xml" requirement. This solve the installation issue, however compatibilities are not guarranteed.
@EVERYBODY
Guys, if you all have any ideas how to solve the certificate issue which all cooked WM6 ROMS suffer this problem except for those that can disable certmod.dll, unfortunately, our certmod.dll can't be hacked as mentioned by Jiggs. Please do drop a PM to us. Thank!!!
Click to expand...
Click to collapse
I am using Atom Ecec W6 AUK7
as i mentioned before, i just activated the service of Phone suite through sktools then changed the key to value of one
Guys,
Can someone please help me....TX9 i killing me....How can i mak ABC as default method for typing, instead pressing * and hold it....
thanx
I second this request.
Experts, please help.
leveex said:
Guys,
Can someone please help me....TX9 i killing me....How can i mak ABC as default method for typing, instead pressing * and hold it....
thanx
Click to expand...
Click to collapse
Use this cab file to disable TX9. Maybe this can be a quick fix for you guys. Read this post first before installing: http://forum.xda-developers.com/showthread.php?t=351468
There's also another option:http://forum.xda-developers.com/showthread.php?t=354914
dont try the attached cab file.it will only make your input into numbers instead of letters.im still trying to find a way to disable xt9. ive tried tinkering with all sorts of registry values but no luck so far.i really hope someone could come up with a solution...
possible to add other languages to the xt9 dictionary?
I was playing with registry and I found if you change DWORD value you might find something!
Here is the place in registry:
\HKLM\Software\Tegic\eT9\
i noticed that total commander is on alot of roms, knowing that it is for stuff to do with the registry do i really need it installed on my hermes?
Thanks in advance for any answers
it's imho the best filemanager for pocketpc's and pc's too
but if you feel otherwise and if you don't need to access the registry
or wish to use another regeditor then no you don't need it
ok thanks for your reply i think ill take it off as i dont need to access the registry
I dont want a cab or rom or anything like that...
Just someone to locate the FM radio files in his device,save them to his computer...and send them here...It's very simple...u just need a HTC S740 and a PC...nothing else...
If anyone could help I would be realy greatfull.
the files are located in windows folder... it's FMradio.exe...
I'm not asking something so hard...help me please
If you'd write why you want them we'd have a motivation. I don't like helping a stranger without knowing what it's for. You know that, if you deleted them or something, you can do a hard reset (start - all programs - more - accessories - clear storage), and all the programs are there again. By the way, you can't access the Windows Folder with a PC, so it's not something that much easy to ask. HTC doesn't offer quick support in that case, so I feel guilty to help other Rose-owners out and perhaps more than one of you can use the files.
The .zip contains these files:
FMRadio.exe
FMRadio.exe.0407.mui
FMRadio.exe.0409.mui
FMRadio.exe.040C.mui
FMRadio.exe.0410.mui
FMRadio.exe.0415.mui
FMRadio.exe.041F.mui
FMRadio.Ink
I hope I'm doing nothing illegal, delete the post if I do so
€: Dude why did you doublepost that, it's not going any faster, people that are willing to help don't only check one subforum. BTW "I WANT the FM radio files..." dude, you can't dictate us. Also this is not a chat, please write properly next time.
i just love you! let me try them now if u could tell me the exact directory of each file that would be very helpful.
Sorry I didn't mention it earlier...My aim is just to make a radio.cab for the S743 (us version) which has no radio software installed.
I made it work guys.
I have made a new post.
http://forum.xda-developers.com/showthread.php?t=642878