I recently saw a guide here how to open your eris and transplant the track ball.
I have no reason to transplant the trackball, but I did open it to attempt to clean it.
I have throughly cleaned the trackball with rubbing acohol three times now and I still can not scroll downward.
Also now my phone only boots into safe mode.
What is wrong with my phone?
Update:
I have now discovered why it boots into safe mode.
Turn out, now the trackball is being determined as pressed, so when i booted into booted into recovery to see what happens, it reflashed pb0000 or whatever it is called.
And down scroll still doesn't work.
Update 2:
I refit the trackball another time and now it now longer boots into safe mode.
Does anyone know why I can't scroll down? I can not nandroid restore if I can't scroll down.
Please help.
some dust or dirt probably got inside the trackball and is blocking the sensor from sensing the trackball movement. since you already opened it up, i would suggest doing that again, in a dusk free environment, then pull the trackball out, spray some compress air on it, then put it back together.
ECLIPS3 said:
some dust or dirt probably got inside the trackball and is blocking the sensor from sensing the trackball movement. since you already opened it up, i would suggest doing that again, in a dusk free environment, then pull the trackball out, spray some compress air on it, then put it back together.
Click to expand...
Click to collapse
Year I cleaned out all the dust already with an air compressor.
I think it is actually some grease because I remember it first stopped working on easter when my finger were a little bit greasy from ham. So I planning on soaking the ball, with its metal casing, in rubbing alcohol.
I first thought that the warranty became void when I rooted, but after research, I didn't really void it until I broke the seal. If I had known this before hand I prolly wouldn't have opened it.
Thx for the help anyway.
I will post more results eventually.
Cleaned it even more, still doesn't work.
Well I discover that I can use Amon's recovery with adb, so now I am just not gonna worry about the trackball.
it's a common problem with eris' it seems. I had it, and I can remember t least 2 others with the problem.
I used it as a warranty to replace my 2.1 leak so i could root my phone instead, if you still have that little void sticker intact, i suggest you replace your phone. replacing the trackball wont do anything, as the enclosure that you get doesn't include the lenses, just the ball and the carriage.
just to double check:
the manufacturers warranty is for hardware issues up to a year after purchase right?
eris
same issue happened to me with my old eris the trackball wouldnt move down and i got a replacement i just went to verizon and told them and the guy lookedc at it , i was on 2.1 rooted he didnt care he just looked to see it didnt work he said ok and doubnle checked my address and one came in the mail 2 days later and i had to ship mny old one back... now a month ish later my new droid is tharting the same issue again only thing i can think of why its doin this is my jeans are a little tight and maybe the trackball is rubbing against it and now its causing the crackball to be pressed against the sensor and it is defecting it, onlything i can think of... EDIT( and yes the warrenty is 1 year for hardware so just bring it and show him it wont go down and hel say ok and send you one no questions asked, mine was opened and sticker was removed he didnt care)
It seems to stop once n awhile but it is a known issue. And if it starts again im gona open it and do some testing but for now it seems to working ok, my old droid stopped going down completely
-------------------------------------
Sent via the XDA Tapatalk App
After some research and opening my eris a couple of times. I think I have the solution.
I noticed that sometime when I plug the charger into my eris, the cursor moves down.
Before that I released that the track ball work by 4 spinning magnets and 4 magnetometers.
The carriage of the trackball looks something like this:
▊ ▔ ▆
▏O ▕
▆ _ ▊ < Left magnet
^ Down magnet is there
Directly below the down magnet is the usb female slot.
With all my research people have told me that there left and down have stopped working in the past.
Coincidentally, the down and left magnets are very close to the metal usb connector. I am guessing that this is the issue.
Are you saying the sensors are getting magnetised?
-------------------------------------
Sent via the XDA Tapatalk App
Update: when i plug in my usb the down trackball is more sensitive and about normal, idk if its luck or
Proof of concept
-------------------------------------
Sent via the XDA Tapatalk App
Palmbxr said:
Are you saying the sensors are getting magnetised?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
The trackballs is consists of a casing with four magnets.
Below is a blackberry track ball which is equivalent to the eris track ball.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can see the black cylindrical magnets in the corners.
Palmbxr said:
Update: when i plug in my usb the down trackball is more sensitive and about normal, idk if its luck or
Proof of concept
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Above is the chip located above the trackball, also located on the same chip is the metal usb female.
So as you can see the lower magnet come in close contact with it.
Now, I am not 100% sure that this is the cause, but it is a good possibility.
Just call Verizon, make sure to get a good rep, tell him/her that your trackball is messing up. Let them know that you tried to fix it, just don't tell them you opened it, unless they ask. It's not lying or fraud, they don't tell you the whole truth anyways (hidden fees). lol They should replace it without a problem, the only thing is you might get a Droid Eris with 2.1 pre-installed.
-------------------------------------
Sent via the XDA Tapatalk App
Well no 1 wants to go through reflashing all there ****, were looking for a fix so we can fix it right here
-------------------------------------
Sent via the XDA Tapatalk App
Excuse me then, it should be a simple fix if nothing shorted out. I returned my Eris because it shorter out, I cleaned everything, and replaced the whole track ball with my other Eris and still had the same problem. Now I know not to use my Eris while plugged in via usb, there is too much space left over for the usb plug to loosen. I hope this thread will make it easier to fix the flaw in design. So it won't be a problem any more. Thank you for taking the time to read.
-------------------------------------
Sent via the XDA Tapatalk App
Didnt mean for that to sound mean sorry dude
-------------------------------------
Sent via the XDA Tapatalk App
fKngFtd said:
Excuse me then, it should be a simple fix if nothing shorted out. I returned my Eris because it shorter out, I cleaned everything, and replaced the whole track ball with my other Eris and still had the same problem. Now I know not to use my Eris while plugged in via usb, there is too much space left over for the usb plug to loosen. I hope this thread will make it easier to fix the flaw in design. So it won't be a problem any more. Thank you for taking the time to read.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
I would actually prefer a work around IMO. I never use the trackball unless I need to flash a rom.
Track balls are way old technology from back before laser mouses, so why have one on a phone.
A couple of "work arounds" I thought about were:
1. Change the hotkeys in the recovery and then recompile and flash
2. Use the Recovery from your phone in an ADB like fashion. (This is currentyly supported but has many limitations. For example you can't flash ROM ZIP, but you can nandroid."
3. Control the recovery via Android Screen cast or something similar
http://forum.xda-developers.com/showthread.php?t=557717
4. Solder in a trackpad and remove the trackball. (Pretty Far fetched IMO.)
Mine started screwing up again :/
-------------------------------------
Sent via the XDA Tapatalk App
Related
I had my Gtablet for a week and after the update, it works fine. Today, when I power up the tablet, the screen just went blank (white screen). I am a novice thus I did not mod the tablet. What happens? I hate to return the tablet since I was starting to enjoy it. PLease advise.
You might try to reload a working firmware. If you have clockworkmod, and a saved image, restore it and see what happens, perhaps a driver got corrupt somehow. If that does not work, it may very well be hardware failure. Take it back to Sears a white screen is just that. Not useable.
Thanks. Guess I need to run over to sears again for another exchange.......This was my second one. The first one just doesn't boot up and this one was working fine until now.
I am having this white screen of death issue. I'm hoping that getting the battery completely drained will reset something and allow me to see the birds again...never thought I'd be wanting to see those birds, but here I am.
Has anyone ever had the blank white screen of death and gotten their gtab to work again?
damn it, same thing just happened to me. I left it unused for 2 weeks, now I turn it on and white screen! not nice
Bump for the sake of my gtab? anyone??
Sent from my PC36100 using Tapatalk
and bump again? anyone?
White screen follow-up
I believe that this "white screen" is the equivalent of when you see a "No Signal" notification on your HDTV. I'm pretty sure that the tablet is running fine, it's just not outputting video to the LCD. I didn't have a dock to do video out to verify this, but I am fairly certain that's what was happening here.
I had to RMA mine. If anyone has other results/info, please let me know.
The first gtab I bought when it started had a white screen that you could hardly see anything and it blinked. I took it back to office depot and got a new one.
Follow-up White Screen (more info), using HDMI output
Have the same problem with my second GTablet. However, I bought an external dock that has an HDMI output for the GTablet. With the working GTablet, when I plug it into my television, the television mirrors the output of the screen perfectly. With the white-screen tablet, only the television shows something. As I am a basic hardware guy, I guess there are two reasons for this:
1. The flex cable between the display and the computer is loose/broken.
2. Something in the electronics is wrong.
I have received an RMA number for this problem from Viewsonic, although they may just look at it and send it back to me. Any other experiments that people want me to try while I can still see on the external?
Otherwise, I'm just gonna send it to Viewsonic in a couple of days and wait 15-20 business days.
G Tablet White Screen
I have had this lately too. Once in a while when i turn my Gtab on the screen is white. When it first happened, i assumed it was bricked. I tried doing a update.zip back to stock...nothing...just white screen. Then when i was in the process of doing the update.zip flash again, i bumped the bottom, right corner of the tab on my desk and the screen all of a sudden when back to normal, showing the home screen. Now, if it does this white screen business, a simple tap on the right side usually brings it back to normal. I would also assume this is a loose connection of some sort. Anyone cracked the gtab open and been able to find where the screen connection is located? I bought my gtab Jan 14 2011 so it is out of the return window to Sears, and i haven't called Viewsonic for assistance yet as i fear i won't get very far with them. Any help is greatly appreciated!
Triple Love Tap Fix on Bottom Right Corner for White Screen Fix ... Back to Normal
After reading the last post, I tried a triple love tap on the bottom right corner on a white-screened g-Tablet, and voila. It's working again. The Internet is a grand thing. This love-tap thing is clearly undocumented Viewsonic security feature.
As for reference, I did break it open and tried to figure out where the flex cable went, but it's a pretty tight SoC design and when I removed the cover, the connection seemed to be sandwiched between the motherboard and the touchscreen itself. Not wanting to remove the 5 various cables and 3-4 various buttons floating around, I gave up at this point.
If I have to periodically do a love-tap, well so be it. At least, I'm not spending $600 for Motorola Xoom. Thus is the fate of cheap bastards like myself who like to play Fruit Ninja on the cheap.
I can't believe this worked!! "Love Tap" to the right corner brought my white screen back as well.
Bump really works, thanx!
i can't believe the bump worked. I took it apart and looked inside at every connection. I was about to throw it away and then i found this post. I did the bump and it's back to normal.
Another "love bump" success!
Just had it happen to mine this morning -- blank white screen. I did a love bump as suggested, and the screen is back! Definitely sounds like a connection issue, but I don't recall bumping it before it blanked out. I'll just keep fingers crossed that it doesn't happen again.
BTW, for anyone else who needs to do this -- it's definitely a "bump" compared to a "tap". I had to give it enough oomph that I could have craked a walnut with my palm under the same force. Not a "whack" but a "bump" compared to "tap"
WTF WITH VIEWSONIC/USMERCHANTS! I Live in Mexico, I sent (paid..) my tablet to the US for warranty (white screen, the tapping doesnt seem to work with me..) they recieved it, send it back to a friend in the US and he sent it back to mexico (PAID AGAIN).
Just recieved my gtablet, turn on, white screen, nice they didnt even touch the friggin thing!
WHAT THE F...
Ok, bumping this thread again, and letting you know.
Since I was pissed, I opened up my gtablet! Well to letting you know, the CONNECTOR that goes FROM the motherboard to the LCD...was completely loose and not completely connected. This has to be a factory fault, since well, its almost impossible for it to disconnect! Anyway, My tablet is working just fine now, (after 4 months ¬¬)....I will try to get my shipping money back from US Merchants, bastards.
RAWR!
[REQUEST] A permanent solution than periodic love "tap/bumps"
Can you post a picture of the connector? I broke open my tablet before, but I was unable to locate this loose connection. Although I find the current solution very amusing/charming , I would like to have a permanent solution on this thread.
For long term care of the tablet, I've had to do this solution about once every 2-3 months on my 6 year old son's tablet. He had the tablet with the original problem and he may occasionally drop/jostle the thing more than I. So, for the lifetime of this product, the love tap/bump may be an acceptable solution. However, it is clearly a loose connection problem, and more information on your solution would be very helpful to the community.
pmcnano said:
Ok, bumping this thread again, and letting you know.
Since I was pissed, I opened up my gtablet! Well to letting you know, the CONNECTOR that goes FROM the motherboard to the LCD...was completely loose and not completely connected. This has to be a factory fault, since well, its almost impossible for it to disconnect! Anyway, My tablet is working just fine now, (after 4 months ¬¬)....I will try to get my shipping money back from US Merchants, bastards.
RAWR!
Click to expand...
Click to collapse
My solution to the white screen!
I though how stupid I was since I didnt took pictures, but let me explain.
Using the hardware breakdown pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I draw a Red Square in the "affected part".
In the top of the square is one end of the cable, in my case this was correct. The other end is underneath the motherboard, so you have to take out all the screws for the motherboard to check the other end, this was completely off.
I dont know if this will help everybody, because I gotta say for myself, the bumping in the bottom right didnt worked for me, not even once and I SMASHED the thing really hard!
Cheers
Paul
edit:
BTW, US MERCHANTS warranty told me someone screwed up on their side, I should have gotten a new tablet ¬¬. Anyways, I'm trying to make a deal with them, since I paid like 50 dls for shipment (I live in Mexico..) and they didnt do anything. Will let you know maybe I get a free dock!!!
For the past day or two my phone has been enabling car mode.
I haven't made any major updates in a while either. What is really pissing me off is that it's disabling any sound coming from the phone and it is closing some apps instantly. It is happening whether my phone is plugged in or not, and if i want to use the phone for storage over usb and car mode decides to activate the computer claims it has been disconnected though the phone says it's still charging.
Is there any way to get rid of it? I don't have a car, or any sort of dock for the phone. I really have no use for whatever it was meant to do and I'd really like it gone...
Any ideas/suggestions?
I never had a problem with car mode activating at random, however I hate car mode and the Google car app with a burning passion, so what I did is...
- Uninstalled the Google Car Home app via Titanium Backup
- Downloaded (and subsequently purchased) the app NoDock. NoDock prevents your phone from going into car mode altogether, and its saved me a lot of frustration. I think its $1.99, but don't quote me. There's a trial you can get first for 7 days, I'd recommend that.
That;s obviously a road requiring you pay to fix the problem (and it might not even...) However, if your phone is acting abnormal for no reason, ie you haven't neglected it or played soccer with it, then vzw should replace it... But I have no experience with that, so that's all I've got for ya, sorry! Best of luck.
I looked for the trial version ad it doesn't seem to be out there anymore... The full version still advertises it as to use the trial before buying, but I can't seem to find it...
At this point the phone isn't making any progress charging and it is continuously connecting/disconnecting from the computer...
If it doesn't start working might have to un-root and bring it in >.>
my tbolt lately as well activates car mode when i am in the car but i hate it and want it dead... it happened after installing gingeritis.... but it also did it on das bamf gb... i refuse to give up my gb so i will execute the app!!
studiorat said:
my tbolt lately as well activates car mode when i am in the car but i hate it and want it dead... it happened after installing gingeritis.... but it also did it on das bamf gb... i refuse to give up my gb so i will execute the app!!
Click to expand...
Click to collapse
Well, deleting Google's Car Home app will prevent that from launching, however, the Thunderbolt itself has a "car mode" that it will enable when the dock trigger is activated. So, unfortunately, simply deleting the Car Home app might not solve your entire problem, but its worth a shot nonetheless. Also, I'm not sure that NoDock will work with a GB-based ROM, but that, too, is worth giving a try!
bobz1993 said:
I looked for the trial version ad it doesn't seem to be out there anymore... The full version still advertises it as to use the trial before buying, but I can't seem to find it...
At this point the phone isn't making any progress charging and it is continuously connecting/disconnecting from the computer...
If it doesn't start working might have to un-root and bring it in >.>
Click to expand...
Click to collapse
In all honesty, if its not even charging anymore, un-root, wipe, and nand that puppy and send 'er in. I know that the TB is unique in that it doesn't use a magnet to activate Car Mode like previous HTC phones, but instead it uses (to my knowledge) a short in the USB slot to decide whether the phone is docked or not. So problems with USB mounting, charging, docking when not docked, etc. would seem to indicate that you have some sort of problem with the port itself. That's just a shot in the dark, but man, I'd have sent that in yesterday
And as for NoDock, I just looked, and I can't find the trial either
To some extent it is still working. It isn't getting any charge, but if I unplug the phone it turns off almost instantly. Seems like it will be hell to move the stock stuff over to the phone to flash it, but looks like that's what its come to... Guess I'm bringing it in tomorrow...
bobz1993 said:
To some extent it is still working. It isn't getting any charge, but if I unplug the phone it turns off almost instantly. Seems like it will be hell to move the stock stuff over to the phone to flash it, but looks like that's what its come to... Guess I'm bringing it in tomorrow...
Click to expand...
Click to collapse
If you have a friend with a smartphone or even any kind of bluetooth-capable storage device, you could send the files to yourself via BT... It may not be the fastest, but it might save you some major frustration. But yeah dude, that sounds straight messed up. Best of luck.
I just put the sd card into my laptop to transfer. Back on stock (feels soo different...) No more car mode... But the phone still isn't charging... Until I can bring it in I guess I'll make the phone look like it isn't brand new again...
bobz1993 said:
I just put the sd card into my laptop to transfer. Back on stock (feels soo different...) No more car mode... But the phone still isn't charging... Until I can bring it in I guess I'll make the phone look like it isn't brand new again...
Click to expand...
Click to collapse
Either way, as far as I know, VZW checks for two things:
1) Obvious evidence of negligence and/or intentional damage
2) Something I don't remember that has nothing to do with root
So you should be in the clear, if anything just say you did a factory reset yourself to try to fix the problem
Well as it did when I rooted it, it recovered all of my apps w/o me having to do anything. So the phone already looks the way it did before excluding homescreen stuff and an empty inbox/contacts atm. And the most damage there is, is a small scratch where there was already an air bubble on my screen protector. If they would have ever made a case that fit the extended battery that probably wouldn't even be there =o
bobz1993 said:
Well as it did when I rooted it, it recovered all of my apps w/o me having to do anything. So the phone already looks the way it did before excluding homescreen stuff and an empty inbox/contacts atm. And the most damage there is, is a small scratch where there was already an air bubble on my screen protector. If they would have ever made a case that fit the extended battery that probably wouldn't even be there =o
Click to expand...
Click to collapse
Haha yeah I feel you on that one. I think the type of negligence they look for is more like a mangled looking device with the customer claiming innocence. You should be fine in my opinion.
hmm... just woke up, about to bring in the phone, which did manage to charge overnight. noticed i still have a rotating rosie and it looks like i'm still undervolted as my kernel was doing earlier. well neither highly noticable as bad things... and car mode did come back today so, i'll be bringing it in now...
Go for it bro, I really doubt they'll check for little stuff like that, especially considering the bigger issue of car mode and your charging problems. Good luck though!
Sent from my ADR6400L using XDA Premium App
never herd of this before
Unable to get out today, so I've been looking into other options for now.
This seems to be what it's used for though I've never been given these options when the phone goes into car mode. The icon shows up in the notification bar identical to the picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On the VZW site these are their solutions. (none worked for me being there is no water damage and the port looks fine from what i can see, still gonna have to bring it in...)
Maybe this can help someoneelse if anyone runs into this problem or bring more options to try to help me fix it.
From what I can see, the first picture is of HTC's car home application, as opposed to Google's. When your phone enters car mode, the default action is to launch one if those applications, unless you've manually removed them. The fact that your phone enters car mode but launches nothing is abnormal in and of itself, not to mention the fact that it shouldn't be activating car mode in the first place.
Sent from my Mecha using XDA Premium App
I did manage to make it to the vzw store and they were surprised to see car mode on the phone at all. The lady at the store took out the battery, restarted the phone and concluded that I would get a replacement after the bill that was just paid like yesterday clears with them.
Good! Hopefully all goes well and you'll have a functional device soon
Sent from my Mecha using XDA Premium App
Noticed that sometimes no matter how careful i was about swyping the correct word, it would come out wrong.
I checked "show complete trace" in swypes settings to see where i was messing up, and i noticed something much worse than my own mistakes.
Sometimes, my swype sensor goes nuts for no reason. You can see the trace jumping all over even though my finger is moving in a straight line. Heres a screenshot of just moving my finger left and right to see how the trace jumps everywhere:
normal trace
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crazy trace
Sometimes its worse, but it makes swyping very frustrating. Im wondering if this is a touchscreen issue, and not just confined to swype. I have had trouble in the past moving desktop icons around, and it seemed like something was just off.....
anyone else have this problem?
lourivellini said:
Sometimes its worse, but it makes swyping very frustrating. Im wondering if this is a touchscreen issue, and not just confined to swype. I have had trouble in the past moving desktop icons around, and it seemed like something was just off.....
anyone else have this problem?
Click to expand...
Click to collapse
My screen seems to be 'off' every so often. Most often near the top quarter of my screen when in portrait. Even in landscape it's stays off. So I know it's not software.
Swype messed up for me too a couple times. More jagged than even what you posted. Though it cleared up after an evening or so. Though most times I use SwiftKey. So it could still be doing that.
Sent from my páhhōniē
gr8hairy1 said:
My screen seems to be 'off' every so often. Most often near the top quarter of my screen when in portrait. Even in landscape it's stays off. So I know it's not software.
Swype messed up for me too a couple times. More jagged than even what you posted. Though it cleared up after an evening or so. Though most times I use SwiftKey. So it could still be doing that.
Sent from my páhhōniē
Click to expand...
Click to collapse
thank god im not the only one. Im starting to think i might just have a bad phone. This did this to me on cm and stock. And yes ive had super jagged lines too, i just couldnt replicate it for the screenshot.
What other issues have u had with your device (battery), and is your screen abnormally dim?
Just that screen issue. I exchanged the phone once, only because of screen issues. Dead pixel and touch was off by a bit on the top and bottom of the screen.
I feel bad with all the issues you're having with yours. Mine has been great on nearly everything.
Hopefully you'll get yours figured out. I'm regularly on here as I'm recovering from surgery. Literally nothing else to do. Feel free to message me if you have a minor issue that isn't quite thread worthy. Gives me something to do.
Sent from my páhhōniē
swype sensor?
tell me, is it plugged in when it is messing up? or does it become worse when plugged in. i found that i had a defective charger and the "cursor" or where it was registering y input would jump erratically around the screen! eventually my phone died and i had o get it replaced.
Nope, plugged in or not it doesn't mess up anymore. Hopefully my phone won't die 0.o
Sent from my páhhōniē
tmckenn2 said:
swype sensor?
tell me, is it plugged in when it is messing up? or does it become worse when plugged in. i found that i had a defective charger and the "cursor" or where it was registering y input would jump erratically around the screen! eventually my phone died and i had o get it replaced.
Click to expand...
Click to collapse
gr8hairy1 said:
Nope, plugged in or not it doesn't mess up anymore. Hopefully my phone won't die 0.o
Sent from my páhhōniē
Click to expand...
Click to collapse
Think I've finally got some issues straightened out. Battery life is now incredible (literally the best ive ever seen on a phone) running cm7, and havent had issues with swype since last night.
Will report back if it happens again/my phone craps out. Fingers crossed!
spoke too soon. got home and while typing while the phone was charging i got this:
it seemed really bad, but what ive noticed is sometimes its worse than others, so its not just good or bad, but varying degrees of bad.
Battery life seems fixed, but i cant learn to live with this either. I might try to swap it at radioshack before by 14 (or 30 days) is up.
im telling you, its the charger. im actually using my old moto charger an i havent had any problems
for me it does it when my phone is plugged in charging
agree with some now. Ive only noticed it when plugged in.
Is this rom specific, or does it happen to every rom? I sill have a month to exchange if i need to.
Im using the newest CM7 KANG build btw
This generally happens with non original chargers, feeding the wrong current and driving the touch sensor insane, is what I've heard... That explanation worked for me. No erratic behaviour with original charger, but crazy behaviour with the blackberry charger...
Sent from my SAMSUNG-SGH-I777 using XDA App
Can also occur with the original charger if plugged into noisy power.
I almost thought my Infuse was defective when I first got it because I tried to charge it using the factory charger on an inverter - that combo made the touchscreen VERY unhappy (as in, unusable, you couldn't even unlock the phone)
Factory charger in a real wall outlet was fine.
I've had the same kind of problem before when I was using my cousin's droid x charger(probably wasn't the best idea any way). It would cause swype to get really unhappy, even worse than yours. I have not experienced it with the stock charger but then again I rarely use my phone while it is plugged in.
hmmmm, well currently using my captivate wall charger/usb cord. Ill have to try it with the original when i get a chance to switch them.
They looked exactly the same to me.
If this does end up being the case, where can i buy a stock usb cord, if i need extras?
Mine does it while plugged in with the stock charger. its almost impossible to text sometimes while its plugged in.
anyone considering returning phone? Is this cause for concern? Do all phones do this?
My Atrix was even worse at that...
Sent from my SAMSUNG-SGH-I777 using XDA App
It may be more of a function of how "clean" your wall power is.
As I said - mine works fine on the stock charger at home, but it basically froze the touchscreen when connecting the stock charger to an inverter.
Entropy512 said:
Can also occur with the original charger if plugged into noisy power.
I almost thought my Infuse was defective when I first got it because I tried to charge it using the factory charger on an inverter - that combo made the touchscreen VERY unhappy (as in, unusable, you couldn't even unlock the phone)
Factory charger in a real wall outlet was fine.
Click to expand...
Click to collapse
I had the exact experience with my GSII. Took it out of the box on the way home with it, plugged it into an inverter while I fired it up the first time, and thought I had gotten a defective phone. Touching the screen to slide off the stock lockscreen it looked like I was shaking all over the place. Typing was impossible. The stock charger did the same. I also got no in call audio, but that could have been from the touch screen being freaked out by any slight touch. Unplugged the phone and it was perfectly fine.
I later found one of my old USB chargers did the same thing on wall power. I'm now using a USB lighter plug charger on the go and it works fine. The inverter I have is an older black and decker 400watt and it tests out to be as good as it ever was. Must be something in samsung phones that really dislikes anything but a nice clean sine wave power output.
my s2 has gone mental tonight.
i charged it up to 100% before i left. then tonight for some reason it kept showing this when the charger wasnt plugged in
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so i kept restarting and taking out the battery til it stopped.
you can see the charging period didnt seem to show up on the graph. the charging period shown there i was not charging but the phone seemed to think it was. so as i was restarting it a few times it went from about 70 to 49 to 17 to 49 again
and also i havent been able to get a phone signal for ages and then when i can it wont let me register a network.
my phone is now basically just a wifi web browsing device until i get it sorted :crying:
Sounds like a battery failure.. Not sure tho.
Sent From My Sexy Sensation Running Aokp.
oh ive just seen this
http://www.dailymail.co.uk/news/art...unable-make-calls-text.html?ito=feeds-newsxml
thats a relief. o2 is down nationwide
EVERY single time I've heard of this issue (and there are a TON of threads all over XDA about this, not to mention all over other forums - seriously, just google "i9100 charging paused voltage too high", and watch how many results you get), it is due to a dirty or failing USB port.
Steps to take.
-clean USB port with a clean, dry brush. (don't be TOO rough)
-if that doesn't work, take out the battery, and with a q-tip and small amount of isopropyl alcohol, clean the USB port. Let it dry, then replace the battery.
-if THAT doesn't work, you'll probably have to get the part for the USB port replaced.
---------- Post added at 04:52 PM ---------- Previous post was at 04:52 PM ----------
elquango said:
oh ive just seen this
http://www.dailymail.co.uk/news/art...unable-make-calls-text.html?ito=feeds-newsxml
thats a relief. o2 is down nationwide
Click to expand...
Click to collapse
This has nothing to do with what you posted...
yeah i know. i had both things happen at the same time so initially i thought it was my phone on the fritz and they were related
so i tried those things and it still having problems.
I bought this replacement in Nov off Ebay. After i lost my original one. Do you think I can still take it anywhere to be repaired?
will the o2 store look at it for me?
such a hassle. im gonna have to unroot it and stuff
oh great and now it keeps randomly vibrating and going to this screen and then back to my home screen
elquango said:
so i tried those things and it still having problems.
I bought this replacement in Nov off Ebay. After i lost my original one. Do you think I can still take it anywhere to be repaired?
will the o2 store look at it for me?
such a hassle. im gonna have to unroot it and stuff
oh great and now it keeps randomly vibrating and going to this screen and then back to my home screen
Click to expand...
Click to collapse
By "those things" I'm guessing you didn't actually replace the part for the USB port. Just the cleaning steps?
That image is "desk clock" mode. It gets activated when certain pins in the USB port are shorted with a specific resistance. If you thoroughly cleaned the port as best you could, and are getting random desk clock mode and still randomly getting the charging paused message, then I'd say your USB port is dying a slow death. You'll need to get the part replaced.
From what I hear the part itself is pretty cheap (like $15) and not hard to replace. I don't know if O2 will do it for you though, since you didn't actually buy the phone from them. You can try... but I doubt it, since it was a second hand purchase. Or just take it to a local cellular repair shop.
My phone is also having a similar experience. I running an AOKP rom so it keeps charging instead. How long will the usb port work for. It's being sent back to Samsung to have the screen replace and have notified them about this. So will the usb port work till next week or could it die in hours or days?
imlgl said:
My phone is also having a similar experience. I running an AOKP rom so it keeps charging instead. How long will the usb port work for. It's being sent back to Samsung to have the screen replace and have notified them about this. So will the usb port work till next week or could it die in hours or days?
Click to expand...
Click to collapse
I'm not sure how someone on a different continent than you can possibly answer a question about the state of the USB port on your phone and how long it will last.
ctomgee said:
By "those things" I'm guessing you didn't actually replace the part for the USB port. Just the cleaning steps?
That image is "desk clock" mode. It gets activated when certain pins in the USB port are shorted with a specific resistance. If you thoroughly cleaned the port as best you could, and are getting random desk clock mode and still randomly getting the charging paused message, then I'd say your USB port is dying a slow death. You'll need to get the part replaced.
From what I hear the part itself is pretty cheap (like $15) and not hard to replace. I don't know if O2 will do it for you though, since you didn't actually buy the phone from them. You can try... but I doubt it, since it was a second hand purchase. Or just take it to a local cellular repair shop.
Click to expand...
Click to collapse
hmm i'll have to look into it then. no idea where to start buying parts and where to take it to repair.
will have to do some research
It can by caused by humidity too in my opinion. Had this problem few times. My friend had too. It was gone after putting out battery for few hours in warm place. Even when I was keeping my phone in locker at roofed swimming pool it was happening.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
ctomgee said:
I'm not sure how someone on a different continent than you can possibly answer a question about the state of the USB port on your phone and how long it will last.
Click to expand...
Click to collapse
I'm going on average, like how long would be last. Roughly. Mine's been doing it for the past 3 days.
imlgl said:
I'm going on average, like how long would be last. Roughly. Mine's been doing it for the past 3 days.
Click to expand...
Click to collapse
It depends on the severity of the damage specific to your phone. If it's damaged more severely, then not long. If it's not damaged so severely, then longer. How long it's been doing it doesn't mean anything.
ctomgee said:
It depends on the severity of the damage specific to your phone. If it's damaged more severely, then not long. If it's not damaged so severely, then longer. How long it's been doing it doesn't mean anything.
Click to expand...
Click to collapse
Well it's still charging but my pc no longer recognises it so I don't thin it's going to last too long.
ok its getting worse now. ive requested a repair from samsung.
before i send it off should i remove all my google and facebook accounts or should it be ok to leave that kind of stuff on there?
As long as it's unrooted, running stock firmware, has the flash counter reset if necessary, why would you need to remove stuff like that first ? I probably wouldn't.
Always remove personal data. Fully wipe your phone. You never know who works in service and what will di with your personal stuff. Thats my opinion.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
MistahBungle said:
As long as it's unrooted, running stock firmware, has the flash counter reset if necessary, why would you need to remove stuff like that first ? I probably wouldn't.
Click to expand...
Click to collapse
what are they gonna do if its rooted?
i dont have warranty anway so im gonna have to pay for the repair
look how mental the battery is being.
having to back up things through airdroid cos i cant use the usb now
If rooted they CAN cancel warranty.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
I got a brand new s2 two and a half weeks ago, 1 week ago when unplugging my charger it sort of went crazy bringing up the car mode, desk clock, charging when it wasn't and the voltage too high popup every 30 seconds. I took it back and they exchanged it straightaway however i have had this one for 3 days and its done exactly the same thing. I rooted and installed a custom rom on the first but left the second totally stock. It also happened to the girlfriends note too.....
Luckily i haven't had the phone for a month yet so i'm still entitled to an exchange but this has put me off samsung and i'm thinking of an alternative if they'll allow me to take a different handset.
Sent from my GT-I9100 using xda premium
I've just been given two non functional i9300's for free, to see if i can repair them.
both have cracked screens, one appears to have water damage.
i've tested with spare batteries, and neither powers on, nor do they show up in windows when connected by USB.
whats the bare minimum we need for these to power on and be detected by windows, so i can determine if the logic boards in these even work?
Mussels84 said:
I've just been given two non functional i9300's for free, to see if i can repair them.
both have cracked screens, one appears to have water damage.
i've tested with spare batteries, and neither powers on, nor do they show up in windows when connected by USB.
whats the bare minimum we need for these to power on and be detected by windows, so i can determine if the logic boards in these even work?
Click to expand...
Click to collapse
Cracked screen and water damage will not cause the phone to not boot up. Unless the water damage is severe, it will still boot up. It appears to me tat it is either sds or motherboard.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
Cracked screen and water damage will not cause the phone to not boot up. Unless the water damage is severe, it will still boot up. It appears to me tat it is either sds or motherboard.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
the previous owner has disassembled them, and they had no batteries. using one from an i9305 has had no luck so far, basically just looking for advice and suggestions as where i should proceed.
if it was a PC i'd be done in seconds but fixing a phone i didnt pull apart in the first place is challenging.
Mussels84 said:
the previous owner has disassembled them, and they had no batteries. using one from an i9305 has had no luck so far, basically just looking for advice and suggestions as where i should proceed.
if it was a PC i'd be done in seconds but fixing a phone i didnt pull apart in the first place is challenging.
Click to expand...
Click to collapse
If we do not know why the phone is not booting up, we cannot tell u which part to change.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
If we do not know why the phone is not booting up, we cannot tell u which part to change.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yeah thats the same situation i'm in.
at the very least, one of the boards is showing 5W of power consumption when connected to a wall charger (which is connected to a power meter).
since the battery is charging, that implies something is working - but i'm getting nothing on the screen and not hearing sounds out of the speaker.
Mussels84 said:
yeah thats the same situation i'm in.
at the very least, one of the boards is showing 5W of power consumption when connected to a wall charger (which is connected to a power meter).
since the battery is charging, that implies something is working - but i'm getting nothing on the screen and not hearing sounds out of the speaker.
Click to expand...
Click to collapse
Is tat the water dmged one or?
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
Is tat the water dmged one or?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i cant tell which board came from which shell unfortunately, however this board/battery is charging in the water damaged shell, but showing 0W in the 'clean' shell.
backwards to what i'd expect. maybe this ones just a dead screen, and the other has some more serious, but better hidden damage.
edit: the 'water damaged' shell + board had a red charging LED show up, that went away when i hit the power button. didnt power on after that/the touchscreen buttons dont light up when touched.
edit 2: with my good battery the LED went blue and the backlit buttons lit up. i think this hardware combo works, and i just need a new LCD - will trst it out with MHL and see if that works...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
looks like this combo just needs a digitiser + LCD, despite getting an image on screen i cant control it in any way.
thanks for the help jelly, you at least helped me think this one through and come up with viable testing methods.
Mussels84 said:
looks like this combo just needs a digitiser + LCD, despite getting an image on screen i cant control it in any way.
thanks for the help jelly, you at least helped me think this one through and come up with viable testing methods.
Click to expand...
Click to collapse
Welcome
Sent from my GT-I9300 using xda app-developers app
so using that test above (wall meter then MHL) i've confirmed that one board works, one doesnt. in either frame one board lights up the LED and the other doesnt draw any power or give any sign of life (assuming this is the water damaged one)
i've got one of everything (front + back camera module, speaker etc) literally all im missing is a LCD screen.
to ebay i go, this has been a good day
this just got hilariously fun.
i ended up temporarily using the LCD + digitiser from my i9305 (it works but hte back panel cant be closed) to sync up a bluetooth mouse to the phone.
now i can use it as a bluetooth controlled HTPC