How-TO Root the
HTC Slide
HTC Aria + See this Link > http://forum.xda-developers.com/showthread.php?t=708233
&
Nexus One
Works With ALL 2.1 HTC PHONE"S with 2e Recovery!
Must be able to See the Device From the ADB in recovery for it to work!
See this Thread if you Have a New Slide or Updated the OTA to version 1.35.531.1
http://forum.xda-developers.com/showthread.php?t=754669
If at anytime You have Trouble or Can't get my Method to work, Please see wesgarner's [Root] SimpleRoot v1.3 (Linux/Windows)
Link > http://forum.xda-developers.com/showthread.php?t=713347
Just use my Update.zip if you just want root only
Download This Package > Root.zip
*EDITED* 6/29/2010 Update Now Contains Su & Superuser.apk. Permission Fixed on SU / Sh as well
-Contains Dusty51 script for Partitioning the a2sd & Swap
-fstab install so swap will work
-Default partition table's are:
-Linux Swap @ 32mb
-ext2 a2sd partition @ 512mb
-Fat32 Partition is based on the size after the 2 above
How-to Use:
Once You load the Recovery via update.zip, Unplug & Plug the USB to make sure the Device is Seen..
- Open Command Prompt from Computer
- Adb shell
- sdparted
- Next Follow the Command, y = Y to confirm..
Note: Backup your SDCARD first, only thing should be on it is the update.zip then Follow the above to Format for a2sd support!
Click to expand...
Click to collapse
Stratis1978 said:
I've got root now and just wanted to repeat what made the difference for me (also posted pages back):
when you're ready to run recovery in the bootloader be sure to unplug the USB from your phone until 'HBOOT' not 'HBOOT USB PLUG' displays.
So basically you unplug the phone until 'HBOOT' appears, have 'RECOVERY' highlighted, and plug the phone in a moment before you select 'RECOVERY'.
The moment I did that I had 'recovery' displaying in my loop.
Continue with the directions...
Click to expand...
Click to collapse
How-TO Root the Slide
First!! - Go to Settings > Application > Development and turn on USB Debugging. This should save you headaches.
NOW… Power Off the Slide
Step 0.
Un-zip the Package you Downloaded
Step 1.
Place the Contents of "update.zip" & "ota.zip" & "loop" into your Android SDK Tools folder.
Step 2.
Open Command Prompt or Terminal and CD to the SDK/Tools Directory.
Step 3.
Power on the Slide into the bootloader by Holding Down ( Volume Down + Power Button )
Step 4.
Now run your loop file from the prompt (either type "loop" in windows or "./loop.sh" in a *nix like) ( ./ Is used For OSX )
Step 5.
Once your loop is running in your prompt, select Recovery from the bootloader menu.
Step 6.
When recovery loads, you should Have an Offline Device. You can use ctrl+c to stop your script & see.
If this doesn't happen, Power Off and try again..
Step 7.
Un-plug your USB cable from the back of your phone & Plug it back in for it to Detect ADB Correctly!!! This is an important step. At this point you can adb devices to see if you can see your device and that it is in recovery mode.
Step 8.
Hit Volume Up + Power button to Bring up the Selectable Menu
Select Update.zip from the menu. (This will fail, but we already know that! Select it anyway).
Step 9.
adb push ota.zip /sdcard/update.zip (*OSX users add a ./ in front of all terminal commands please.)
Step 11.
This is Very important!! Have this Command ready in your prompt before applying update.zip again!!
This is the Command, We do not Push this Yet adb push update.zip /sdcard
Click to expand...
Click to collapse
step 12.
Hit run update.zip, as soon as you see a Little Bar appear under the text, push Enter to execute the command in your prompt (adb push update.zip /sdcard )
Step 13.
In successful, you should see Clockwork Recovery & you Now have Su & Superuser.apk Installed! You can Now Reboot Your Phone into the OS to verify.
If unsuccessful, repeat steps 11 & 12.
Congrats.
Next Guide For Flashing the ENG-BUILD with Test-key Recovery http://forum.xda-developers.com/showthread.php?t=703076
Updating the Radio Once Everything Is Done http://forum.xda-developers.com/showthread.php?t=705064
Special Thanks to:
Paul O'Brien: > http://android.modaco.com/forum.html
Koushik K. Dutta: His ClockWorkMod Recovery can Be found here > http://www.clockworkmod.com/
&
http://unrevoked.com/ OTA Spoofing Method
&
ChiefzReloaded for Huge amount of Suggestion & Brain Storming.
GREAT JOB!
Thank you sir, for your diligence, and hard work! Let's get to work boys!!!
Tips: May want to be a little more clear on "SDK Directory". Some may think that you "must" have this directory, but all that is important to know is that you know the directory where the contents were placed... If that IS the case, then I'd mention that...
Also, might be important to mention the phone should already be plugged in, and should have prerequisite of ADB working...
Thaaaaaaank you! got some fun stuff to do right after work now
Re: How-TO * Root The Slide * *6/15/2010*
Thanks guys. You've made a lot of people happy.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Having trouble at step 5. ADB works when the phone is powered on. However, when in Recovery, adb devices list is blank.
Other problems: is Step 8 really a step? It says to select Update.zip... is this just anecdotal, as in "Now we will select an update.zip"...?
And how are you "selecting" things in Recovery? My recovery simply has the phone with a triangle...
What is ADB i come from rooting g1 and i dont remember or know what it is i rooted my g1 when it first came out and every since then all i had to do is name file update then push. could u be alittle more clear for a retard like me I dont want to miss my phone up when i just got it today, I really want to get rid of some of the bloatware on it tho
richierich118 said:
What is ADB i come from rooting g1 and i dont remember or know what it is i rooted my g1 when it first came out and every since then all i had to do is name file update then push. could u be alittle more clear for a retard like me I dont want to miss my phone up when i just got it today, I really want to get rid of some of the bloatware on it tho
Click to expand...
Click to collapse
ADB is part of the Android SDK, you'll need to download it and extract it to your PC before you can use it.
http://developer.android.com/sdk/index.html
My problem may be that I'm using a Mac, but I cannot get my Terminal to recognize the "loop" command. I've tried many things and it won't work properly just keeps giving me errors. I'm gonna keep trying though.
android007 said:
My problem may be that I'm using a Mac, but I cannot get my Terminal to recognize the "loop" command. I've tried many things and it won't work properly just keeps giving me errors. I'm gonna keep trying though.
Click to expand...
Click to collapse
Loop is just a batch file (.bat). I don't know about Macs using batch files. All it's doing is looping the "adb devices" command to see if it detects the device.
fermunky said:
Having trouble at step 5. ADB works when the phone is powered on. However, when in Recovery, adb devices list is blank.
Other problems: is Step 8 really a step? It says to select Update.zip... is this just anecdotal, as in "Now we will select an update.zip"...?
And how are you "selecting" things in Recovery? My recovery simply has the phone with a triangle...
Click to expand...
Click to collapse
You have to Repeat then... It Don't always work everytime!! That's why I said Repeat.. You have to Power Off, run loop & if you see now Devices then you have to Repeat again!!
You Must boot into bootloader First!! Run Loop, Then to Recovery!
my computer doesn't find the device in recovery mode. Any advice on getting around this? adb works when phone is on.
eugene373 said:
You have to Repeat then... It Don't always work everytime!! That's why I said Repeat.. You have to Power Off, run loop & if you see now Devices then you have to Repeat again!!
Click to expand...
Click to collapse
Wow, cant believe I missed that order. May need to update the how to though... it says to run loop, then go to bootloader, then to recovery. You need to add a step after getting into bootloader of "Wait for device to be listed, then goto recovery"... or similar.
My error when trying to invoke the loop file:
: command not founde 1: :TOP
sdk/tools/loop: line 2: adb: command not found
sdk/tools/loop: line 3: GOTO: command not found
Click to expand...
Click to collapse
Sweeeet! Awesome job guys.
On Mac replace the loop.bat with loop.sh and change the contents of the file to the following:
#!/bin/bash
while [ 1 ]
do
adb devices
done
On the command line, run "chmod 755 loop.sh" to give it execute permission. To run the file type "./loop.sh"
Are there any roms for it yet?
android007 said:
My error when trying to invoke the loop file:
Click to expand...
Click to collapse
You have not added the tools directory to your PATH system variable. Explained on the SDK page. Also, you don't need to be in the /tools folder, just go to the folder you extracted the files to.
Eugene, I noticed while the loop was running, I chose recovery, and on one instance, I saw an offline device, but then subsequent loop commands, it stopped listing them. Also, it is still not clear what to do on Step 8. Most of us only see an image in recovery, no menus.
With no menus, anyone know how to reboot the phone in recovery other than removing the battery?
marvinp said:
On Mac replace the loop.bat with loop.sh and change the contents of the file to the following:
#!/bin/bash
while [ 1 ]
do
adb devices
done
On the command line, run "chmod 755 loop.sh" to give it execute permission. To run the file type "./loop.sh"
Click to expand...
Click to collapse
you think you can do quick little rewrite of the tutorial for us mac users
Related
HOW-TO Root the Slide
(MAC OSX FLAVORED) KAPOWWW!!!!
&
Android SDK on Mac
STEP 1.
Download Android SDK from here.
STEP 2.
Unzip it. Place the folder it creates in your Documents folder and rename it AndroidSDK or SDK. (Something Easy)
SUCCESS!!! Android SDK Installed… //WTF!!??!!
STEP 3.
Download This Package > Slide Root.zip
Place the Contents of "Slide Root.zip" into your Android SDK Tools folder.
(These five files need to be placed DIRECTLY into the AndroidSDK/tools/ folder)
STEP 4.
RENAME Loop.bat to Loop.sh, then right click, open with TEXTEDIT.
Delete it’s contents and replace it with
#!/bin/bash
while [ 1 ]
do
adb devices
done
Save and Close the File.
STEP 5.
On your Slide, GO TO Settings > Application > Development and turn on USB Debugging.
This should save you headaches.
NOW… Power Off the Slide
STEP 6.
OPEN Terminal
(APPLE + SPACE and type Terminal, press enter.)
Now, CD to the SDK/Tools Directory.
It should be where we left it.
/Users/YOURUSERNAME/Documents/AndroidSDK/tools/
Terminal SHOULD open with it already in your USERNAME
Type cd Documents/AndroidSDK/tools/
STEP 7.
Power On the Slide into the Bootloader by Holding Down ( Volume Down + Power Button )
STEP 8.
NOW run your loop file (the one we made earlier)
The Terminal should be all queued up to the Tools folder.
Type in ./loop.sh
(The Terminal should be blowing up with List of Devices Attached over and over)
STEP 9.
Once your loop is running, select Recovery from the bootloader menu.
(Volume UP & DOWN to change selection and POWER to Select)
STEP 10.
When recovery loads, you should Have an Offline Device.
The Slide’s screen will have a picture of a Phone and RED triangle around a !
(Don’t freak out, this is a good thing.)
Hit Ctrl + C to stop your script & see.
If this doesn't happen, Power Off and try again from STEP 7.
STEP 11.
Un-plug your USB cable from your Slide & Plug it back in for it to Detect ADB Correctly!!!
IMPORTANTE!!!
At this point you can adb devices to see if it detects your device and that it is in recovery mode.
Type into Terminal ./adb devices
If it says recovery you are golden and move onto STEP 12 to kick the habit.
If not, rinse and repeat from STEP 7.
STEP 12.
Select Update.zip from the menu. (This will fail, but we already know that! Select it anyway).
STEP 13.
Type into Terminal
./adb push ota.zip /sdcard/update.zip
STEP 14.
Type into Terminal
./adb push slideroot.zip /sdcard
STEP 15.
MUY IMPORTANTE!!!
Have this Command ready in your Terminal before applying update.zip again!!
./adb push update.zip /sdcard
STEP 16.
On your Slide, Hit run update.zip
As soon as you see A Little Bar appear behind the text
Push ENTER to execute the Terminal command
(./adb push update.zip /sdcard )
STEP 17.
If successful, you should see Clockwork Recovery.
If unsuccessful, repeat steps 13-16.
STEP 18.
In Clockworkmod Recovery,
Go to the Partitions menu and Mount System
(It should be at the top and the only one not mounted.)
STEP 19.
Go one level back & select install any zip from sdcard.
Select slideroot.zip & apply update from zip
(This will finish the Root process).
STEP 20.
Reboot your phone & wait for it to load completely.
To confirm that your slide is connected as a device use the command ./adb devices
If this works, you will see it as a device. Your prompt will say something like:
$ ./adb devices
List of devices attached
HT05YUP12710 device
STEP 21.
./adb install Superuser.apk
(If it says it cannot locate directories, make sure you can find your device
using ./adb devices… If things still don't work, my best advice is to start over)
STEP 22.
After Superuser is installed try to use adb to shell to your device.
Type in Terminal
./adb shell
you will get a $
Then type su
On the Slide, Superuser should pop-up asking if you give permission, do so.
In Terminal, your $ should turn into a #. If so, you have root. WOOT!!!
Original SHOUT OUTS!!!
Special Thanks to:
Paul O'Brien:
Koushik K. Dutta:
&
The Guys using the Incredible OTA Spoofing Method
&
ChiefzReloaded for Huge amount of Suggestion & Brain Storming.
But most of all, you should thank eugene373 for rooting the slide and not sleeping for two days.
His original post is here.
sk8rbebop said:
STEP 14.
Type into Terminal
./adb push slideroot.zip
Click to expand...
Click to collapse
should it not be:
./adb push slideroot.zip /sdcard
Also...
sk8rbebop said:
STEP 15.
VERY IMPORTANTE!!!
Click to expand...
Click to collapse
Should be:
MUY IMPORTANTE!!!
I don't understand the need for a separate post when the only difference between osx and windows is that osx uses a shell script and windows a batch file and osx is discussed in the post about rooting.
nerdcorerising said:
I don't understand the need for a separate post when the only difference between osx and windows is that osx uses a shell script and windows a batch file and osx is discussed in the post about rooting.
Click to expand...
Click to collapse
Five different people asked for it so they got it.
Thanks!
Thanks a bunch for the tutorial! We really do appreciate it. I just had a couple questions about 2 of the steps.
STEP 6.
OPEN Terminal
(APPLE + SPACE and type Terminal, press enter.)
Now, CD to the SDK/Tools Directory.
It should be where we left it.
/Users/YOURUSERNAME/Documents/AndroidSDK/tools/
Terminal SHOULD open with it already in your USERNAME
Type cd Documents/AndroidSDK/tools/
I got lost where it says "Now, CD to the SDK/Tools Directory." I do not really know what the CD means and what I should be typing into Terminal?
Also should my phone already be plugged in to my Mac?
Please let me know and thanks!
Thanks a bunch for this tutorial. I am about to try to ROOT, it should go over smoothly. Now from the ROOT what else have you guys been doing to you're Slide? I know Cyanogen has not said much, that is who I used for my myTouch 3G and my G1.
Click to expand...
Click to collapse
I flashed the Eng Build, then SlideMEROOT2 and then the new radio (you need this). Just follow the how-to's already posted, but remember to type ./ before the commands in Terminal.
Ex. ./adb devices Instead of adb devices.
There were a couple people who were trying to keep their original stock rom, but slidemeroot2 is basically the original rom. Plus, someone posted the original stock backup, so flash away.
-------------------------------------
Sent via the XDA Tapatalk App
this is wrong
#!/bin/bash
while [ 1 ]
do
adb devices
done
it should be
#!/bin/bash
while [ 1 ]
do
./adb devices
done
shadowleo85 said:
this is wrong
#!/bin/bash
while [ 1 ]
do
adb devices
done
it should be
#!/bin/bash
while [ 1 ]
do
./adb devices
done
Click to expand...
Click to collapse
It's no more "wrong" than your code...
The first assumes that you've configured your shell to link the "adb" command to the adb "app" in the sdk/tools directory. Your code assumes that you will be activating the script while "within" that very directory.
The code, IMHO, should read:
Code:
...
[PATH TO SDK/TOOLS/]adb devices
...
And the OS X user should be instructed to insert their own path.
HebrewToYou said:
It's no more "wrong" than your code...
The first assumes that you've configured your shell to link the "adb" command to the adb "app" in the sdk/tools directory. Your code assumes that you will be activating the script while "within" that very directory.
The code, IMHO, should read:
Code:
...
[PATH TO SDK/TOOLS/]adb devices
...
And the OS X user should be instructed to insert their own path.
Click to expand...
Click to collapse
WRONG the code running in the shell is to continuously run adb devices... which to do so correctly would have to be implemented with ./ in front to run correctly on a mac... dont try to correct what is right i will school u
and seeing as he clearly instructs u to place those apps within the tools folder and "cd" to it... means that the user should have those commands ready at hand which is included in the folder...
shadowleo85 said:
this is wrong
#!/bin/bash
while [ 1 ]
do
adb devices
done
it should be
#!/bin/bash
while [ 1 ]
do
./adb devices
done
Click to expand...
Click to collapse
Ur right.. that is the right way..
also for those of u having problems with the loop step where it never sticks... try a different memory card... i was having problems with the stock card... so i tried a different card and it worked perfectly... with no problems
shadowleo85 said:
and seeing as he clearly instructs u to place those apps within the tools folder and "cd" to it... means that the user should have those commands ready at hand which is included in the folder...
Click to expand...
Click to collapse
LOL. Okay, tough guy.
The fact is that the active directory in your terminal is irrelevant to the actual rooting process. If you want to argue about it, have at it. I really don't care.
Yes, in terminal you must type ./adb devices, but within the .sh you can just issue adb devices and it works just fine. It is because you are issuing a command from within a script and OS X understands you better when you use them.
As for the memory card trick everyone is perpetuating, tis but a superstition and whatever floats your boat, while you attempt to get adb to stick. When I rooted mine, it took five to ten tries. Rooting my girlfriend's, on the other hand, took nearly 15-20 min for it to catch.
sk8rbebop said:
Yes, in terminal you must type ./adb devices, but within the .sh you can just issue adb devices and it works just fine. It is because you are issuing a command from within a script and OS X understands you better when you use them.
As for the memory card trick everyone is perpetuating, tis but a superstition and whatever floats your boat, while you attempt to get adb to stick. When I rooted mine, it took five to ten tries. Rooting my girlfriend's, on the other hand, took nearly 15-20 min for it to catch.
Click to expand...
Click to collapse
within the shell command command it has to be ./adb devices or it fails at command line 4 which is the problem i was having until i changed it in the shell and it worked... along with a few others...
and as far as the memory card thats the issue... i tried 5 different memory cards one always worked the others never stuck... it may have something to do with the way the memory card is coded... my 16gb mem card out my hd2 is the only one that worked... not really a superstition
shadowleo85 said:
within the shell command command it has to be ./adb devices or it fails at command line 4 which is the problem i was having until i changed it in the shell and it worked... along with a few others...
and as far as the memory card thats the issue... i tried 5 different memory cards one always worked the others never stuck... it may have something to do with the way the memory card is coded... my 16gb mem card out my hd2 is the only one that worked... not really a superstition
Click to expand...
Click to collapse
The memory card has nothing to do with the rooting process whatsoever. With that said, a lot of the memory cards shipping with the slides are misformated. The first thing I did was backup my card, swap it out with a class 10 16 GB card and set up a 1GB ext4 partition. Then I copied the files back to the FAT partition and all was well.
HebrewToYou said:
The memory card has nothing to do with the rooting process whatsoever. With that said, a lot of the memory cards shipping with the slides are misformated. The first thing I did was backup my card, swap it out with a class 10 16 GB card and set up a 1GB ext4 partition. Then I copied the files back to the FAT partition and all was well.
Click to expand...
Click to collapse
yet with all the cards i tested which are formatted correctly and running perfectly on all my devices... and even tried useing my class 6 8gig with is partitioned for my og mytouch didnt work... dude stop trying to correct me i got this... worry bout ya own lil world
shadowleo85 said:
yet with all the cards i tested which are formatted correctly and running perfectly on all my devices... and even tried useing my class 6 8gig with is partitioned for my og mytouch didnt work... dude stop trying to correct me i got this... worry bout ya own lil world
Click to expand...
Click to collapse
Oy vey. Seriously? The rooting process is a hit or miss operation. Your sdcard doesn't even come into play for a second. You could probably remove the darn thing and be successful.
Please, for heaven's sake, just listen to sk8rbebop, myself or any of the numerous other people saying in no uncertain terms that the sdcard issue is a myth. Don't perpetuate something that is entirely unrooted in reality.
Sheesh...
HebrewToYou said:
Oy vey. Seriously? The rooting process is a hit or miss operation. Your sdcard doesn't even come into play for a second. You could probably remove the darn thing and be successful.
Please, for heaven's sake, just listen to sk8rbebop, myself or any of the numerous other people saying in no uncertain terms that the sdcard issue is a myth. Don't perpetuate something that is entirely unrooted in reality.
Sheesh...
Click to expand...
Click to collapse
how can it be unrooted in reality when in reality it works and im proving that... its mighty funny that it doesnt stick unless this specific memory card is in my device... and u stating that it doesnt come into play is wrong... when u load ur phone into bootloader it does check ur "memory card" for an nbh image which is where i believe the problem lies... it accesses ur memory card just like the og mytouch did to locate a gold card... dont argue with me when it is just another work around that just may work seeing as IM PROVING THAT IT DOES INDEED WORK
shadowleo85 said:
how can it be unrooted in reality when in reality it works and im proving that... its mighty funny that it doesnt stick unless this specific memory card is in my device... and u stating that it doesnt come into play is wrong... when u load ur phone into bootloader it does check ur "memory card" for an nbh image which is where i believe the problem lies... it accesses ur memory card just like the og mytouch did to locate a gold card... dont argue with me when it is just another work around that just may work seeing as IM PROVING THAT IT DOES INDEED WORK
Click to expand...
Click to collapse
Oy vey. Fine, believe what you want. What's *actually* helping you root the device is sticking gum on your nose, turning your baseball cap backwards, rubbing your lucky rabbit foot and reciting the pledge of allegiance. You just haven't realized it yet.
Stay crunchy.
HebrewToYou said:
Oy vey. Fine, believe what you want. What's *actually* helping you root the device is sticking gum on your nose, turning your baseball cap backwards, rubbing your lucky rabbit foot and reciting the pledge of allegiance. You just haven't realized it yet.
Stay crunchy.
Click to expand...
Click to collapse
dude wtf is ur problem... if it can possibly help someone whose having the issue y r u having such an issue with it
I followed all of the instructions on this post:
forum.xda-developers.com/showthread.php?t=442480
No problems at all doing any of it.... BUT I have a G1 that had 1.6. Now it's 1.0. Everything seemed to work fine, but when I try to update with any ROM it does not seem to work... still 1.0.
When I restart it by holding the power and the home button I do not get the menu screen that all tutorials seem to have, I still get the Exclamation mark and have to hit Alt S.
Any suggestions? I have tried loading Cyanogen and 2 different JesusFreak versions. But no changes. ???
EDIT: Ok I just found this ...
to see is you are "rooted" download or use terminal app
At the $ prompt type su <enter>
should return a prompt now of
#
I downloaded the terminal app and it says permission denied when I type in su.
SO I guess it's not rooted...BUT everything I did with the instructions went off without a hitch. Did the telnet instructions with no problems....??? AHHHH!
NEW EDIT! OK I found this video "Rooting the G1 to Amon RA's Recovery " on you tube. Followed the simple instructions, everything worked great. So now I have 1.5.2, booted pressing home and power and got the menu screen for the first time ever. Tried to run an update and that menu screen is gone, I'm back to the exclamation point. And still su does not work in the terminal. And telnet only gives me a connection error now. PLEASE HELP!!!!
Ok I started over did ALL OF THIS:
If you have US-RC30/UK-RC8 or higher, you will first need to downgrade your phone to a previous version. (Skip these steps otherwise)
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry boot loader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
Rooting your RC29 or lower phone:
On RC29 phones and lower, anything you type into your keyboard is also being run in a hidden console with root permissions. More information regarding that at the bottom of this post. But, to get root access, do the following:
Instructions:
1. Download recovery.img or the new version by Amon recovery-RA-dream-v1.5.2.img and copy it to your SD card (see the previous instructions on how to copy from your computer to your Phone's SD card).
2. Download the Hard SPL and copy the zip file to the SD card.
3. All files must be on the root of your SD card.
4. Restart your phone. Wait for your phone to start up fully and show the home screen.
5. After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)
6. Download an Android "Telnet" application from the Market and connect to localhost.
7. If you connect successfully, you will have a root prompt "#".
8. Type the following into Telnet (these commands will give you root access easier in the future):
* mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
* cd sdcard
* flash_image recovery recovery.img
* cat recovery.img > /system/recovery.img
Now you have root!
SO, it says I should have root now. I downloaded the terminal, typed in su and it says access denied. ???
Wow. I cant believe that not as single person is willing to help me on a forum about this subject.
So I started over for the 4th time. Again did everything, it all goes smoothly. But still do not have permission when I type in su to a terminal.
I loaded Amon Ra Recovery, then loaded signed killa 1.5.
It worked, I see 1.5, but when I reboot I do not get the menu, I still get the exclamation point..... I only get the menu on the first reboot after loading the Amon Ra Recovery.
PLEASE ANY HELP I'M DYING OVER HERE!!!
fellow g1 er
Theunlocker ddoott coom
For g1 Has two part video about going bqack to early version and then flashing foward to get root
It worked for me.
However you should be aware that their procedure uses something other than dangerecovery which cyanogemod requires. To use froyo 2.2 android.
I found this out AFTERFLASHING FROYO so now oi have to backtrack.
Thunlocker also links to a g1 android version with root whiicch what you flash last from the sd
card using amonra recovery.
I do however haave root. And the unlocker basic root rom worked well until I flash cyanogen mod rc3
But rc3 does still have root on my phone. It just doesn't run well because only danger recovery can partition the nand chip properly apparently and I haven't done that yet.
Furthermore be aware if you install gapps that there are two versions mdpi and hdpi and no one tells you but I think only mdpi works on g1 .
I found out after flashing hdpi myself.
Wish others would help.
We are the blind leading the blind.....
If you find something that gets you cyanogenmod worling with google apps market then please tell me how.
At least if you follow the unlocker videos you will have root.
Get it from their webpwage not you tube because the webpage has the steps written out as well.
like this!
i thought a purely ubuntu method would be helpful for those just starting out [like me] and the linux methods haven't been updated [to my knowledge].
1. charge your phone to at least 50%.
2. get adb.
BEARTARD said:
Install adb. Download it here: developer.android.com/sdk/index.html . adb is a little program distributed as part of the Android software development kit (SDK). Its job is to communicate with the phone from a shell (terminal). To install adb, I strongly suggest you copy the adb file from the tools directory into your system's /usr/local/bin directory. This way, it will always be in your path. If you don't intend to do development work on Android applications, feel free to delete the rest of the SDK after installing adb.
Click to expand...
Click to collapse
so, download that ^ . open it up and extract the adb file from the tools folder onto the desktop. now open up the terminal and type in:
gksu nautilus /usr/local/bin
drag the adb file in there and close nautilus.
3. pick a rom from the rom bible: forum.xda-developers.com/showthread.php?t=704567
i like the ota updated one from CR, the froyo ones were "too lacking" for me. although still awesome*
place the rom on your phone's sd card. don't unzip it. and remember where you put it.
4. download this 4shared.com/file/J6i52nwy/slideroot.html
make a folder somewhere [i use the desktop] and name it something, like "root". extract the downloaded files into that folder.
5. set the phone up to be rooted:
-unplug it from the computer if it is plugged in
-again, make sure it is charged to at least 50%
-settings > applications > development > USB debugging (check mark here)
-settings > connect to pc > charge only
-settings > wireless & networks > wifi unchecked (important)
-settings > sound & display > screen timeout > never
-now plug it back in
6. minimize all other windows.
open up a terminal and type:
cd
now drag the folder you extracted all the stuff from step 4 into the terminal window [faster than typing it all out ]. click the title bar of the terminal. press enter. don't close this terminal. we should now be inside the folder.
7. copy and paste these commands in order.
they make some time to complete, so be patient or risk KILLING YOUR PHONE TO DEATH. [also, i'm not sure which commands actually require sudo to run so i just included it in all of the commands, forgive my noobishness].
commands:
sudo adb devices
-to start it up and make sure your phone is recognized the first time, if not, try again:
sudo adb devices
sudo adb push exploid /sqlite_stmt_journals
sudo adb push flash_image /data/local
sudo adb push mtd0.img /data/local
sudo adb push update.zip /sdcard
sudo adb push esprimg.zip /sdcard/ESPRIMG.zip
-you might want to get a drink or say hi to some friends at this point; takes a while. just wait until it says it's done like the rest.
adb shell
cd /sqlite_stmt_journals
chmod 0755 exploid
./exploid
-at this time go to settings and turn wifi on and then back off before continuing
./exploid
-the password is : secretlol
you should now have a # instead of a $
cd /data/local
chmod 04755 *
/data/local/flash_image misc /data/local/mtd0.img
8. turn off the phone.
9. press and hold volume down and then power up; hold both buttons.
let go when see the 3 skateboarding androids.
10. wait until the bar on the side of the screen loads.
if you don't see the bar wait about 4 minutes and something should happen.
11. when it is finished, press volume up, when prompted, to apply the update.
wait some more!~
DON'T REBOOT when it is done.
12. DON'T REBOOT!
13. press volume down.
press volume down once to highlight recovery and select with the power/lock button to boot recovery.
on the recovery screen you will see a device with a red warning triangle.
hold volume up and power together for a second or so.
14. ignore the warning at the bottom.
press volume down and then power to select apply update.zip.
you will now be loaded into the clockwork recovery and will be able to flash the rom of your choosing from your sd card.
you can use your touchpad at the bottom now and select with it.
otherwise: volume butttons=navigation power/lock=select
15. do a backup of your phone with nandroid.
-pretty self explanatory > press backup >wait >??? >profit!
16. wipe the device.
this won't wipe your sd card though, so don't worry.
17.install a custom rom
scroll down and select "install zip from sd"
select choose "zip from sdcard"
find your rom and apply!!!
wait!!!!!!.....
reboot!
18. complain on the dev forums about how bad the roms are, how dead the phone is, and speculate about newer phones. also, make sure to start your own thread even if it is a question, general banter, or to post pictures .
/sarcasm
19. seriously don't do step 18.
>_O
20. update the radio if it is not the newest one.
forum.xda-developers.com/showthread.php?t=705064
sources/more info:
exploid method:
forum.xda-developers.com/showthread.php?t=754669
ubuntu set up:
forum.xda-developers.com/showthread.php?t=710056
rom bible:
forum.xda-developers.com/showthread.php?t=704567
go donate money to the active devs now.
Oh crap. I got quoted. Good job, man!
thanks! i didn't know how else to so eloquently explain adb, so i just quoted you. hopefully this will be of help to all three of those linux users out there on this forum!
It's kind of funny, I came on here to write a thread like this one. I noticed that there wasn't a single thread that combined the new root method with flashing the ENG build into one. You saved me some time.
I noticed that you don't have the part about updating to the newest Radio after the ENG build. Do the newer ROMs come with a Radio update in them?
@slughappy1: i reccomended updating to CR's OTA rom since going from stock to updated stock with root is the most logical step. therefore, a radio updatre is included.
to my knowledge, the nicer devs include the newer radio, other wise they make a mention of updating it. anyways, i'll include it in my tutorial for completeness sake. now if only i could figure out how to take non-blurry distance pictures with my slide >_>. sadly, i'll probably sell this off for a g2 =\.
Why sudo? I don't think adb need super user permission. Is it needed because you put it in /usr/local?
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
arifwn said:
Why sudo? I don't think adb need super user permission. Is it needed because you put it in /usr/local?
Click to expand...
Click to collapse
Some systems are setup incorrectly to handle giving users permission to write to the ADB device file when the phone is plugged in. The correct process is to fix the permissions on the dev file that udev creates. Here's a link to do that: http://forum.xda-developers.com/showpost.php?p=5300224&postcount=6.
Please ALWAYS refrain from using 'sudo' or 'su' unless you're ABSOLUTELY sure that it needs root and there's no (more) proper way to do it.
(On a side note, I'm always available to answer any simple or complicated Linux questions anyone may have. You can PM me to get my attention or GTalk: nbetcher at gmail dot com.)
Thanks for the post about not using sudo. It was a quick way to make sure users on various linux distros can get it to work without a whole bunch of rigmarole.
On another note about the udev rules mentioned, the "SYSFS{}" call is being deprecated and a revision will be needed soon.
So i tried to follow the intstruction but once i booted in recovery mode nothing happend
10. wait until the bar on the side of the screen loads.
if you don't see the bar wait about 4 minutes and something should happen.
this is the step where nothing i happening on my phone
huh!! no one cares to help me
You didn't give much information to learn where the problem might be. If you didn't get the loading bar on the side of the screen, your recovery didn't see the ESPRIMG.zip file in the root directory of your sd card. Mount it on the computer and see if it's there.
beartard said:
You didn't give much information to learn where the problem might be. If you didn't get the loading bar on the side of the screen, your recovery didn't see the ESPRIMG.zip file in the root directory of your sd card. Mount it on the computer and see if it's there.
Click to expand...
Click to collapse
Alright let me check if the sd card has ESPRIMG.zip. but i have a question no where in the instruction it says if i need to transfer the zip file to the sd card ?
Step number seven is one of the most important ones. Check those commands you pasted. Most of them copy files to various places on your phone.
Hi to All,
Well I got an ASUS TF201 March 2012 and I never messed with it much, just net surfing and watching movies and listening to music....
I wanted to get rid of some apps that I dont use at all e.g Amazon Kindle but found out with research that I can do that. Also tried to use apps like Titanium Backup again I couldnt. I am new to the Tablet world this is my first. So I did some research and terms of root, unlock etc came up. So I know the difference between them. In order not to lose my warranty and since I just want to be able to delete certain unwanted apps and add other apps, I just want to for now root my TF201.
Did more research but I still cant get an answer or get some of the methods to work for me.
Below is the specs for my Asus TF201
1. So I have JB (Android Version 4.1.1), dont know if it came with it or got updated like I said I didnt mess with the tablet alot
2. Build #: JRO03C.US_epad-10.4.2.17-20121018
I plugged in the USB to my Windows XP laptop for the first time today and ofcourse I am missing the drivers. I went to ASUS website and couldnt figure what I need.
1. Does anyone have the ASUS Sync that I need on my laptop
2. Also does anyone have the drivers that I need on my laptop so my ASUS is recognized. I installed some drivers from the xda forum to use the DebugFS Root but got a message that I need to install the latest drivers. Does anyone have them or can tell share a link for me to get them.
All I want basically is to have the current drivers on my laptop and the ASUS Sync thing and be able to ROOT my tablet. Most of the threads I read are for the Android Version ICS 4.0.
Any help on this is greatly appreciated
Thanks
RB
ramez75 said:
Hi to All,
Well I got an ASUS TF201 March 2012 and I never messed with it much, just net surfing and watching movies and listening to music....
*SNIP*
1. Does anyone have the ASUS Sync that I need on my laptop
2. Also does anyone have the drivers that I need on my laptop so my ASUS is recognized. I installed some drivers from the xda forum to use the DebugFS Root but got a message that I need to install the latest drivers. Does anyone have them or can tell share a link for me to get them.
All I want basically is to have the current drivers on my laptop and the ASUS Sync thing and be able to ROOT my tablet. Most of the threads I read are for the Android Version ICS 4.0.
Any help on this is greatly appreciated
Thanks
RB
Click to expand...
Click to collapse
Asus Suite including Sync:
http://support.asus.com/Download.as...ite_v1_0_41.zip#ASUS_Pad_PC_Suite_v1_0_41.zip
I just went through the unlock part yesterday so fresh in the mind it ASSUMES AN SD CARD IS INSTALLED and WINDOWS OS!
Asus Unlock Tool:
http://support.asus.com/Download.as...ck_Device_App_V6.apk#UnLock_Device_App_V6.apk
Get TWRP for TF201Jellybean:
TWRP Page
On that page are instructions including a download link for JB BOOTLOADER ONLY! MAKE SURE YOU GET THE RIGHT TWRP FILE FOR YOUR DEVICE. THE ICS ONE IF YOU ARE ON ICS, OR THE JB ONE IF YOU ARE ON JB:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
Download bin4ry's root tool to get the ADB file
When that is downloaded you can compare the MD5 hash because its a good idea to do that. You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it saysthe files MD5 hash is on the download web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Then I downloaded Ultimate Backup Tool from here:
http://goo.gl/iOUwe
Unzip it so you have fastboot.exe
Rename the TWRP you downloaded to TWRP.blob and copy it to where you have fastboot unzipped.
Finally download SuperSU zip file from:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Now we need to unlock the device. Copy the unlocker APK to the SD card. Run a file explorer on our tables and browse to the SD card (/Removable/MicroSD). Tap the APK to install. Once installed run the Icon for the unlocker and follow directions. There are several warnings etc.. You will need wifi connected and it will unlock your device and VOID YOUR WARRANTY!.
The unlock will take a few minutes. When it is successfull you will see a notice on device boot up that says the device is unlocked.
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
if you don't get the command window here option then you will have to open a command prompt. open the run dialog and type CMD and hit enter. This will get a dos command windows. Use the change directory (CD) command to change the current folder in the DOS window to where your fastboot file and TWRP.blob are.
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
Let it runs its course. When done I had a black screen with ASUS in the middle and a blue-ish bar across the bottom that was filled. I had to hold power until it rebooted.
Once I confirmed my Stock OS loaded I copied the Super SU zip file we downloaded above over to the device via the USB cable to the root of my SD card. Once the copy complets shutdown the device again.
Once off, power it on and press and hold both the power buttons and volume down again. When the menu appears you should already have RCK (recovery) hightlighted so press volume up to load TWRP recovery.
Once TWRP loads the top left option is "Install" tap that.
You will see a few choices, select the radio button to install from SD card (external source it may say). Tap the super su zip file: Superuser-3.1.3-arm-signed.zip to choose it.
Slide the slider at the bottom to the right.
This will flash superSU to your device. When done, reboot (should only take a few seconds).
When you boot up SuperSU is installed.
To test root with ADB:
Your tab must be plugged in to the USB port of the computer of course.
If you installed the SDK tools it is there or use the one from bin4ry's root tool as follows:
Unzip the downloaded root tool from bin4ry mentioned above. Use the command windows to change directory of the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the command sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Edits:
I have editted this based on questions below to make it more complete..
First Thank yo uso much for taking the time and sharing the good info. Ofcourse there is alot of foreign terminology you have used and I will need to read you reply a number of time till it soaks in and I am sure I will have follow-up questions.
So it seems the only way I can get to root my TF201 (running JB) is to unlock it which means losing the warranty. Well if thats the only route then so be it....
I guess first thing is to successfully unlock the TF201
hx4700 Killer said:
Asus Suite including Sync:
http://support.asus.com/Download.as...ite_v1_0_41.zip#ASUS_Pad_PC_Suite_v1_0_41.zip
I just went through the unlock part yesterday so fresh in the mind it ASSUMES AN SD CARD IS INSTALLED and WINDOWS OS!
Asus Unlock Tool:
http://support.asus.com/Download.as...ck_Device_App_V6.apk#UnLock_Device_App_V6.apk
Get TWRP for TF201Jellybean:
http://teamw.in/project/twrp2/93
On that page are instructions including a download link for JB BOOTLOADER ONLY!:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
When that is downloaded you can compare the MD( its a good idea to do that). You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it says on the web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Then I downloaded Ultimate Backup Tool from here:
http://goo.gl/iOUwe
Unzip it so you have fastboot.exe
Rename the TWRP you downloaded to TWRP.blob and copy it to where you have fastboot unzipped.
Finally download SuperSU zip file from:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Now we need to unlock the device. Run the unlocker tool you downloaded. For here its fuzzy for me because I found the APK file I got from the Asus download and copied it over to my tablets SD card via USB. Then I used the built in file browser to find it on my SD card and ran it. By whatever means you will need to run the unlocker tool on your tablet to unlock. You will need wifi connected and it will unlock your device and VOID YOUR WARRANTY!.
The unlock will take a few minutes. When it is successfull you will see a notice on device boot up that says the device is unlocked.
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
Let it runs its course. When done I had a black screen with ASUS in the middle and a blue-ish bar across the bottom that was filled. I had to hold power until it rebooted.
Once I confirmed my Stock OS loaded I copied the Super SU zip file we downloaded above over to the device via the USB cable to the root of my SD card. Once the copy complets shutdown the device again.
Once off, power it on and press and hold both the power buttons and volume down again. When the menu appears you should already have RCK (recovery) hightlighted so press volume up to load TWRP recovery.
Once TWRP loads the top left option is "Install" tap that.
You will see a few choices, select the radio button to install from SD card (external source it may say). Tap the super su zip file: Superuser-3.1.3-arm-signed.zip to choose it.
Slide the slider at the bottom to the right.
This will flash superSU to your device. When done, reboot (should only take a few seconds).
When you boot up SuperSU is installed. ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Click to expand...
Click to collapse
Yes, unlock it. There is no root method for tf201 on JB outside of unlock. An exploit may come up some day but nothing soon I would wager.
I tried to organize it by Al the stuff you need to download first. Then steps to use what you downloaded. It you follow it precisely things would become clearer.
Hi,
Ok I was going through the instructions and downloading all the necessary files and I ran into an issue with downloading the TWRP for JB. Well the link you have allows me to download either the *.img or the *.blob extensions. So I went ahead and downloaded the *.blob extension. I did the MD5 as you recommended and visually checked it with the image on the website and they dont match. I got the below
"b6bae17dac81a126d5d3ad8e27fd5007" which is entirely different than the one on the webpage. I also tried the *.img and no luck there. So I stopped. What do I do now where can I get the TWRP
Thanks
hx4700 Killer said:
Get TWRP for TF201Jellybean:
http://teamw.in/project/twrp2/93
On that page are instructions including a download link for JB BOOTLOADER ONLY!:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
When that is downloaded you can compare the MD( its a good idea to do that). You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it says on the web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Click to expand...
Click to collapse
hx4700killer
I did some googling and found the below link
http://forum.xda-developers.com/showthread.php?t=1510737
the link has "Direct apk link (dropbox)"....Is this what you referred too? I downloaded the file, should I move it to the SD card and run it from within the tablet?. Is there a way to run an apk file.
Also
I downloaded Android SDK on my laptop. I run the eclipse.exe as per the instructions on the website but nothing happens
Thank you
RB
Download the APK from the link I gave above. It comes straight from ASUS. I had gotten it 2 months ago and I guess I thougth I had run an installer and copied the APK from there but it is in fact just an APK to download directly.
When you copy it to the SD card nothing is needed to run it. Just tap on the file in a file explorer on the tablet and it will install itself. once installed run the installed unlock app and follow the directions.
The link from ASUS has a zip file. So i did download it and extract it to the SD card. Moved the SD card to the tablet but there is no apk file.....Also do i use the twrp file even if the md5 didnt match.
Thanks
Sent from my Transformer Prime TF201 using xda app-developers app
ramez75 said:
The link from ASUS has a zip file. So i did download it and extract it to the SD card. Moved the SD card to the tablet but there is no apk file.....Also do i use the twrp file even if the md5 didnt match.
Thanks
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
The second link that says it is for the unlock tool is the APK.
Ok the unlock worked successfully. So my TF201 is unlocked.
Following the rest of your post, next thing on the hit parade is to have the correct TWRP for JB (Open_recovery_TWRP.blob). At this point the MD5sum using WinMD doesnt match the image on the website. Do I still go ahead and use it or will it cause issue....
Ofcourse I dont understand what is the use of the MD5sum number
Thanks
hx4700 Killer said:
Download the APK from the link I gave above. It comes straight from ASUS. I had gotten it 2 months ago and I guess I thougth I had run an installer and copied the APK from there but it is in fact just an APK to download directly.
When you copy it to the SD card nothing is needed to run it. Just tap on the file in a file explorer on the tablet and it will install itself. once installed run the installed unlock app and follow the directions.
Click to expand...
Click to collapse
ramez75 said:
Ok the unlock worked successfully. So my TF201 is unlocked.
Following the rest of your post, next thing on the hit parade is to have the correct TWRP for JB (Open_recovery_TWRP.blob). At this point the MD5sum using WinMD doesnt match the image on the website. Do I still go ahead and use it or will it cause issue....
Ofcourse I dont understand what is the use of the MD5sum number
Thanks
Click to expand...
Click to collapse
The MD5 is confirmation that what you downloaded matches what was uploaded to the server. It runs an algorithm against the file contents and generates that long number. When you compare the number to what is on the server page they should match.
If they don't match then HELL NO do not flash it or you will have a bricked device. Redownload it and don't flash anything unless the MD5 matches.
I totally missed that you posted this above or I would have told you sooner.
Thanks, well then i cant use that link i cant get the MD5 to match. I will google and see if I can find a twrp file that will work for me
hx4700 Killer said:
The MD5 is confirmation that what you downloaded matches what was uploaded to the server. It runs an algorithm against the file contents and generates that long number. When you compare the number to what is on the server page they should match.
If they don't match then HELL NO do not flash it or you will have a bricked device. Redownload it and don't flash anything unless the MD5 matches.
I totally missed that you posted this above or I would have told you sooner.
Click to expand...
Click to collapse
ramez75 said:
Thanks, well then i cant use that link i cant get the MD5 to match. I will google and see if I can find a twrp file that will work for me
Click to expand...
Click to collapse
This is the MD5 hash that you should get:
19d93f4ec4685b8124468684eb2913fc
This is the exact download link I used for my TF201 running the most recent JB Update:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
The file you get is: openrecovery-twrp-2.3.1.0-tf201-JB.blob which is the one I say to rename to twrp.blob
I would NOT flash anything not from the source on this one. If its wrong your device is trash.
Hi again,
Ok so i got the correct TWRP.blob and I changed its name and put it in the folder with fastboot.exe. i plugged in my tf201 to my laptop followed the power volume sequence. I held the shift and right clicked on the folder but i didnt see "Open command window here". So how do i got about that. Do i use the "cmd" in the run from start to open the black dos screen and change directory (cd..) till i get to the folder that has the fastboot.exe
Thanks
hx4700 Killer said:
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
...
Click to expand...
Click to collapse
Yes, just open CMD and "cd" your way to the directory. Just make sure you end up inside the directory (ie. "...\UBTv1.3.2>")
ramez75 said:
Hi again,
Ok so i got the correct TWRP.blob and I changed its name and put it in the folder with fastboot.exe. i plugged in my tf201 to my laptop followed the power volume sequence. I held the shift and right clicked on the folder but i didnt see "Open command window here". So how do i got about that. Do i use the "cmd" in the run from start to open the black dos screen and change directory (cd..) till i get to the folder that has the fastboot.exe
Thanks
Click to expand...
Click to collapse
Followed all the instructions and seemed all were successfull. I see a Superuse icon created. What do you mean by ADB? and what will yield root when I type?, where do I type?. I dont understand the last sentence, please can you empahsize on it
Thanks again
hx4700 Killer said:
ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Click to expand...
Click to collapse
ramez75 said:
Followed all the instructions and seemed all were successfull. I see a Superuse icon created. What do you mean by ADB? and what will yield root when I type?, where do I type?. I dont understand the last sentence, please can you empahsize on it
Thanks again
Click to expand...
Click to collapse
Lol, guess I didnt include one of those in the downloads. After flashing TWRP I assume you "Installed" the superuser zip? This is what roots the device.
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
http://ul.to/xdevcthz
Your tab must be plugged in to the USB port of the computer of course.
Download the ZIP file and decompress. Use CMD to change directory to the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
Adding:
i just remembered that you said you downloaded the android SDK. ADB is in amongst those files as well.
By the i still didnt follow the below instructions but it seems i am already rooted because i was able to download titanium backup. So what will the below steps give me more.
Also how do i get rid of apps like Amazon kindle??.....
Below you say that you used the method from binary but you also say it doesnt wok with the prime. So i presume tf201 is the prime, so i still follow the below right
hx4700 Killer said:
Lol, guess I didnt include one of those in the downloads. After flashing TWRP I assume you "Installed" the superuser zip? This is what roots the device.
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
http://ul.to/xdevcthz
Your tab must be plugged in to the USB port of the computer of course.
Download the ZIP file and decompress. Use CMD to change directory to the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
Adding:
i just remembered that you said you downloaded the android SDK. ADB is in amongst those files as well.
Click to expand...
Click to collapse
ramez75 said:
By the i still didnt follow the below instructions but it seems i am already rooted because i was able to download titanium backup. So what will the below steps give me more.
Also how do i get rid of apps like Amazon kindle??.....
Below you say that you used the method from binary but you also say it doesnt wok with the prime. So i presume tf201 is the prime, so i still follow the below right
Click to expand...
Click to collapse
What I meant was I use ADB from that root method from bin4ry. He includes ADB.EXE and needed DLL files so its a quick one stop shop for ADB.
Does the adb shell command give you anything? No its just proves root is available. Rootcheckers can also do it. ADB is just a way in to your device from a desktop machine.
I have never removed an APP but I believe removing its APK file from /system/app folder allows it to be removed or does remove it. ( i would save it somewhere in case you need/want it back)
Thank you for an easy to follow way to root a 4.1.1 JB OTA TF-201. It worked exactly as you described.
You may want to let some of the noob users know what in each zip file they need. It really helps if all the files you download are in one location unless you are familiar the windows command line.
After breaking the screen on my phone I spent the following months reading about how to extract data. It all comes down to enabling ADB debugging and having your computer authorised. Usually this can be done from recovery and you're good to go. However, if you have a broken phone that is fully stock, with ADB disabled and with no custom recovery support then your data is as good as bricked. Such was the case with me when I broke my rare Samsung G360G. However, my phone was supported by CF-AutoRoot by Chainfire, and this gave just the opening I needed to go full wide.
Prerequisites:
Your phone needs to be supported by CF-AutoRoot. Check on there and the new site linked for support of your phone. If it's not there then you will need to download a stock ROM and use the CF-AutoRoot site tool to generate a root package for you. But that is outside the scope of this tutorial. This procedure has only been tested on Samsung. Your phone should have a minimal working charge.
https://autoroot.chainfire.eu/
This tutorial is also based on Linux. It should be translatable to Windows and Cygwin. But for simplicity I'll just use the method I used on Linux. However, if using Odin like I do, you'll need Windows to finish it off.
Aside from this it assumes files in are named in a particular format with a certain file format.
Tutorial:
1. First you need to download a CF-AutoRoot package for your phone. Won't get far without it.
2. Open up a terminal in Linux. We need to download some depends so enter this command:
Code:
sudo apt-get install android-tools-adb android-tools-fsutils
3. We need to extract the archive contents out. Create a suitable folder inside your home folder to build the patch in and cd to it. This uses an example file named CF-AutoRoot-example.tar.md5. Substitute with your actual archive name. Like so.
Code:
mkdir cfar-adb
cd cfar-adb
tar -xf CF-AutoRoot-example.tar.md5
4. There should be a recovery.img and a cache.img.ext4 extracted out. We just need to modify the cache.img.ext4. But first we need to convert it to a workable format. From a sparse to a raw image.
Code:
simg2img cache.img.ext4 cache.raw.ext4
5. We need to mount the cache image
Code:
mkdir cache
sudo mount -t ext4 -o loop cache.raw.ext4 cache
6. The big one. Doing the mod. So now we need to modify the cfar cleanup script. We need to insert commands on the end to enable ADB and add the key to authorise the computer. The following will do just that in this fashion.
a)
You will need to load in the cfar-cleanup.sh file inside the cfroot folder from the cache point mounted. Locate the end and paste the following lines before the reboot and exit commands on the end. Don't save yet.
Code:
echo -n 'mtp,adb' > /data/property/persist.sys.usb.config
mount -o remount,rw /system
echo '' >> /system/build.prop
echo 'persist.service.adb.enable=1' >> /system/build.prop
echo 'persist.service.debuggable=1' >> /system/build.prop
echo 'persist.sys.usb.config=mtp,adb' >> /system/build.prop
chmod 644 /system/build.prop
mount -o remount,ro /system
mkdir -p /data/misc/adb/
echo '' >/data/misc/adb/adb_keys
chmod 640 /data/misc/adb/adb_keys
b)
Load up the ~/.android/adbkey.pub file in a text editor and copy the entire contents in the clipboard. Now back at the script locate that last echo command you pasted into it and set the cursor just after the first single quotation mark. Now paste the clipboard in! This will add your key in. Make sure it's only between the single quotes with no extra characters or line feeds. The lines will naturally split if they don't fit on screen. Otherwise it should be good to go.
c)
Okay now save the file. The above will enable ADB and authorise your computer on the main Android system after the rooting script has done it's work. Before it reboots normally.
7. We need to unmount the cache so it's ready for use.
Code:
sudo umount cache
8. We need to convert the raw image back into a sparse image.
Code:
img2simg cache.raw.ext4 cache.img.ext4
9. Okay were almost done. Now we repack the files into a new Odin archive. Choose a suitable new filename. Like I have done here with my example file.
Code:
tar -H ustar -c recovery.img cache.img.ext4 > cfar-adb.tar
md5sum -t cfar-adb.tar >> cfar-adb.tar
mv cfar-adb.tar cfar-adb.tar.md5
10. The final step! So now the new package is ready for use. We just to use Odin and flash it to the phone. Save the package to a USB stick if needed.
a)
Reboot into Windows. Or you can run it virtualised from Linux. But I prefer to use the real things when dealing with things of a delicate manner and working blindly. Unplug your phone from the computer if connected. Now load up Odin in admin mode.
b)
Just to make sure pull the battery from your phone. Give it a few seconds then put the battery back in and click the back cover on. Now hold down volume down, then home key, and finally hold down power. Wait for the vibration. Then release power after a few moments. Finally release the other keys. At this point press volume up briefly. You should have just put your phone blindly into download mode. I've done this numerous times.
c)
Plug your phone into your computer. After a moment you should see Odin respond with a device added. Usually the phone can vibrate also when it connects giving more positive signs. If nothing happens disconnect the phone from the computer and retry the last step again to put it into download mode. Took me a few tries before I could do it blindly. It helps if you have a working Samsung to test it out on so you can see what happens before you can only feel it.
d)
Now in Odin press the PDA (or AP) button. Select the cfar-adb.tar.md5 package you made up. If the package is fine it will pass the md5 test. Now press the Start button and watch it go! If all goes well it will upload recovery, cache, give you a pass and then the phone will reset. At this point it will be in the process of being rooted, enable ADB, then reboot. If something goes wrong then you may need to go back and check all the patched files. Then rebuild the package again. But be careful, if the ADB has been enabled in the build.prop file one time, you don't want to add it in again and create duplicates, no matter how keen. Once I had it added the only other major problem I encountered was using the correct adb key.
e)
Hopefully now your phone is rooted, has ADB enabled and is booting up normally. Give it a few minutes. You can even see signs of life in Odin with adds and removes on USB activity. Your phone should also vibrate at times. And making noises is also a good sign.
1.1. So I just cranked it up to eleven. Open a Linux terminal again and give it a test. With your phone plugged in.
Code:
adb devices
If all goes well then adb will find your phone as well as list your device as authorised. You can now open shell to the inside. USB debugging is now enabled.
Conclusion:
Well I hope this helps those who have their app data stuck under a broken screen. As long as it was to type in this tutorial It still took me less time to write this tutorial than to learn all that was needed and apply it to my phone. This ends here but for you it may be only the beginning. A next step would be a screen mirroring app which I think is a must have for visual feedback. And USB debugging opens up these possibilities. One thing to be careful of, in a related issue, is that just because you can use adb and the phone is also rooted doesn't mean it will all work at once. If you are tempted to "su" it in an adb shell and get right in there then SuperSU will ask for permission on a blank screen. As will also happen if you try to do an adb backup, it will ask for confirmation on screen. So just expect to work with USB debugging blindly unless you already have a screen mirroring app installed. If you don't have one installed that is your next step.
And on that note. Good luck!
Hi there,
Your tutorial on how to achieve this on Linux looks real neat and complete. Unfortunately, i'm on Windows and i would like to know if you would be able to rewrite this totorial for a Windows user?
I've been reading online for about a week and i've never saw such a complete guide to help newbies to ADB to be able to retrieve data on their locked broken devices.
Cheers!
Hi RaiM1986 and thanks for your kind words. Yes I wrote it so it would be useful to newbies and seasoned hackers alike. Plus I needed to write down some instructions in case I need to do it all again.
Looking at the tutorial it is a bit Linux-centric. I don't know how well it would translate to Windows. Though there would be Windows version of the tools used the main problem would be mounting the filesystem image and making modifications without corrupting it. Because of things like Linux file modes.
However the following tools may be of assistance.
ADB tools:
https://wiki.lineageos.org/adb_fastboot_guide.html
Cygwin provides Linux tools if needed:
http://www.cygwin.com
simg2img:
https://github.com/KinglyWayne/simg2img_win
For mounting the ext4 image:
https://www.osforensics.com/tools/mount-disk-images.html
img2simg and other tools:
https://forum.xda-developers.com/showpost.php?p=49235638&postcount=5
For the ADB key it should be in %USERPOFILE%\.android and other spots I've read of are C:\Windows\System32\config\systemprofile\.android
In case any of the above fails, since I haven't tested them, the easiest alternative might be to just download a Linux live CD, boot it and do the steps inside. Of course any work is lost when you shut it down. You could also boot it in VM program running on Windows.
Amazing guide, Hypexed! The amount of work you put in to figure this out is incredible.
However, I'm stuck on step 6c, where I'm supposed to save the cfar-cleanup.sh file. It's not letting me save it at all, either within the mount point or to another location, it says that I don't have permissions to save the file. I tried the 'sudo chown' to change ownership to try to edit the permissions, but that didn't work either with it still saying I can't have access to the file. Any ideas? There is probably a simple solution, but this is my first time really using Linux so I'm a noob. I'm using Ubuntu 18.04.1LTS installed, not live, dual-booted with Windows, if that's important to know
SpinningQyarks said:
Amazing guide, Hypexed! The amount of work you put in to figure this out is incredible.
Click to expand...
Click to collapse
Thank you for noticing. It really was the culmination of months of hacking and cracking. Not to mention research. I decided I had to write a guide so I could document what I did in case I needed to do it again. And of course if it helped anyone else.
However, I'm stuck on step 6c, where I'm supposed to save the cfar-cleanup.sh file. It's not letting me save it at all, either within the mount point or to another location, it says that I don't have permissions to save the file. I tried the 'sudo chown' to change ownership to try to edit the permissions, but that didn't work either with it still saying I can't have access to the file. Any ideas? There is probably a simple solution, but this is my first time really using Linux so I'm a noob. I'm using Ubuntu 18.04.1LTS installed, not live, dual-booted with Windows, if that's important to know
Click to expand...
Click to collapse
Sorry you got stuck. I can see some issues in my guide. Especially after trying to do 6c again. First I notice I didn't specify where to store all the folders. Somewhere in the home folder obviously but it looks like you sorted that out fine.
I have tested a working solution to the permissions problem. In fact two:
1. Locate cf folder in the cache mount point on the desktop and go into it. Now right click in the window to bring up the context menu and select "Open as Root". Open up the editor as before.
2.. In the terminal run the editor as root. For example:
sudo gedit cfar-cleanup.sh
I've tested this on Mint which is a "relation" of Ubuntu so should work the same.
Now the original permissions should be left intact. I checked and they didn't have the execute bit set which is unusual. It may help here to save your work on the file to a place you can save to in the meantime. So you don't get stuck again. And then unmount your cache mount point, extract the raw image again as per step 4 and remount as per step 5, if the permissions need restoring. They really should be as they are originally set in the image.
Then continue through to step 6 and beyond as you were.
Good luck!