Related
This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
I've searched this and other forums for solutions (.cab and regedits), but none of them worked for me.
I'm trying to get PC Anywhere 12.5 mobile to run on a custom ROM on my VZW HTC Touch Pro. It works perfectly on the stock ROM, the "pre-release" linked in the stock section, Scott's "6.5 beta" post -- but I can't get the darn thing to properly work on any of Scott's 6.1 custom ROMs. It will install w/o errors just fine on the latter, but as soon as I reboot and try to run the program I get the dreaded "application cannot be found or not signed with a trusted certificate error."
Any help would be greatly appreciated.
Landlocked
I have the same problem with HTC Touch HD...
I´m having the same problem. I try everything that you can think.
My phone is a HTC Touch HD.
The strange thing is that my wife has an Sansumg Omnia with windows mobile 6.1, and I install PCAnywhere and works fine.
If you find a solution, please tell to everybody, i will do the same.
Thank you.
I'm also having an issue with pcAnywhere on my HTC Touch Pro.
It installs fine. However, when I go to connect to a host it sits there with a warning "Warning: Reducing encryption level." -- and it hangs. On the Host I can see the phone trying to connect, but it never makes it. I've tried changing the encryption level to none, tried adding encryption, made sure the phone (remote) and host match.. and nothing. It'll never connect.
The same version of pcAnywhere mobile (3.0.0 Build 123) works fine on my HP iPAQ and HTC Apache without any issues. I've also tried a newer build (from the pcAnywhere 12.5 CD) and I've come away with the same results.
If anyone has any ideas....
Any updates?
Same problem on my htc touch pro
Beefheart36 said:
Same problem on my htc touch pro
Click to expand...
Click to collapse
That sucks, as this is one of the programs that I actually did use. Hopefully someone will figure it out. I'd be willing to donate some $ to the cause.
can you upload the cab so i can take a look at the files and see if i can find an issue...if you want pm me so you dont have to post in the open public...
Any news on these invalid cert. messages? I am having the same issue. Is there a way to turn off certificate on programs??? Wouldn't that be much simpler?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
I had the same problem. At least for me, the fix was to delete all the files that were MFC80xxx.dll. Then I could reinstall this.
I posted this fix a long time ago, but for anyone that may need it again, the way to get this program to work (at least for me):
After install - reboot the device.
Then, look for all the MFC80xxx.DLL files
Rename them to MFC80xxx.dll - it is important that these are all lowercase (the .dll extension).
It should work indefinitely after that fix.
For whatever reason, when pcAnywhere installs, after initial use or after reboot all the MFC80xxx.dll files have a capital .DLL extension. This will make it so that they cannot be read correctly for any application (including my backup applications). But changing it to smaller case .dll works. If you are concerned, reboot and check if it is still in lower case. It should be, but if not, just rename it again - it should stay for good.
Good luck for all that use this program.
hey guys,
for the fun i tried to run Eclair android on my niki, with in my mind it would not work.
well i did follow a tutorial which was meant for Kaiser/Vogue/Polaris.
then it just booted in Eclair, i made some pictures for you guys to take a look at.
Ill also make a vid, with booting in it, and some things to show.
enjoy!
sorry for my bad english, im from the netherlands
PICTURES
This are some pictures i made from Android Eclair on the HTC Touch-Dual *NIKI*
http://img175.imageshack.us/gal.php?g=img0741.jpg
VIDEO(S)
Here i will post all video's made by me, or people from xda-developers.
VID 1(made by me, do not mind my voice)
http://www.youtube.com/watch?v=z0u1ejw6AF8
DOWNLOADS
Here i will post all downloads you will need to run android eclair on your HTC Touch-Dual *NIKI*
SD-Card rips
Fast tutorial for installing SD-Card rips
1. Download the SD-Card rip package you want from this page.
2. Extract it to your desktop.
3. Now select all the folders, and right-click Copy.
4. Connect your HTC Touch-Dual *NIKI* to your computer.
5. Go to your explorer(right-click on start)
6. Go to your device, and select in there the SD-Card
7. Now copy all the just selected files to your SD-Card, this can take up to 20 minutes.
8. Now the copy process is finished, take your HTC Touch-Dual *NIKI* and go to the file explorer.
9. Go to your SD-Card, and run Haret.exe
10. Now just wait till android is started up.
SD-Card rip polymod 2.1 alpha 4(OLD)
This is a rip of my SD-Card, i do not know if it works on your HTC Touch-Duals *NIKIS*
But you can always try
http://www.mediafire.com/?gouyxj5igcy
SD-Card rip Android Eclair 2.1 Vogue(NEW)
This is a rip of my SD-Card, i do not know if it works on your HTC Touch-Duals*NIKIS*
http://www.mediafire.com/?mt1wblydryd
SD-Card rip Myn’s Warm Donut(NEWEST)
Here i will post the fastest android release that i found untill now.
This is a SD-Card rip which was installed on a HTC Kaiser, because the NIKI does not have as many keys as the Kaiser, i could not start the installation on my HTC Touch-Dual *NIKI*.
So there only will be a SD-Card rip untill now.
Here is the download link:
http://www.mediafire.com/?mmdihjjez1o
Android install folders
Fast tutorial for installing Install folders
1. Download the Install folder you want from this page.
2. Extract it to your desktop.
3. Now select all the folders, and right-click Copy.
4. Connect your HTC Touch-Dual *NIKI* to your computer.
5. Go to your explorer.(right-click on start)
6. Go to your device, and select in there the SD-Card.
7. Now copy all the just selected files to your SD-Card, this can take up to 20 minutes.
8. Now the copy process is finished, take your HTC Touch-Dual *NIKI* and go to the file explorer.
9. Go to your SD-Card, and run Haret.exe
10. Now you have to watch your screen very careful, when the text “Hold dpad center to launch installer” appears, press the middle button.
11. Now a install menu will come up, select the 1st option, Install system
12. Now there will pop-up a messenge “This will wipe your existing system!” just select YES, this will not remove your windows mobile installation, it should delete a previous android installation, which is not installed yet..
13. Now there will pop-up another messenger “Would you like to clear data too?(Suggested)” select YES again.
14. Now android will be installed on your SD-Card, when it is done, you will return to the install menu, now just select Quit and it will boot in android.
rip polymod 2.1 alpha 4 Install folder(OLD)
This is the Install folder of polymod 2.1 alpha 4.
This is the slowest android i runned untill now, i do not recommand it.
Download link:
http://www.mediafire.com/?zznwujznouz
Android Eclair 2.1 Vogue Install folder(NEW)
This is the installation folder.
Download link:
http://www.mediafire.com/?nxniyktlkuu
Myn’s Warm Donut Install folder(NEWEST)
Please take a look at the SD-Card rip.
Good news
I would to try it out. Can you upload your android package here?
yes, nike users can use the package for the vogue. the problem for me was that nike could not wake up after sleeping because we have different key mapping than vogue or kaiser. how is ur battery life?
im on school right now.
when im home, ill upload a complete rip of my SD card.
what i've done is the following:
i downloaded the pack for the HTC kaiser/vogue etc.
then i used the default.txt from a android made for the htc niki.
the only thing i changed in there was change "Zimage" to "Zimage-monsha"
then i could just install the andoid on my sd card and run it.
i don't know about the battery life yet, i didn't test it very well yet.
it's pretty laggy though so it will need some very good improvements.
Did your data work? I also got eclaire runniung on nike on ext2 partition using the methods from the vogue forums, but I noticed some issues:
- No data
- Slow
- I Tried to patch the new 3d driver stuff into the kernel. Afterwards i had accellerated graphics without textures (live wallpapers). But i have the same issue on some combinations of older builds, kernels and rootfs.
I also tried other builds from ext2 (all without rootfs, no working data on any of them , but it seems like the old versions with rootfs work better (-> data works)
i did not test it anymore.
i was at school.
rightnow im at home, so ill make a rip of my sd card, this is not formatted in ext2 or something.
i just deleted all the data on the sd card, and i just installed it.
it will take a while to upload, cause its pretty big.
right now im going to upload the .rar file.
it is 115 MB big, so make sure your sd-card is bigger than 512 MB
ritzky said:
yes, nike users can use the package for the vogue. the problem for me was that nike could not wake up after sleeping because we have different key mapping than vogue or kaiser. how is ur battery life?
Click to expand...
Click to collapse
i tryed with sleepmode on 0, and it just worken, also on 1 it just worked.
i do not know how to see if full sleep is working, but it could be also working on the HTC Touch-Dual *NIKI*
set pm.sleep_mode=4. Data don´t work. Data don´t work on Nike with more new Android OS like donuts(1.6) or eclair(2.1) only in olders like android 1.5. Nike handsets lacks of android developers. We have no luck like Polaris/Vogue/Kaiser/Diamond users
i know, but i edited the default.txt a lil, by changing the resolution, i had less lagg, but it does not show the whole screen :S
even when im using the resolution of the screen :X
if u set the sleepmode to 0, can u wake the device? i never been able to. could u post just your default.txt here? anyway, data is working for me.
Running
I tried this, i'ts running, here's my report:
1. I cannot make a call (incoming or outcome).
2. I cannot send the SMS
but the operators carries found..
ritzky said:
if u set the sleepmode to 0, can u wake the device? i never been able to. could u post just your default.txt here? anyway, data is working for me.
Click to expand...
Click to collapse
yes it awakes then.
and i did not test it with sim yet, the first thing i wanted to do is a good fast stable android build.
i found one, only one problem:
you cannot install it on your niki, i have to take the data.img and system.img from a HTC Kaiser(which uses my dad)
i already got a rip, right now im going to test if that works.
then i will delete all settings in there, and upload it here, one thing; it is REALLY fast!!
podelz said:
I tried this, i'ts running, here's my report:
1. I cannot make a call (incoming or outcome).
2. I cannot send the SMS
but the operators carries found..
Click to expand...
Click to collapse
I had the same problem first, then reboot the phone and it works great !
My only problem is the qwerty keyboard layout ... mine is azerty
great port thanks !
ok, thx man!
i'm in France right now, so i can't update my thread, when i'm back, i'll look for some newer versions and upload some other SD-Card rips, and Install folders
mrassol said:
I had the same problem first, then reboot the phone and it works great !
My only problem is the qwerty keyboard layout ... mine is azerty
great port thanks !
Click to expand...
Click to collapse
Hi there,
Tried it here in Germany. Boots fine, but no Data. Carrier shows up and after creating a new APN, The Modem APP shows active Connection, IP Address and so on. But for some Reason, there's no Flow of Data...
Any Ideas ?
Greetz lagloose
(BTW: Phone seems to work normal...)
lagloose said:
Hi there,
Tried it here in Germany. Boots fine, but no Data. Carrier shows up and after creating a new APN, The Modem APP shows active Connection, IP Address and so on. But for some Reason, there's no Flow of Data...
Any Ideas ?
Greetz lagloose
(BTW: Phone seems to work normal...)
Click to expand...
Click to collapse
Data don´t work on Nike with the more newest android builts. We lack developers
I noticed that data works on eclair and donut, but the connection drops after a (very) short time. Sometimes I was able to load one or two webpages after a fresh boot until the connection went down (20Key Nike, O2 Germany). I also got google sync once working for a few seconds (enough to fetch mail).
So it seems to be more a stability issue than a general lack of data connection.
Does anyone have developent experience with android? I am now compiling the eclair build with the latest libraries from the vogue andoid git tree, but if someone already knows were the data problem is or what it could be i could find a faster solution, any in the development would be great.
mblaster said:
I noticed that data works on eclair and donut, but the connection drops after a (very) short time. Sometimes I was able to load one or two webpages after a fresh boot until the connection went down (20Key Nike, O2 Germany). I also got google sync once working for a few seconds (enough to fetch mail).
So it seems to be more a stability issue than a general lack of data connection.
Click to expand...
Click to collapse
It´s true. It is like get freezed. If you go to modem and you want to disconnect it say disconnected but you can see still the icon and sometimes the up arrow. After this if you want to turn off the hanset you can´t and its needed a soft reset. So after get connect and with a luck to browse two webpages it get freezed
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.
HI everyone,
I bought a HTC HD2 some days ago, and there was win mobile 6.5 and android 2.2 installed. THere were many problem on the Android OS, it was very slow, the auto-rotate function didnt work, the "water scale" didnt also work correctly etc. Win Mobile seemed to work properly...
Today, I installed android 2.2 on my storage card and everything is working fine so far. Of course, WIN MOBILE is on my phones memory. Before installing it, the phone had problems with the flashlight (dual flash), simply, it did not work. Now, it is also not working, neither under WIN Mobile nor ANDROID.
How can I check that it is a hardware failure ? Or maybe its ROM or something ?
Thank you
Please, some idea ?
What level is the battery at? As I think thart below 20% the flash stops working.
What happens in WinMo when you run the camera and select flash always on and then take a picture?
THanx for the response, I really need some help.
Under WinMo occurs the same problem, the flash is not working even if I set it to AUTO/ON/OFF.
I also considered that the image quality after taking a picture and comparing it to my friends phone, is more bad than his one
PLEASE, someone help ?
Anyone has an idea ?
vedolino said:
Anyone has an idea ?
Click to expand...
Click to collapse
Hi There
I'm not aware of any "diagnostics" modes to test hardware on the device but the first thing I would do from within Winmo is install a Torch App and try and use the torch, if the Torch app initialises the flash on the back of the phone then you know it's a OS fault whereas, if it doesn't you know it's a hardware fault with the flash module itself on the phone
Here's a link to TorchButton
http://forum.xda-developers.com/showthread.php?t=581382
Let us know how you get on
Thank You very much for the reply.
But I act as a noob.
I copied the whole unrar-ed folder to my SD and to phone, in both ways, when I try to start any of those files it says:
There is no application associated with ... Run the application first, then open this file from within the application.
How to run the application ?
Can someone just download the TORCH and explain to me how to install it
Would be very very thankful.
Can someone just explain me how to install or whatever the torch on my HD2 WIN Mobile 6.5.
THanx
anyone ?
thx
Do not unpack (unzip, unRAR) the file. Just copy it to your phone (or SD card). Use the phone's file explorer and find the file. click on it, and it will install.
.cab files are cabinet files, they pack other files inside them, just like zip files - but they are used in both Windows (the computer o/s) and the WinMo o/s as a unpack and install file (obviously the file should only be run in the desired o/s).
Thank You fred_up,
I barely did it, but the flash is still now working.
I hope its only the flex cable which is not too expensive, about 10 USD !?