Related
After I OTA'd the phone, I wanted to do something in QPST, so I hooked up the phone in diag mode (Debugging active and Dial Up Networking). The phone connected in diagnostic mode, but connected to a different port than before I had OTA'd it, and QPST wouldn't connect or recognize it anymore. Oddly, CDMA Workshop would connect, but still wouldn't read it.
Seeing as how the port it connected to was com port 8, I changed it to a lower port number (port number 2), because I had heard CDMA Workshop sometimes has issues with anything above port 6. Still no luck.
The weird thing is that the port I was using it on before I OTA'd (port 3) claimed it was still in use. In a last ditch attempt to get it working, I connected to port 3 anyway, and still had no luck.
Anyone have any ideas?
Please I need a solution.
Was the phone in dialup mode? Did you usbui to modem?
Sent from my DROIDX using Tapatalk
hondakorn said:
Was the phone in dialup mode? Did you usbui to modem?
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Yep and yep.cdma workshop keeps saying failed.. Cannot read phone. Or some thing like that
Yep same here. I did a *22899 to try to remedy something else & now qpst won't see the phone. I uninstalled & reinstalled both qpst & the phone drivers & so far it's a no-go. Any ideas?
Sent from my SCH-I500 using XDA App
Whats the dif? between *228 and 22899? Im still not finding the answer to the problem, Ive even tried changing the cable.
dandog96 said:
Whats the dif? between *228 and 22899? Im still not finding the answer to the problem, Ive even tried changing the cable.
Click to expand...
Click to collapse
I was once told that *22899 was the same as *228, option 1 which reprograms the phone radio settings but when I did it yesterday it said it was in activation mode & the lock p/w was set. I rebooted & reran 228, option 1 cause I thought I had hosed it up & thats where my qpst trouble began.
Sent from my SCH-I500 using XDA App
garywojdan81 said:
I was once told that *22899 was the same as *228, option 1 which reprograms the phone radio settings but when I did it yesterday it said it was in activation mode & the lock p/w was set. I rebooted & reran 228, option 1 cause I thought I had hosed it up & thats where my qpst trouble began.
Click to expand...
Click to collapse
My prob. is when I plug it in to qpst it finds the com port but on the com port its says no phone.
Now I realized that its not limited to qpst, when I try to One-Click root it says Error Device Not Connected, Even when im on debug mode. So it seems to be a general usb prob. : /. This needs to be fixed.
This could have something with the ota causing mass storage to show up as a cdrom. Borked usb drivers in the ota it seems.
The only thing is I didn't update from the ota, I used Adrynalyne's modem, rom & kernel which he deodexed, debloated & rooted. Because of his work, I never had the cdrom problem & still don't; I can mount it as usb mass storage just like on di01. It's just that qpst won't see it, but everything else does.
update: Problem solved. Blade765 in the dev forum suggested booting the phone up while connected by usb with qpst open & it worked. As soon as it booted fully, qpst saw it & I was in. Oddly enough, the only value that was reset to the [email protected] and disabled was the #1 setting. The #0 setting was still enabled and still set to @vzw (no dun). Hope this helps...
Sent from my SCH-I500 using XDA App & 3g hotspot
garywojdan81 said:
The only thing is I didn't update from the ota, I used Adrynalyne's modem, rom & kernel which he deodexed, debloated & rooted. Because of his work, I never had the cdrom problem & still don't; I can mount it as usb mass storage just like on di01. It's just that qpst won't see it, but everything else does.
update: Problem solved. Blade765 in the dev forum suggested booting the phone up while connected by usb with qpst open & it worked. As soon as it booted fully, qpst saw it & I was in. Oddly enough, the only value that was reset to the [email protected] and disabled was the #1 setting. The #0 setting was still enabled and still set to @vzw (no dun). Hope this helps...
Sent from my SCH-I500 using XDA App & 3g hotspot
Click to expand...
Click to collapse
Great to know your fixed. Ill try this after work. Can you please explain to me what is a dun file, as I am a newbie.
.dun is stands for dial up networking and it is the value that directs your connection to the billing pipeline. So the goal is to change the first two entries in the service programming mode from "[email protected]" to "[email protected]" in order to keep your connection in the unlimited smartphone data pipeline which you're already paying for.
Sent from my SCH-I500 using XDA App
Well. Unfortunately it seems we have dif. problems because that solution does not work : (.
Can you try a different cable? Many othe micro usb cables are compatible.
Sent from my SCH-I500 using XDA App
Yea, Qpst worked before. Its just at one point it just stopped connecting. Ive tried three cables, same problem. Ive tried running qpst, and restarting the phone with the usb in, still doesnt help. I just dont understand. Same with the one-click root software. It worked before, but now it wont let me root, as it says my device is not connected.
Solution for this issue. Running out of options.
I have a Verizon fascinate,
hardware version i500.04,
firmware 2.1 update1,
build sch-i500.di01 ( i tried this with dl09 as well ).
When I check the box to see unknown qpst will see the ports but it will not see a phone on it. I have also searched a variety of different forums and have found other people with this issue but no resolutions other then to start with usb connected. Diagnostic mode is enabled and so is usb debugging. I have tried a variety of different combinations of settings with no luck.
Is there another solution for this issue other then booting with qpst and usb cable. Currently I have tried qpst with the following.
1: installing Samsung_Mobile_USB_Driver_V1.3.550.0_SCH-i500_Fascinate and rebooting.
2: installing SAMSUNG_USB_Driver_for_Mobile_Phones_x86.msi and rebooting
3: removing com ports and modem and reinstalling in every way i know how to.
4: used odin to flash back to dl01
5: Taken this to a fresh computer and installed only the fascinate drivers and qpst with no luck.
Any help would be greatly appreciated.
doctorslack said:
I have a Verizon fascinate,
hardware version i500.04,
firmware 2.1 update1,
build sch-i500.di01 ( i tried this with dl09 as well ).
When I check the box to see unknown qpst will see the ports but it will not see a phone on it. I have also searched a variety of different forums and have found other people with this issue but no resolutions other then to start with usb connected. Diagnostic mode is enabled and so is usb debugging. I have tried a variety of different combinations of settings with no luck.
Is there another solution for this issue other then booting with qpst and usb cable. Currently I have tried qpst with the following.
1: installing Samsung_Mobile_USB_Driver_V1.3.550.0_SCH-i500_Fascinate and rebooting.
2: installing SAMSUNG_USB_Driver_for_Mobile_Phones_x86.msi and rebooting
3: removing com ports and modem and reinstalling in every way i know how to.
4: used odin to flash back to dl01
5: Taken this to a fresh computer and installed only the fascinate drivers and qpst with no luck.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Does rebooting the phone with QPST on help? It doesn't for me. Im on the verge of giving up.
I know this may sound stupid but do you have debugging on and dial up networking checked? Sorry if this is painfully obvious but I've found that most most of my troubles have come from details that I might've missed. Also, the reboot with the usb connected & qpst on is what did the trick for me.
Sent from my SCH-I500 using XDA App
garywojdan81 said:
I know this may sound stupid but do you have debugging on and dial up networking checked? Sorry if this is painfully obvious but I've found that most most of my troubles have come from details that I might've missed. Also, the reboot with the usb connected & qpst on is what did the trick for me.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Are you saying to disable those or make sure their enabled. I'm looking into performing the steps to get the work around for free mobile hotspots myself. Still doing a lot of reading as I'm new to Modding my phone but have learned a lot in the few days I've been teaching myself and was amazed at how easy a lot of this is especially with great guides on these forums and others.
Sent from my SCH-I500 using XDA App
Hello all,
Lumia 710, Firmware - 1600.3007.7740.11465
Dev Info: RM809, PC: 059L3R1
EDIT: So first question I guess is if any of the above can be an issue?
So I got my hands on this demo unit, I was able to remove the demo firmware and load the full thing. Phone works well, though I have no microsim to fully test it out. I wanted to update the 710 but I'm having issues. I check via the Zune software but have several issues:
If 710 wifi is on and internet on comp is working:
1) Connect phone to zune,
2) Sync options load.
3) Manually check for update.
4) Wait about 2 minutes.
5) Phone is up to date, so no available updates.
This seems wrong as most if not all have the Tango update, so I search and find the update trick. I try to follow the guide but it goes as follows:
1) Lumia device has wifi turned off (no cell data as ni micro-sim) OR in airplane mode.
2) Load Zune software.
3) Connect device.
4) Receive error about "Can not make a connection from your phone to the internet". I initially assumed this was expected and just clicked ok.
5) Manually try for update in the settings
6) Wait 2 minutes.
7) Get another error; "Can not connect to update service at this time".
EDIT: As a note, the update check lasts about 2 minutes either way, and if I even leave the net connected, when I plug the device in in airplane mode it will still say it can't connect to the update service, thats why I'm asking about the initial error of "can't create an internet connection to your phone"...
I then searched for solutions to THAT error, and have since, enabled mobile services, removed and refreshed cirtificates, and restarted an event service. Then re-installed the Zune software, all to no avail. That is, on reconnection, I still get that Connection Error.
So main points have been made, next thing to note is I am not using the original USB as I don't have one. I have tried however several others. Standard USB, HTC (older), other data-capable USB. All same result. Is this possibly the only reason, or is it something from above?
Are there files or more information I can post to get some more help? I would really like to get this working. So any and all useful advice is welcome.
Also, didn't see a 710 specific forum, and many posts on it here, so I posted this question here. If it's the wrong place, mods please move or let me know.
Start Zune
Turn off Data connection and Wifi on the Phone
Connect the Phone with the PC (USB)
Start the update search in Zune
About 3 seconds later, disconnect your PC from the internet (Turn WLAN off).
Zune finds Mango-Update. Press OK.
Connect to the internet again and install the update.
There you have it, this quick and easy trick will work if (and only if ) your carrier has already began rolling out the update.
OR
http://www.peterskitchen.net/?p=8381
Ahoy, Thanks for the quick reply. However, this is not my major question, I've found the trick several times. What I want to know is if that weird error message I get has anything to do with the process. No matter what I always get the error, and subsequently I get the "cannot connect to update service" error. All is as I said in my first post....
The device has 809 written behind the battery. But I will try to load 803 firmware if that may be the issue, thoughts?
Edit: So I'm thinking the problem is with the Zune software. Despite a complete removal and reinstall I still get that connection error message. It seems if the device has no data connection, Zune wont connect (or can't) to the net to check for any kind of updat. The subsequent "we can't connect to the server" error message is consistant and happens with another wp I try while it's also has its data connections off. This is what I wanted to ask if its common, or if there is something seriously wrong with my install. It won't find updates at all if the phone's data connections are off. Any advice on this?
Hi friends..
I bought SGSIII yesterday and started to exploring it's options since then.. As it's my first Android I am using some time to getting use to it..
Now here comes my two problems.
1. I am using a wifi router at my house and at first try I was able to connect to it easily.., but since then I am not able to connect again to the same connection. It finds it, tried to connect but then shows saved and then start searching again and couldn't connect it again. I tried factory settings once and the result is still same, can't connect to my wifi again.
2. I tried to root it with both Chainfire tool as well as with SGSIII kit provided here. Both options use ODIN and it's the main problem here.
Once I set my device in Download mode, ODIN doesn't recognize it thus doesn't show anything as detected device and thus I can't go ahead and flash the rooted image thus .tar file .. I am on Windows 8, I tried Windows 7 too but the result is same..
Can anyone suggest me what should I do next.
Thanks..
nicesoni_ash said:
Hi friends..
I bought SGSIII yesterday and started to exploring it's options since then.. As it's my first Android I am using some time to getting use to it..
Now here comes my two problems.
1. I am using a wifi router at my house and at first try I was able to connect to it easily.., but since then I am not able to connect again to the same connection. It finds it, tried to connect but then shows saved and then start searching again and couldn't connect it again. I tried factory settings once and the result is still same, can't connect to my wifi again.
2. I tried to root it with both Chainfire tool as well as with SGSIII kit provided here. Both options use ODIN and it's the main problem here.
Once I set my device in Download mode, ODIN doesn't recognize it thus doesn't show anything as detected device and thus I can't go ahead and flash the rooted image thus .tar file .. I am on Windows 8, I tried Windows 7 too but the result is same..
Can anyone suggest me what should I do next.
Thanks..
Click to expand...
Click to collapse
1) I can't seem to get what the issue with Wifi is but someone might be able to help you out.
2) Seems like you dont have the proper drivers for the device installed. The easiest way to solve this is to download KIES and install it. This will help you get all the necessary drivers and hopefully after that, ODIN should be able to detect the phone. Thats pretty much what I did.
nicesoni_ash said:
Hi friends..
I bought SGSIII yesterday and started to exploring it's options since then.. As it's my first Android I am using some time to getting use to it..
Now here comes my two problems.
1. I am using a wifi router at my house and at first try I was able to connect to it easily.., but since then I am not able to connect again to the same connection. It finds it, tried to connect but then shows saved and then start searching again and couldn't connect it again. I tried factory settings once and the result is still same, can't connect to my wifi again.
2. I tried to root it with both Chainfire tool as well as with SGSIII kit provided here. Both options use ODIN and it's the main problem here.
Once I set my device in Download mode, ODIN doesn't recognize it thus doesn't show anything as detected device and thus I can't go ahead and flash the rooted image thus .tar file .. I am on Windows 8, I tried Windows 7 too but the result is same..
Can anyone suggest me what should I do next.
Thanks..
Click to expand...
Click to collapse
For problem 1.
Call *#0011#
Choose wifi
Turn Power saving mode off.
This is a known problem with some s3's. Including mine. Best to flash cm9 and follow steps above. Its not an exact solution. But is far better than what I was experiencing!
Sent from my GT-I9300 using xda premium
See..... http://forum.xda-developers.com/showthread.php?t=1779318
Sent from my GT-I9300 using xda premium
Hmm.., so it seems that this Wifi problem is pretty known one and most of the users facing this.. Well that's not good.. It's still not working even after disabling wifi power saving option.. Will try to restart my router to see if that will help.
@circuit89
My phone connects pretty easily with my PC when it's ON., problem starts when I put it under Download mode and then try to connect it to ODIN..
Any more suggestions.. Thanks for your replies though.
Restarted my router and wifi seems to be working fine again.. Well I hope it will keep working else I would know that why this is happening. Thanks for your suggestions.. Now I am just more concerned about ODIN problem coz I need to root my device and that's much needed issue.. Thanks.
nicesoni_ash said:
Hmm.., so it seems that this Wifi problem is pretty known one and most of the users facing this.. Well that's not good.. It's still not working even after disabling wifi power saving option.. Will try to restart my router to see if that will help.
@circuit89
My phone connects pretty easily with my PC when it's ON., problem starts when I put it under Download mode and then try to connect it to ODIN..
Any more suggestions.. Thanks for your replies though.
Click to expand...
Click to collapse
Yup, installing KIES should help .When you connect the phone, usually the drivers required for mass storage are automatically installed. Different drivers are needed to get the PC to recognize the phone when it is download mode.
I guess they are ADB related drivers and I saw a prompt for that while drivers were installing but still to be sure I am installing it to see if that would help. Thanks, will notify the result here soon..
Nope, didn't help.. Installed Samsung Kies latest version too but still the same result..
nicesoni_ash said:
Nope, didn't help.. Installed Samsung Kies latest version too but still the same result..
Click to expand...
Click to collapse
It seems to be a unique problem, then. I saw this thread and tried uninstalling all my samsung drivers. I let Kies run in the background and connected my phone in download mode when Odin was running. All drivers got successfully reinstalled. Check whether Samsung USB Drivers are installed when you install Kies. Sometimes, it skips those due to errors. I've encountered that once or so.
nicesoni_ash said:
Hmm.., so it seems that this Wifi problem is pretty known one and most of the users facing this.
Not true a few only have this issue .
My phone connects pretty easily with my PC when it's ON., problem starts when I put it under Download mode and then try to connect it to ODIN..
What happens with Odin ???
Have you replaced Odin with another .
jje
Click to expand...
Click to collapse
Have u enabled USB debugging mode..
Sent from my Desire HD using xda premium
nicesoni_ash said:
Once I set my device in Download mode, ODIN doesn't recognize it thus doesn't show anything as detected device and thus I can't go ahead and flash the rooted image thus .tar file .. I am on Windows 8, I tried Windows 7 too but the result is same..
Can anyone suggest me what should I do next.
Thanks..
Click to expand...
Click to collapse
Unticked USB debugging sounds like the problem.
Sent from my GT-I9300 using xda premium
@JJEgan
Yes, I tried with two different ODIN versions..
@ tommy2601
Yes, I did..
@slking1989
It's not..
I will try to remove all drivers .. then install KIES and then put my phone under download mode to see whether it will install all drivers then.. Will update later how it goes.
Ok.. Installed Windows 7 on my PC just to be sure that Windows 8 is not the culprit.., turned out it is not.. It's not working on Windows 7 too..
One thing to specify here is that when phone is on and if I connect it to my PC, ODIN recognize it and ID part turns to blue but not when I put it under Download mode.. so anymore suggestions friends as this is a nightmare to use it without root..
First, get the driver pack from the forum.
Go to the device manager on the computer when the phone is in Download mode and search it (should have a yellow triangle). Then right-click, Update driver.
Let it search on your computer, it should find and activate it within a few seconds
Sent from my GT-I9300 using xda premium
nicesoni_ash, good to see you're here from dailymobile!
This might sound daft but have you tried another cable?
I was getting problems using the cable that came with my phone, which had an HTC sticker on it for some reason.
Switched to the old cable from my N8 and it worked!
Just a heads up.....note that before flashing with Odin ensure kies is closed in sys tray or it may interrupt flashing process
Sent from my GT-I9300 using xda premium
slaphead20 said:
Just a heads up.....note that before flashing with Odin ensure kies is closed in sys tray or it may interrupt flashing process
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
On my system, I could never get the Kies icon to show up in the system tray, however it is running in the background. He might need to kill the Kies processes from Task Manager.
Eagerly awaiting JB update for my unlocked, stock I9300 (UK BTU).
Trying to do things "by the book" and using KIES to check for updates.
Yesterday KIES announced that it needed to do some kind of update related to firmware...
Now, whenever I try to connect it reports "failed to retrieve device information" and doesn't connect.
I've tried re-installing KIES, and it managed to connect once, after which I get the same message whenever I try again.
I've tried disabling antivirus etc and using their connection troubleshooter, all to no avail.
NOT HAPPY; very bad time for this to happen.
OS is windows 7 64 bit.
Anyone else with the same problem? Ideas?
Thanks
fasty said:
Eagerly awaiting JB update for my unlocked, stock I9300 (UK BTU).
Trying to do things "by the book" and using KIES to check for updates.
Yesterday KIES announced that it needed to do some kind of update related to firmware...
Now, whenever I try to connect it reports "failed to retrieve device information" and doesn't connect.
I've tried re-installing KIES, and it managed to connect once, after which I get the same message whenever I try again.
I've tried disabling antivirus etc and using their connection troubleshooter, all to no avail.
NOT HAPPY; very bad time for this to happen.
OS is windows 7 64 bit.
Anyone else with the same problem? Ideas?
Thanks
Click to expand...
Click to collapse
same think happened to me with KIES. I managed to fix it by couple of times applying that fix connectivity problems thingy from the menu. I've had to reboot the phone too.
You might also want to try re-installing samsung drivers for
nolovelust said:
same think happened to me with KIES. I managed to fix it by couple of times applying that fix connectivity problems thingy from the menu. I've had to reboot the phone too.
You might also want to try re-installing samsung drivers for
Click to expand...
Click to collapse
Thanks for the advice. I tried re-installing KIES and the drivers but it only connected once after their "necessary update"
I'm sure that it's this latest KIES update that has screwed it; was fine until today.
When I tried the troubleshooting wizard, it then told me it was an incompatible phone ;-(
Hopefully if it's a common problem, Samsung might eventually recognise and fix it.
I heard KIES was flakey, now I know :laugh:
OK, I think that I have hopefully found a solution.
I started KIES by right-clicking the icon and chosing "run as administrator" instead of the usual way.
Now everything seems back to normal.
I suspect that their "update" may have messed up access rights in some way beyond my understanding:laugh:
Now it apparently connects consistently OK in the usual way.
I have the same problem driving me mad!
For some reason I can't update OTA I get this message
So I thought hey might try that program kies heard the updates are better too because they do a clean install of them. But it is horrendous!!
I want my update!
Sent from my GT-I9300 using xda app-developers app
After much struggle I tried the run as admin a few times. And it worked once! Just got the update I am blown away how good it is soo far!
I hope everyone gets it soon
Sent from my GT-I9300 using xda app-developers app
hi,
I'm having a major problem updating my LG Prada 3 UK version from gingerbread to the official ICS update. I've not rooted or done any mods. I'm using the official lg update tool with the drivers installed but the update keeps getting stuck at 7%. I pass all the checks the update tool seems to perform before updating but once the update starts always at 7% it gets stuck. It gives me an error message something like this: "There was a communication problem between the cell phone and the PC", with the option to restart. It tells me to unplug USB and take battery out then turn phone on and restart. I do this but nothing works and again stuck at 7%.
I even phoned LG who said it must be a glitch and to keep trying. That's nonsense I've definitely got some kind of issue here. Oh and I've tried the usual: factory reset, reinstalling the USB drivers and LG update tool. Absolutely nothing works.
One more thing, even using the LG PC Suite to update gives me an error message. So I know this isn't to do with the LG Update tool. I have a Win7 installed.
Please can someone help me with this! many thanks
It's possible there's a bad block in the internal memory. You may be able to check for it through a shell.
If it's under warranty, I would try to send it back.
You could also try flashing with the KDZ tool, but if it gets stuck, you might brick the phone.
To work out what the problem is you need to rule out every variable. First try out a different wire/cable. If it doesn't work then try a different computer. If its still not working then there's a good chance it's a problem with your phone.
Sent from my GT-I9000 using xda premium
NIMBAH said:
To work out what the problem is you need to rule out every variable. First try out a different wire/cable. If it doesn't work then try a different computer. If its still not working then there's a good chance it's a problem with your phone.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I tried a different USB cable, and also a different pc but still the same problem. I was thinking of trying to turn off the download mode thing but not sure how that works. I did hold up volume up and power then inserted battery but all that gave me was a SW Update screen.