2.1 OTA Leak question - Droid Eris Q&A, Help & Troubleshooting

I tried searching for a how-to on this but apparently I'm searching inclined.
From what I can gather is it as simple as just dumping the zip onto the root of your SD card and doing:
3. Make sure phone is off then hold Power button and Call Button.
4. The menu opens quickly press the power key over the hboot option.
5. Follow onscreen instructions to install the update. the phone will reboot a few times.

you dont even need to search. go to the development section and then look at the top few, it will have very detailed instructions.

I guess I should have elaborated more and said I don't have my phone rooted and really don't want to go that route. I was just getting confused because everything i was finding on here was people running root but I came across a few things where people said the 2.1OTA Leak was just a straight upgrade, so that is my confusion.

Are you asking how to install the 2.1ota leak? Just flash it onto your phone?
Curious, why do you not want to root your phone?
Root is much more flexible, and there are roms that are based off that leak. If you're worried about your warranty, it's going to void it either way, lol.
Good luck !

rheally said:
Are you asking how to install the 2.1ota leak? Just flash it onto your phone?
Curious, why do you not want to root your phone?
Root is much more flexible, and there are roms that are based off that leak. If you're worried about your warranty, it's going to void it either way, lol.
Good luck !
Click to expand...
Click to collapse
but if you have root you can do the downgrade back to 1.5

Android22 said:
but if you have root you can do the downgrade back to 1.5
Click to expand...
Click to collapse
Oh right, I forgot about that, duh It just seems like root would be a better choice.
But to each his own.

rheally said:
Are you asking how to install the 2.1ota leak? Just flash it onto your phone?
Curious, why do you not want to root your phone?
Root is much more flexible, and there are roms that are based off that leak. If you're worried about your warranty, it's going to void it either way, lol.
Good luck !
Click to expand...
Click to collapse
yeah that is my question, can 2.1OTA just be flashed or does your phone need to be rooted?
I just feel like with root I'll be more likely to kill the phone but I'm going to check into it more again.

If you flash the 2.1 OTA leak onto your phone you CANNOT root your phone. It hasn't been figured out yet.
Root really isn't that hard to do. There are several threads over in the development forum.

rheally said:
If you flash the 2.1 OTA leak onto your phone you CANNOT root your phone. It hasn't been figured out yet.
Root really isn't that hard to do. There are several threads over in the development forum.
Click to expand...
Click to collapse
yeah I was just reading the thread on going from stock 1.5 to rooted 2.1. Can you give me some of the major benefits of rooting? I'm trying to find really practical stuff, not just the "Well it's cool cause it's like being root in Linux".
And just to clarify you can just flash to 2.1OTA? I'm skeptical of doing that now because I was reading some people think 2.1OTA has a time sensitive date on it.

Future developments will likely be easier to impliment if you root. The ability to run different (and potentially more stable) ROMs. Support for future software not designed for the Eris. Post rooting you can also make Nandroid backups and as long as you don't somehow screw your bootloader you can actually fix your phone.
Also, and this is pure speculation, should Verison decide to discontinue support for the Eris entirely, non-rooters may have issue getting new Android versions since they're limited to signed code.
EDIT: there is also little reason NOT to root. It does everything that you can do unrooted and more. All this plus the fact that you may never be able to root again but could always unroot at your leisure.

Marisa said:
Future developments will likely be easier to impliment if you root. The ability to run different (and potentially more stable) ROMs. Support for future software not designed for the Eris. Post rooting you can also make Nandroid backups and as long as you don't somehow screw your bootloader you can actually fix your phone.
Also, and this is pure speculation, should Verison decide to discontinue support for the Eris entirely, non-rooters may have issue getting new Android versions since they're limited to signed code.
EDIT: there is also little reason NOT to root. It does everything that you can do unrooted and more. All this plus the fact that you may never be able to root again but could always unroot at your leisure.
Click to expand...
Click to collapse
Can you point me to a good nandroid tutorial? tried searching for one but if you know of a good one I'd appreciate it.

I was trying to find a nandroid guide when I did it the first time, but once I discovered that Amon_RA's recovery has it built-in, I decided to wing it and see what happened. It was a lot easier than I expected to be honest.
Reboot your phone into recovery (VOL UP + Power), you should have a short list of options, one of which should be Backup/Restore. Trackball into it and select to make a backup. Let it do it's thing, should take a few minutes. Congratulations, you've made a backup of your phone. You can make as many as you like, they're given names based on the date and time they're created, but you can rename without harm (barring a few characters keep it A-Z a-z 0-9 and you should be good)
Restoring to that backup is as easy as entering the same menu but picking restore instead. You need to have made a backup first in order to restore something.
NOTE: I've written all this by memory, and while it should be fairly accurate, I can't turn my phone off currently to double check that the wording is all correct.

I'm a bit confused on the Amon thing. I found the the link here http://forum.xda-developers.com/showthread.php?t=648025
Do I just dump that IMG file onto the root of my SD card and that's it? Will it know to always use his recovery or do I need to do more?

I have an application that I write to make going from 1.5 to root a lot easier with a gui application. It will be released very soon for everyone to use. Take a look at my thread for more info. Link is at the top of my signature.
Sent from my Eris using the XDA mobile application powered by Tapatalk

frankspin said:
I'm a bit confused on the Amon thing. I found the the link here http://forum.xda-developers.com/showthread.php?t=648025
Do I just dump that IMG file onto the root of my SD card and that's it? Will it know to always use his recovery or do I need to do more?
Click to expand...
Click to collapse
If you followed Ivan's guide to the very end, you already flashed Amon_RA's recovery to your phone. To enter it, shutdown your phone and then hold volume up and the call end button (power), you should boot into the recovery.

Marisa said:
If you followed Ivan's guide to the very end, you already flashed Amon_RA's recovery to your phone. To enter it, shutdown your phone and then hold volume up and the call end button (power), you should boot into the recovery.
Click to expand...
Click to collapse
AWESOME! Thank you I am doing it right now.

NM: got it

Well I got 2.1 on but I did something wrong and can't load rooted 2.1. I get "signature verification failed" message when I load the zip file.

Related

Accept T-Mobile Update?

My Vibrant is telling me that T-Mobile has kindly sent me an update. I think it must be the GPS fix. It is rather persistent in that it won't let me choose when to install it. It will only allow me to delay for at most a day. This is quite annoying as I am preparing for a trip and really don't want to mess around with my phone right now.
I am running Vibrant9. Do I want to install this update? Is it gonna break anything? Thanks!
JJMT said:
My Vibrant is telling me that T-Mobile has kindly sent me an update. I think it must be the GPS fix. It is rather persistent in that it won't let me choose when to install it. It will only allow me to delay for at most a day. This is quite annoying as I am preparing for a trip and really don't want to mess around with my phone right now.
I am running Vibrant9. Do I want to install this update? Is it gonna break anything? Thanks!
Click to expand...
Click to collapse
Shouldn't break anything. Most are still waiting for the update. Personally I was impatient and flashed it through ODIN last night.
OK. I accepted the update. Phone is now stuck on "Vibrant" at reboot. Sigh. Proceeding to trying to restore ROM.
JJMT said:
OK. I accepted the update. Phone is now stuck on "Vibrant" at reboot. Sigh. Proceeding to trying to restore ROM.
Click to expand...
Click to collapse
Go to the Development section that are a few threads about this. I looks like anyone with a lag fix, or GPS fix (from JI2) where having this issue, plus I have seen stock people having it too.
Or you can go read my blog post here. the post tells the steps I took to get back the JFD, but you could flash JI6 instead.
you will need to flash JI6 with ODIN to restore, you can not just do a nandroid restore, it is an issue with the kernel and nandroid does not restore/backup the kernel.
*facepalm*@Samsung
http://forum.xda-developers.com/showthread.php?t=803492
Anderdroid said:
*facepalm*@Samsung
Click to expand...
Click to collapse
It's not Samsung or T-Mobile.. its that the OP performed tweaks so the ROM wasn't a 100.00% version of Stock. Tweaks including lag fixes, GPS fix, etc can cause this.
Personally, I don't know why if you're performing tweaks on your phone and are on a stock ROM. If you're going to tweak your phone, go the full way and tweak everything.
This is why t-mobile had the G2 nand locked..... so this type of user error won't cost them millions, replacing phones that the user messed up with blind stupidity.... that's only for the ones under warranty, you can still call in a lost phone and get replacements..
dan0zone said:
This is why t-mobile had the G2 nand locked..... so this type of user error won't cost them millions, replacing phones that the user messed up with blind stupidity.... that's only for the ones under warranty, you can still call in a lost phone and get replacements..
Click to expand...
Click to collapse
So now instead, they get flooded with returns because the phone isn't what people expected.
zephiK said:
It's not Samsung or T-Mobile.. its that the OP performed tweaks so the ROM wasn't a 100.00% version of Stock. Tweaks including lag fixes, GPS fix, etc can cause this.
Personally, I don't know why if you're performing tweaks on your phone and are on a stock ROM. If you're going to tweak your phone, go the full way and tweak everything.
Click to expand...
Click to collapse
That's not true, it is Samsung/T-Mobile fault. I know 3 people with 100% stock, unrooted, vibrants, 2 of them got stuck when they updated. the t-mobile forums filled with stock users with their phone stuck at the vibrant screen as well.
camalot said:
That's not true, it is Samsung/T-Mobile fault. I know 3 people with 100% stock, unrooted, vibrants, 2 of them got stuck when they updated. the t-mobile forums filled with stock users with their phone stuck at the vibrant screen as well.
Click to expand...
Click to collapse
And what are the chances of this?
Everybody lies.. especially when they're desperate and unwilling to accept the fact that they modified their phone. I don't see any reason why they wouldn't lie to T-Mobile and say that they didn't modify their phones if its "bricked." Because it is not bricked, all it takes is download mode and Odin. There are threads out there that break down on how to use Odin, it's not that difficult to do.
This is why I don't endorse "One Click" anything unless it is a long process. Sure, it makes everything easier but it makes people not think about what they're doing before they do it. Before one clicking, rooting was so simple, put something on your internal sd and boot into recovery and hit reinstall packages. If something like that is too difficult then they shouldn't be doing any modifications in the first place unless they understanding what they're doing.
The T-Mobile forum is not a valid source because there is no concrete proof that they didn't root their phone and modified something. Even rooting and removing bloatware then removing access to root would cause this.
Edit: Looking at the OP's recent posts.. he did indeed run a custom ROM but has possibly did some tweaking after reverting back to stock?
zephiK said:
And what are the chances of this?
Everybody lies.. especially when they're desperate and unwilling to accept the fact that they modified their phone. I don't see any reason why they wouldn't lie to T-Mobile and say that they didn't modify their phones if its "bricked." Because it is not bricked, all it takes is download mode and Odin. There are threads out there that break down on how to use Odin, it's not that difficult to do.
This is why I don't endorse "One Click" anything unless it is a long process. Sure, it makes everything easier but it makes people not think about what they're doing before they do it. Before one clicking, rooting was so simple, put something on your internal sd and boot into recovery and hit reinstall packages. If something like that is too difficult then they shouldn't be doing any modifications in the first place unless they understanding what they're doing.
The T-Mobile forum is not a valid source because there is no concrete proof that they didn't root their phone and modified something. Even rooting and removing bloatware then removing access to root would cause this.
Edit: Looking at the OP's recent posts.. he did indeed run a custom ROM but has possibly did some tweaking after reverting back to stock?
Click to expand...
Click to collapse
Well, I know the 2 people that updated stock and got stuck at the vibrant screen were 100% stock because they both called me on what they need to do. one came over and I fixed it with ODIN back to stock (JI6) and the other just said he'd call TMO and get a replacement. they dont even know what rooting is, or that there is a site like that that they can get files to do "one click root"
OK. I'm the OP and I'm back. I was traveling today (with a phone flashed back to stock - that's as far as I got before getting kicked out of the hotel). I've now got the ROM restored and I'm where I was before trying to install the update.
My question is this (probably simple): my phone still wants to do the update. How do I make it go away? I can't install it, and I don't want to have to postpone it every day. Is there a cache I can clear or something?
You could just update it through Odin. I'm on stock with root and JAC's oc/uv kernel and the OTA failed but Odin worked perfectly.
Yes, I will try to flash it with odin when I have the time and interest, but for now I have neither, and I just want the phone to stop bugging me. Ideas?
JJMT said:
Yes, I will try to flash it with odin when I have the time and interest, but for now I have neither, and I just want the phone to stop bugging me. Ideas?
Click to expand...
Click to collapse
It will only stop once you are on JI6
camalot said:
It will only stop once you are on JI6
Click to expand...
Click to collapse
OK. I guess I will have to try to push the update through odin. Can someone point me to a link to the files?
I'm kind of irritated by this whole thing. I'm pleased with tmo for pushing the update out, but I mean, really, even Windows allows you to decline to install an update.
http://forum.xda-developers.com/showthread.php?t=798125
chad658eku said:
http://forum.xda-developers.com/showthread.php?t=798125
Click to expand...
Click to collapse
Thanks for the link. It really looks to me that I'm going to need to flash to a stock ROM before flashing JI6. That, as they say, is a bummer.
As I am actually quite content at the moment with Vibrant9, it really seems to me that it would be easier to somehow remove whatever it is on my phone that is requesting that I update. Presumably there is an update.zip file sitting somewhere, that will be copied into sdcard before the updater involves reboot recovery. Any ideas where to look?
I would really rather not do any further flashing until is an official Froyo to flash to.
JWhipple said:
So now instead, they get flooded with returns because the phone isn't what people expected.
Click to expand...
Click to collapse
Flooded with returns by morons who think they are smart.

[Q] unroot for OTA???

I've rooted my GT 10.1 but I have two questions that I can't find the answer.
1. Has anyone discovered how to unroot back to stock?
2. If rooted, will I be able to get the OTA of touchwiz by checking for updates under settings?
PS I flashed the TouchWiz UX found in this forum. Got to say it is really nice and I can't wait to get the version from Sammy. I then restored a backup using Rom Manager and restored fine except when checking for software updates. It used to say no update available, but today it says failed to connect to servers. Anyone else getting this error?
I guess that is actually 3 questions.
Thanks
1. Unrooting is pretty simple. Just flash the 3.1 OTA in the dev forum, after doing a full wipe. If you feel the need to go back to full stock, you'll also want to nvflash back to the original retail recovery, which you undoubtedly saved when you first rooted.
2. No one knows yet, but rest assured, within a day (less probably) of the update being released, it'll be available here as a rooted flashable ROM. If you learn one thing from your time on XDA, it should be "never accept an OTA update." Let the devs pull it apart and repackage it in a nice root-safe download.
Undoubtedly! (I wish) I wasn't planning to root but while playing with Odin, I thought I was locked at the downloading screen while testing odin. (Didn't hold down the power button long enough to shut off tab) I thought my only solution was to continue and root. No problems rooting, it was easy. I just wanted to make sure I get the TouchWiz update. Now I learned my lesson I will never do an OTA update.
Glad you told me that, otherwise I probably would have screwed up my GT. I don't know how I missed the post about backing up the stock image first. I try to read a lot of posts (heck I even use the search box) before trying something new. Anyway, I'm sure it is posted in the forums somewhere if I need to find it.
Thanks!
pmsrefugee said:
Glad you told me that, otherwise I probably would have screwed up my GT.
Click to expand...
Click to collapse
It's not so much that you'll screw up your device by accepting an OTA, but rather that you might lose root and/or your custom recovery (perhaps permanently). Nevertheless, there are some cases of OTAs screwing up devices when accepted over non-stock installs, so IMHO its always best to wait for a flashable ROM.
pmsrefugee said:
I don't know how I missed the post about backing up the stock image first. I try to read a lot of posts (heck I even use the search box) before trying something new. Anyway, I'm sure it is posted in the forums somewhere if I need to find it.
Thanks!
Click to expand...
Click to collapse
Yes, I believe the stock retail recovery is posted in the CWM recovery download package here: http://forum.xda-developers.com/showthread.php?t=1130574. You'll note that Step 3 is where you were advised to backup your original stock recovery, although the step is (correctly) noted as optional. No big deal, in any event. Glad I could help.

[Q] How can I Factory Restore?

I have an unrooted HTC Aria (AT&T) that i upgraded to Froyo a couple of weeks ago. I have been using it for a while and i don't like the performance with the new upgrade, it used to be a LOT snappier before.
I would like to know if its possible to revert the phone to Factory Defaults (Eclair 2.1) and where i can get the ROM since HTC is no longer providing it in its website.
I'm not interested in rooting my phone nor custom roms i just want it the way it was at the moment I took it off the box and turned it on for the first time.
If the downgrade is possible I would really appreciate if someone could provide a list of steps to follow to make it happen.
Thanks in advance.
Check out this thread: http://forum.xda-developers.com/showthread.php?t=971119. You can but you will still have the updated HBOOT (Bootloader). You will have to use the ROM linked in post 3 (Original 2.1 Rom)
P.S - Search before starting new threads on the same topic.
http://www.mediafire.com/?cj56c2gfk86k8oe
This is the original ship ROM. I downloaded this back when I first got my phone (first day the Aria was released) and have kept it for future use. This was even before they added the ability to receive OTA updates, so you won't even have to worry about being notified about the 2.2.2 OTA update.
Now, you should be able to just run this and have it downgrade everything (except HBOOT, but that isn't a problem unless you want to root). I haven't actually done it before but it should work.
If it doesn't work, there is another way that will definitely work, but I'll explain that if the need arises. Let me know if you run into any problems.
Theonew said:
Nope. Not possible since you don't want to root your device.
Click to expand...
Click to collapse
It is possible. You can downgrade everything except the HBOOT. (Meaning, he will have the original ROM like he wants but be unable to use Unrevoked, which he doesn't care about.)
drumist said:
It is possible. You can downgrade everything except the HBOOT. (Meaning, he will have the original ROM like he wants but be unable to use Unrevoked, which he doesn't care about.)
Click to expand...
Click to collapse
That post I made was a mistake. That's why I edited it. Sorry I didn't get to change it in time.
Theonew said:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=971119. You can but you will still have the updated HBOOT (Bootloader). You will have to use the ROM linked in post 3 (Original 2.1 Rom)
P.S - Search before starting new threads on the same topic.
Click to expand...
Click to collapse
To be honest the advice from those threads is not really very good anyway. You don't need temp root on your device. There are easier methods that ought to work fine. Namely, just putting the 2.1 RUU zip as LIBEIMG.zip on your SD card. But from what I've read, even just running the RUU should be enough.
(Nevermind, this doesn't work.)
Thanks for you advice, in fact did some research before creating the thread, but all the threads i found were about people who wanted to downgrade to get the root back, so they were either redirected to other threads or were given a lot information not relevant to what i really need.
drumist said:
This is the original ship ROM. I downloaded this back when I first got my phone (first day the Aria was released) and have kept it for future use. This was even before they added the ability to receive OTA updates, so you won't even have to worry about being notified about the 2.2.2 OTA update.
Now, you should be able to just run this and have it downgrade everything (except HBOOT, but that isn't a problem unless you want to root). I haven't actually done it before but it should work.
If it doesn't work, there is another way that will definitely work, but I'll explain that if the need arises. Let me know if you run into any problems.
Click to expand...
Click to collapse
I tried this but for some reason i got a BOOTLOADER VERSION ERROR [140] message. Thanks for your help anyway.
eljuanpelos said:
I tried this but for some reason i got a BOOTLOADER VERSION ERROR [140] message. Thanks for your help anyway.
Click to expand...
Click to collapse
Don't give up yet. This next method should work if that one didn't.
Download this file: http://www.mediafire.com/?ct1ay7t93d8g742
Rename the zip file as LIBEIMG.zip (don't extract it) then place it on your SD card (not in a subfolder).
Then turn the phone completely off, and press VOL DOWN + power to turn the phone back on. It should detect the file after a couple seconds and start flashing it automatically. At this point just be patient for a minute or two, then press VOL UP key to start the update process when it asks you to. After that, be patient while it does everything. It takes about 5 minutes to finish installing everything and will reboot once during the process. After it's done (it will tell you when it's done), the phone will reboot and there will be a scary looking screen but JUST WAIT about 10 seconds and it will boot normally. Then you're good to go.
After you're done with this, make sure to DELETE the LIBEIMG.zip file from your SD card. Otherwise it will ask you every time you go into HBOOT if you want to apply the update.
Good luck.
drumist said:
Don't give up yet. This next method should work if that one didn't.
Download this file:
Rename the zip file as LIBEIMG.zip (don't extract it) then place it on your SD card (not in a subfolder).
Then turn the phone completely off, and press VOL DOWN + power to turn the phone back on. It should detect the file after a couple seconds and start flashing it automatically. At this point just be patient for a minute or two, then press VOL UP key to start the update process when it asks you to. After that, be patient while it does everything. It takes about 5 minutes to finish installing everything and will reboot once during the process. After it's done (it will tell you when it's done), the phone will reboot and there will be a scary looking screen but JUST WAIT about 10 seconds and it will boot normally. Then you're good to go.
After you're done with this, make sure to DELETE the LIBEIMG.zip file from your SD card. Otherwise it will ask you every time you go into HBOOT if you want to apply the update.
Good luck.
Click to expand...
Click to collapse
Unfortunately this method doesn't work either, it throws an error that says "Main Version is older, Update Fail!"
I could have sworn I've read about this working before. I would have tested it first myself but I don't have a phone that isn't S-OFF. Sorry for making you jump through hoops.
You could try the methods in the other threads linked above. I guess you do need temp root to do a downgrade.
Alternatively, you could use AlphaRevX to S-OFF, install Clockwork, and install the factory original, unrooted ROM. The downside of this is that it requires voiding your warranty if you have one.
Easiest way would be to run the official 2.2 RUU update from HTC. 100% stock.
Sent from my Liberty
Optic2 said:
Easiest way would be to run the official 2.2 RUU update from HTC. 100% stock.
Sent from my Liberty
Click to expand...
Click to collapse
He wants to return to android 2.1 so that wouldn't help whatsoever. Plus he already did that which is why he wants to downgrade.
Oh my bad, I didn't read the whole thread. Hmm why do you want to downgrade to 2.1?
Sent from my Liberty
Optic2 said:
Hmm why do you want to downgrade to 2.1?
Sent from my Liberty
Click to expand...
Click to collapse
This is the reason which he said in his post:"I don't like the performance with the new upgrade, it used to be a LOT snappier before."
drumist said:
This is the original ship ROM. I downloaded this back when I first got my phone (first day the Aria was released) and have kept it for future use. This was even before they added the ability to receive OTA updates, so you won't even have to worry about being notified about the 2.2.2 OTA update.
Now, you should be able to just run this and have it downgrade everything (except HBOOT, but that isn't a problem unless you want to root). I haven't actually done it before but it should work.
If it doesn't work, there is another way that will definitely work, but I'll explain that if the need arises. Let me know if you run into any problems.
Click to expand...
Click to collapse
One question... I have HTC Gratia, which is operator free, so can I restore your original (backuped) ROM on my phone and update it, so I can use it just like original one?

[S-OFF Only!!!] Install OTA Update and Maintain Root Access

UPDATE: The latest update still is safe. I just installed it and I am still s-off.
UPDATE: The update to Jellybean does not write the secure flag and this method is safe to apply the OTA update with this method and still maintain root access afterwards.
First and foremost, a couple disclaimers.
FIRST, YOU MUST BE S-OFF FOR THIS TO WORK. PLEASE DO NOT TRY THIS IF YOU ARE NOT ALREADY S-OFF.
SECOND, FOR THE OTA UPDATE 1.22.651.3 YOU WILL FOR SURE RETAIN S-OFF. ALTHOUGH HIGHLY UNLIKELY, HTC COULD POTENTIALLY MAKE YOU S-ON IN FUTURE OTA UPDATES. SEE HERE FOR MORE INFORMATION.
To obtain s-off please see this thread: http://unlimited.io/jewel.htm
Once you are s-off you can install the OTA update no problem and still retain root. I understand that there are rooted ROMs that come out within a day or whatever, I find this method just easier and less annoying that waiting for a rooted stock ROM to come out. I don't really theme, mod, or do crazy things with my phone but still want root access. So, I decided since I was s-off, I would give this method a whirl. I am happy to report that I am s-off, with TWRP, fully rooted, and with installing the OTA update. I had a little hiccup but was able to solve that.
So, here is the process. This is kind of a hodge podge of different threads, ideas, devices, and versions of android so if I didn't give you credit, please let me know and I will put you in this thread.
Process for installing a stock recovery. I have already created some stock recovery files so see at the bottom of this post for the zip file that includes the stock recovery. If you wish to use these files, just start with step #10.
IF YOU CHOOSE TO JUST DOWNLOAD THE STOCK RECOVERY AT THE BOTTOM OF THIS POST, SKIP TO STEP #10.
Creating Stock Recovery File Manually
1. Install a stock recovery if you don't already have one.
2. To do so, get the RUU for the version you are running.
3. Run the RUU (don't connect to your phone at all)
4. Navigate to your temp directory on your computer (on windows 7 it is C:\Users\your_user_name\AppData\Local\Temp)
5. Find a folder that looks like it is in the following format "{XXXXXX-XXXX-XXXX-XXXX-XXXXXXXX}" It might help to sort by date modified. The folder should have the current date
6. Inside the folder might be a couple other folders. Navigate through the folder to find a zip that says "firmware" or "rom" (mine said rom)
7. Extract the content to a folder in the same directory called rom
8. Navigate into the rom folder and find two files android-info.txt and recovery_signed.img. Copy those to a directory of your choice.
9. Send those files to a zip folder and name the file "PJ75IMG.zip" without the quotes. Make sure zip is only listed once. If you have file extensions hidden in windows yours will only say "PJ75IMG".
Installing the stock recovery, OTA, and regaining root
10. Place the stock recovery file on the root of your sd card
11. On your phone, head into settings and power and make sure the fastboot option is unchecked
12. Power down phone
13. Once phone is completely shut down, hold the volume down button and press the power on button while keeping the volume down button pressed.
14. It will boot into your hboot (verify it says s-off at the top or don't proceed) and find the file you placed on your sd card and ask you if you want to update. click volume up for yes. Reboot once finished. After your phone boots up, navigate to the root of your sdcard and delete PJ75IMG.zip
15. Go to settings>check for updates and check to see if there is an update. Download the update. Once it verifies, click install now. It should install just fine.
16. Once you are up and running, download one of the dirty racun hboots. I used hboot 2.09 img found here. Follow the instructions on the unlimited.io website how to flash the hboot by using fastboot (flashing the zip doesn't seem to be working.
update. click volume up for yes. Reboot once finished. After your phone boots up, navigate to the root of your sdcard and delete PJ75IMG.zip
17. Make sure usb debugging is checked under settings>developer options
18. Go download a su zip file. I used this one here and place it on the root of your sd card.
19. Go grab a custom recovery flashable zip (could not find the latest twrp zip) or img (I used TWRP found here. Take the image and place it in your platform tools folder for ADB.
20. Plug in phone while powered on and type in adb devices to make sure you are connected.
21. If you see a device type in
Code:
adb reboot bootloader
22. Your device will boot into your bootloader and you will see fastboot usb (make sure usb debugging was checked if you don't see that).
23. Then type fastboot flash recovery [filename] of the recovery img you downloaded. Once flashed, toggle with the volume up buttons to bootloader and then select recovery. This should boot you into TWRP
24. Once in recovery, install the su zip you downloaded in step 18.
25. Reboot and Enjoy!!!!
You are now rooted with the most current OTA update and all the goodies (radios, PRI, etc.)
This process should hopefully hold true for any future OTA updates if you are S-OFF. The only thing you will have to find is the current RUU to create the stock recovery. If this helped, feel free to thank! Go XDA!
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Rxpert said:
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I don't know. So you don't have to wait at all? Or for the people that aren't accustomed to flashing ROMs or don't care to. I prefer this method for whatever reason and it seems just easier. Personal preference though. The beauty of android and their strong developer network is that it gives the users choices. I can take the OTA update as soon as it comes out and don't have to worry about waiting for anything. Just another method I guess.
TLR there are already rooted stock roms in one of the dev forums. Flash it and flash the update firmware via bootloader and you're done.
Sent from my htc_jewel using Tapatalk
msimindlessmsi2 said:
TLR there are already rooted stock roms in one of the dev forums. Flash it and flash the update firmware via bootloader and you're done.
Sent from my htc_jewel using Tapatalk
Click to expand...
Click to collapse
The update firmware is the part that hangs me up. I believe when it was back in the original EVO days that some people were having problems updating their PRI version and it screwed up some things with wimax. That is when I decided I would just accept the OTA to get everything they included in the update and then gain root access through this method.
Again, to each their own. Please try not to clutter up the thread with off topic items. Thanks.
Because all of the ROM flash threads state you have to do a factory reset. Even with Titanium, I don't have the time to reset everything back up the way I want it... including all the folders I've created, etc. If you could flash a ROM and maintain all your data intact, I might consider it. Perhaps there's something I'm unaware of.
Rxpert said:
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
im coming from the rezound, i just want the updated firmware! on my rez being s-off i could run ANY firmware ICS, or GB and then go back to whatever rom i was running. im wondering if im s-off, i should b able to do the same thing right.
greyopaque said:
Because all of the ROM flash threads state you have to do a factory reset. Even with Titanium, I don't have the time to reset everything back up the way I want it... including all the folders I've created, etc. If you could flash a ROM and maintain all your data intact, I might consider it. Perhaps there's something I'm unaware of.
Click to expand...
Click to collapse
The devs state that so that they don't have to spend their valuable time troubleshooting because you didn't flash right. Its always best to do a full wipe, but not always required when flashing an updated version of the same ROM.
1) Nandroid.
2)Wipe Dalvik cache & cache
3) Flash
You retain all data.
If you have issues, then you nand restore and do a full wipe before bugging the devs
bpdamas said:
Once you are s-off you can install the OTA update no problem and still retain root. I understand that there are rooted ROMs that come out within a day or whatever, I find this method just easier and less annoying that waiting for a rooted stock ROM to come out.
Click to expand...
Click to collapse
Lmao! You find that whole process "easier" than waiting for a day? I think it might take the better part of a day to do all that.
Sent from my EVO using xda premium
Thanks for taking the time to do a write-up OP!
Good tutorial. I actually waited but this definitely a decent tutorial. Don't listen to anyone saying that it is dumb not to wait. Why do they care what you do with your device?
Sent from my EVO using Tapatalk 2
Actually, TWRP has a PJ75IMG.zip on their site that can be flashed the same way as the HBOOT. And then, you can flash Superuser from TWRP.
I did everything from my SD card. And, in response to the person saying it would take the better part of the day... the whole thing took me barely 10 minutes, and I have a completely updated phone, all the firmware, radios, etc. And all my data and settings are intact. I think that for someone like me that likes everything stock, but rooted (for WiFi Tether and Adblock), this is the best way to go.
greyopaque said:
Because all of the ROM flash threads state you have to do a factory reset. Even with Titanium, I don't have the time to reset everything back up the way I want it... including all the folders I've created, etc. If you could flash a ROM and maintain all your data intact, I might consider it. Perhaps there's something I'm unaware of.
Click to expand...
Click to collapse
Agreed.
EPayne123 said:
Good tutorial. I actually waited but this definitely a decent tutorial. Don't listen to anyone saying that it is dumb not to wait. Why do they care what you do with your device?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Definitely agreed.
greyopaque said:
Actually, TWRP has a PJ75IMG.zip on their site that can be flashed the same way as the HBOOT. And then, you can flash Superuser from TWRP.
I did everything from my SD card. And, in response to the person saying it would take the better part of the day... the whole thing took me barely 10 minutes, and I have a completely updated phone, all the firmware, radios, etc. And all my data and settings are intact. I think that for someone like me that likes everything stock, but rooted (for WiFi Tether and Adblock), this is the best way to go.
Click to expand...
Click to collapse
I know. This is exactly why I root and I can't believe there are so many people against this method. It seems very simple to me and I can have a stock recovery waiting to flash as soon as an OTA update comes out. Oh well.
Thanks for this info. I think I'm like you and not only like the stock experience and its benefits but also prefer diy when possible.
Of course I never seem to stay stock like you but I like doing the steps my self. To each their own is the beauty of android.
Go android!
Sent from my EVO
i just noticed my internal was wiped for some odd reason? im attempting to run the previous ruu, to get my notification sounds and everything back.
Rxpert said:
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
One advantage to me would be you're getting the official ROM/update, and you don't have to worry about a malicious dev slipping in some malware.
zounduser said:
i just noticed my internal was wiped for some odd reason? im attempting to run the previous ruu, to get my notification sounds and everything back.
Click to expand...
Click to collapse
Very curious on this. Nothing in this method should affect this.
Robbie_G said:
One advantage to me would be you're getting the official ROM/update, and you don't have to worry about a malicious dev slipping in some malware.
Click to expand...
Click to collapse
..... I'm blown away by this.
Really?
Why do you even have S-off then? That required you down download specific drivers, and run a program as an administrator on your computer. If you're concerned about a rogue dev they would've royally screwed you there.
/Tin Hat
Rxpert said:
..... I'm blown away by this.
Really?
Why do you even have S-off then? That required you down download specific drivers, and run a program as an administrator on your computer. If you're concerned about a rogue dev they would've royally screwed you there.
/Tin Hat
Click to expand...
Click to collapse
That's fair, rooting and s-off could also inject malicious code. But so can ROM makers.
I think there's a difference between trying to be safe and being paranoid. If there is a way for someone to make money off of you/steal your identity, eventually they will try. I'm not suspicious of any of the current devs, but it's something we should maybe be more aware of. Look at all the warez Windows out there with malware built in to steal your information.
EPayne123 said:
Good tutorial. I actually waited but this definitely a decent tutorial. Don't listen to anyone saying that it is dumb not to wait. Why do they care what you do with your device?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Totally agree. Its a good thing to learn in my opinion. I broke my Evo 4G, fixed it then rerooted it. Now on the 4G LTE got it rooted with custom rom. Love learning new things plus some of the good things that come with rooting and custom roms are worth it for me.

lg l9 p769 - droid 4.0.4 - i'm lost, could use help, linux user

i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/

Categories

Resources