If like me, you have problems on O2 receiving a picture message because O2 decide to resize it to 100*100....so small that you can barely make out whats supposed to be in the picture, here is a simple fix! It does involve editing the registry though!
Browse your way to:
HKLM>Software>ArcSoft>ArcSoft MMS UA>Config>mm1>WspHeader
There are two strings we need to change and that is the "User Agent" & "x-wap-profile"
The standard data in these strings are as below incase you need to revert back!
User Agent - Toshiba-TG01-orange/ArcSoft/MMSUA/PPC/v5.5
x-wap-profile - http://gphone.toshiba.co.jp/tech/profiles/UAPROF/EUR1/TG01-2.0.xml
The correct settings which work are:
UserAgent= HTC_HD2_T8585
x-wap-profile= http://www.htcmms.com.tw/gen/HTC_HD2_T8585-1.0.xml
I believe the problem is with the Content Adaptation service provided by O2. After I changed my registry to fool it into thinking my TG01 is a HTC HD2 (which going by the .XML file the MMSC server is supposed to read, the maximum size should be 1600x1600), I sent myself a picture that was something like 1536*2048 and 284kb in physical size. By all means the Content Adaptation system should resize it to 1600 in either length or height but it didn't. It resized it 768*1024!! (Whereas before on my TG01 registry settings, it resized it to 100*75)
I have noticed a very interesting string in the online XML file for the HTC HD2
<mms:MmsMaxImageResolution>1600x1600mms:MmsMaxImageResolution>
Where as in the XML file for the TG01 its
<mms:MmsMaxImageResolution rdf:datatype="Dimension">1600x1200mms:MmsMaxImageResolution>
So I am going to make my OWN .XML file based on the HTC's and put that into my registry with picture resolution sizes of 1000000*1000000 See what happens, I bet their MMSC server will burn!
Registry
Sorry to sound like a noob, but how can I access the registry for the TG01. I assume that it's not freely accessible since it could cause major issues
Many thanks
Registry
Sorry to sound like a noob, but how can I access the registry for the TG01. I assume that it's not freely accessible since it could cause major issues
Many thanks
EDIT: Used PHM registry editor. Was amazingly simple to do. Why can't O2 just change the settings and issue an update? Oh well. I'm sure someone will try and change it, screw it up, and spend hours on the phone to customer services
MattTG01 said:
Oh well. I'm sure someone will try and change it, screw it up, and spend hours on the phone to customer services
Click to expand...
Click to collapse
Like me, I spent somewhere in the region of 10 hours on the phone with them.......****ing arseholes!
Sorry I didn't reply, I am not on the forums much
Related
does anyone one know if it is possible to disable the autosave feature or perhaps to alter the period to something longer then five minutes or whatever the default is. i work with really large documents and am constantly being interupted.
There's no any registry hack for this :?
suckzor!!!
the joy of techie buddies
i gave it to a friend of mine and he came up with this
registry editor
hkey.current.user
software
microsoft
windows ce sevices
change value flag to 0
seems to work, but i'm wondering what else this might do...
Hi everybody,
i just installed SPB pocket Plus 2.2 software on my MDA2... after installing a previous version (i guess but i don't remember which one).. i realised that on the today screen i cannot choose anymore to view the "Storage Card" icon... anybody can help about this?
nobody has the same problem?
Anonymous said:
nobody has the same problem?
Click to expand...
Click to collapse
Use SRS to see the entire today, SPB+ sometimes cuts some part of todya
I am using sbp Pocket Plus 2.0 and did not face such a problem, I am not aware about version 2.2!
Hi dNuOs,
I've got exactly the same problem - I've emails Spb about it, but no answer yet.
Also missing Storage Card
Current version: 2.2 build 1649
URL http://www.spbsoftwarehouse.com/downloads/pocketplus/SpbPocketPlus2_setup.exe
Date 10/29/04 16:53:52
Size 1138228
Download date: 11/02/04 11:19:16
Only see main memory, So nothing about my Storage Card
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Firstly, enable the backup battery icon, move it too position 1, i.e. the first icon on the today screen.
Then use a registry editor and go to
HKEY_LOCAL_MACHINE
Software
Spb Software House
Pocket Plus
Today Items
Pannels
00000
Modify the 'Action' string and change *backupbattery to *storagecard
Then tap&hold on the tab where you want the icon to appear, choose add/remove items and you will see Storage Card 1 Indicator, it can be enabled and will then show on the today screen. No problem.
I found that you can use this method to add multiple instances of the same indicators if you want.
NOTE that if you did not move the backupbattery icon to postion 1, then you will have to edit the string value at the appropriate position, it will be one the values 00000-00004
Cheerio
Thank you
hshortt said:
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Cheerio
Click to expand...
Click to collapse
Great...
hshortt said:
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Firstly, enable the backup battery icon, move it too position 1, i.e. the first icon on the today screen.
Then use a registry editor and go to
HKEY_LOCAL_MACHINE
Software
Spb Software House
Pocket Plus
Today Items
Pannels
00000
Modify the 'Action' string and change *backupbattery to *storagecard
Then tap&hold on the tab where you want the icon to appear, choose add/remove items and you will see Storage Card 1 Indicator, it can be enabled and will then show on the today screen. No problem.
I found that you can use this method to add multiple instances of the same indicators if you want.
NOTE that if you did not move the backupbattery icon to postion 1, then you will have to edit the string value at the appropriate position, it will be one the values 00000-00004
Cheerio
Click to expand...
Click to collapse
Mate, you're just great!!! It works perfect, thanks for your support.
Just one question... how you managed to do this? I mean, how did you know the correct name was "*storagecard", just checked on a previous version of the software i guess...
thanks again
Heh heh, glad it's working for you guys.
I knew that the name would be storagecard, just from the formatting of the other names, I took a gamble I guess but I had a good idea it was correct. :lol:
Cheerio
Howard
dNuOs said:
Hi everybody,
i just installed SPB pocket Plus 2.2 software on my MDA2... after installing a previous version (i guess but i don't remember which one).. i realised that on the today screen i cannot choose anymore to view the "Storage Card" icon... anybody can help about this?
Click to expand...
Click to collapse
This is not an error, it is a precise will of SPB.
When I wrote to them because of a problem of my version 2.1, they told me that on some machines this option created hard resets :shock: , so they decided to move it out in some following release. And here we are.
Well I've not had any hard resets, and I wanted the feature, mostly for appearance sake, as three small icons did not fill the width of the screen but four do!
I can image senarios that might cause problems with this icon, but it's down to programming, if SPB refresh the states too frequently, it will cause a performance overhead, and with any additional cards it causes i/o to check capacity.
There's no setting to adjust the refresh interval, but as I said I've not had any problems, and I did not see any release notes that talked about the removal of a feature!
Cheers
hshortt said:
Well I've not had any hard resets, and I wanted the feature, mostly for appearance sake, as three small icons did not fill the width of the screen but four do!
I can image senarios that might cause problems with this icon, but it's down to programming, if SPB refresh the states too frequently, it will cause a performance overhead, and with any additional cards it causes i/o to check capacity.
There's no setting to adjust the refresh interval, but as I said I've not had any problems, and I did not see any release notes that talked about the removal of a feature!
Cheers
Click to expand...
Click to collapse
I agree with you, but this is what PocketPlus product manager told me
Of course they are not willing to advertise a loss of functionality, at least until they find another solution...
OOPS-It was me
Anonymous said:
I agree with you, but this is what PocketPlus product manager told me
Of course they are not willing to advertise a loss of functionality, at least until they find another solution...
Click to expand...
Click to collapse
New version 2.2 build 1650
URL http://www.spbsoftwarehouse.com/downloads/pocketplus/SpbPocketPlus2_setup.exe
Date 11/09/04 20:00:07
Size 1136277
Download Time 11/13/04 00:22:31
Pocket plus incompatibility on IPAQ h6365/h6300/h6315
hshortt said:
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Firstly, enable the backup battery icon, move it too position 1, i.e. the first icon on the today screen.
Then use a registry editor and go to
HKEY_LOCAL_MACHINE
Software
Spb Software House
Pocket Plus
Today Items
Pannels
00000
Modify the 'Action' string and change *backupbattery to *storagecard
Click to expand...
Click to collapse
I install spb pocket plus 2.2 on iPAQ H6365, I realized a few problems been encountered. I sent a text message to someone, but he could receive the same message for up to 5 times intermittently, I won't realized that till the party mention it.
I'm not sure if you'd also know the remedy for this sickness
The fix to this has been posted several times on other threads, but all you have to do is add an exclusion to the "close button" enhancement for tmail.exe.
tmail.exe is closing before it's getting chance to send the whole text properly and is sending it more than once.
You should also be careful with enabling the SD card monitoring feature - it appears to be this that is causing the xda2 to lock up/die with no option to fix but to hard reset/remove battery (not spb's fault, it happens with other today plugins too). Apparently it's the hardware - this is why spb removed the functionality.
You may think it's running ok, but please don't be using your xda for anything life critical (e.g. mapping out someone's brain operation). Mine was fine for two months before it started displaying this behaviour!
rgds,
Alex.
That little fix for restoring the SD card monitor was mine, and when I looked SPB are now claiming that it may cause lockups on ROM Version 1.60
I'm on 1.72 and with this fix and SPB 2.2 I've no problems. Something about this issue could be done by SPB, one solution would be to include a refresh timer, aka Battery Pack. The issue with lockups can occur when the request for capacity is sent to the expansion card. This could happen when there is i/o on the card and thereby cause a possible problem.
All that said, I've *never* (yet!) had a problem with SPB 2.2
Thanks
Howard
NinjaDonkey said:
The fix to this has been posted several times on other threads, but all you have to do is add an exclusion to the "close button" enhancement for tmail.exe.
tmail.exe is closing before it's getting chance to send the whole text properly and is sending it more than once.
Click to expand...
Click to collapse
NinjaDonkey, thanks for the guide on this, I just did the "Exception" on tmail.exe, with spb pocket plus 2.2. But do not know yet if problem would persist, guess wouldn't be.
Do you know whether it's using lots of memory in the today plug-ins as we customize to display many programs on the today screen? You know those with Main, Connection, System, etc... Especially in the system, it's by default been customized to display quite a few of programs/system programs, would this be a factor to slow down or cause a hang on the ppc? If your answer yes, then i guess i am going to remove those of un-needed ones.
It seems like...we can all easily build ROMs....if you're in here, you're diggin in with dcd....
What we need is a list of OEMs that people can add into their ROMs.
For example...I found Arcsoft MMS: 4.2.8.1 OEM.
Go grab it here:
http://sudermatt.com/files/Optional_MMS_4281_10-29-07.zip
Simply unzip and drop it into the OEM folder....
Be aware...you'd better know your Carrier MMS Settings before attempting this one......
sudermatt said:
Be aware...you'd better know your Carrier MMS Settings before attempting this one......
Click to expand...
Click to collapse
actually, if youre using it with my kitchen, the carrier packages should do the mms configuration for you. I've not tested 4.2.8.1 (i dont have vzw) but I was told it worked right off the bat.
It didn't for me....I had to dig around for a posting that gave the right settings.
http://forum.ppcgeeks.com/showthread.php?t=10210
Of course....with OEMizer....I can easily create an rgu file with the settings built into the OEM I make and Cook in!
sudermatt said:
It didn't for me.
Click to expand...
Click to collapse
I will work on this. 3.0 and 4.2 must use different keys.
is there a cab for this version?
Here are some of the OEMs I use in my personal build...
Here is my mortscript OEM.
This binds the voice dialing key to a mortscript of mine for toggling the cellular data connection. Holding button 5 will connect if disconnected, or will disconnect (and disable) if connected. Script is included.
I use it to shut off cellular data at home, which is the only way ive found to make activesync use wifi for connecting back to mail2web.
Hi, how do you build an OEM, to insert in a rom? I would like to add aim 2.0 and a few other files
DCD, is there a OEM for HTC Home that you used to include in your custom versions? The one that has the today-settings panel?
idenkilla,
Believe me...it's not drag and drop...you have to dig in and get your geek on.
OEMizer is an app (search for it) that seems to help the process. I haven't really used it yet to turn cabs or other folder apps (those that do not require installation), into cookable OEM folders. It looks like it will work. I hope to have some time this weekend (its raining all weekend in LA) to play with it.
I will put up some sort of tutorial when I get it figured out. At least covering the simple stuff I understand.
I'm no programmer. I dabble. My big brained friends say, things like, "you know just enough to really 'f' things up" "you code works...unintelligable...but it seems to work".
Go into one of the OEM folders in the kitchen. Find one that is pretty simple that you have a good idea what the app is about. Look at the Option.xml file. Open the rgu file in notepad.
In OEMizer, do something really simple, like owner information, and build the OEM....look at it....you'll see what's going on....
What I don't really get is, the folder apps....I will have to tinker
sudermatt said:
It didn't for me....I had to dig around for a posting that gave the right settings.
http://forum.ppcgeeks.com/showthread.php?t=10210
Of course....with OEMizer....I can easily create an rgu file with the settings built into the OEM I make and Cook in!
Click to expand...
Click to collapse
Hmm, I couldn't get 4.2 to work on mine even using the settings for the 6700. I wonder what is different for you as compared to mine?
I can't remember all the steps I took....but here goes
The mms app only had one connection listed.
In the Registery, it was listed under some directory.
I remember seeing the registery directory "test" having the verizon settings...I modded those to match what the post said.
I copied "test" into the same directory as the default one.
Then I had to change a registry entry to show 2 connection settings in the application
Then I changed another registry entry to indicate which was the default connection I wanted to use.
Then I added a registry entry for my phone number.
Then I think it started working....
I cooked another ROM last night, so I have to redo all this stuff...I'll walk thru the steps again and repost.
But THIS time....I'm going to put it all down and use OEMizer so I don't ever have to do it again.
I'm really starting to see a LOT of value in that application....
working on integrating all my favs as oems into dcd's but I still have a way to go i suppose... keep getting the registry building errors.... blah
registry build error means you have non-unicode text in a reg file you edited somewhere. Make sure to open and save the file that causes the error with microsoft word, and save as, text, unicode encoding... That should eliminate those errors. a lot of text editor say they are saving as unicode, but don't stick strictly to the standard.
PackageCreater Rulez!
sudermatt said:
idenkilla,
Believe me...it's not drag and drop...you have to dig in and get your geek on.
OEMizer is an app (search for it) that seems to help the process.
Click to expand...
Click to collapse
Actually, there is an app out there which pretty much does make it drag and drop.
Search on this site for the phrase "packagecreator". It was originally written and posted in one of the other forums here (i think the last version was 5.4).
It will open a cab, and export it and all of it's keys into a neatly written OEM folder. It even has the ability to mass-rename files in an OEM to avoid name conflicts when cooking.
This little beauty has worked for me on well over 99% (I can't claim 100% because I'm sure there's something out there that didn't work) of the OEMs I've created.
I find the program to be almost as valauble as the kitchen itself.
Jim
dcd1182 said:
Here are some of the OEMs I use in my personal build...
Click to expand...
Click to collapse
dcd1182 Thanks for all the work on this I have question about the oems you posted. I just started to play with the kitchen and when I add the HTC_XButton2_0_30995 the BuildOS gives me this error.
The file 'temp\dump\testsearch.bmp' already exists.
After doing some research it looks like the file is in both the HTC_XButton and AdobeReader is it ok to just delete one of them and try to run the BuildOS again?
Thanks,
dolivas
dolivas said:
dcd1182 Thanks for all the work on this I have question about the oems you posted. I just started to play with the kitchen and when I add the HTC_XButton2_0_30995 the BuildOS gives me this error.
The file 'temp\dump\testsearch.bmp' already exists.
After doing some research it looks like the file is in both the HTC_XButton and AdobeReader is it ok to just delete one of them and try to run the BuildOS again?
Thanks,
dolivas
Click to expand...
Click to collapse
They are the same picture, it's fine to delete one, but this is a bug in buildos that should be fixed, it should prompt the user to keep existing, rename, or overwrite...
paynej said:
Actually, there is an app out there which pretty much does make it drag and drop.
Search on this site for the phrase "packagecreator". It was originally written and posted in one of the other forums here (i think the last version was 5.4).
It will open a cab, and export it and all of it's keys into a neatly written OEM folder. It even has the ability to mass-rename files in an OEM to avoid name conflicts when cooking.
This little beauty has worked for me on well over 99% (I can't claim 100% because I'm sure there's something out there that didn't work) of the OEMs I've created.
I find the program to be almost as valauble as the kitchen itself.
Jim
Click to expand...
Click to collapse
Package creator 5.4 works great, I've been using it for quite a while creating my OEM's. I use this combined with Mobile Registry Editor to extract stuff from the registry to put into the OEM so I don't have to keep setting stuff up every time I flash. For instance I have Slingplayer mobile in an OEM all configured and ready to go.
htc home 2.0.814.722
paynej said:
Actually, there is an app out there which pretty much does make it drag and drop.
Search on this site for the phrase "packagecreator". It was originally written and posted in one of the other forums here (i think the last version was 5.4).
It will open a cab, and export it and all of it's keys into a neatly written OEM folder. It even has the ability to mass-rename files in an OEM to avoid name conflicts when cooking.
This little beauty has worked for me on well over 99% (I can't claim 100% because I'm sure there's something out there that didn't work) of the OEMs I've created.
I find the program to be almost as valauble as the kitchen itself.
Jim
Click to expand...
Click to collapse
If your still looking for package creator heres a link. http://rs62.rapidshare.com/files/78803302/package_creator.rar
Not sure if this belongs here, if one disagrees, please notify admin and move.
Foreword:
I'm neither a chef nor a programmer but do have sometimes viable ideas since I consider myself an out of the box thinker. Please do not expect me to write, code program, cook, fry or whatever I propose here - for that we have great chefs - but maybe it's possible for them to create the UBERSENSE without too many headache.
Most like Sense 2.5 for overall functionality, look and feel but have a love hate relationship due to the missing program tab and some other limitations.
Maxycy showed us that there is more possible (up to 20 program tabs) and how he implemented it seems pretty smart (take a look at the reg), to me at least.
So after looking a little bit into the registry myself we have some items which could be added perhaps in a rather simple way to create a "Hybrid Manila".
Preconditions:
No program tab in slider.
Up to 20 program links through Max's extensions.
Ideas and possible solution paths (suggestions in green):
Sense 2.5 is missing the following key to show a program tab completely (0=on // 1 or 2 =off as in don't display)
HKCU/Software/Htc/Manila
Manila://programs.page.hidden
Adding it under 2.5 does nothing because other important items are missing.
Missing items as far as I could figure out:
\HKLM\Software\OEM\MASD
Which contains bits and piece for all tab items.
Possible to take the 2.1 app, extract, list it here and cook it in?
Under this section the corresponding HTC program name and version is listed. Should be the same under 2.1 so should be possible to extract.
HKLM\Software\HTC\Manila\Configuration
(current;y running from 0-12) Possible to add 13 or rearrange
Enable 0
ab - Pagename (should be Manila://programs.page.hidden)
Title IDS_PROGRAM (the IDS_.... could be "stolen" from Manila 2.1 and cooked in)
HKLM\Software\HTC\Manila\HTCService
Not sure if anything is needed here because the feature call for the program should happen under \HKLM\Software\OEM\MASD
Based on the above findings and idea one could perhaps extract the "Program Tab paths and items" from a Manila 2.1 and add it to a Manila 2.5. The biggest issue could be the IDS_.... since I recall some problems with display and local language files from the past.
Cheers
Tyguy
any news man
Perhaps you should move this thread to dev and hacking
Nope no PM or email on that subject *sigh*
I've been trying for the last couple of days to solve an issue (it's not really a problem) that has been irritating me for a while. The issue is that everytime i flash a new rom i have to spent a coupe of hours after configuring everything again. Now, I use the 6.5.x tree of NRGZ28's energy rom series, specifically the standard variant and i want to create some scripts that will automatically setup things like my exchange server, hotmail, opera user-agent string and wifi. I already have a script that is supposed to work for exchange (not tested it yet) and one for the wifi. The wifi one just doesn't work but i've just done some reading and i think i know why (More on that in a mo). So, i was wondering, has anyone tried this already? If so do you have the scripts that are needed or know where i can find them?
Now, back to the wifi script. The reason i believe it doesn't work is because it would appear that the wifi has to be on for the WLAN driver to accept the new configuration. Now when you install a new rom, as most of you will know, the wifi is turned off and those of you familiar with the energy rom series will know that xda_uc runs right after first boot allowing no time for the wifi to be enabled manually. So, i was thinking, is it possible to write some code that will enable the wifi at first boot so the configuration script will successfully modify the wifi configuration?
Thanks for your thoughts in advance guys and girls.
Have a look in the FAQ for the ROM and there is post for sample scripts. I used them last night and got hotmail and exchange working. Here's the link:
http://forum.xda-developers.com/showpost.php?p=7333558&postcount=19477
Check the FAQ - each time I re-read it I figure something else out.
lol and there was me thinking it would be a lot harder. i always skip past the faq because 9 times out of 10 they are always filled with things like "How do i flash a rom" etc but i do still have a feeling it's not going to cover all my questions, things like can i write some code to enable the wifi at first boot or some other things i haven't meantioned like can i write a script that will automatically configure omarket with my login details.
I want to go all out on this and have it set up so i have to do as little manual configuration as possible so some code samples and/or further pointer would be really handy.
Just had another look at the faq and found i already had the xml generator listed in the energy addons page. One small problem... I have no idea what the hotmail server configuration is. Any clues? if not i will google it later.
Got my hotmail script. No idea if it works, guess i'll have to test it at some point.
I'm still looking for info on how to enable the wifi at first boot. Although at this point i am open to suggestions on different methods that could be used.
I am also a little disappointed. i thought this one had more legs to it. oh well, you can't always get everything you want i guess.
Just a litlle update. I got the wifi to take the settings without turning it on. Well i say i did it when really it just seemed to work. i think it might have somethig to do with some new drivers that were cooked into the rom i use.
I dropped the hotmail script because i do actually use windows live fair often and i ended up with 2 hotmail email accounts in the email tab but with a couple of tweaks i did get my exchange settings script to work like a dream.
I'm now looking into setting the phone identity using a reg file. I gave it a go using a script i picked up but instead of doing what it was supposed to it just stopped the windows and HTC sms clients from working correctly and i can't figure out why (it caused the phone to create several undeleteable sms messages). I'll post the code at the bottom. I'm also wondering if it is possbile to have a script that will copy files (ringtones specifically) to the right location. I think XDA_UC will do this if you create the directory structure in a folder in the XDA_UC folder on the sd card (hope you followed that one). Can anyone confirm that? I also created a script to configure quickgps but that didn't seem to work, i'll post the code for that too.
I'm still wondering if it would be possible to configure the opera user agent string using some form of script or reg file and it would be really nice if i could something similar with BSB tweaks, agps, HTC location service and pretty much everything else tbh. So if anyone has any scripts, reg files or cab files they wanna share i will certainly welcome them and i'm sure that many others will too.
Anyway, to posting those reg files:
Code:
[HKEY_LOCAL_MACHINE\Ident]
"Name"="Lucifer"
"Desc"="HTC HD2"
"OrigName"="Lucifer"
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS]
"auto"=dword:00000001
"actSync"=dword:00000001
"ExpiredTime"=dword:00002760
"remind"=dword:00000001
Check this out for reference [XDA_UC][UC][SASHIMI][S4X] S4X_Auto & S4X_Backup [AUG.10.2010] XDA_UC Mods & Answers
id some looking up on the device name thing and found this: http://msdn.microsoft.com/en-us/library/aa924188.aspx seems my reg key was a little wrong.
I've also managed to create a cab file that will install my ringtones and then setthem with all related options as the defaults. I know it's not very impressive but it's a step in the right direction. I think i may have a look at exporting the bsb tweaks settings later and see how that goes.
Oh one question: i have been looking for an .reg to xml converter but my google results all seem a little vague and i don;t know if can trust the programs i'm finding. Has anyone got any suggestions?
M3PH said:
Oh one question: i have been looking for an .reg to xml converter but my google results all seem a little vague and i don;t know if can trust the programs i'm finding. Has anyone got any suggestions?
Click to expand...
Click to collapse
I don't think you need to convert reg to xml. Just leave the .reg files in the XDA_UC directory and it should run automatically.
darkblak said:
I don't think you need to convert reg to xml. Just leave the .reg files in the XDA_UC directory and it should run automatically.
Click to expand...
Click to collapse
No, you're right. I have no idea what i was thinking.
Another little update. I have working reg files for opera ua string and quickgps. I've decided not to bother with bsb tweaks because it's so easy to setup but being able to preconfigure windows live would be cool. Also being able to preconfigure agps would be nice