HTC Goldcard/SPL Question - Touch Dual, MDA Touch Plus ROM Development

Is this scenario possible:
(1) Patch SPL
(2) Use JumpSPL to write/execute patched SPL
(3) Flash modified *.nbh via goldcard

Related

help...X01HT [email protected] first splash after upgrad to WM6

My X01HT [email protected] first splash after upgrad to WM6
i had flashed a not completed WM6 file....
Bootloader: 1.40 Olipro....
how can i flash another firmware?
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
mrvanx said:
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
Click to expand...
Click to collapse
Today I got the same problem after flash a custom ROM with incorrect INITFLASHFILES.DAT.
It's not neccesary to flash from SD. Enter into Bootloader mode (tricolor screen), conect to the PC (active sync will not catch the device) and run RUUwrapper selectign 1.40+Is hard SPL to flash another nbh ROM file.
i had already unbirk it....

how to install radio through usb and card.

how to install radio through usb and card? currently bad rom is installed on my hd2
which is stuck on startup.so want install radio.i got a nbh file.so shoud i put file in card and rename leoimg.nbh or volume down boot and via usb?
dont want again brick my hd2
but there is HSPL.
yousufshah said:
how to install radio through usb and card? currently bad rom is installed on my hd2
which is stuck on startup.so want install radio.i got a nbh file.so shoud i put file in card and rename leoimg.nbh or volume down boot and via usb?
dont want again brick my hd2
but there is HSPL.
Click to expand...
Click to collapse
Firstly you have to have HSPL installed.
You can flash it via sd by putting the radio file into the root of sd card but don't forget to rename it leoimg.nbh. Don't flash radio 2.xx.51.xx if you have Tmous. It will brick ur phone.
You can also flashing it via USB but you need RUU (flashing tools).
Either way you have to be able to go into boot loader mode by way of press vol down and power on buttons at the same time.
Cheers

Mondrian Radios & Mini OSPL Downgrade Tutorial

Mondrian Radios​
requirement
XSPL
instructions
download one of the attached RUUs.
extract the contents of *.zip
download Radio of choice
extract the contents of *.7z
copy RADIO_Unsigned.nbh into the same folder as the RUU
bring your Mondrian into Bootloader (Tri-Color Screen)
connect your Mondrian via USB to your computer
execute ROMUpdateUtility.exe
follow on-screen instructions
radios
Radio 5.51.09.06_22.30.50 from Mondrian Cingular 1.03.502.07
--- download
------ here
Radio 5.66.09.09_22.46.50 from Mondrian Cingular 1.52.502.04
--- download
------ here
Radio 5.69.09.05a_22.50.50 from Mondrian Cingular 4.03.502.00
--- download
------ here
*.7z contents
nb (folder)
--- spl.nb
------ radio.nb
stock (folder)
--- SPL_Signed.nbh
------ contains radio.nb and spl.nb
xml (folder)
--- nbh.xml
------ describes the contents of SPL_Signed.nbh
RUU_Unsigned.nbh
--- contains radio.nb only
Mini Downgrade OSPL Tutorial​
download either of the two RUUs
extract the contents of *.zip
download either of the Mondrian Cingular 1.xx Radios
extract the contents of *.7z
copy SPL_Signed.nbh from stock folder to same folder as RUU
bring your Mondrian into Bootloader (Tri-Color Screen)
connect your Mondrian via USB to your computer
execute ROMUpdateUtility.exe
follow on-screen instructions
Why do we do this?
I have Radio 5.69.09.05a_22.50.50 and bootloader 4.3.2250
I want to flash RSPL and then DFT ROM, but as I see I need to downgrade bootloader
If I flash Radio 5.66.09.09_22.46.50 from Mondrian Cingular 1.52.502.04 file on my device , will it brick it? can I flash 5.66 radio over 5.69? to downgrade bootloader?
oguz25 said:
Why do we do this?
Click to expand...
Click to collapse
Radio controls one's device's connectivity strength & quality... i.e. cellular signal & strength, etc.
Downgrade OSPL so that one could XSPL.
DJSave said:
I have Radio 5.69.09.05a_22.50.50 and bootloader 4.3.2250
I want to flash RSPL and then DFT ROM, but as I see I need to downgrade bootloader
If I flash Radio 5.66.09.09_22.46.50 from Mondrian Cingular 1.52.502.04 file on my device , will it brick it? can I flash 5.66 radio over 5.69? to downgrade bootloader?
Click to expand...
Click to collapse
only Mondrian Cingular Shipped ROMs have been leaked...
attempting to flash won't brick your device unless something goes horribly wrong.
flash might fail because of an invalid vendor id, though, if one's device isn't Cingular branded.
Does anyone have a Telus radio?
DJSave said:
I have Radio 5.69.09.05a_22.50.50 and bootloader 4.3.2250
I want to flash RSPL and then DFT ROM, but as I see I need to downgrade bootloader
If I flash Radio 5.66.09.09_22.46.50 from Mondrian Cingular 1.52.502.04 file on my device , will it brick it? can I flash 5.66 radio over 5.69? to downgrade bootloader?
Click to expand...
Click to collapse
You would be better off finding an original rom with the lower radios and going that route. At least that's what I did going from 4.3 to DFT. Found the original 7004 signed retail rom flashed that then did the RSPL->HSPL->DFT rom
V4 is amazing for the surround btw
Using this RUU http://forum.xda-developers.com/showthread.php?t=860842
can i use same above tutorial to downgrade ?
Im at 7390 or 7392 something atm
And im guessing above link is 7004 right ?
sh4d0w86 said:
Mondrian Radios​
requirement
XSPL
instructions
download one of the attached RUUs.
extract the contents of *.zip
download Radio of choice
extract the contents of *.7z
copy RADIO_Unsigned.nbh into the same folder as the RUU
bring your Mondrian into Bootloader (Tri-Color Screen)
connect your Mondrian via USB to your computer
execute ROMUpdateUtility.exe
follow on-screen instructions
radios
Radio 5.51.09.06_22.30.50 from Mondrian Cingular 1.03.502.07
--- download
------ here
Radio 5.66.09.09_22.46.50 from Mondrian Cingular 1.52.502.04
--- download
------ here
Radio 5.69.09.05a_22.50.50 from Mondrian Cingular 4.03.502.00
--- download
------ here
*.7z contents
nb (folder)
--- spl.nb
------ radio.nb
stock (folder)
--- SPL_Signed.nbh
------ contains radio.nb and spl.nb
xml (folder)
--- nbh.xml
------ describes the contents of SPL_Signed.nbh
RUU_Unsigned.nbh
--- contains radio.nb only
Click to expand...
Click to collapse
I have downgraded using Radio 5.66.09.09_22.46.50 from Mondrian Cingular 1.52.502.04
and unlock my device using coutla hspl.and flashed dft rom.
now can I use Radio 5.69.09.05a_22.50.50 from Mondrian Cingular 4.03.502.00
Kindly Help
mcsc said:
Does anyone have a Telus radio?
Click to expand...
Click to collapse
I have one but Its half bricked... still looking to fix that.

Flash SPL Goldcard and get "Not Allowed"

What do i have to do to finally downgrade my spl to install custom rom?

Can't flash any any rom

i don't know if i can save my x7500, i can only get the bootloader screen my spl is 3.05 the device is also cid locked so i can't flash any custom rom, what are your suggestions? any of u heard about goldCard? can any flash a rom with spl 3.05? what were you do if u have the same situation?
Thanks...

Categories

Resources