I have downloaded the app from eclips3 and have tried rooting my phone..when i go to reboot my phone and holding down vol down plus pwer key my phone does not read the PB00IMG.zip file, eclips3 has been a lot of help but we have ran out of ideas. Does anyone else have any ideas of how to root my phone or put a ROM on it?
1. try a new sd card
2. make sure you have at least 50 % battery life...
3. Re download the image..
if not...go to verizon n tell them you cant root your phone.. LOL! jk...
hope someone else knows what to do...
lol thanks..do you think verizon will help me root it?? lol jk;-)
do you have the PB00IMG.zip in the root of your sd card (not in any other folders?)
The Beginning
You are going to need the Android SDK installed and working as we all the latest version of Java.
Extract and run ‘SDK setup.exe’ . You can find a quick setup on the download page for Android SDK.
Make sure you install the SDK for 1.5, 2.1 and USB Driver package (to make it easy just click to install all).
Put your phone into USB debugging mode: Settings > Applications > Development > check USB Debugging
Connect your phone to your PC
Open device manager on your PC, the device with the yellow exclamation mark next to it is your phone.
Right click on the device and click ‘Update Device’. Find and locate your Android SDK directory and find the ‘USB Driver’ Folder. If you can’t find the USB Driver folder then you didn’t install the USB Driver Package.
Once your Device driver is updated you can continue on to the next step: Rooting your phone.
Rooting Your Phone
Download PB00IMG.zip
Place PB00IMG.zip into the root directory of your SD Card. (Thats right inside your SD Card, not inside any other folders.)
Power down your phone.
Turn your phone back up by holding down the ‘down volume’ and the power on keys at the same time. It should bring you to the HBOOT screen. When it says Push Activate you have to push down on your trackball. The process will take about 10 minutes, and when your phone starts back up it will take quite a bit longer than usual.
Your Phone is now rooted!! (That was the easy part)
Install Recovery Image
Be sure your phones SD card is not mounted to your computer before you start anything.
Download Recovery.zip
Extract file contents to your \tools\ directory of your Android SDK.
Open up a command prompt and go to your tools directory (‘cd …./android-sdk-windows/tools’ or where ever your directory is but cd is the change directory command) , and execute these commands:
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery.img
You now have a recovery partition on your phone, you can access it by going into recovery mode on your phone (volume up + power on).
Install new rooted ROM
Download eris21official-root.zip
Copy eris21official-root.zip into the root directory of your SD Card.
Reboot your phone into Recovery Mode. (power down your phone and turn it back on with volume up and power button)
Go to Wipe, and do a wipe of data/factory reset, as well as dalvik-cache wipe.
Go back to the main menu and select “Flash Zip from SDcard”. You should see your eris21official-root.zip, select it and press the track ball to flash it.
You are now done and are running the latest version of the root rom. Remember these last step because they are the steps you will be using to use other ROMS or to update.
Click to expand...
Click to collapse
if you follow those steps step by step then it should work... its exactly what i did and what a lot of other people have done
for custom roms just find the rom you would like to try and follow the 'install new rooted rom' steps
i have downloaded and set up the sdk but i dont have a yellow triangle with an explanation point on my device manager..my phone is in debugging mode. I have just tried over and over copying the PB00IMG.zip file to my sd card and it still doesnt read it. It just says trying to read image PB00DIAG.img and a few others and says no image then goes straight to the hboot screen.
naenaek22 said:
i have downloaded and set up the sdk but i dont have a yellow triangle with an explanation point on my device manager..my phone is in debugging mode. I have just tried over and over copying the PB00IMG.zip file to my sd card and it still doesnt read it. It just says trying to read image PB00DIAG.img and a few others and says no image then goes straight to the hboot screen.
Click to expand...
Click to collapse
I'm rooting right now (my third Eris, actually) and it does that. You need to agree to updating by pressing volume up or down (don't recall which one, the screen will tell you, though..). It looks like it wants you to run through the first step all over again but it's not, the second time is the actual installation of the .zip on your sdcard.
-mak
it says my drivers are up to date when i click update drivers...so now i am stuck trying to root my phone..the problem i am having there is i cant get my phone to read the PB00IMG.zip file from the hboot screen.
lg optimus s
can this phone be rooted
tlove008 said:
can this phone be rooted
Click to expand...
Click to collapse
First, this post doesn't belong here as this is the HTC Droid Eris forum. Your phone isn't even an HTC brand. I looked and saw that XDA doesn't have a section for an LG Optimus S so I would guess not, personally. Perhaps you should try Google?
Good luck.
Related
I've tried about a million times now and can not get my Gtab into clockwork recovery. I downloaded the internal version of clockworkmod and hooked my gtab up to the computer and placed the clockworkmod zip in the recovery folder and unzipped it. Then I turned my device off and held down the power button + vol + it then says "Recovery key detected" and acts like its installing. Then It reboots and I turn it off again and it just keeps doing the same thing saying "
recovery key detected" and won't boot into clockwork!!!! Advice please?? And I know this is a noob question, I do. I tried following the instructions on the stickies but they're vague as to which clockwork zip I am to download??? Please help. Thanks!!!
From what I gather, after you download the internal zip you unzip that so you see the update.zip file & recovery folder. You move both of those to the root of the g-tab which would be /sdcard. I haven't done it yet since mine is charging right now.
Trying it now
GOLDEN....Finally! Thank you sir!
peurifoyd said:
I've tried about a million times now and can not get my Gtab into clockwork recovery. I downloaded the internal version of clockworkmod and hooked my gtab up to the computer and placed the clockworkmod zip in the recovery folder and unzipped it. Then I turned my device off and held down the power button + vol + it then says "Recovery key detected" and acts like its installing. Then It reboots and I turn it off again and it just keeps doing the same thing saying "
recovery key detected" and won't boot into clockwork!!!! Advice please?? And I know this is a noob question, I do. I tried following the instructions on the stickies but they're vague as to which clockwork zip I am to download??? Please help. Thanks!!!
Click to expand...
Click to collapse
Hmm?.. I think the issue you are having is moving the update zip into the recovery folder.
when you extract the files from the zip file extract them to the main directory "/SCARD" and thats it.
After you extract it you should see (in that directory) a folder that says "Recovery" , within that folder there should be a file named "Command" and thats it, no more files in there.
Also in that main directory you should see an "update.zip" file, leave it there. DON'T MOVE IT into the recovery folder.
from there follow directions to boot into recovery mode.
1) Power down
2) Press and Hold down volume up + rocker
3) Press and hold Power Button
4) when device powers on you will see "Recovery Key Detected"
5) release buttons
6) recovery will install and reboot as normal.
7) Power down and follow steps 1 through 5 again.
8) You should be in recovery mode now.
Edit:
Took too long to make this post!! LOL
my noob questions...what version did you use and can you post a link to it?? i am getting my g tab today!!
thx...
Follow the instructions on this link.
http://forum.xda-developers.com/showthread.php?t=865245&highlight=clockwork
Rumbleweed said:
Follow the instructions on this link.
http://forum.xda-developers.com/showthread.php?t=865245&highlight=clockwork
Click to expand...
Click to collapse
thx. i'm up n runnin vegan 5....
Tekrhino, I feel stupid but I have to ask for your help re: this same issue. It seems so clear on what to do from your instructions but I still can't get clockwork recovery to load. I'm having the exact same issue of not getting into clockwork recovery so I must be doing something wrong.
Maybe by telling my steps you can get me on the right path.
1. Downloaded clockwork mod to desktop.
2. extracted update.zip now I have a file that says update unzipped.
3. attached gtab to usb, recognized by computer as removable disk.
4. click on "open folder to view files and see list of different files on gtab
5. copy and paste recovery and update unzipped to this window and disconnect gtab from computer and then try to do the above mentioned steps to get into recovery. get the recovery key is detected message but can't get into clockwork recovery.
I must be doing something wrong but can't figure out what! Any suggestions that can point out the error of my process will be very much appreciated.
GGGwhatever!!
You don't need to unzip update.zip. You just put it in the /sdcard directory and the reboot to CWM and take the CWM options to run it.
Rev
Download CWM to your computer.
Uncompress it get two files (recovery and update.zip) Do not unzip update.zip
put these two files in your root directory on your Gtab ( SDCARD)
Hold Vol+ button turn on.
Sit back and watch
GGGTABBB! said:
Tekrhino, I feel stupid but I have to ask for your help re: this same issue. It seems so clear on what to do from your instructions but I still can't get clockwork recovery to load. I'm having the exact same issue of not getting into clockwork recovery so I must be doing something wrong.
Maybe by telling my steps you can get me on the right path.
1. Downloaded clockwork mod to desktop.
2. extracted update.zip now I have a file that says update unzipped.
3. attached gtab to usb, recognized by computer as removable disk.
4. click on "open folder to view files and see list of different files on gtab
5. copy and paste recovery and update unzipped to this window and disconnect gtab from computer and then try to do the above mentioned steps to get into recovery. get the recovery key is detected message but can't get into clockwork recovery.
I must be doing something wrong but can't figure out what! Any suggestions that can point out the error of my process will be very much appreciated.
Click to expand...
Click to collapse
I just got my tablet today and am still playing around with the stock, but from what I read I think your mistake is unzipping the "update.zip" file.
You only unzip the clockwork mod file you downloaded. Then you have two files: 'update.zip' and 'recovery' (folder). Leave the update.zip alone, don't unzip it and put these two files onto your gtab. Either internal storage (sdcard) or microsd card (sdcard2), depending on which clockwork file you have.
Thanks Rev! I know it is something simple but it was what I needed to get started.
Now I can play!
Newbie possible screwup
Help, followed install for Cwd and all get is the recovery reconized and it just stays on theviewsonic open page. Willnot go any further it is stuck.
I messed up the G Tablet soon after receiving it.
Here are two links with information on how to get it restored.
Viewsonic GTablet For Dummies
Guide - Restore G Tablet after a failed Recovery Mode update
Hope this helps.
djab67
(If I have helped, please hit the "Thanks" button)
I have an S-OFF HTC Incredible S 4G running 2.3.3 trying to get it rooted, I am trying to keep up but so use to stupid iPhone modding/themeing so just lost on how to send or use my SD card for ROMS? Can I just use the old word (shsh) files over to my phone while its plugged in its the Fdisk and do I put the files into 'root', I have installed Superuser app/ROM Manager app onto my phone also have Gingerbreak.v.120apk on my desktop plus Superuser.apk am I lost or what and anyone willing to help but go easy on me?
Thanks, TheCrow
Do you have ClockworkMod Recovery installed?
I have ROM Manager installed off the Market but my question is probably the one that I'm can't get the answer for which is, how do I transfer things onto my SD card cuz I have played a lot with my old iPhone 4 with mods/themes and so on but never had to write to my SD card atleast I don't think I did thats why I ask if its as easy as dragging and dropping files over to my phone while its plugged into my computer as 'use as driver'? I can't even get the CWM to work properly because it says something about 'special privillages', I have S-OFF but just want to get rooted so I can move on to the fun . Do I need something set on my phone or installed to get going, I also put Superuser & Astro on my phone from the Market so can if you have the time just give me a few dumby steps to point me in the right direction and I am over at the Android Newzealand site which is awesome but they get most files from here and only one guy is trying to help
Thanks, TheCrow
@Crow1372
I am all about trying to get things done in the easiest way possible to help the people that are new to Android.
This method has worked for me but there is no guarentee that it will work for you and I am no way responsible for anything that happens to your device.
DO THE ROOTING PROCESS AT YOUR OWN RISK
Procedure to Root HTC Incredible S
1. Install the ADB on your computer, but before that you will have to turn on the USB debugging in your incredible S which can be turned ON by pressing the “Menu” key first then “Settings” > “Applications” > “Development”. Now here you will find an option of “USB debugging”, select the option and just accept the warning which it will pop up. It’s very important to put the device in the USB debugging and also important to go through the ADB setup process without which it’s not advised to proceed.
2. Now you will have to download the Rooting package which you will have to unzip the same and need to place in the location path c:\adb after which you will have to connect the phone to the computer.
3. Now, open the command prompt and key in the “cmd” and then you will have to make use of the change directory command so that the directory in which you have placed the rooting file can be accessed.
4. Next type in the “pushroot” and enter the same, basically this will push in the pushroot.bat file.
After this type in adb shell /data/local/tmp/getroot and after that type in adb shell and press enter.
After typing in the above commands, you will now be prompted as # after which you will have to type in /data/local/tmp/pushroot.
That’s it you have now successfully rooted the HTC Incredible S
TheCrow1372 said:
I have ROM Manager installed off the Market but my question is probably the one that I'm can't get the answer for which is, how do I transfer things onto my SD card cuz I have played a lot with my old iPhone 4 with mods/themes and so on but never had to write to my SD card atleast I don't think I did thats why I ask if its as easy as dragging and dropping files over to my phone while its plugged into my computer as 'use as driver'? I can't even get the CWM to work properly because it says something about 'special privillages', I have S-OFF but just want to get rooted so I can move on to the fun . Do I need something set on my phone or installed to get going, I also put Superuser & Astro on my phone from the Market so can if you have the time just give me a few dumby steps to point me in the right direction and I am over at the Android Newzealand site which is awesome but they get most files from here and only one guy is trying to help
Thanks, TheCrow
@Crow1372
Click to expand...
Click to collapse
Try reflashing CWM Recovery. Since you have S-OFF, it should work. If you get it to work, then flash (install zip from SD in CWM) the attached file and you should be rooted.
Theonew said:
Try reflashing CWM Recovery. Since you have S-OFF, it should work. If you get it to work, then flash (install zip from SD in CWM) the attached file and you should be rooted.
Click to expand...
Click to collapse
I appreciate the one above yours and kinda understand it but waaay too indepth maybe, I also tried yours but when I go to HBoot menu and Recovery to look for the .zip file it is no where and I plugged my device into computer and 'debugging Enabled' also set my connection as 'disk drive' to load the file to my SD card but still can't find it?? I can't believe it is this hard cuz I see many others rooted and flying away on their Incredible S 4G, I was able to get the Gingerbreak.v.1.20apk on my device but it just keeps loading and saying that it will reboot once successful but after 20-30mins I figured it was not going to work also I have ROM Manager installed already but as you know no Superuser previlliages yet so can't load CWM
TheCrow1372 said:
but as you know no Superuser previlliages yet so can't load CWM
Click to expand...
Click to collapse
Have you tried searching for the zip when your device is NOT connected to your pc? And just so you know, you do NOT need superuser privileges (root) to be able to use ClockworkMod especially since you already have S-OFF. Have you tried flashing a different version of ClockworkMod? You could try using this: http://forum.xda-developers.com/showthread.php?t=794638 to flash it from your PC.
Theonew said:
Have you tried searching for the zip when your device is NOT connected to your pc? And just so you know, you do NOT need superuser privileges (root) to be able to use ClockworkMod especially since you already have S-OFF. Have you tried flashing a different version of ClockworkMod? You could try using this: http://forum.xda-developers.com/showthread.php?t=794638 to flash it from your PC.
Click to expand...
Click to collapse
I'll try finding it without being plugged in to pc, I put Gingerbreak.v.1.20apk on my SD card no issues so I shouldn't have an issue putting the CWM on but do you have a newer version (sorry) also do you think one of my issues is that I have a CWM on my 'Astro' file finder but the files say they don't exist so should I delete it and start over with a newer one that you may have and should I take of ROM Manager until I finish putting these files in cuz it should not be this hard others are rooted on their Incredible S 4G 2.3.3.
TheCrow1372 said:
so I shouldn't have an issue putting the CWM on
Click to expand...
Click to collapse
Please explain this. Here's the image: http://downloads.unrevoked.com/recoveries/cwm-4.0.1.4-vivo.img .
I can't open that image, my Winrar is acting up can you explain the image please (sorry)?
Also when I go to my 'Programs' on my computer 'Uninstall' it shows the SDK Tools with an 'X' beside it like it did not fully install, I don't know if I really need the ADB & SDK tools but I'll keep trying that later but I want to try your methods as well cuz as I mentioned it should not be this hard to root my phone right but I have to go to Doctors so I will check in later and keep trying
TheCrow1372 said:
I can't open that image, my Winrar is acting up can you explain the image please (sorry)?
Click to expand...
Click to collapse
You are not supposed to open the image. Download Android Flasher, connect your device to your pc, run Android Flasher, select recovery (at the side), find the image file you downloaded, select it, click ok (and again if necessary), and it'll do the rest.
Question, I drag and drop files over to my phone while plugged in to my SD card but everyone says to the root folder I just don't have a 'root' folder so one guy said to drop the files into the very first one and that is what I did with Gingerbreak.v1.20apk but it just says its rooting and will reboot device when done? After 3 attempts each at 15-25mins the wheel is still spinning so am I putting it in the right spot, Gingerbreak does show up in my apps drawer but the unzipped versions of CWM or Superuser never show up on my device even when I go to 'recovery' through Revolutionary to unzip it?
TheCrow1372 said:
Question, I drag and drop files over to my phone while plugged in to my SD card but everyone says to the root folder I just don't have a 'root' folder so one guy said to drop the files into the very first one and that is what I did with Gingerbreak.v1.20apk but it just says its rooting and will reboot device when done? After 3 attempts each at 15-25mins the wheel is still spinning so am I putting it in the right spot, Gingerbreak does show up in my apps drawer but the unzipped versions of CWM or Superuser never show up on my device even when I go to 'recovery' through Revolutionary to unzip it?
Click to expand...
Click to collapse
Did you read/understand my previous post?
Kinda but how does that have anything to do with rooting my Incredible S (sorry) its just that I'm new to HTC devices and I've been told that I have to be rooted to put ROM themes on my device and I have S-OFF, thats not enough is it? I tried the guy above yous method of ADB but my computer does not 'recognize that path', I did exactly what his video says but again is either of these methods going to get me 'rooted cuz all I want to do is start enjoying my phone plus your saying I don't have to have 'Superuser Permissions' to use CWM?? Sorry bro if I'm being difficult but I just want to be rooted already and have you heard of this angermod or what ever its called, like Gingerbreak or something?
HELP PLEASE lol, thanks
Forget about Gingerbreak. The tool (and instructions) is to flash the custom recovery (ClockworkMod) to your device. I said this before, and I'll say it again, using ClockworkMod recovery DOES NOT require root. You are going to root your device by using Clockwork to flash the file attached in post #5. After flashing that file, your device will be rooted.
When I go to extract it they ask for a gehroot password, I copied what looks like a password under my Incredible S/Vivo but that one did not work for the CWM download
I will try this tomorrow 4 sure and thanks for your patients, fill you in when I'm rooted (hopefully) Also is there a special password to download the CWM for my Incredible S/Vivo, sorry again?
One more question (sorry) the one I did download the other day was supposed to be CWM but it has all kinds of other files with it like 13 files including 'SuperOneClick' also suv1/v2/v3 plus 'busybox' but don't see cwm anywhere so anyway do I use the 'Android Flasher' and flash all of them like the whole folder or each one individually?
In the CWM image file, there are like 13 files that came with it like suv1/v2/v3 plus busybox and SuperOneClick so which or all of these files do I flash with Android Flasher?
Facts:
Laptop connected to my phone uses Ubuntu linux
Unlocked my Amaze successfully
I have the RecoveryInstallerForNoobs2.0
I have chmod'ed all the pertient files to be executable
With phone in fastboot mode, doing 'sudo ./fastboot devices' returns the serial number
Problem:
'sudo ./Flash.sh' returns the following output:
./Flash.sh: 1: adb: not found
: not found 2:
Additional facts:
I am a n00b and I am aware my life's output at age 32 is dismal
I have read the "read first for linux..." thread, "how to root" thread and the "faq before posting" thread
I have searched the site but possibly not hard enough, ergo my own impudent thread
What to do??
Is debug on in your phones settings?
Sent by accident from my Amaze using Tapatalk
Double0EK said:
Is debug on in your phones settings?
Sent by accident from my Amaze using Tapatalk
Click to expand...
Click to collapse
what he said turn on debugging on your phone. also make sure the zip file is unzipped into a folder
Debugging is on in the settings and the recovery for noobs zip is unzipped.
I flashed mine manually using the fastboot command...
But I only know how to do it with a windows machine.
Put the recovery.img in your AndroidSDK/tools folder , open cmd , cd to the tools folder and type "fastboot flash recovery recovery.img" being if you renamed it to recovery.img..(if it wasn't renamed then you need to type the name of the recovery img.)
Sent by accident from my Amaze using Tapatalk
ryurage said:
Debugging is on in the settings and the recovery for noobs zip is unzipped.
Click to expand...
Click to collapse
don't go to fastboot, the script should automatically kill and restart the adb shell...just turn on your phone and run flash.sh... if that doesn't work Rename the shellscript from flash.sh to flash.command, then associate it with Terminal.app
let me know if those work, if not, I've got some other tricks but it's a little bit more complicated.
@seansk, I renamed the file and tried it with the same resulted output:
./flash.command: 1: adb: not found
: not foundmand: 2:
Btw, I run the flash script one of two ways, 1. sudo ./flash.command or 2. bash flash.command
I could be wrong but I think the issue possibly lies in the script:
adb kill-serveradb reboot bootloaderfastboot flash recovery recovery-cwm-ruby-5.0.2.7.imgfastboot rebootexit
Perhaps adb has to be in my PATH? I'm open to other suggestions too.
One more thought, assuming the adb daemon is shut down, maybe this command would do it: 'sudo ./fastboot flash recovery recovery-cwm-ruby-5.0.2.7.img'?
hmm that thing has been up for months...I've only had two people having trouble and havn't heard back from the other guy...so I hope there's nothing wrong with the scrip...I will look into it again...unfortuantely my vitual machine for mac is down right now, don't know when I'll get it back up and running...
try these
1)To start the shell-script 'file.sh':
sh file.sh
bash file.sh
2)Another option is set executable permission using chmod command:
chmod +x file.sh
Now run .sh file as follows:
./file.sh
ultimately if you have a windows computer it would be much easier...or if you can also here's the new recovery from xboarder I havn't updated this zip file yet... you can edit the recovery script to change the name to this file name: recovery-cwm-ruby-5.5.0.4.img
if all else fails follow the second method here from xboarder (you need an sd card): http://forum.xda-developers.com/showthread.php?t=1316855
Download file to your computer
2. make sure its named PH85IMG.zip
3. Copy to sdcard (external one) then restart your phone in fastboot, by holding down the volume down and power.
4. Wait for it to say do you want to update (press volume up)
5. Press power button to reboot
6. Reboot Phone into recovery as normal and enjoy clockworkmod recovery with fixed charging and sdcard
Please help. I just want to reset to anything that will work. I have access to CWM. I have deleted all backups (I know...) I have WSG Rom and Wooky (which doesnt like CWM) on the internal SD card. I can't stop getting bootloader loops. I have made some mistakes trying to fix this. I just want anything (ADB or whatever) that will get me to a working tablet. I know this is vauge, please help. WHen I flash WSG it goes to the ASUS screen with the circle that keeps flashing as it rotate- not the image below. I have tried reading about fastboot, which I can enter, but I am unsure how to use it.
...
No this is an easy fix after you do a bit of reading! You need to fastboot flash TWRP and then WIPE and then push a rom to your device through adb.
You'll find TWRP in the development section, I'm guessing your on the stock bootloader (not androidroot), if so read back a couple of pages in the thread and you'll find a link to their older versions. On the first post you'll find a link to their website where you'll find instructions to fastboot flash their recovery.
Also in development section you'll find a thread called How To Un-Brick Your Prime. In there you'll find downloads and instructions for both ADB and Fastboot.
Reading a bit through these post you will learn alot and easily unbrick your device now, and the next time your in trouble.
Hope this helps....
I suggest you go here first http://forum.xda-developers.com/show....php?t=1426502 download and install naked drivers
Then go here http://forum.xda-developers.com/show....php?t=1774352 download and unzip nvflash
Then go here http://forum.xda-developers.com/show....php?t=1615990 download twrp and place it inside the nvflashpack directory where you see adb.exe
Then go here http://forum.xda-developers.com/show....php?t=1782413 download EOS 3
or
Go here http://rootzwiki.com/topic/32357-rom...ckbean-2-8-15/ and download bakedbean 3
Put either one in the nvflashpack directory where adb.exe is or if you have an external sdcard, load a rom onto it (preferred method)
I am not a fan of cm10 though it has some nice features I wouldn't start with it...
Now the hard part....
Go here and follow the instructions http://androidroot.mobi/t3_nvflash/
As per the instructions put your prime in fastboot mode...
to you start a command prompt, open the nvflashpack directory where adb.exe is. Press and hold shift while right clicking in the window, select open command prompt here
When the instructions say to enter a command, highlight it on the webpage and copy then in your command window right click and paste (control V does not work here)
Work your way all the way to the end until you see coming soon...
In the end you will have the modified bootloader required for the latest version of twrp (cwm doesn't work as well as twrp on the prime)
Now follow the instructions to install twrp this can be done through fastboot or through goo manager (download from market if you want to go the goo manager route)
Once that is complete with the prime still plugged into the pc, boot into twrp, now depending on if you have put the rom on an external sd card or not... if on sdcard, have it inserted before going into twrp, and install the rom from the card otherwise you can adb push the rom to the prime it will be adb push /name of rom.zip/ sdcard Note that the rom has to be in the same directory as adb.exe for this to work otherwise you need to type the path....for the name of the rom I suggest right clicking the file, go to properties and copy the name, then right click and paste in the command window... this eliminates mistakes.. and don't forget the.zip part.. the push will take about 5 minutes...
Then install the rom from twrp.....
Hi Guys,
I'm hoping someone can help me here with unbricking my daughters Nabi 2 tablet.
The long story short is that I've tried to update to the latest OTA with TWRP 2.3.3.0 (Nabi 1.9.37) and gapps installed in the past (in order to have google play services).
After downloading the OTA and successfull file verification it booted into TWRP mode and this is when things went wrong...
As I wasn't sure about how to even leave the TWRP mode I have hit few things by accident (I think one of them asked me if I want to wipe my ROM and I said YES + when I was after that trying to reboot the tablet it gave me a warning saying something like "you have no OS installed - are you sure to reboot?).
Now, of course due to my stupid actions it doesn't work - stuck on Nabi boot logo and when I try to pres Volume+ and Power together it gives me the screen with 4 options to choose from (Boot Normally, Fastboot Protocol, Recovery Kernel, Forced Recovery) but I still can't select/move the highlighted item. All what I'm able to do now is to power it off by holding the power button pressed for couple seconds.
Based on your experience here - is there anything that can be done or is it a "real brick" and we need to buy something new for her?
Thank you for any suggestions.
Hi,
I managed to boot into TWRP somehow...
Could someone please direct me how I can re-flash it with a Nabi 2 UK OS (and where I can source the file from if possible at all)?
Cheers,
T1000
termostat1000 said:
Hi,
I managed to boot into TWRP somehow...
Could someone please direct me how I can re-flash it with a Nabi 2 UK OS (and where I can source the file from if possible at all)?
Cheers,
T1000
Click to expand...
Click to collapse
Try sections 9 and 10. http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
Hi,
Using NabiLab I managed to load stock 1.9.37 through TWRP.
At the moment tablet will start, let me through the initial setup wizard and go into normal mode from when it was new (no Google services available).
When I try to install gapps (TWRP mode) using NabiLab it goes into endless boot loop showing just a splash screen of the screen lock and reloads again.
I tried also bringing it more to factory condition but it is not recognised in NabiLab when android is fully booted (even though PC can see it). I tried different drivers but without too much luck. When in TWRP mode it comes up as Alcatel ADB Device and when adroid is booted it comes up as a storage device rather than ADB.
I feel I'm pretty close but I need just a hint how to solve it finally without bricking it for real...
Cheers
T
termostat1000 said:
Hi,
Using NabiLab I managed to load stock 1.9.37 through TWRP.
At the moment tablet will start, let me through the initial setup wizard and go into normal mode from when it was new (no Google services available).
When I try to install gapps (TWRP mode) using NabiLab it goes into endless boot loop showing just a splash screen of the screen lock and reloads again.
I tried also bringing it more to factory condition but it is not recognised in NabiLab when android is fully booted (even though PC can see it). I tried different drivers but without too much luck. When in TWRP mode it comes up as Alcatel ADB Device and when adroid is booted it comes up as a storage device rather than ADB.
I feel I'm pretty close but I need just a hint how to solve it finally without bricking it for real...
Cheers
T
Click to expand...
Click to collapse
Pretty hard to brick a Nabi2.
Why did you choose 1.9.37? Isn't the latest 2.3.2 and already has Gapps?
When in Android do you have ADB turned on in Developer options?
Is this the procedure you used?
a) Download the ROM for your device in section 10
b) Boot to TWRP (see above for instructions)
c) Do a backup of just the boot partition in TWRP.
- Click Restore tab
- Just check "boot" and nothing else.
- Swipe to Backup
d) Eject the external SD from the tablet and place in the computer
- Note: You should unmount the card from the mount tab in TWRP before ejecting it. (Uncheck the box next to external SD)
e) Connect the SD card to you computer
f) On the SD card navigate to the folder TWRP/BACKUPS/XXXX. XXX is a serial number unique to your Nabi.
g) Make a new folder and call in whatever you want. So it should now look like TWRP/BACKUPS/XXX/yourfolder
h) Unzip the ROM file you downloaded in to the "yourfolder" you created above. The files should look like ext4.system.win, emmc.boot.win, ext.addon.win, etc. Inside the the "yourfolder" directory.
i) Download the bootloader zip for your device from section 10
j) Copy it to the external SD in a location you will remember. This will be for the bootloader update.
k) Eject the SD card from your computer (safely eject it)
l) Install SD card in Nabi
- After inserted in tablet go to TWRP mount tab and check the box to mount the SD card
m) Go to restore tab, and find the backup under the "yourfolder" you made and unzipped the files to.
n) You should be able to select boot, system, and addon and skip the others.
o) If everything restores then go to TWRP install tab, find the bootloader.zip you downloaded and install it.
p) Reboot
Code:
[U][B]Nabi2 Original United Kingdom (NABI-NV7A-UK)[/B][/U]
Version 2.3.2[URL="https://www.androidfilehost.com/?fid=24269982087011751"] Download[/URL]
ROM Mirror[URL="http://www.nabtabhacks.com/downloads/232UKstock.zip"] Download[/URL]
Bootloader [URL="https://www.androidfilehost.com/?fid=24269982087013995"] Download[/URL]
aicjofs said:
Pretty hard to brick a Nabi2.
Why did you choose 1.9.37? Isn't the latest 2.3.2 and already has Gapps?
When in Android do you have ADB turned on in Developer options?
Is this the procedure you used?
a) Download the ROM for your device in section 10
b) Boot to TWRP (see above for instructions)
c) Do a backup of just the boot partition in TWRP.
- Click Restore tab
- Just check "boot" and nothing else.
- Swipe to Backup
d) Eject the external SD from the tablet and place in the computer
- Note: You should unmount the card from the mount tab in TWRP before ejecting it. (Uncheck the box next to external SD)
e) Connect the SD card to you computer
f) On the SD card navigate to the folder TWRP/BACKUPS/XXXX. XXX is a serial number unique to your Nabi.
g) Make a new folder and call in whatever you want. So it should now look like TWRP/BACKUPS/XXX/yourfolder
h) Unzip the ROM file you downloaded in to the "yourfolder" you created above. The files should look like ext4.system.win, emmc.boot.win, ext.addon.win, etc. Inside the the "yourfolder" directory.
i) Download the bootloader zip for your device from section 10
j) Copy it to the external SD in a location you will remember. This will be for the bootloader update.
k) Eject the SD card from your computer (safely eject it)
l) Install SD card in Nabi
- After inserted in tablet go to TWRP mount tab and check the box to mount the SD card
m) Go to restore tab, and find the backup under the "yourfolder" you made and unzipped the files to.
n) You should be able to select boot, system, and addon and skip the others.
o) If everything restores then go to TWRP install tab, find the bootloader.zip you downloaded and install it.
p) Reboot
Code:
[U][B]Nabi2 Original United Kingdom (NABI-NV7A-UK)[/B][/U]
Version 2.3.2[URL="https://www.androidfilehost.com/?fid=24269982087011751"] Download[/URL]
ROM Mirror[URL="http://www.nabtabhacks.com/downloads/232UKstock.zip"] Download[/URL]
Bootloader [URL="https://www.androidfilehost.com/?fid=24269982087013995"] Download[/URL]
Click to expand...
Click to collapse
Hi aicjofs,
I followed the steps above except step c which I haven't done.
So it looked good with the NabiLab built in 1.9.37 and it seemed to load fine with my TWRP 2.3.3.0 but it was hgoing into this endless boot loop after trying to install gapps. BTW I went for 1.9.37 as it came with NabiLab and turned right.
After your reply I've donwloaded the 232UK stock rom and bootloader. Copied both onto SD card - at that stage it would let me do a restore directly from the SD card so I've copied the 232UK rom into internal memory. Restore process went OK and at the end I've installed its dedicated bootloader...
Right now the situation is that I can only boot into TWRP but restore doesn't show any available roms (both internal or external memory) even though there is backup folder on the SD card.
What worries me the most is when I go to advanced / file manager / sdcard (internal memory) in TWRP mode it doesn't show any files or folders there. When I try to dipslpay tablet information in NabiLab it shows the external SD card properties properly (capacity/free space) but on the internal memory it says "Size df:KB Free can'tKB used find".
Does it mean it has wiped all the internal memory down to zero? Would this be the reason for recovery no being able to identify the roms on external SD card too?
Looking at the log in TWRP mode it is filled with entries like
E:Unable to mount '/data'
E:Unable to mount '/cache'
E:Can't open /cache/recovery/last_install
E:Can't open (No such file or directory)
What a pain is this thing, honestly...
termostat1000 said:
Hi aicjofs,
I followed the steps above except step c which I haven't done.
So it looked good with the NabiLab built in 1.9.37 and it seemed to load fine with my TWRP 2.3.3.0 but it was hgoing into this endless boot loop after trying to install gapps. BTW I went for 1.9.37 as it came with NabiLab and turned right.
After your reply I've donwloaded the 232UK stock rom and bootloader. Copied both onto SD card - at that stage it would let me do a restore directly from the SD card so I've copied the 232UK rom into internal memory. Restore process went OK and at the end I've installed its dedicated bootloader...
Right now the situation is that I can only boot into TWRP but restore doesn't show any available roms (both internal or external memory) even though there is backup folder on the SD card.
What worries me the most is when I go to advanced / file manager / sdcard (internal memory) in TWRP mode it doesn't show any files or folders there. When I try to dipslpay tablet information in NabiLab it shows the external SD card properties properly (capacity/free space) but on the internal memory it says "Size df:KB Free can'tKB used find".
Does it mean it has wiped all the internal memory down to zero? Would this be the reason for recovery no being able to identify the roms on external SD card too?
Looking at the log in TWRP mode it is filled with entries like
E:Unable to mount '/data'
E:Unable to mount '/cache'
E:Can't open /cache/recovery/last_install
E:Can't open (No such file or directory)
What a pain is this thing, honestly...
Click to expand...
Click to collapse
My fault. I forgot to tell you once you update the bootloader you need to use TWRP for Jellybean, you are still using TWRP for Ice Cream Sandwich .
Code:
[B][U]Nabi2 Original (NABI-NV7A)[/U][/B]
Ice Cream Sandwich TWRP 2.6.3[URL="http://forum.xda-developers.com/attachment.php?attachmentid=2586828&d=1392743412"] Download[/URL]
Jellybean TWRP 2.8.5[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3211498&d=1426404068"] Download[/URL]
KitKat TWRP 2.8.7[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3473994&d=1442276115"] Download[/URL]
Discussion Thread [URL="http://forum.xda-developers.com/showthread.php?t=2074501"]Link[/URL]
At that point you can try to restore the 2.3.2 ROM again. Or try the 2.2 ROM http://forum.xda-developers.com/showpost.php?p=50341726&postcount=85
aicjofs said:
My fault. I forgot to tell you once you update the bootloader you need to use TWRP for Jellybean, you are still using TWRP for Ice Cream Sandwich .
Code:
[B][U]Nabi2 Original (NABI-NV7A)[/U][/B]
Ice Cream Sandwich TWRP 2.6.3[URL="http://forum.xda-developers.com/attachment.php?attachmentid=2586828&d=1392743412"] Download[/URL]
Jellybean TWRP 2.8.5[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3211498&d=1426404068"] Download[/URL]
KitKat TWRP 2.8.7[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3473994&d=1442276115"] Download[/URL]
Discussion Thread [URL="http://forum.xda-developers.com/showthread.php?t=2074501"]Link[/URL]
At that point you can try to restore the 2.3.2 ROM again. Or try the 2.2 ROM http://forum.xda-developers.com/showpost.php?p=50341726&postcount=85
Click to expand...
Click to collapse
Forgive me please but I'm not entirely sure how to load this TWRP 2.8.5 for JellyBean on it with TWRP 2.3.3.0 in place..
Cheers
termostat1000 said:
Forgive me please but I'm not entirely sure how to load this TWRP 2.8.5 for JellyBean on it with TWRP 2.3.3.0 in place..
Cheers
Click to expand...
Click to collapse
You will need to use fastboot to load it. If you have a nabilab folder it already has fastboot available. So using the procedure below you couldn't download the ZIP file I linked in post above. Extract the from the zip the recovery.img or twrp-recovery.img and put it in the nabilab folder. (Im puling the procedure from http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119 )
1) To load TWRP we will be in the fastboot operational mode(see section 3)
Device powered off:
-Depending on device press and hold the power and vol - keys OR power and vol + key. Some will boot straight to recovery, and others will come to the "bootloader" screen. We want the bootloader.
-To enter fastboot use vol+ and vol- to highlight and select fastboot protocol. (Device will need to be plugged in to computer and fastboot driver installed before the screen will change)
Device powered on:
-Use ADB and execute from the command line:
Code:
adb reboot-bootloader
2) USB plugged in and Fastboot/Bootoader Driver loaded(see section 4) verify with windows device manager if needed.
3) Download the TWRP zip file for your device from TWRP list below(see section 8)
4) Extract the file to the location your are running your command prompt(see section 6)
-The file will be called twrp-recovery.img or recovery.img
5) Depending on the name of the file in step 4, load TWRP by typing at the command prompt:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery twrp-recovery.img
aicjofs said:
You will need to use fastboot to load it. If you have a nabilab folder it already has fastboot available. So using the procedure below you couldn't download the ZIP file I linked in post above. Extract the from the zip the recovery.img or twrp-recovery.img and put it in the nabilab folder. (Im puling the procedure from http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119 )
1) To load TWRP we will be in the fastboot operational mode(see section 3)
Device powered off:
-Depending on device press and hold the power and vol - keys OR power and vol + key. Some will boot straight to recovery, and others will come to the "bootloader" screen. We want the bootloader.
-To enter fastboot use vol+ and vol- to highlight and select fastboot protocol. (Device will need to be plugged in to computer and fastboot driver installed before the screen will change)
Device powered on:
-Use ADB and execute from the command line:
Code:
adb reboot-bootloader
2) USB plugged in and Fastboot/Bootoader Driver loaded(see section 4) verify with windows device manager if needed.
3) Download the TWRP zip file for your device from TWRP list below(see section 8)
4) Extract the file to the location your are running your command prompt(see section 6)
-The file will be called twrp-recovery.img or recovery.img
5) Depending on the name of the file in step 4, load TWRP by typing at the command prompt:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery twrp-recovery.img
Click to expand...
Click to collapse
Hi,
Thank you very much for your help but it clearly looks that this is way beyond my knowledge on how to use all of these fastboot, command, adb and so on...
I regret I ever touched the thing at all.
So there is absolutely no easy way - command line is a must from where I am right now?
termostat1000 said:
Hi,
Thank you very much for your help but it clearly looks that this is way beyond my knowledge on how to use all of these fastboot, command, adb and so on...
I regret I ever touched the thing at all.
So there is absolutely no easy way - command line is a must from where I am right now?
Click to expand...
Click to collapse
Its not a must but easiest to try and walk you through. Which version of Nabilab are you using? You could move some files around and still use Nabilab. Up to you which way to go forward. I'll try and help.
aicjofs said:
Its not a must but easiest to try and walk you through. Which version of Nabilab are you using? You could move some files around and still use Nabilab. Up to you which way to go forward. I'll try and help.
Click to expand...
Click to collapse
Hi,
I'm not so much afraid of copy/paste for cmd... the biggest fear is that I don't know anything about ADB, fasboot etc. So when your instruction in previous post says use ADB and I purely don't know what it means.
I think if the option is there I'd like to ask if you could help with restoring it with Nabilab.
Thanks a million for your help!
T
termostat1000 said:
Hi,
I'm not so much afraid of copy/paste for cmd... the biggest fear is that I don't know anything about ADB, fasboot etc. So when your instruction in previous post says use ADB and I purely don't know what it means.
I think if the option is there I'd like to ask if you could help with restoring it with Nabilab.
Thanks a million for your help!
T
Click to expand...
Click to collapse
Which version of Nabilab are you using? Is it the commandline version. Black window, where you have to use keyboard to make selections?
aicjofs said:
Which version of Nabilab are you using? Is it the commandline version. Black window, where you have to use keyboard to make selections?
Click to expand...
Click to collapse
Hi,
I'm using Nabilab ver 2 - black windows with keyboard made selections.
termostat1000 said:
Hi,
I'm using Nabilab ver 2 - black windows with keyboard made selections.
Click to expand...
Click to collapse
Find the Nabilab folder on your computer. Open the "recovery" folder. Then open the "stock" folder. Inside it there is recovery.img file. Rename it to recoverystock.img.
You downloaded the twrp-recovery-JBNV7AUS.zip from a few posts back. Extract the twrp-recovery.img file and put it in the stock folder. Now rename the twrp-recovery.img file to recovery.img.
Now boot the tablet to TWRP recovery(the one that isn't working) and run Nabilab. Select 4 Install recoveries. Then 4 instal stock recovery. Then reboot in to recovery and see if you have the 2.8.5 recovery
aicjofs said:
Find the Nabilab folder on your computer. Open the "recovery" folder. Then open the "stock" folder. Inside it there is recovery.img file. Rename it to recoverystock.img.
You downloaded the twrp-recovery-JBNV7AUS.zip from a few posts back. Extract the twrp-recovery.img file and put it in the stock folder. Now rename the twrp-recovery.img file to recovery.img.
Now boot the tablet to TWRP recovery(the one that isn't working) and run Nabilab. Select 4 Install recoveries. Then 4 instal stock recovery. Then reboot in to recovery and see if you have the 2.8.5 recovery
Click to expand...
Click to collapse
Great!
Your trick worked fine and now I can see TWRP 2.8.5.0 and I have problems with drivers - keeps failing to recognize the tablet.
I'll work on the driver issue or is there something I should know about it with TWRP 2.8.5.0 lodaed?
What is my next step from here as Android is still stuck on Nabi logo (no motion) and I'm afraid to do anything in case I create even bigger mess than I already have
I also noticed when I try to shut it down from inside TWRP it asks me a question if I want to root the tablet (Install super SU) - is it something I should do and at what stage?
Thanks!
T
termostat1000 said:
Great!
Your trick worked fine and now I can see TWRP 2.8.5.0 and I have problems with drivers - keeps failing to recognize the tablet.
I'll work on the driver issue or is there something I should know about it with TWRP 2.8.5.0 lodaed?
What is my next step from here as Android is still stuck on Nabi logo (no motion) and I'm afraid to do anything in case I create even bigger mess than I already have
I also noticed when I try to shut it down from inside TWRP it asks me a question if I want to root the tablet (Install super SU) - is it something I should do and at what stage?
Thanks!
T
Click to expand...
Click to collapse
If you can see the files again now with the correct TWRP. You can try to restore the 2.3.2 ROM again. Or maybe try the procedure from post #5 with the 2.2 ROM I linked to in post #7. You don't have to do the bootloader install anymore so skip that step. Installing root doesn't matter, you can choose to install or not.
aicjofs said:
If you can see the files again now with the correct TWRP. You can try to restore the 2.3.2 ROM again. Or maybe try the procedure from post #5 with the 2.2 ROM I linked to in post #7. You don't have to do the bootloader install anymore so skip that step. Installing root doesn't matter, you can choose to install or not.
Click to expand...
Click to collapse
You're a STAR!
All happy working as new with 232UK ROM and bootloader loaded with your instructions.
I'd never get this sorted without your specialized help.
If I only could I'd send you something just to say Thank You...
T - Happy Dad of Amelia
termostat1000 said:
You're a STAR!
All happy working as new with 232UK ROM and bootloader loaded with your instructions.
I'd never get this sorted without your specialized help.
If I only could I'd send you something just to say Thank You...
T - Happy Dad of Amelia
Click to expand...
Click to collapse
Your thanks is enough Glad we got it sorted and a happy kid!