Just wondering if someone can confirm the above?
I have this skin. It's more firm rubber than gel (and brilliant if anyone is wondering )
It probably adds 1-1.5mm thickness around the phone, so total extra front to back would be between 2 and 3mm. How tight is the fit on these holders?
Many thanks
You certainly will not be able to use the Brodit mount with any skin. It fits very snugly to the bare phone, which then ensures that it can hold the phone firmly even in landscape mode
Brodit fits perfectly as mentioned above, it doesn't take too long to take the case off though (which is what I used to do before ditching the case altogether).
Related
Hi all
I haven't found any topic about this case, so here it is:
I recently bought a Tuff-Luv Executive leather pouch for my HTC HD.
http://www.amazon.fr/Tuff-Luv-Execu...1?ie=UTF8&s=electronics&qid=1235746989&sr=8-1
It is quite good, the phone fits very well in it (the camera hole is a bit too low but it is ok anyway). the phone can still be easily to removed from the case.
And it is one of the few leather cases for that phone, that has a hatch that opens to the lower part of the phone (sorry, can't find the words in English, you can see picture) so this is appreciable.
everything is easy to access: stylus, usb port even when the case is closed , volume control, audio jack. Plus it is less expensive than Noreve and Proporta cases (probably not the same durability, but this I can only tell after a while, as it seems to carry on well for now)
So I would gladly recommend it. Anyone else has this case ?
Hope it works out for you. Looks like a pretty well made case.
I'm still trying a few different cases for my HD.
First was the PDA Air book style but it didn't take too long for me to get concerned the two plastic arms that holds the unit in the case are not that secure. The unit can slide and as it is also a belt clip case last thing I wanted was my new shiny HD sliding out and bouncing on the pavement. :-(
Currently have a two piece case of eBay described as "black rubber". Really more of a plastic than rubber and it will do for the short term as only a few dollars.
Today I ordered a Krusell Orbit case. Has the removable flap which covers the screen. I am hoping that with the main section of the case still on the unit it will still fit in the cradle I have. (My cradle has a bit of space around the unit which I hope will accommodate the case)
Your case look good too but the flap attached to the rest of the case at the base so wouldn't allow the unit to sit in the cradle.
Did anybody here buy the holster from the tmobile store that they have that the g1 supposedbly fits in?
its around 24$ i think.
It was closed by sort of 2 clip things.
i'm primarily looking for a horizntal belt holster...
any ideas?
i have the body glove, it is in that price range. love it if thats what your asking
Theres a magnetic one, that fits a sidekick, it's what i use.
Body Glove
I have the Body Glove also and it's great. Perfect for the person (like me) who is rough on phones. And it looks good too.
I purchased the crystal gel case from boxwave It covers the G1 completely and offers excellent protection for when you drop the phone. I also bought the niteize side belt case. It clips on your belt and the elastic allows it to expand enough for the phone with the gel case on it to fit.This case closes with velcro so there are no magnets to create problems.
I got the one from the T-Mobile store last week but it's not the up and down one. But I have to admit was worth the money (even though I didn't end up paying for it love the gf) The one I got sits sideways but very nice and fits the phone well. Was a little snug at first but about 2 days later the phone just slides in to the case very nice.
Chedderknight said:
Theres a magnetic one, that fits a sidekick, it's what i use.
Click to expand...
Click to collapse
I talked to a TMO rep at the store and said no accessories for G1 should have any magnets due to the compass feature. He advised that if you are going to use an aftermarket case, to make sure it doesn't have any magnets. The case TMO sells are magnet free for the G1.
As for the holster, I have it and though it fits the phone snug, be careful as the screen is facing out so make sure you have a screen protector.
I just bought my G1 last 2 weekends ago with a tmobile store belt clip, fits perfectly, sturdy rotating clip for horizontal or vertical placement, gets annoying having to take it out to text or open keyboard but otherwise perfect...24$
the pleather tmo horizontal case with attached clip. it's soft but not screen friendly soft on the inside so the screen protector is a must. great product though.
One warning. If you have a tendency to forget to snap the buttons, make sure you're using a hard or jelly shell to make the phone fit snugly. the basic stretchy straps on the sides are just barely too long to make the phone 100% secure IMHO without it.
i personally like this one.
http://www.fommy.com/view-full-page.asp?divid=T-Mobile&model=T-Mobile+G1&cat=Cases&skuno=82922
you can use it with the screen either facing out for in for screen protection.
I bought this one by Seidio. I had one just like it for my Blackberry 8820 and loved it. I love this one too.
http://www.g1depot.com/seidio-spring-holster/4A24A4902.htm
Buy a bodyglove that has a belt clip for your g1 phone. You won't need to buy a suction cup or dash holder for your g1.
I clip it to my rear view mirror after pushing back the rear view mirror tab. Then I close the tab. Stays in place and very sturdy. It's even easier to see since it is under the rear view mirror and safer too!
I also can use the belt clip to hang the phone off my laptop. I don't clip it, just use the space between the glove and clip to hang it.
Also, the rubbery glove protects your phone if you drop it.
Has anyone found a leather flip case for the Pure?
The only ones I've seen that even come near are over $50
which to me is just too damm much for a case
Heres my take on it
Many complain the Pures a "fingerprint magnet"
OK Maybe so but I can't really see putting the clear "helicopter rotor"
body armour shell, because the don't protect against inpact damadge only scratch damage.
A flip type case that is not removed (I don't want a pouch type)
is one hand to open and you don't need to put the case somewhere while using it.
It will protect both the body and screen against impact and scratching
Leather is reasonably smooth so it wont snag going in and out of my pocket
(like the silicon ones can) Its a little thinner than the silicon and hard rubber ones too. I think same or more durable than Silicone.
Taking it a step further I am normally not a big fan of the belt clip
prefer the pocket but have been thinking about a modular mounting system
where I cold move the clip directly to a car kit or desktop kit for charging
Using the locking swivel clips would allow for landscape or regular viewing
And since the clip is the mounting point not an indentation or cup,
you would keep the case on even in the mount. the cover would just be flipped opened to the top or side when in use.
Now I don't claim to have created the idea I've seen a nice one
for the Diamond2 and a few extra swivel clips could adapt most
any car and desk cradle or mounts.
I've attached one one Ebay thats for the Diamond looks pretty good
But I've bought too many cases for Diamond where the clip just won't stay attached to the Pure.
The mfr of this case recommend I wait a few weeks the Pure Case is
coming in then. Like to hear pro's and cons from anyone who has a similar
flip style case. Also like to hear pro's & cons on which side the flip cover is on
Side top or bottom? Ideally you could use the camera while in the case
without the flip cover obscuring the lens folding arrangement or maybe a
hole in front and back covers so you could fold front over rear cover?
Also possibly cover fastens in half open position so a quick desktop easel.
Any thoughts?? what am I missing (aside for individual preference)
I've obviously got too much time on my hands <BG> and there are
not enough actual cases for the Pure that are available for purchase .
I Love the Pure/Topaz
(running Duttys HGR1 Rom)
New to phones
Old to PCs and PPC (Ipaqs for years) and embedded micros
KJL
Heres the one for the diamond2 I was looking at
Item number: 200403300227
I like the mounting (leather straps not a clip)
But I think one with a side flip/ book style makes using the camera easiest
I currently have the Telus leather holster for my Touch Pro 2, however, I must say that this thing is a piece of crap.
I'm on my second one in ~3 months. The part that holds the clip to the holster just pulls off...
I wear the phone / holster constantly, so I need something that's going to hold up to wear-and-tear. It needs to be leather, it needs side in-and-out vertically (I've seen iPhone holsters where the iPhone slides in-and-out horizontally...which is terrible imo), and it needs to have a magnetically-attaching strap to hold the phone in place (the way I wear it, it's sometimes point down...don't want the phone just sliding out...).
To be totally honest, I LOVE the Blackberry holsters...the only thing I like about BBs, actually...
So if someone could suggest and preferably link to some high-quality TP2 holsters, that'd be great!
Thanks
It may sound silly but I have gotten my last two holsters (one for my tilt and one for my tilt2) at our local flea market. $5 for a leather holster with magnetic clasp with both a metal spring clip on the back and 2 belt loops. The nice thing about doing the flea market thing you can get a better fit in most cases.
You might check out Sena Cases or Krusell. They both make nice leather cases.
Any other suggestions?
>_>
The large pda Krussel case is the way to go. It also has a belt loop.
No sense loosing your device to a belt clip.
Only problem with it is you can't use the usb dongle.
Seems like there's finally an option for those of us that want to use the cradle without having to fiddle with removing the case. Check out the Sony carrying case SGPCV1, it's a thin padfolio type case that can double as a fold back stand. I'm not sure how it works so that it fits into the cradle, so hopefully somebody on here that desperately wants to use their Tablet S in a case with their cradle will buy one and show/tell us all. It does require you to basically glue the case to the tablet's back using weak adhesive pads.
I checked it out in Sony website, it's kind of thick and wonder how it can fit into the cradle
It doesn't. I've bought Sony Tablet last week along with a cradle and the mentioned case. The case is excellent, btw: thick, but fits tablet perfectly, can serve as a cradle itself and is nice to hold. But it doesn't go into a cradle. The only option (besides removing it every time, which is not recommended) is to semi-open it (see the third photo on sony-asia.com/product/sgpcv1) and insert a cradle inside. It's too much hassle, so I just shelved the cradle and use the case at all times.
It does kind of fit if you fold the case back on itself, but it's more convenient to remove the case when docking and reattach at a later time with the velcro fasteners that come with it.
Yes, but a tablet also sticks to gel pads, which become dirty when you remove the case often, and need replacing -- and there's only 4 or 6 spare ones!
Zverikk said:
Yes, but a tablet also sticks to gel pads, which become dirty when you remove the case often, and need replacing -- and there's only 4 or 6 spare ones!
Click to expand...
Click to collapse
Would the tablet be held onto the case properly with just the velcro attachments, minus the gel pads? I was thinking that was one way of how this case worked with the cradle...you removed the tablet from the velcro and put the tablet into the cradle without the case at all. Which really isn't using the tablet within the case and the cradle like I had hoped.
I could also see that what makes this padfolio case unique compared to other Tablet S compatible ones is that it leaves the thinner lip edge wide open and attaches to the thick end. The thin lip end I figured was the part that really needed to make contact with the cradle, so wouldn't folding the cover backwards so that the bottom edge is exposed let it fit? That is to say, the cover would actually fold behind the cradle and cover the back of the cradle once the tablet is docked.
Elsydeon said:
Would the tablet be held onto the case properly with just the velcro attachments, minus the gel pads?
Click to expand...
Click to collapse
I guess, yes, although it would be not as firm, and may be uncomfortable to hold.
The thin lip end I figured was the part that really needed to make contact with the cradle, so wouldn't folding the cover backwards so that the bottom edge is exposed let it fit? That is to say, the cover would actually fold behind the cradle and cover the back of the cradle once the tablet is docked.
Click to expand...
Click to collapse
Yes, that works. But the folding part of the cover does not stick to the back of the case, so it would lie on a table, looking very strange. As I've mentioned, the cradle can fit inside the half-open case (see attached image).