Related
I got my HTC Hero on Orange in the UK last week.
I am getting an issue where a normally stable wireless network will be knocked out if i connect the Hero on Wifi.
I know its not the radio - connects fine on WEP secured work network and on the open connection on the train and at McDs
I have done a fair bit of googling and RTFM and basically found lots of router specific issues on Android phones but nothing that looks like the same issue i have encountered except one on the Android community forum where no one has a solution or suggestion i havent already tried.
XDA developers was a great help with unlocking and flashing a ROM to my Trion so i thought i would amend the post i made there and see if i get any more expert opinion on here. Apologies for the length of the post - will post ROM and build numbers if that helps (and someone tells me where to look on the phone!)
Conscious this is a lenghty post (hello all!) but thought as i struggled to find anything it might help others in the same situation if i detail the issues and what i have looked at and hypothesised that i need to try to resolve this - in case anyone else has similar issues.
Netgear DGFV338 ADSL and Ethernet VPN & Firewall router.
Three wireless laptops and Sony Ericsson G900 all connect fine
Laptops run XP Pro, Windows 7 RC and a dual boot Vista/Ubuntu machine
desktops (all on gigabit backbone) run similar mix but only lose internet after router and modem have borked.
I am running this on a 20 MB Virgin connection which is usually faultless (3 years or so uptime not counting upgrades to the modem). Speed or timeout is not an issue - usually get between 12MB and 17MB DL and 700kbps UL
As soon as i connect with the Hero i can use the Wifi but briefly (one web page, start to load Market etc) - basically network detected and WPA-PSK TKIP connected, IP allocated and showing in wireless clients table of router.
I was running restricted MAC access and IP/MAC binding as i have ports open for the 360's and the Wii and want to restrict access to these devices only but removed this as part of the troubleshooting.
Shortly afterwards 20 seconds to 1 minute after connection the wifi drops - all connections lost, laptops lose connections and i lose connection to Virgin. It requires a full reboot of modem and router with the Hero off to recover a connection.
I wiped the router and all the security and all the other pcs etc work fine
then turn on hero - same story. So its not any of my more esoteric and paranoid router settings - i dont think.
Been on the Netgear forums and apart from some issues with the G1 and AES on home routers (mine is the full enterprise kit metal case) i find nada
Troubleshooting to date has narrowed it down to a couple of choices.
I know my router but i am brand new to this phone so some of this is pure guess work. One suggestion was ARP floods from multiple requests from phone getting it blocked by the firewall. Except traffic logs dont support this
Encryption support:
I use WPA PSK TKIP - this is detected as WPA Personal by the Hero but it can connect to router when i use the pass and this setting so i am working on the basis this is supported and correct.
I have read about issues with poor AES support on some routers which are fixed by a firmware update but have the same issue with other devices on AES so would prefer TKIP. So it could be encryption handling - initial connection works but error logging could crash the router if this is not working correctly
Anybody know if the WPA personal listed for connections is TKIP or AES?
I cant find any clear information on this.
Orange DNS or restricted gateway settings:
This appears to be the main symptom - i lose DNS support and therefore access to the internet. Turning off the Hero and reconnecting the laptop gives me access to the router but i need to reboot the modem to get my IP back (dynamic but changes every 12 months or so) the hypothesis is that the Orange connection in this build has the DNS hardcoded to go through their DNS servers which either Orange or Virgin systems dont like and boots my connection off the internet. Bit of a long shot but as i cant seem to find any way to fix static IP or DNS listings it could be the case as i cant switch to OpenDNS as i would to test this otherwise.
Only comes to mind as the first day with the phone (when Orange 3G was not active) i didnt have this problem - wifi on phone and laptop worked fine and both together
Bit of a longshot but the symptoms point to a DNS corruption if it isnt my router treating repeated WPA or DNS requests as a DOS attack. It could be DHCP creating errors but i can bind a MAC to specific IP to override this on the router. It sees the Hero, recognises the MAC and adds it to the restriction whitelist.
I havent checked ARP logging but that theory could pan out as its unlikely DNS would take down the router and modem - ARP or DOS lockdown could.
WiFi Channel
I run channel 11 due to neighbours wifi interference - Wii wont work at all with default channel.
I cant find the default channel information on the Hero but would assume it is 6 like most devices.
this one is strange - if it is the Wifi Channel then seeing the router should be a problem and connection shouldnt happen at all. It seems unusual to allow a connection but then crash the router as it is getting traffic on a different channel.
Could be another side effect of my routers firewall blocking suspicious traffic but seems unlikely.
As you can see a fair amount of things have been tried and i am still getting nowhere.
I need to try the encryption settings - does anyone know what the WPA setting is on the Hero and which encryption is supported/offered as standard?
I need to try changing my router back to channel 6 - does anyone know the default channel or how to change this in the Hero?
I need to try static rather than DHCP (but on the phone as already have tried forcing IP from router) - how do i get to these settings?
I need to try static DNS rather than Dynamic (router proxy of Virgin DNS)
I do have a Linksys WRT54g (three of them - one vanilla, one Sveasoft and one Tomato) which i use for outside events at work so i could swap one of those in but i suspect its a combination of Hero settings and router settings and i would like to get my main router set up (and keep the 8 ports) than swap back to the older WRTs and have to set up my Xbox 360s to get around the issue they have with being on a switch with a different subnet and not connecting to Windows 7 media centre
Basically i have tried most of the things i can try with the access i have on the phone and my knowledge of its default settings. What apps can i try to give me control of the networking and access section?
Otherwise, loving the phone. Better than the reviews and whilst not lightning fast its a damn sight quicker than an overclocked Trion i was running before (which worked fine on the same router and WPA Personal)
I am liking Android, glad to not be locked into the Apple tax/ecosystem and realising that WinMo has a looong way to come; even with the help HTC and xda developers offer to make better use of the hardware.
But i am heavy internet user and i cannot risk running my Hero at home on 3g when i have 500MB cap and a £3 a MB over limit charge with no notice from Orange to say i am near limits.
Any ideas? feedback? similar tales of woe?
Possible solution
Ohkaaay - found advanced settings so that helped! n00b error
Removed all security.
Changed channel to 6
connects
change to channel 11
connects but crashes router
reboot router and modem
change back to channel 6
change security to WPA Personal AES
connects
doesnt crash router
change to channel 11
connects
doesnt crash router
i appear to have a working connection and there is no way i would have made it through this post with the Hero on before i made these changes
weirdly i now have two identical entries in the wireless networks list
one says SSID_name Connected
two says SSID_name WPA Personal
remove remembered networks
Hero autodetects my SSID_name
sign in with AES password
two listings in wifi list again, same as before.
So it looks like WPA TKIP doesnt work on my router with Hero
AES does.
Channel 6 works with no security
Channel 11 doesnt
BUT... enable AES and Channel 11 works.
Guess the Channel 6 signal issue interferes with the TKIP or something
But i can report that on Netgear router WPA Personal AES works ok, which apparently on the pre-Cupcake G1 was a known issue.
Apologies to post and then reply to my own post but this might help someone
I can confirm your findings regarding WPA + TKIP vs WPA2 + AES.
I was running WPA + TKIP on a Linksys WRT54GX and experienced major connectivity issues with my Hero (although is did not crash the router). Did not experience this problem with my iPhone 3G.
Changed configuration to WPA2 + AES and Hero does now work without any issues.
I know this:
A. Is fairly obvious
and
B. Is not particularly helpful to you
However - if any device (regardless of whether it is buggy or not) is crashing your router, the router clearly has buggy firmware itself and is at fault. Router firmware should be robust to the unexpected, especially on wifi as this could be prone to denial of service attacks from anyone happening to be walking by. A router that is crashed by an attempted client connecting is a bad sign.
My personal advice would be to change to a decent standalone router. I use a Buffalo WHR-G54S flashed with Tomato firmware v1.21.8005 (with a seperate linksys Adsl2+ modem to provide internet). It is working flawlessly for me in WPA + TKIP/AES with no issues.
Hi,
so kernel sources are released. Is there any fix for hero's wifi problems? I mean dropping connection to AP. It is so annoying, I tried to do everything: change channel, mode, encryption... Nothing helped. It is Linksys wrt160nl. The same applies to other networks (some public hot spots).
I never had this problem with my Linksys WRT54GL...
mopodo said:
I never had this problem with my Linksys WRT54GL...
Click to expand...
Click to collapse
Could you paste your wifi settings? (mode, encryption mode, channel)
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
In case you haven't done so yet. Check out the Wifi Sleep Policy (access by pressing menu when you are in wifi menu). Normally the Wifi is turned off then the screen is turned off which can cause problem.
Similar problem with netgear wnr2000
mopodo said:
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
Click to expand...
Click to collapse
Hi got similar problem with my router netgear wnr2000.what i found funny is that when i reset the router, the phone connects perfectly to the router, but after abt 24hrs or so, it fails to connect.even if i reboot my phone, or reset the connection on phone.fails to connect.it will only connect when i reboot the router. i will try the 'aes' encryption n see if that helps.will update if it works
Thanks for your replies. Please could other members share their experiences, used options and solutions. This issue is too common to simply forget it. I am trying to find some kind of pattern or special options, it requires.
i dont have a problem with wifi apart from the wont find or connect to n-range device other wise i use wifi all the time it never drops, on stock orange uk firmware
I have a Sitecom WL-173 router.
I cannot connect at all. I can, but only with no or WEP security. That is no option for me.
When I use WPA or WPA2 my Hero does view my network, but does not connect.
I called HTC about this problem. He told me that they do not support all routers. He could not tell me which they support and which not.
mopodo said:
B/G Mode: Mixed
Click to expand...
Click to collapse
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
I have not had any problems trying to connect to WiFi networks, until i went over to my mates place where he has the Virgin 50MB B-Band and also a D-Link wifi-N router, and my Hero could no see the network at all, even though his iPhone connected straight away.
markoc84 said:
..., even though his iPhone connected straight away.
Click to expand...
Click to collapse
Augghhhhh... that hurts. Please, do not curse in this forum
tembares said:
Augghhhhh... that hurts. Please, do not curse in this forum
Click to expand...
Click to collapse
I'm sorry, it hurt even more when i was sitting there pissed off that my Hero wouldnt connect to the Wifi!!!
I have Virgin 50meg at home no problem at all, went to my GF's who has basic Virgin cable 10meg on netgear G and would not connect at all.
No idea why, as it should be all fine!
I have the same problem. It is so ****in annoying. My router is a Linksys WRT54G with Tomato firmware v1.25. Router is in "G only mode", WPA-2 PSK-AES security, I've set a static local IP for the phone, the phone's wireless is set to always ON... I basically tried everything I could think of. Ended up rooting the phone and installing Modaco 2.9... but didn't change anything. The only way I can get it work again when it drops is shut the Wi-Fi off then on...
Worst of all this is the problem seems widespread (but not universal)... What the **** does HTC think putting a ****in smartphone on the market with defective Wi-Fi... This is non-sense.
I really hope someone comes up with a fix or HTC updates this... otherwise we might want to start thinkin bout class action.
[email protected] said:
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
Click to expand...
Click to collapse
Is it a router setup or a Hero setting?
Pleaes explain if it's one of the options
probs here too ...
Linksys WAP54G v3.1
vs
HTC Hero
was working perfectly for first month or so, but has been getting worse and worse. ie, for a few weeks it would see the wifi but would usually fail to connect. now I'm lucky if it can see it at all!
have reflashed the wap with dd-wrt and experimented with a lot of settings. no diff.
have reflashed the hero with hero21 comunitry v1.6. no diff. (and also latest radio)
it just starts and stops when it feels like it.
oh, and my eeepc works fine on the same wifi, so I know it's not some wap screw up.
tried every tip I can find like 'use mixed mode' or 'g only', etc etc.
I am starting to think it's a hardware fault?
Same problem
Siemens Gigaset Tiscali modem with wpa psk2 tkip and T-mobile hero rom.
Sees the modem and connects with security first time but then says 'remembered out of range' on wifi settings but interestingly in wifi buddy it constantly has the syncing symbol next to the network.
Really annoying.
I've tried WEP and security off, wireless g only etc etc.
I have problems too but seems different to yours... but who knows : in fact i can't connect to wifi when the SSID is masked. Even if - or course - i put manuualy the ssid before with the good wep key. It happens on a livebox ( orange box )... but if i press the button to show the wifi network - it has to be made when you connect a device for the first time on this box - then it connects to the network... else it tells me that the network is out of range...
So does the wifi on hero has problem with masked SSID ? To compare i never had this problem - on the same box - with the touch diamond and the touch hd... and at home, not masking the ssid, the connection is ok without doing anything.
Ciao
Fred
I had the same problem with a Zyxel 660 router. I was able to connect to the wifi (WPA/PSK enable) but there was no data transfer possible.
So I updated the Radio ROM to the 63.18.55.06JU_6.35.08.29 version and it solved the problem.
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Hello there,
did you ever solve your wifi problem, I am currently running the latest TnTlite, and this just started happening to me as well. It just hangs in Obtaining Ip then it disconnects.... I have never had this problem before in fact was online on the tab last night, now it seems i cannot connect... I will see if I can connect in another location hope nothing happened to the Tab..... BTW I tried restarting as what was suggested but that did nothing for me also....
Are you broadcasting your SSID?
Can you take the tablet somewhere else and try connecting at a Star Bucks, or a library, or something. See if it connects ok there?
Also, if it doesn't connect anywhere. Try flashing a different ROM to see if it is just that one.
I've had the same problem. I do not seem to be able to connect to any wifi that is encrypted with WPA. At work, we are WPA and I cannot connect at all. At home, I have WEP and can connect. I thought it might be something with the wifi settings on the tab, and have searched and searched and cannot find anthing.
By the way, this is my third tab and none of them could connect to a WPA encrypted router. The first two I returned as defective. IF there is an answer, I would love to hear about it.
Also, this is my first android device. I have been messing with Windows phones for a long time...thanks to the great people on this site.
Sorry to hear about your wifi problems. Just to let you know my experiences, I've (in the week I've owned my tablet) run TnT, VegaN and cyanogen (latest of each) and have never had a problem connecting to my home wifi - I do not broadcast my SSID at all and use WPA2/PSK encryption. You both mention WPA - can either of you try WPA2/PSK?
But on saying all of that, if you can't even connect to your wifi point without any security involved, it sounds either:
1) Hardware - faulty tablet but you said you're on your third so that sounds unlikely. Remember, while the tablet supports wifi G/N it does so over 2.4Ghz so if you have a router that only does 5Ghz or is set to work exclusively over 5Ghz, your router will not see your tablet
2) Software related - Have you reflashed your kernel at all? Did you possibly install a kernel (not rom) that does not have wifi drivers installed or something similar?
I hope something above might help you....
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
bevbeng said:
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
Click to expand...
Click to collapse
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
1. if your tablet can connect to your neighbor's router, then problem lies between your router and the tablet.
2. is your router a linksys? what wireless router are you trying to use?
3. are you using mac address filtering? is dchp enabled on the router or by some sort of home server?
4. your tablet can see your router, but for some reaon they cant agree on how to talk to each other. i'm on a linksys wrt54gsv4 and havent had a problem, not with default settings or wpa2 or mac filtering or the custom firmware i eventually installed on it (ddwrt), tomato)
Sent from my GTablet-TnT-Lite using Tapatalk
bevbeng said:
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
You are ATTEMPTING to install TnT ROM? You dont need the Internet connection, just sideload it then install. Am i Right?
Then after you install the TnT rom, sideload also the Kernel TnT base with wifi fix.
http://forum.xda-developers.com/showthread.php?t=895825
Hope this will solve your problem.
Good luck
powercrazy said:
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
Click to expand...
Click to collapse
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Since the original posting I have got TNT Lite installed (using my neighbors router)
bevbeng said:
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Let us know if it solve. If not, I think you have defective unit.
Goodluck!
Click to expand...
Click to collapse
Something else occurs to me out of pure ignorance. I'm not sure how Android stores profile information. But I know with both mac and windows I've had occasion where "forgetting" the network and letting the device rediscover it has solved problems.
It sounds like you've been down that road already. However, it does bear asking. It's the more obvious things we often forget to consider.
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
RyuFDAC01 said:
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
Click to expand...
Click to collapse
Try to hold the power button for a long time and maybe it may turn back on. Before doing your last resort (disecting the tablet).
I had a problem with my wifi going into loops when I first got the unit. It would show it connecting/disconnecting/connecting/etc as described in the first post.
I had another router (both the same makes - Linksys WRT54G but different model numbers) so I tested the other router and I connected fine. I haven't gone back to test the first router yet and I am using the 2nd one.
The router I couldn't connect to has DD-WRT micro on it, and I haven't had problems connecting other wireless devices to. The one that is working fine with the g-tablet now has Tomato on it (it is a lower version number which supported Tomato).
Too bizarre... I now have this problem.
I received my gtablet today and installed clockwork mod recovery and vegan-tab ginger RC 1. Or, essentially, I followed the instructions here and got everything working. http://forum.xda-developers.com/showthread.php?t=865245
Wifi worked fine until the evening. Wifi is on, and in the settings under the SSID of my wifi network, it says Obtaining IP address for a minute until it says Disabled, network in range. I've done some common trouble shooting, like restarting, turning wifi off and on, forgetting the network and reentering password. That didn't work. My cell phone has a mobile hotspot feature and the gtablet CAN join that. I wonder what gives... I hope someone can help.
(This could be just coincidence, but it's about when I powered up my desktop computer. The desktop connects to the internet through a DMZ router that has a wired connection to the wifi router in another room. The desktop is now off and the gtablet still has this problem.)
Ok. Resetting my router fixed it. I never thought that my router could just "dislike" one particular device. I thought for sure something had to be wrong with the device. Forgive my ignorance!
G Tablet Wifi
I do not transmit my SSID and this has never been a problem with any of our laptops or netbooks. When I first received my G Tab and tried to connect to my network, even though I had entered the SSID and Passphrase correctly, it still would not connect. As soon as I set my wireless router to transmit the SSID the G Tab connected without any problems.
This is the first time I've encountered a problem of this nature. Comments?
This is what worked for me. I posted this in a similar thread as well.
Hey, I had WiFi connection issues too. I just got a Viewsonic G-Tablet with the Android 3.0 OS and have a D-Link DI-524 wireless router. It could see router and would try to connect, but would cycle and never connect. I could try to connect to other available networks in the area. It connected fine to an unsecure network, and when I tired to connect to secure networks there was a place where I could enter a network key/password. However, I noticed this option was not available on my network when I tried to connect. I reset my router which did not help. I then chose the option to add a network on the tab. This worked!! I was able to enter the key from the add a network option. I then told the "bad" connection to be forgotten. Hope this helps someone else, as I had looked on the internet for awhile for an answer. I was about to buy a new wireless router too!! Oh, I am using WEP too.
edit: ok when I power my tablet back on the same issue was happening. This time I could enter a network and the cycling still contiuned. I even forgot and re-entered the network. The fix this time was to reboot the tab. However, my internet has been acting up lately so IDK.
i now am using vegan, and i configured eveything many times on the g tab and it will not connect to my router. i restarted, downloaded the rom again, went back to tnt(it worked) then back to vegan and does not work.
i had tnt and it worked perfectly with my wifi, i have my mac address in my router. using wep, but i have tried open, even reconfigured my router.
it shows obtaining forever almost- then sez disconnected.
if i configure staticly it will show the antenna at the top, but still wont browse the net.
ive read similiar threads but no answers yet????
new-to-it said:
i now am using vegan, and i configured eveything many times on the g tab and it will not connect to my router. i restarted, downloaded the rom again, went back to tnt(it worked) then back to vegan and does not work.
i had tnt and it worked perfectly with my wifi, i have my mac address in my router. using wep, but i have tried open, even reconfigured my router.
it shows obtaining forever almost- then sez disconnected.
if i configure staticly it will show the antenna at the top, but still wont browse the net.
ive read similiar threads but no answers yet????
Click to expand...
Click to collapse
Just a suggestion?
I think the issue may be with WEP. Try using a different wireless security format instead of WEP, try WPA2 Personal or something other than WEP.
EG: I have my router security set to only allow certain mac addresses (as you did). I have it broadcasting on a channel that is not used by default (Ch6 - 9).
because other people around me don't care about that that makes for a lot of extra noise making it difficult for the router to diiferentiat between signals it can hear. Security set to WEP2Personal and I have network mode set to N only.
My GTAB connects almost instantly everytime coming out of sleep or upon boot up.
I have had problems conencting to WEP networks with Vegan as well. My wife who used TnT Lite doesn't have any problems with WEP. I use WPA at home and it works fine. WEP is pretty low security anyway (any more it's like being open), if you can you should be using WPA or WPA2. Also, make sure your router is configured for the MAC address of your tablet and that Vegan didn't change the MAC address to something you haven't configured your router for.
i just tried wpa and wpa2 personal etc. and it worked, but now my vista compu doesnt want to connect to wpa. so i cannot do it.
my router is a netgear with modem in one. i think it was a freebee that comcasst kicked in years ago. the firmware is specific comcast, so not all the settings are available.
but i tried and tried to get all my wireless working, and no go.
so vegan cannot be used with wep??? true or false?
if so ill go back to tnt i guess.....???
though i did feel vegan was a tiny bit faster...
It is a good thing that you couldn't use WEP.
WEP is as easy to break into as a high school gym locker and should be avoided at all costs. You might as well leave the connection open if you are not using some verison of WPA.
That being said, I had no problems connecting to a local WEP wi-fi network with VEGAn.
Suggestion:
Dole out some extra fins and get a new router..
I can only guess wep doesn't play well with the gtab.
i am still interested if anyone has wep with vegan?
im saving for a router now.
any suggestions on a comcast cable router modem in one.??
My suggestion is to use the wpa. Your vista computer can connect to it, you probably just need to work on the configuration.
it might be a bit of a hassle, but once you get everything going on wpa everything should run smooth....
So, i'm at a hotel in Branson. They have wifi with wep. Out of the 4 wifi enabled devices I brought, only the gtab is not connecting. It should also be noted that I never have trouble connecting the gtab to wpa networks.
Just thought everone might wanna know.
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?