Searching through the Internet for the possible solution regarding "Wake Up from Standby" problem i came across this Article.
The suggested solution for users facing this problem was to deselect the "Auto Adjust Backlight" option from the Power settings menu.
The suggested solution for Kitchen Chefs was to use another Power Application in their Kitchen.
I think that this could be useful for all of us.
for the wake issue, try this it should work :
1) take the flesh.bin, the ACER_EUU and the extrom.bin, from arto's rom,
2) then take the original acer 3.003c and extract the .exe file in a folder with winrar or sevenzip
3) dump the .amf file from it with the toolbyamper
4) now delete from the original acer rom those files: flesh.bin, extrom.bin, ACER_EUU, toolbyamper and the .amf file
5) put the flesh.bin, extrom and ACER_EUU that you take from arto's rom and put it in the acer v3 folder...
here you go !
jeje too complicated this last solution...
i tried solution mentioned by brianmaster and it works...
regrats
How to make what the device with SRS WOW HD 1.5.1.0 woke up?
How it has made Arto in the rom?
I wish to instal RU rom, but srs hd wow only on Arto rom works without a dream!
Sorry my bad English
You must uninstall SRS WOW HD 1.5.1.0, this driver is only for HTC
So on Arto rom works srs wow hd! Also does not sleep!
I even took srs wow hd from Arto rom, all the same on others rom does not work!
SRS WOW HD works only on Sense ROMs like Arto's.
right now use Arto rom, but it would be desirable to put RU rom and to fasten srs wow hd, but ways I so understand was not present (
Wake up solution?
brainmaster said:
Searching through the Internet for the possible solution regarding "Wake Up from Standby" problem i came across this Article.
The suggested solution for users facing this problem was to deselect the "Auto Adjust Backlight" option from the Power settings menu.
The suggested solution for Kitchen Chefs was to use another Power Application in their Kitchen.
I think that this could be useful for all of us.
Click to expand...
Click to collapse
I think that the wake up issue is caused by a conflict between windows and acer relating to the < End Key > fuction.
I've tried this for a day and it works for me:
Of corse uncheck < Auto adjust backlight by battery level>!
preferences-phone-check wake up from sleep
preferences-End Key-choose lock and suspend( hold to suspend)
Settings-System-backlight-battery tab-check both boxes
Settings-System-backlight-external power tab-check both boxes
Settings-personal-buttons-button 2 choose <Today >from menu on the bootom
TO WAKE UP PHONE: PRESS ( < ) button at bottom of device.
This W\Official acer ROM( don't know about settings in cooked ROM)
Also:< SRS-WOW HD> works beatifully on stock Rom
1.Installed SDK certs., .net config.3.5 Then:
2.Install SRS-WOW HD to device ( afer installation finishes *SOFT RESET*)
3.after reset go to settings-Sys-srs wow icon open and make personal adjustments.
Hoping this works for all!
arghh !! I'm still having wake up issue either I'm using v3 flashing tools...damm !!! I have this !
I've went back to Arto's ROM wich hasn't got the wake up issue. But when i used active sync it did again. I disabeld the active sync and then I was perfect again.
So maybe active sync has something to do with it to?
****inglogins said:
I've went back to Arto's ROM wich hasn't got the wake up issue. But when i used active sync it did again. I disabeld the active sync and then I was perfect again.
So maybe active sync has something to do with it to?
Click to expand...
Click to collapse
Did you had some issues with my Modular ROM? If you share it with me, maybe i can make improvements.
Yes, I've treid your modules Rom and really loved it. Unfortunatly I had the wake up issue (i reported it in your tread and you also fixed me a cab for dutch language realley fast
In arto's ROM I don't have the problem unless active sync is on push (or other polling, haven 't tried) no mather wat setting I use for backlight or wake up when a hardkey is pressed.
I think you have to contact Arto because he problely has the solution (since his Roms don't have it......
****inglogins said:
Yes, I've treid your modules Rom and really loved it. Unfortunatly I had the wake up issue (i reported it in your tread and you also fixed me a cab for dutch language realley fast
In arto's ROM I don't have the problem unless active sync is on push (or other polling, haven 't tried) no mather wat setting I use for backlight or wake up when a hardkey is pressed.
I think you have to contact Arto because he problely has the solution (since his Roms don't have it......
Click to expand...
Click to collapse
Well, i am using the Geek Rom since i cooked it, and don´t have any wake up issues.
That is strange then...... Maybe I'll flash your rom again sometime but i'm pretty satisfied with arto's rom so far.
I'll let you know by time
****inglogins said:
That is strange then...... Maybe I'll flash your rom again sometime but i'm pretty satisfied with arto's rom so far.
I'll let you know by time
Click to expand...
Click to collapse
No problem. Arto also makes very good ROMs.
3.003 drivers were supposed to fix the wakeup problem, but it seems there are certain options/customizations that still can create the wakeup problem.
For example, I have had wake up issues on all the ROMs I've tried (Rafyvitto's, Arto's and UFE's).
I have disabled backlight based on light levels and the problem occurs much less often. Currently trying the extended version posted a little earlier (using Acer Preferences, so any key can wakeup from standby, etc.)
I do use activesync to sync with my computer; I do download push mail (from gmail); I do use swype; I automatically download weather info - on any ROM I use... so it is possible that either of these is the culprit...
/Sifaan
In two weeks i didn't have one wake up issue with my ROM.
Autobacklight is on, i don't use the end call button for sleep mode. I just press the power button and S2U2 locks the device.
And i deativated the option to turn the backlight of if the device is not used for 30 seconds.
Possible reason for wake up problem
I am nearly sure that wake up issue occurs when i change something in windows folder. Especially when i change lockscreen, use some programs related to device lock and change start menu icons etc., wake up problem occurs every time regardless of rom (i have used nearly all custom roms)
Hello,
the last 2 times that i had this wakeup issue, the story was the following:
-i received a text
-i went in my incoming box and looked for the message
- next i closed the incoming box by pressing the end key
- screen turned off 1 minute later
and so no way to wakeup my phone !!
Hope it could help, bye.
Related
hello, anyone else have issues with alarms not sounding when setup through spb time ?
the alarm is actually triggered, appears on screen - just no sound !
this has happened several days in a row with diff alarm sounds.
last night i set a normal windows mobile alarm and setup a spb time alarm for 1/2 hour later. They both fired but still no sound from the spb time alarm.
If you know the way around this, can you please post the answer.
(T-MOB005 on Tmobile Ameo UK)
ta
shockboy2000 said:
hello, anyone else have issues with alarms not sounding when setup through spb time ?
the alarm is actually triggered, appears on screen - just no sound !
this has happened several days in a row with diff alarm sounds.
last night i set a normal windows mobile alarm and setup a spb time alarm for 1/2 hour later. They both fired but still no sound from the spb time alarm.
If you know the way around this, can you please post the answer.
(T-MOB005 on Tmobile Ameo UK)
ta
Click to expand...
Click to collapse
SBP Time is not compatible with WM6. They do not list it as being compatible (as they do with some of their products) - see SPB Time Product Page. I have had this issue in the past on WM6 on the Uni and now steer clear of SPB Time except on WM5.
Same here, no sound
ah ok, thanks for pointing out the wm6 compatability issue.
thought it was just me the first couple of days..somehow sleeping through the alarm. when u press the dismis button it does play the sound for a second or two though..crazy.
anyway, at least spb_time displays the time ok as its name suggests it should
shockboy2000 said:
ah ok, thanks for pointing out the wm6 compatability issue.
thought it was just me the first couple of days..somehow sleeping through the alarm. when u press the dismis button it does play the sound for a second or two though..crazy.
anyway, at least spb_time displays the time ok as its name suggests it should
Click to expand...
Click to collapse
Actually, you may find it doesn't display the correct time. I found it is sometime a minute or so behind (as sometimes is the clock on the taskbar in WM6)!!!
Anyone have a suggestion for an alarm clock program with will work??
the standard wm6 alarms work fine, whilst u can use spb to display time on the today plugins
Have you tried the "Wakeup Tweak" (on the options page)?
Works fine for me here.
(Ameo - Black Touch 2 - SPB Time 2.1.1 Build 937 Trial)
mojo2000 said:
Have you tried the "Wakeup Tweak" (on the options page)?
Works fine for me here.
(Ameo - Black Touch 2 - SPB Time 2.1.1 Build 937 Trial)
Click to expand...
Click to collapse
Interesting. I had the same problem with or without the tweak. I'm currently trying out Chronos by ActiveSync which is working well, but they don't have the nice Today plug-in like SPB time...
works fine here, no probs, wakeup tweak enabled
have never missed any alarm.
indeed, time lags a few seconds
wonderboygr said:
works fine here, no probs, wakeup tweak enabled
have never missed any alarm.
indeed, time lags a few seconds
Click to expand...
Click to collapse
I had a weird thought... I know I enabled wakeup tweak but it still didn't work. Now I'm thinking probably should have done a reset in between, otherwise did the tweak really install... Will try again and report back.
How is that possible. Mine also has no sound, whether the wake up tweak is enabled or disabled. Do you use wm06?
Applied tweak, reset, still no sounds.
hope the following will help. this is what i have done in my htc x7500
1. in spb time options, wake up tweak enabled.
2. spb time screensaver disabled
3. wm6 settings, sounds and notifications, check events (warnings, system events), programs notifications (alarms, reminders)
4. wm6 alarms all three disabled.
5. in wm6 power options, uncheck power off device if not used for xxx minutes, for both battery and ac power
6. in wm6 backlight options, do what you like.
then soft reset ( i do it after i make any changes)
hope it works now for you
however
i will make a video to show you it works and upload it to youtube, will be tonight though, still at work
i fact will make a video with all the settings i use. the latest version of spbtime worked
from day 1 i installed it with the dopod wm6 rom.
now i use pk2, which is based on the same rom
just give me some time, will be around midnight, local time, athens , greece
please give me feedback if with the above settings, the spb alarm workrd
wonderboygr said:
hope the following will help. this is what i have done in my htc x7500
1. in spb time options, wake up tweak enabled.
2. spb time screensaver disabled
3. wm6 settings, sounds and notifications, check events (warnings, system events), programs notifications (alarms, reminders)
4. wm6 alarms all three disabled.
>>>5. in wm6 power options, uncheck power off device if not used for xxx minutes, for both battery and ac power
6. in wm6 backlight options, do what you like.
Click to expand...
Click to collapse
With regards to step 5, won't this have a negative impact on battery life???
wgary said:
With regards to step 5, won't this have a negative impact on battery life???
Click to expand...
Click to collapse
so far, battery lasts 3 days this way. you are certainly right that with the power off checked the battery life will increase dramatically, but for the sake of the spb alarm, this is how it works for my x7500.
have the settings i use in my x7500 solved the spb alarm problem?
wonderboygr said:
so far, battery lasts 3 days this way. you are certainly right that with the power off checked the battery life will increase dramatically, but for the sake of the spb alarm, this is how it works for my x7500.
have the settings i use in my x7500 solved the spb alarm problem?
Click to expand...
Click to collapse
I already have battery issues. I tried everything but step 5, with no success. Apparently that is the key. I have gone back to Chronos, which isn't quite as nice but at least it works without a battery drain...
wgary, just to let you know that with the official htc rom wm6 (europe) and without any tweaks (apart from the spb tweak in its options), spb functions normally.
could it be an issue of dopod rom? do not know...
or maybe the use of other programs may interact with spb time?
just a thought... have you tried the wm6 fix sound? just in case? ( look for it in pk 2 thread)
this is really weird stuff man...
wonderboygr said:
hope the following will help. this is what i have done in my htc x7500
1. in spb time options, wake up tweak enabled.
2. spb time screensaver disabled
3. wm6 settings, sounds and notifications, check events (warnings, system events), programs notifications (alarms, reminders)
4. wm6 alarms all three disabled.
5. in wm6 power options, uncheck power off device if not used for xxx minutes, for both battery and ac power
6. in wm6 backlight options, do what you like.
then soft reset ( i do it after i make any changes)
hope it works now for you
however
i will make a video to show you it works and upload it to youtube, will be tonight though, still at work
i fact will make a video with all the settings i use. the latest version of spbtime worked
from day 1 i installed it with the dopod wm6 rom.
now i use pk2, which is based on the same rom
just give me some time, will be around midnight, local time, athens , greece
please give me feedback if with the above settings, the spb alarm workrd
Click to expand...
Click to collapse
sorry for not uploading the video on time, had little time and probs with pc
will do so as soon as possible
Please try updating your version of SPB Time to the latest version. I did some forum spelunking and found that they had a new version that fixed this problem. My friend and I just tried it on our Tytns and it worked for both of us... even with the phone in standby!
Good luck.
I found the following problem with most cooked ROMs (also including the last official one from HTC) /I tried that on fresh installations in every case/
I like AutoLock feature. So I made a small .reg file to modify one small entry in registry.
The moment this feature is on - if the device becomes locked, the screen goes dim. Problem is - it stays dimmed forever. I tried thousand different solutions - many combinations of registry values, power options, etc. nothing helps. If I lock the device manually - no problem. only with autolock. Anybody knows how to make it work?
Regards,
Vojtek
Maybe you should post your script, so that someone can have a look. Did this work on some previous ROM? Or has it been an ongoing problem?
Try using SmartLock, found on this site.
jmckeejr said:
Maybe you should post your script, so that someone can have a look. Did this work on some previous ROM? Or has it been an ongoing problem?
Click to expand...
Click to collapse
The official HTC ROM that I used to have before recent official update from HTC - worked very fine with this little registry mod.
The modification is as follows:
HKCU->ControlPanel->Backlight->AutoDeviceLockEnable
default value = 0
I change it to 1. This is all I do after totally fresh ROM update. that causes the dim to go permanently on from the next lock (doesn't matter if it was caused by auto or manual). even If I get back with the value to 0 in registry - problem stays. soft reset (and value set to 0) eliminate the problem.
one more thing - I never use auto-light sensor. My backlight level is always set to 2. with auto-light sensor - autolock works OK. however I loose a lot of battery life since auto-light sensor never allows backlight levels lower than 4.
Regards,
Vojtek
check out Lumos, it'll let you backlight go as low as you set it to
http://forum.xda-developers.com/showthread.php?t=450318
GldRush98 said:
check out Lumos, it'll let you backlight go as low as you set it to
http://forum.xda-developers.com/showthread.php?t=450318
Click to expand...
Click to collapse
Thank You for the tip. The tool itself is great. However it is affected same way by the autolock. Autolock causes device to stay dimmed permanently - even with Lumos running.
Regards,
Vojtek
First off... I'm new around here & still a little flabbergasted by everything WinMo, but this site has already helped me tremendously.
Secondly, I can confirm the AutoLock bug. I updated my Touch Pro to the latest official rom last night. While running through AdvancedConfig (i think...) I noticed the AutoLock option & enabled it. 10 minutes later I was freaking out that I had stuffed up my expensive new toy...
Disabled, rebooted & all is OK again.
First of all - Advanced Config has nothing to do with it (to defend the author).
Second - thank You for support. I could not find a solution for this problem anywhere and I spent hours googling. For the moment I thought that my TP is failed. Seems that nobody uses AutoLock these days. I don't know how everybody's doing it, but without locking, my TP calls to different people (especially from Favourites tab) from time to time...
Vojtek
vojtek11 said:
I don't know how everybody's doing it, but without locking, my TP calls to different people (especially from Favourites tab) from time to time.
Click to expand...
Click to collapse
I require a password/passcode level of security on my device - which the Lock/Unlock feature doesn't provide. Unfortunately, the current security implementation in WinMO 6.x doesn't allow the Today screen to be seen like the Lock/Unlock feature.
As a result of these shortcomings, most folks tend to use a 3rd Party lock application such as: S2U2, mLock, etc. as they provide the desired flexibility.
HTH,
very familiar with this issue. I'm working on it too. It affects the WM6.5 lockscreen for sure and I thought it was a problem with only that. Bugger that it affects official ROMs as well. Good info though, I can stop concentrating on the lockscreen and start looking at power mgmt.
mindfrost82 said:
Try using SmartLock, found on this site.
Click to expand...
Click to collapse
SmartLock all the Way!!
i have 2 new builds coming
NOW POSTED build 23420 found here:http://www.mobilitydigest.com/forums/showthread.php?t=1455
NOW POSTED build 23060 found here: http://www.mobilitydigest.com/forums/showthread.php?t=2002
Change log and known issues found at link above as well.
Please post any issue over there please.
Some Pictures Below FROM THE ROM
Hi, I cant seem to Fix the problem with my Wifi and your rom, It goes off after 20 seconds or so! by its self, and i want to get my email, but it wont stay connected..... and i cant figure out why but other than that... love the rom and the awesome window side slide animation
Great Job
kingfarmer said:
Hi, I cant seem to Fix the problem with my Wifi and your rom, It goes off after 20 seconds or so! by its self, and i want to get my email, but it wont stay connected..... and i cant figure out why but other than that... love the rom and the awesome window side slide animation
Great Job
Click to expand...
Click to collapse
ok i will look into the wifi to see if there is an error some where.
i ask please post any issues on the link above please
wifi - i am not having wifi issues - if you have wifi issues please do a hard reset and try wifi again - if you still have issues please post on the link posted above
same here. I tested both a secured and unsecured network without any issues. check your router.
herg62123 said:
wifi - i am not having wifi issues - if you have wifi issues please do a hard reset and try wifi again - if you still have issues please post on the link posted above
Click to expand...
Click to collapse
Ya, thanks anyways, it doesnt seem to go away for me, and i flashed Chrome rom, and it is fixed now.... thanks anyways, and again, great ROM, chrome isnt compared to it. but i like Wifi
am downloading it now (v13).. lets see. will update on ur link if i run across any problems
This is a great looking ROM. Like its almost ripped out of the TP2 or a Hero. Very quick and responsive. One noticeable isssue Ive had is a resizing problem when texting in landscape. Other than that, im also pleased i barely had to install anything, like almost everything i needed was there already.
Kudos
Just flashed this rom and I'm very happy with it. Runs very smooth and fast.
Only thing is I can't find the keyboard selector. Was it cooked in or do I have to install it? It seems the fuze keyboard is selected and this makes using the hw keyboard on a TP kind of difficult.
Awesome work on the rom!
Is all the hardware button working?
freedompeace said:
Is all the hardware button working?
Click to expand...
Click to collapse
All seem to be working on my touch pro including volume control.
I had to install the fuze / pro keyboard selector to get the hw keyboard working correctly.
Home button
Is there any chance to make Home Button open Manila Home Tab instead of WM start menu?
Hmm I installed chome editor 1.6 and now the lower left button (next to the start button) always says action and when pressed tries to start the htc action screen which isn't there. Is there a way to restore this?
First I want to say Thank You for such a beautiful ROM. It's fast, finger friendly, and professional looking. (Love the slider)
A couple things I have noticed are as followed:
1. Under the Notifications options, when I select "New Text Message", then try to select a different sound it scrolls the window behind the drop down box... not the actual drop down box. Same goes for the "Event" box, but only on some. Hard to explain.
2. Minor but annoying - When waking up and the device is locked, the clock jumps to the bottom of the screen then back up to the top.
3. Another Minor thing - "Start" occasionally shows up on the top left of the screen. Is it always supposed to be there or never? I know it brings up programs.
4. GfxBoost (lol "DO NOT DISTRIBUTE") has some icon issued on the bottom left and right. Bottom left (you can only see 1/4 of the windows logo) and bottom right (Don't know what it's supposed to be)
All-in-all i feel this is a fantastic ROM. I'd love to see what else you got up your sleeve. After about 16 hours I was down to 64% battery with hardly any use, but then again I was in the office where I get ZERO signal!
funny, I can only confirm the first issue. This happens only when using a sweep to scroll. When the slider is used it scrolls ok. I have also seen this pn the activesync screen when selecting message delivery schedules.
I'm running without manilla btw. I love Titanium
I am not registered (yet) on the other forum, hence posting here.
Installed v13 and its amazing.. fast and nice graphics..
Only one issue uptil now. In call recording is not working. It gives an error (something like cannot start ICR, wrong certificate etc..) Can I unistall ICR (not in the remove programs list) and install autocall recorder 1.2 instead? tht gives me more options..?
thanks
Thank You
Very nice ROM, thanks! I haven't gone through everything, but all seemes good so far!
Hey herg!
I had no idea you were a chef too! I flashed your rom and it is kick ass so far...
Aside from TF3D being a little sluggish (not that I care since I no longer use it... iPhoneToday all the way... for now ) it have not seen bugs.
BT file transfer - oK
3G connection - oK
ActiveSync - oK
Battery life - pretty good so far
GPS lock on - to be tested later
Wifi - to be tested later
I will try to report some more later on, but so far... kick ass!
love it
i havent updated to D-fresh-est but your doug-e-fresh is an amazing rom thank you for your contributions buddy im flashing this sucka tonight
rajackar said:
Just flashed this rom and I'm very happy with it. Runs very smooth and fast.
Only thing is I can't find the keyboard selector. Was it cooked in or do I have to install it? It seems the fuze keyboard is selected and this makes using the hw keyboard on a TP kind of difficult.
Awesome work on the rom!
Click to expand...
Click to collapse
in 6.5.1 builds the keyboard selector is gone. Instead, hold down the keyboard icon at the bottom of the screen and the selector pops up. That's the good...the bad is that it makes it harder to toggle the keyboard off the screen cause pressing it leads to he selector instead of toggling but that's the build, not the ROM. I'm still loving the ROM
Hi,
I noticed, that after a total standstill, there is now a little movement on the nike android front. I want to contribute a little share to that.
I have set up an autobuild service for the android kernel. I automatically uploads a fresh zImage with the newest patches every full hour. I also reenabled Vibration as I never had any problems with that. If there are still people aound that need a kernel without Vibration let me know, I could set up a second build, too.
[update 03.03.10] Kernel without vibration for niki100 included.
The fresh kernel is found here.
[2010.03.31]UPDATE:
- IRQ wakeups enabled -> sleepmode 1 works
- Red led flashes when sleeping
- hw3d for eclair can be chosen in commandline (not fully functional)
- Double press cam button is home on 20key nike now
[2010.04.08]UPDATE:
- Some Keypad and defconfig changes to support ubuntu
[2010.07.01]UPDATE:
- Added .patch files to downloads for all who want to compile on their own (Recommanded! Some new devs would be very welcome here)
[2010.07.02]UPDATE:
- Removed .patch files again, they don't work as intended. Just 'git apply' the "Changes compared to stock kernel" instead...
- Fixed audio (please give me some feedback if it works now)
[2010.08.30]UPDATE:
- I just was tipped of that the service has been down for full 3 months (thx youngsien)
- Service is now online again, but will from now on only be updated once a day (should be enough)
Happy Androiding everyone!
mblaster
PS: If you don't know what a zImage is or does: It is the core of the Android operating system. It is usually in the same folder like haret.exe. You can tell your Android build to use a specific zImage in default.txt
Nice idea...
That's what we need to make good android builds working on nike.
The vibration ALLWAYS freezes de touchscreen, maybe a htc p5500 model issue.
i will follow this post hourly...
OK, I included the stock kernel without vibration in the service. Have fun!
@arleybarros: I dind't mean to post here hourly, but my server will keep the kernel up to date
the stock kernel freezes after a little vibration..
shouldn't vibration be disabled on stock release?
nik2208 said:
the stock kernel freezes after a little vibration..
shouldn't vibration be disabled on stock release?
Click to expand...
Click to collapse
Yeah, you're right. The files were exchanged by my build script... Thanks for the hint, everything should be fine now.
*bump*
New updates in first post... I hope everything works
mblaster,could you post your default.txt cmdline, please? seems like nike still does not sleep, there no signs of flashing red led on mine.
my cmdline: "pm.sleep_mode=1 mddi.width=320 mddi.height=480 hw3d.version=1"
I'm running msmissions eclair.
are you running it without rootfs? there seems to be a problem with the norootfs basefiles that prevents sleeping.
yup, norootfs.
ok, got progress, I've runned android again, now nike felt asleep and flashing red led. wakeup works too - double tap on dpad center. I think that was because there was no reboot after installing after data wipe, norootfs missing some controls on power.
also, there is another power problem - MSM's standard reboot/poweroff commands from android does not working, can we fix this? device just freezing, seems like some revision on vogue's power controlls broken ours.
rzk333 said:
also, there is another power problem - MSM's standard reboot/poweroff commands from android does not working, can we fix this? device just freezing, seems like some revision on vogue's power controlls broken ours.
Click to expand...
Click to collapse
The same here with the norootfs stuff. I tried myn's donut on sqsh and norootfs. SQSH works like a charm (powermanegement, net, reboot, powerdown), but the same build/kernel combination has the problems mentioned before...
[minor UPDATE] Double press cam is home now on 20key nike
here is that someone is going to operate the headphones??
i can't use internet.
help me.
i set my carrier.but i can't use internet
[minor UPDATE] Double press cam is home now on 20key nike
Click to expand...
Click to collapse
can we make something about "Enter" key on niki100?
I've tried to run kaiser ubuntu and stuck with login - I simply cannot press enter :/
maybe some virtual button can be mapped to something?
rzk333 said:
can we make something about "Enter" key on niki100?
I've tried to run kaiser ubuntu and stuck with login - I simply cannot press enter :/
maybe some virtual button can be mapped to something?
Click to expand...
Click to collapse
Where would you like to have the enter key? I can try to fix it in, but i am not sure where to put it.
Some ideas would be:
- Put enter on cam, press WinKey once = menu, press Winkey twice = home
- Put enter un the key on the lower right (InternetExplorer in winmo?), probably better, but i dont know for shure which button it is. Dou you get a 'z' if you press it? I guess you do:
Code:
{{KEY_Z,FALSE,FALSE,FALSE,FALSE},FALSE}, // UNKNOWN KEY
Can you confirm that you get a 'z'? I will change it to enter then.
€: If ubuntu works it would be nice if you could start a thread about it. Would be great to have a full blown linux box in your pocket
Latest Kernel is working nicely on my Nike100, really impressed with the battery life now, great job on getting sleep to work. I have a request though... would it be possible to make one more kernel for the Nike 16 key? at the moment you can't type on it or use any of the keypad as the mappings are all wrong. If it would help I can tell you what keys are currently mapped to what on the 16 key. I don't know how hard it would be to change but if it is doable I would really appreciate it as it is really the last thing that is stopping the port from being day to day usable for me and other 16 key users. Unfortunately the onscreen keypad is just a bit small for typing with daily.
Thanks, hope its not too hard a fix.
MWG_Thomas said:
Latest Kernel is working nicely on my Nike100, really impressed with the battery life now, great job on getting sleep to work. I have a request though... would it be possible to make one more kernel for the Nike 16 key? at the moment you can't type on it or use any of the keypad as the mappings are all wrong. If it would help I can tell you what keys are currently mapped to what on the 16 key. I don't know how hard it would be to change but if it is doable I would really appreciate it as it is really the last thing that is stopping the port from being day to day usable for me and other 16 key users. Unfortunately the onscreen keypad is just a bit small for typing with daily.
Thanks, hope its not too hard a fix.
Click to expand...
Click to collapse
Do you have this parameter in default.txt?
Code:
board-htcnike-keypad.keypadlayout=1
If not, add it and remove other entries concerning keypad layouts (might be there from kaiser). Most of the keys should be mapped correctly. Enter key seems to be missing. Could you try to press the button on the lower right (Internet explorer or something like that, depending on the branding of your phone) and tell me if it prints the letter 'z'?
Where would you like to have the enter key?
Click to expand...
Click to collapse
iexplorer key is useless in ubuntu and android, I think, so we can remap it, camera home key is used widely in android, you dont need to open up slider to access menus
If ubuntu works it would be nice if you could start a thread about it.
Click to expand...
Click to collapse
that would be nice too, now we can run LXDE or other X windowmanager compiled for ARM, ubuntu boots up fine and works like on kaiser. you can learn how this happen for ARM in Omegamoon's blog
The patched kernels will be ready on my download page in a few minutes (compiling...). Please let me know if it worked.
Done a search and can't find a solution...
With the 'easy to press' buttons on the HD2 the phone screen keeps powering on in my pocket (I use phone lock to stop auto dialling).
This is draining the battery...
Any way to stop this happening? Say, have just the power button only turn on the screen, after a long press for example???
eugene7 said:
Done a search and can't find a solution...
With the 'easy to press' buttons on the HD2 the phone screen keeps powering on in my pocket (I use phone lock to stop auto dialling).
This is draining the battery...
Any way to stop this happening? Say, have just the power button only turn on the screen, after a long press for example???
Click to expand...
Click to collapse
Try settings / system / keylock settings. There are options to set the buttons as non responsive except for the power button.
stevedebi said:
Try settings / system / keylock settings.
Click to expand...
Click to collapse
I have this same issue and I've got a stock 3.14 tmobile rom but when I go to settings / system /, there is no options for keylock settings. is that on a custom rom?
+1 for this
From new my phone used to have the option of locking all buttons except the power key ... until I did my first hard reset, then it vanished! I would have thought the settings app would have been in the ROM, so restored after the hard reset, but obviously not.
Anyone have a cab for it or care to extract it from their HD2?
<quote>Try settings / system / keylock settings. There are options to set the buttons as non responsive except for the power button.</quote>
Nope, no such option on my HD2...
Seems we need 'keylock.exe'
Anyone got it and know if it will work in an HD2?
Ok, at least I know I'm not unique now...
i've installed Hd2ProximityScreenOff-0.2.cab which I guess turns the screen back off quickly if an "in-pocket" button press brings the screen to life. (can't confirm what happens in my pocket, but seems to do the trick in my hand)
but I'd really like to know if someone knows how to get to this keylock setting
HeadMajor said:
I have this same issue and I've got a stock 3.14 tmobile rom but when I go to settings / system /, there is no options for keylock settings. is that on a custom rom?
Click to expand...
Click to collapse
Take a look at my signature. I'm using NRG ROM, which I highly recommend.
stevedebi said:
Take a look at my signature.
Click to expand...
Click to collapse
ahh crap, noob mistake. sorry.
any chance you can dig up where "settings / system / keylock settings" points?
maybe it points to something already in the stock rom?
HeadMajor said:
noob
Click to expand...
Click to collapse
i can install the stock rom update right from tmo, and install cabs and crap, but not yet ready to make the leap to customer roms (or android for that matter)
try pocketshield software. it has feature that turns your screen immediately off if its in pocket etc with proximity sensor, also its great and cool.