Related
Hi all,
I would like to change my pictures at start up on my XDAII, it has the latest Rom and Extended rom, which loaded without any hitch at all.
I would like to put my wee logo as the second flash well in the middle, is it possible and if so, is there an idiot guide from a to b to do it.
I have read the threads in other places but I need more help than just to download a file, anyone take the challenge of assisting the techno challenged members :roll:
cheers
TJ
In the 'genuine englisg SE'thread I posted two neutral splash screens for SE.
All you need now is
1. download that zip file & unzip.
2. get the upgrade files you used
3. donwload the ER2003Edit tool
4. get the ExtROM password to open the ms_.nbf (hint: its in dcs's thread on the SE rom
Steps:
1. Open the ms_.nbf from the upgrade package using ER2003Edit by (in the file-open dialog) choosing 'Extended ROM' as the file-type and 'ms_.nbf' as the file
2. Load the splash-screens (splash1.bmp & splash2.bmp) you want
3. SAVE
4. EXIT (discard any error message).
Run the upgrade again.
Note: Instead up downloading the Splash screens, you can also save them from any other ms_.nbf you may have (featuring ie. an O2, Qtek, imate or T-Mobile logo).
hi, i followed the steps... but when i try to open the extended rom with correct password, it prompted me 'Error Accessing Image file'.. can you tell me what happen?
You should choose the "WM2003 Extended Rom (ms_.nbf)" in the file type.
1. Click File
2. Click Open
3. choose the "WM2003 Extended Rom (ms_.nbf)"
4. Then enter the password for ExtROM
4.1. Password: 0x20040305
Help it works...
how i can see my extended rom ?
i have a file name ignore_my_doc in.
i try with unhide and unlock program, but no change ?
any idea ?
-------------------------------------------
Rom version : 2.0.6.00WWE
Radio version : 1.18.00
Protocol version 1337.38
ExtRom version : 1.12.925 WWE
Re: ignore_my_docs in my extended rom (after unhide and unlo
conovor said:
how i can see my extended rom ?
i have a file name ignore_my_doc in.
i try with unhide and unlock program, but no change ?
any idea ?
-------------------------------------------
Rom version : 2.0.6.00WWE
Radio version : 1.18.00
Protocol version 1337.38
ExtRom version : 1.12.925 WWE
Click to expand...
Click to collapse
First unhide and unlock
then reboot.
then use file explorer. of the internal file explorer did not work. try resco file explorer.
Ignore_my_docs = the system dont need to search for my doc files in that storage (card)
thks,
but i already try and no change. i have reco explorer too, but it's no possible to see in the folder.
any other idea ?
conovor said:
thks,
but i already try and no change. i have reco explorer too, but it's no possible to see in the folder.
any other idea ?
Click to expand...
Click to collapse
Make sure that you are using the extended rom unlocker tool.
here some screenshots. the program is located in ur start menu.
and if there still nothing in the extende rom folder that means that the folder is empty. and you dont have any extended rom.
i know how to use the extended rom program, but maybe you are right and it 's empty. but nevertheless it was not empty after the installation of the WM2003SE because i remember i saw the config.txt file.
Maybe i remove soething wrong in the folder.
how i can repair ? can i put some initial extended rom .cab in it ?
thks for your help. sorry for my english.
conovor said:
i know how to use the extended rom program, but maybe you are right and it 's empty. but nevertheless it was not empty after the installation of the WM2003SE because i remember i saw the config.txt file.
Maybe i remove soething wrong in the folder.
how i can repair ? can i put some initial extended rom .cab in it ?
thks for your help. sorry for my english.
Click to expand...
Click to collapse
I think you need to reflash you're device. (everything will be deleted!!).
Or you can just extract the extende rom and copy the extended rom content to youre devie.
read on the from about the the ER2003Edit tool http://forum.xda-developers.com/viewtopic.php?p=101792
that will help to extract the extende rom.
Good luck with it.
NOTE
This is my first cooking, feel free to try it out.
Eventhough I've been testing it and the results are good, conditions still apply: Use this at your own risk :!:
Explanation
This version of ROM is basically a Sin.Merged.v2.0 ROM cooked with xda2jojo/toenailed's extended_rom compression method.
And the result is a fully automatic ROM upgrade which can be done within your XDA II, no PC needed (except when flashing).
The Difference
Sin.Merged.v2.0 :
- Manual ROM merging using ActiveSync (you need to use your PC).
- Extended_rom installed manually using either Sprite BackUp or run it one by one.
Xda2.HERY.mod :
- Automatic ROM merging (no PC needed) continued with automatic extended_rom installation.
- All done automatically following the hard reset after flashing.
Ingredients
ROM = Sin.Merged.v2.0.
Cab files = collected from Sin.Merged.v2.0's collection.
Extended_rom = compressed by xda2jojo/toenailed (using CrunchIt).
Methods
There are 3 ways to take you there.
No matter which method you choose, the end result will be the same.
Method A/B/C How To:
Download the Xda2.HERY.mod.A/B/C.exe
Flash your XDA II by running the downloaded file.
You'll be asked to perform a hard reset after that.
Soon xBackup will automatically start after a while.
Tap "Restore" tab, tick "All Data", open Storage (not Storage Card) and tap Start.
Then wait until it finished, and tap "YES" when it ask for a restart.
Then it will start installing automatically.
Don't bother with the debug pop-up window.
At the end, you'll be asked to choose your provider.
At this point, you HAVE TO choose one then tap "X".
Coz if you don't, it won't restart, and it will ruin the whole process.
If you don't, even another hard reset won't help since the config files in extended_rom has been changed.
Method A/B/C CAUTION :
Whatever you do, DO NOT tap or do anything during the whole process.
You are only allowed to tap "YES" or "OK" everytime.
During the process, NEVER tap anything unless you're asked to (including tapping the Start button).
Changes are made inside the extended_rom during the process.
After everything finish, I've created a file to reverse those changes back to its previous state (before the hard reset).
Therefore when you need to do another hard reset, the files inside extended_rom will be exactly the same as before.
So it is VERY IMPORTANT for you NOT TO interrupt the process except tapping "YES" or "OK" when it asked.
I have tested this method and the result is flawless, but always bear in mind: "Do this at your own risk".
Method A:
Xda2.HERY.mod.A.exe
Method A README.txt
ADVANTAGE :
The benefit of this method is you'll have plenty space in your extended_rom.
The free space can be used to put the cab files that you always reinstall after every hard reset.
DISADVANTAGE :
The downfall of this method is you won't be able to see the compressed cab files.
They will be automatically deleted after the process.
FUTURE MODIFICATION :
Just in case in the future you want to put more cab files into the extended_rom, you have to do the following:
- Unhide & Unlock the extended_rom using the Extended ROM Tools.
- Some cab file is self delete after install, so just to be safe, don't forget to change the cab file's properties to
read-only.
- Copy the cab file(s) into the extended_rom.
- Open config2.txt.
- Add the name of you cab file(s) in the FIRST line, I repeat, ... FIRST line.
- Example, if you want to add a file named "sample.cab", then insert this in the first line, CAB: \Extended_ROM\sample.cab
- Save and close the config2.txt.
- And for security, don't forget to always keep you extended_rom Locked (and Hidden if necessary).
Just in case if you want to see the compressed cab files, just run the ExtROM.exe file in your extended_rom and choose a
folder to extract (if your extended_rom is hidden, Unhide it first).
You don't have to run Unlock the extended_rom to run the ExtROM.exe, just keep it in locked state.
Method B:
Xda2.HERY.mod.B.exe
Method B README.txt
There will be a short delay before xBackup showed up.
Just be patient because a quite large CompactFlashBackUpNew file is being extracted and copied to the Storage folder.
ADVANTAGE :
The benefit of this method is you'll have plenty space in your extended_rom.
The free space can be used to put the cab files that you always reinstall after every hard reset.
DISADVANTAGE :
The downfall of this method is you won't be able to see the compressed cab files.
Because everything has been backed up in a backup file (CompactFlashBackUpNew), which will be automatically deleted after
the process.
Eventhough there's plenty of free space to put extra cab files, with this method, you have to install the added cab files
manually from inside extended_rom.
FUTURE MODIFICATION :
Just in case in the future you want to put more cab files into the extended_rom, you have to do the following:
- Unhide & Unlock the extended_rom using the Extended ROM Tools.
- Some cab file is self delete after install, so just to be safe, don't forget to change the cab file's properties to
read-only.
- Copy the cab file(s) into the extended_rom.
- Run it.
- And for security, don't forget to always keep you extended_rom Locked (and Hidden if necessary).
Method C:
Xda2.HERY.mod.C.exe
Method C README.txt
ADVANTAGE :
The benefit of this method is you'll be abe to see all the installed cab files.
DISADVANTAGE :
The downfall of this method is you won't have much free space left in your extended_rom.
FUTURE MODIFICATION :
Just in case in the future you want to put more cab files into the extended_rom, you have to do the following:
- Unhide & Unlock the extended_rom using the Extended ROM Tools.
- Some cab file is self delete after install, so just to be safe, don't forget to change the cab file's properties to
read-only.
- Copy the cab file(s) into the extended_rom.
- Open config2.txt.
- Add the name of you cab file(s) in the line.
- Example, if you want to add a file named "sample.cab", then insert this line, CAB: \Extended_ROM\sample.cab
- Save and close the config2.txt.
- And for security, don't forget to always keep you extended_rom Locked (and Hidden if necessary).
Just in case if you want to see the compressed cab files, just run the ExtROM.exe file in your extended_rom and choose a
folder to extract (if your extended_rom is hidden, Unhide it first).
You don't have to run Unlock the extended_rom to run the ExtROM.exe, just keep it in locked state.
Millions of Thanks to :
Sin for:
- the Backup.stg file of ROM 2.02.t1WWE.
- all the cab files.
- the genius discovery of merging between ROMs.
xda2ojo & toenailed for:
- the XdA2JoJo[1].v3.0.1t.cab file.
- the CrunchIt.exe file.
- the brilliant idea of compressing extended_rom files.
In conclusion, you guys are simply THE BEST !!!
using the xbackup... :lol:
xda2jojo said:
using the xbackup... :lol:
Click to expand...
Click to collapse
Yes, Jojo, all three methods using xBackup.
But I believe you refer to method B.
For method B, the tricky part is, to make it all run in one step.
As we know, after a ROM flash, all will be back to standard.
I've already put the CompactFlashBackupNew file in the extended rom, which will be auto copied to the Storage folder, ready to be xBackup-ed.
After xBackup complete, you'll be asked to do a reset.
Then, where's the auto config part?
After the xBackup reset, you're suppose to MANUALLY go to Start, Programs, Communication, AutoConfig.
And to clear things up, you have to MANUALLY delete the CompactFlashBackupNew file in the Storage folder.
Plus for safety reason, just in case you accidentally change files in the extended rom, you have to Lock and Hide it, ... once again, ... MANUALLY.
Here's the tricky part, you don't have to do all those things manually.
Everything will be automatic following the hard reset after ROM flashing.
After the xBackup reset, you'll be brought automatically to the AutoConfig, which will bring you to another final reset.
After that, ... voila, you're done.
And the CompactFlashBackupNew file in the Storage folder will be automatically gone, plus your extended rom will also be automatically locked and hidden (you can always unlock or unhide it with the pre-installed Extended ROM Tools).
So no need for you to do step 2, 3, etc.
Only 1 step, and it'll take you to straight to the finish line.
So does the other methods, all in 1 step.
Can anybody tell me the passwords for these files? I want to use them on a german t-mobile device.
Thanks
Password?
What do you mean?
I didn't put any password.
Is it the password to open/run the file or to download the file?
The Password to change the country ID. I need a password if I want to change it in ER2003 Edit.
Or are there any other ways to do it?
Thanks Herry
For ur rom!!!
VIVA O2XDAID !!!
bravo hery go go go hihihi
Hopefully it works, Phreak.
Mengesankan herry.
Halo kepada teman saya di Bali.
Bagaimana membicarakannya benang merah ini menggunakan indo bahasa?
:wink:
Hey, I didn't know that you can speak Indonesian, Jojo.
If you find it hard to say it in indonesian, then just do it in english.
Surely most of indonesian gadgeters speaks english.
hch_111 said:
Hey, I didn't know that you can speak Indonesian, Jojo.
If you find it hard to say it in indonesian, then just do it in english.
Surely most of indonesian gadgeters speaks english.
Click to expand...
Click to collapse
hahaha...
How about this...
''If you find it hard to say in ENGLISH, then just do it in INDON.
Surely SOME(hehehe...some of my friend) of indonesian gadgeters HARDLY speaks in english''.
Yo! my friend.... :wink:
is it Indonesian EXT-Rom only?
It's nice to know our gadgeter (indonesian) can improve the extended room for XDA. i hope we can make better one in next day.
but i've some question for u herry.
1. This rom is only for indonesian user?
2. wht's content in this rom? is it same like the xda2jojo's rom?
3. Any freatures are good in urs rom?
Just inform to you, i'm also cooking my extended room for indonesian only. but i'm not a programer. so it'll take long time.. he he.. i hope we can combine with the others.
btw.. where do u life? tinggal dimana pak?
for XDA2Jojo, i think i must learn from u so much more, buddy. would u teach me about cooking? ya... maybe about some philipine's cooking? ok, thank's b4..
Salut!
Iya donk, gadgeteer Indo jgn kalah...
Tapi kayaknya cara kamu ribet deh. Pake XBackup lagi... PELAAAAN nya ga tahan. Bisa mandi dulu, makan dulu & blm selesai juga. :x
Gue sendiri pake Sin Merged tapi ext romnya gue ganti dgn file2 sendiri kecuali Sin Merged v2.0.cab. Khususnya carrier files hanya gue tinggalin yg gue pake aja. Lagi tunggu Win2K5 nih... kayaknya the great Buzz baru saja release full 128 RAM.
Anyway, keep contributing! 8) 8)
Re: is it Indonesian EXT-Rom only?
moeya said:
It's nice to know our gadgeter (indonesian) can improve the extended room for XDA. i hope we can make better one in next day.
but i've some question for u herry.
1. This rom is only for indonesian user?
2. wht's content in this rom? is it same like the xda2jojo's rom?
3. Any freatures are good in urs rom?
Just inform to you, i'm also cooking my extended room for indonesian only. but i'm not a programer. so it'll take long time.. he he.. i hope we can combine with the others.
btw.. where do u life? tinggal dimana pak?
for XDA2Jojo, i think i must learn from u so much more, buddy. would u teach me about cooking? ya... maybe about some philipine's cooking? ok, thank's b4..
Click to expand...
Click to collapse
Sorry for the late reply.
Allow me to answer the Q's:
1. Actually the only thing that make this one feels like Indonesian ROM is the AutoConfig cab files, which consist 3 Indonesian provider.
For other countries have to search or find the suitable cab file(s).
The rest (other than AutoConfig stuff) are all universal use.
2. Nope, the same thing about JoJo's version is the cooking method (using the compressed ext_rom). It's more alike to Sin.Merged.v2.0's version.
3. The good feature in this ROM is the ability to do it all automatically.
Thank you, hope it explains.
See ya again, friend.
MMS setting for mentari subscriber
can anyone with working mms setting using mentari card, plase post their setting in here.
i tried to set mine but still won't connect to the server / mms won't send.
already went to mentari shop, but still won't work. the step by step they used is for 1.60 rom, i think not for the 2003se version.
so, once again anyone with working mms setting for mentari, please help me.
tks.
Hi there, flashed the rom on my XDA II using method C, was wondering if I got it correct. Whenever I soft reseted my PDA, there will be a prompt from PHM reset for me to reset the phone shortly after load up, as you can see it will be an endless loop if I did not choose "NO" when prompt to reset the phone on startup. Will like to know if this is normal ir did I do something wrong during the process.
Thanks in advance
naoki1980 said:
Hi there, flashed the rom on my XDA II using method C, was wondering if I got it correct. Whenever I soft reseted my PDA, there will be a prompt from PHM reset for me to reset the phone shortly after load up, as you can see it will be an endless loop if I did not choose "NO" when prompt to reset the phone on startup. Will like to know if this is normal ir did I do something wrong during the process.
Thanks in advance
Click to expand...
Click to collapse
Can you tell me what files you have in \Windows\StartUp?
Hery
What is the content of the file 'CompactFlashBackUpNew'?
Is it important
Did you actually notice a difference between merged and non-merged performance (with exactly same extended-rom)?
:!: :?: :roll:
llbasha said:
Hery
What is the content of the file 'CompactFlashBackUpNew'?
Is it important
Did you actually notice a difference between merged and non-merged performance (with exactly same extended-rom)?
:!: :?: :roll:
Click to expand...
Click to collapse
Yes, it is very important.
It contains all the extended ROM that listed in the other methods.
Like I said, all three methods ended up with same results.
Nope, I didn't try to put the extended ROM in merged and non-merged.
Since this already concluded by Mr. Sin that merged one is better than non-merged one, therefore I just use the merged one instead of the non-merged one.
Thanks.
I know this is purely cosmetic but it really does bug me, lol!!
Anyone managed to get a 3G icon instead of the U on the 1.35 HTC SA ROM??
My original orange UK rom had this.....
S.K.
If u install the T Mobile Dailer, 3G Icon will be show!
ctohang said:
If u install the T Mobile Dailer, 3G Icon will be show!
Click to expand...
Click to collapse
What T-Mobile ext ROM should I get this from?? Tried the T-Mobile_UK_Vario_2_ExtROM_WWE.zip on the ftp but cant seem to find the correct cab.
S.K.
Hi
It should be the "MT_PC_Hermes_TMO_REG_060612.CAB".
scorpio16v said:
Hi
It should be the "MT_PC_Hermes_TMO_REG_060612.CAB".
Click to expand...
Click to collapse
Ok, tried installing this with no effect, the U is still displayed....
Any ideas?? Try after a hard reset perhaps with no ext rom installed??
UPDATE: Tried hard resetting and installing the whole ext rom from T-Mobile but have had no luck. Still have a U instead of 3G
Any other ideas??
S.K.
look at cab files installed in \windows\preautorun*
woh...tat's coool.....is that anyway to do it MANUALLY>???
I have installed this file!
http://forum.xda-developers.com/download.php?id=14522
Just only install it and reset!
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.
I'd like also to change the 3g icon with the U. Thanks
while we are at it could we possibly make this so the G is an E??
sas90850 said:
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.
Click to expand...
Click to collapse
Yeah!! This worked. Was a bit dubious about replacing my current dll with this one since the file size is only about 1/3 of the original but it worked!!
I now have a 3G icon istead of a U and so far have found no bad side effects.
I have also attached here my original dll so that people may change their 3G icon to a U if they so wish.
Instructions are the same as the quote, but you must copy to the device first and then copy it to windows using a file explorer on your phone. It will not copy direct to windows through activesync (Access Denied)
Cheers peeps
S.K.
sas90850 said:
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.
Click to expand...
Click to collapse
When I did this, (1) I can copy the file from windows to my storage card as a backup, but (2) I cannot delete it, and (3) nor can I copy your file to overwrite the original one in \windows - it says, it is etiher access is denied, or the file is being used. Any idea whe I should do?
Thanks.
shogunmark said:
while we are at it could we possibly make this so the G is an E??
Click to expand...
Click to collapse
Hi
I've opened the phcanOverbmp.dll with "xnresourceeditor" and it contains only the symbol and the "two arrow-connection-animation" and some other icons.
The "G" must be in an other .dll.
You must only find the right one and then you can edit the icon to whatever you want.
Nicer 3G Icon...
Nicer 3G Icon....
Change the 3G icon From "U" to "3G"
I attached a zip file which contain a dll file : "phcanOverbmp.dll"
Step:
1. Copy to \Windows and will overwrite the existing one.
2. Soft Reset.
Make sure you backup the orginial one "phcanOverbmp.dll" in case you encounter any problem.QUOTE]
Strange.....
Now I cannot overwrite the file at all. Both on my pc and my device it says the file is in use
S.K.
silent_killa said:
Strange.....
Now I cannot overwrite the file at all. Both on my pc and my device it says the file is in use
S.K.
Click to expand...
Click to collapse
Hi
Maybe an program takes acess to the .dll ? I would try a softreset and switch off the phone-part in the comm-manager.
you've done it once, why it shouldn't go a second time ?
scorpio16v said:
Hi
Maybe an program takes acess to the .dll ? I would try a softreset and switch off the phone-part in the comm-manager.
you've done it once, why it shouldn't go a second time ?
Click to expand...
Click to collapse
Still no joy
The exact error meaasge I get on my phone using Resco Explorer 5.42 is "Cannot overwritefile 'phcanOverbmp.dll'. The process cannot access the file because another process has locked a portion of the file."
Shame, i'm trying to have a look at the Nicer 3G icon that has been posted here.
S.K.
Try to turn the phone off in communication manager
scorpio16v said:
Hi
I've opened the phcanOverbmp.dll with "xnresourceeditor" and it contains only the symbol and the "two arrow-connection-animation" and some other icons.
The "G" must be in an other .dll.
You must only find the right one and then you can edit the icon to whatever you want.
Click to expand...
Click to collapse
im not sure which dll it is for G icon.. i know the actual icons exist in the rom, i tried to replace them with E icons and same names but didnt work, so yes, there has to be a dll for it..
First format flash card to fat(not fat32).Copy your boot.ini from c: and paste it on formatted card.extract the flash.bin and the loader.bin from the rar and paste in the card too.turn off the phone.press hang up and back buttons at the same time(this are the firs and the second from right to left).Hold this two buttons pressed and hit the power button.You will see a wait screen and boot menu.Sit and wait.After 3-4 minutes the flash will ask you to reboot the phone.reboot and enjoy.
://rapidshare.com/files/335351963/t5355romenglish.rar.html
what is this?
velis333 said:
First format flash card to fat(not fat32).Copy your boot.ini from c: and paste it on formatted card.extract the flash.bin and the loader.bin from the rar and paste in the card too.turn off the phone.press hang up and back buttons at the same time(this are the firs and the second from right to left).Hold this two buttons pressed and hit the power button.You will see a wait screen and boot menu.Sit and wait.After 3-4 minutes the flash will ask you to reboot the phone.reboot and enjoy.
://rapidshare.com/files/335351963/t5355romenglish.rar.html
Click to expand...
Click to collapse
Does this have TouchFLO too
(Thread moved into correct forum section)
hey , this is a mistake, mistake, mistake.
this is not a HTC is a china phone ;=)
how can i flash the phone with this files
my english is not good i am from germany sorry ;=)
clones.
This thread is for chineese clones.NOT FOR HTC PHONES.the rom is clean without TF3D.
zip25 copy text from the first post,go to google translate and paste it there
velis333 said:
First format flash card to fat(not fat32).Copy your boot.ini from c: and paste it on formatted card.extract the flash.bin and the loader.bin from the rar and paste in the card too.turn off the phone.press hang up and back buttons at the same time(this are the firs and the second from right to left).Hold this two buttons pressed and hit the power button.You will see a wait screen and boot menu.Sit and wait.After 3-4 minutes the flash will ask you to reboot the phone.reboot and enjoy.
://rapidshare.com/files/335351963/t5355romenglish.rar.html
Click to expand...
Click to collapse
just to ask you where do I find this "boot.ini file"
reupload
Please, re-upload the file. Can't download it.
Put it on mediafire.com or megaupload.com
boot.ini is on C: @ windows XP but not need i think
carnot said:
Please, re-upload the file. Can't download it.
Put it on mediafire.com or megaupload.com
Click to expand...
Click to collapse
Code:
[URL="http://www.topaz.htchack.com/website.html"]Topaz File Mirror[/URL] =>XDA=>Official_ROMs=>WM6.5=>ChineseClone_ROMs.
[URL="ftp://ftp.giesecke.tk"]FTP[/URL] User [I][COLOR="Red"]xda[/COLOR][/I] Password [I][COLOR="Red"]xda[/COLOR][/I] =>XDA=>Official_ROMs=>WM6.5=>ChineseClone_ROMs
[URL="http://www.topaz.htchack.com/diskstation.html"]BeeGee's Disk Station[/URL] User [I][COLOR="Red"]xda[/COLOR][/I] Password [I][COLOR="Red"]xda[/COLOR][/I] =>XDA=>Official_ROMs=>WM6.5=>ChineseClone_ROMs
Holy smoke that's a really comprehensive list. I'd copy it over to my thread but I can't post links
dhgate.com/htc-t5355-diamond2-quad-band-3-2mp-wm6-1/p-ff80808123c751bc0123c81009e8129f.html
this is my phone, do you think i can flash it with this rom?
carnot said:
dhgate.com/htc-t5355-diamond2-quad-band-3-2mp-wm6-1/p-ff80808123c751bc0123c81009e8129f.html
this is my phone, do you think i can flash it with this rom?
Click to expand...
Click to collapse
Yep thats a Black Diamond
forum.xda-developers.com/showthread.php?t=619643
I have the ROM Kitchen for that phone but there are actually two versions C01 and C02. I have made an english ROM for C02 version. There are instructions on mobileuncle.com somewhere that tell you how to identify between the two versions I just need to find it and translate
Actually, it's pretty simple, the one that comes with A-GPS is C02. The one with only GPS is C01
carnot said:
Actually, it's pretty simple, the one that comes with A-GPS is C02. The one with only GPS is C01
Click to expand...
Click to collapse
Right that would make sense lol. The screens for GPS should be different.
Can you post the english wm6.5 rom for my phone? t5355 black diamond
carnot said:
Can you post the english wm6.5 rom for my phone? t5355 black diamond
Click to expand...
Click to collapse
Have tried upgrading to WM6.5 Chinese yet? I want to be sure that the instructions I've given actually work first
I'm scared of upgrading it and not knowing how to deal with it, when it's in chinese.