i have listed my streak for sale its on the r1 4399 modaco build at the moment whats the best way to get it back to factory for resale cheers
do you have it rooted and recovery ?
you need to flash stock 3xxx rom and stock recovery available here.
there's instructions on modaco, which isn't loading for me unfortunately, so I can't link to them
how much u want for it?
£320 del boss boxed etc etc comes with 16gb card and i will throw in a 4gb card as well
fards said:
do you have it rooted and recovery ?
you need to flash stock 3xxx rom and stock recovery available here.
there's instructions on modaco, which isn't loading for me unfortunately, so I can't link to them
Click to expand...
Click to collapse
cheers buddy http://android.modaco.com/content-p...cess-acore-has-stopped-unexpectedly/page/20/# is this what i need sounds tricky or is it a doddle
Related
Hey all,
Been running ROMs on my Hero for a while now but I'd like to give the stock 2.1 a try and possibly stick with it until CM6 is stable. I know I can install the RUU but I don't really want to lose my recovery partition, I had to use the gold card method which was a pain in the ass.
I don't need root, I'd actually prefer to get a non-rooted completely default factory ROM if possible. How would I go about doing that or do I need to install the RUU and re-root it later if I want to? I've seen some "stock" ROMs floating around on the dev forum but all have been rooted and most seem to be running custom kernels too.
Any info or a link would be appreciated if I can keep my recovery part. Cheers
Villain Team has posted the GSM roms. There's pure stock and rooted stock.
http://www.villainrom.co.uk/viewtopic.php?f=100&t=1973
Alexander13 said:
Villain Team has posted the GSM roms.
Click to expand...
Click to collapse
Ahh brilliant, thanks for that!
OK so I an running the vanilla AOSP ginger edition ( on the left side http://viewsonic-gtablet-for-dummies.webs.com/rom.htm ) on the Viewsonic gtablet so how do I Overclock it do I need a kernel or just an app? If all I need is a kernel where can I get it and how do I install it and use it can I use CMW to install it? So pretty much just everything I need to know. And if it just an app which one do I use IM fine with paying but are there any free?
Thanks for everything that you can
Same site there's a kernel page.
goodintentions said:
Same site there's a kernel page.
Click to expand...
Click to collapse
you made the site right is CMW v08 and every time I boot into CMW do I need to take out my sd card or was it only the first time
Not necessary at all.
hi guys,
i am currently on Bionix-v 1.3.1 in my vibrant and i want to update to gingerbread.
so i wonder is it possible to upgrade vibrant to gingerbread and if so,can u link me to a way how to do that ?
thanks in advance
http://forum.xda-developers.com/showthread.php?t=1117990
flash GB bootloaders then you can flash any GB rom over whatever rom
theres ways to do it without the bootloaders but you'll get rainbow screen on boot and wont be able to see recovery
Flash using GB bootloader,it can fix rainbows and use any GB ROM
Sent from my GT-I9000 using XDA App
thanks guys
so do i have to install GB rom first and then flash ? or its other way around ?
and which rom do u recommond for vibrant ?
thanks
royalkalana said:
thanks guys
so do i have to install GB rom first and then flash ? or its other way around ?
and which rom do u recommond for vibrant ?
thanks
Click to expand...
Click to collapse
bootloaders 1st
cant flash straight to a GB rom from froyo without them
only rom i know of that can be is SH3.3, can flash that from froyo without them then flash whatever other GB rom you want through rom manager i think (i did this because i dont trust odin)
some have .tar files so you can flash them through odin to get to GB but voodoo sometimes messes up so you still need the bootloaders to go to recovery and disable it if it does
easiest way's to flash the bootloaders then just flash whatever GB over whatever
thanks again
i have flashed using gb boot loader
i am going to try Simply Honey 4.0 Revolution(JVQ GB 2.3.4) custom rom.
will post what happens
royalkalana said:
thanks again
i have flashed using gb boot loader
i am going to try Simply Honey 4.0 Revolution(JVQ GB 2.3.4) custom rom.
will post what happens
Click to expand...
Click to collapse
im on that
eveything works fine for me, abit of lag now and then but thats to be expected
theres a 2.3.4 problem with calls for some people but it seems random, iv never had it on 3.8, 3.9 or 4.0, some people have had it on all of them
hi,
all things working fine
but just wondering how to upgrade to Medium OR Large sized version of that OS.
i am currently on the light version of Simply Honey 4.0 Revolution(JVQ GB 2.3.4)
any ideas ?
royalkalana said:
hi,
all things working fine
but just wondering how to upgrade to Medium OR Large sized version of that OS.
i am currently on the light version of Simply Honey 4.0 Revolution(JVQ GB 2.3.4)
any ideas ?
Click to expand...
Click to collapse
theres only a large 4.0 i think so you'll be on that
ok done all things but guess wat !! phone cant receive calls now!! the problem is i have installed anOS designed for I9000 but my phone is tmobile vibrant. i see radio app too and video call option when calling.... :/
please someone tell me how to fix this thing ?
kyle51 any idea mate ?
guys i followed this thread and calling is ok now
http://forum.xda-developers.com/showthread.php?t=1169848
but in instead installing lite version in step 10, i installed the RC3 version.. it still worked
posted this because if anyone got the same problem someday
royalkalana said:
ok done all things but guess wat !! phone cant receive calls now!! the problem is i have installed anOS designed for I9000 but my phone is tmobile vibrant. i see radio app too and video call option when calling.... :/
please someone tell me how to fix this thing ?
kyle51 any idea mate ?
Click to expand...
Click to collapse
all GB roms are taken from i9000 because we dont have an official GB for our phones
dont know what its because of why calls dont work for some people, they worked for everyone on 2.3.3 i think
dont think radio works because there isnt any radio drivers for our phone so just uninstall it
video calling is there for the people that have put an FFC into their vibrant, it doesnt change anything
MIUI FTW
If you wanna flash a GB ROM trust me MIUI 1.29.11 is the way to go. You will be surprised how nice it is. Just give it a try.
P.S. I flashed it coming from a 2.2 ROM (trigger 3.3) without flashing bootloader. Just did the same old flashing process (wipe,wipe,wipe)
well,
i am on 2.3.4 and i want to reverse back to a 2.3 rom "Team Toxic "Crazy8".
so i do have to install old bootloaders according to them.
anyone got a idea how to do that ?
thanks
hold on to your pants
royalkalana said:
hi guys,
i am currently on Bionix-v 1.3.1 in my vibrant and i want to update to gingerbread.
so i wonder is it possible to upgrade vibrant to gingerbread and if so,can u link me to a way how to do that ?
thanks in advance
Click to expand...
Click to collapse
i came from bionix 131 was a great rom but get ready for bad assness
1. assuming you have cwm, flash cwm recovery, pick vibrant mtd, click yes then chose clockworkmod 2.x
2. go to download rom, go to cyanogen nightlies and pick perhaps the highest build number unless it has really bad remarks.
3. do the usual clear cache, clear dalv, flash it, fix permissions
let it boot and sit for a few and hold on to your panties...lol
nope gps does not work. but from what i remember bionix gps was pretty spotty as well
dont forget to wipe data, anyways reading some of the posts. simply galaxy is cool, love the blue but cm7 is waaaaay smoother and highly customizable. and you dont need to flash gb bootloaders. and if you want to go back once you flashed gb loaders, your gonna gave to get froyo boots back, from what i remember. cm7 has made it too easy to flash, was kind of tricky in the beginning, but did it for the fun of it
Hello community,
I want to install a custom ROM on my Vodafone 845 but I am a beginner in custom ROM's world so I need your help!I've seen many custom ROM but I need the best one for my phone.Which I should install?Eclair,Froyo or Gingerbread?Also I you can give me instructions I would be grateful!
Thanks in advance,
-->ka0
Guide and rom here: http://www.addictivetips.com/mobile...gingerbread-rom-on-huawei-u8120-vodafone-845/ and another rom here: http://forum.xda-developers.com/showthread.php?t=932605. You decide on what android version you want (see which you prefer).
First I want to thank you for your reply!Second I need a ROM with not many bugs.I think I'll choose this one:
http://forum.xda-developers.com/showthread.php?t=932605
What do you think?
ka0 said:
First I want to thank you for your reply!Second I need a ROM with not many bugs.I think I'll choose this one:
http://forum.xda-developers.com/showthread.php?t=932605
What do you think?
Click to expand...
Click to collapse
I would have went with CM7 since Gingerbread is newer than Eclair with many more capabilities and optimizations. It's still your choice though and if you just don't want gingerbread (for some reason), you could go with Froyo (linked in that thread) which is also newer than Eclair.
ka0 said:
Hello community,
I want to install a custom ROM on my Vodafone 845 but I am a beginner in custom ROM's world so I need your help!I've seen many custom ROM but I need the best one for my phone.Which I should install?Eclair,Froyo or Gingerbread?Also I you can give me instructions I would be grateful!
Thanks in advance,
-->ka0
Click to expand...
Click to collapse
you should definetely install a modded 2.1 rom because android 2.2 and 2.3 have still some bugs that are annoying.I would suggest these 2->http://forum.xda-developers.com/showthread.php?t=932605
and -> http://forum.xda-developers.com/showthread.php?t=741643&page=1 have fun and always have a nandroid backup
[email protected] said:
you should definetely install a modded 2.1 rom because android 2.2 and 2.3 have still some bugs that are annoying.
Click to expand...
Click to collapse
That is not true and is not supposed to be spoken in general (like you're saying it's like that for all devices).
Thank you all guys!!I'll see what I'll choose and I think I'll choose Eclair
Theonew said:
That is not true and is not supposed to be spoken in general (like you're saying it's like that for all devices).
Click to expand...
Click to collapse
trust me ive tried every single rom that is made for this phone and 2.1 roms seems to be the least buggy
Nothing so far!I can't figure out how to install it!I there any greek guide?
ka0 said:
Nothing so far!I can't figure out how to install it!I there any greek guide?
Click to expand...
Click to collapse
Follow the steps here: http://www.addictivetips.com/mobile...gingerbread-rom-on-huawei-u8120-vodafone-845/ (skip step 2 if you are going to flash a different rom).
There is any problem if I flash a different ROM?
So here is my progress:
1)I flashed my Vodafone 845 with Clockworkmod Recovery and I installed ROM manager
2)I tried to install the Roms from previous replys but no luck!After I press install the phone reboots
in install menu and then it gives me an error reboots right away!
What can I do?Thanks in advance
Sent from my Vodafone 845 using XDA App
ka0 said:
So here is my progress:
1)I flashed my Vodafone 845 with Clockworkmod Recovery and I installed ROM manager
2)I tried to install the Roms from previous replys but no luck!After I press install the phone reboots
in install menu and then it gives me an error reboots right away!
What can I do?Thanks in advance
Sent from my Vodafone 845 using XDA App
Click to expand...
Click to collapse
Try wiping data/cache partitions/dalvik cache then reflashing the rom.
I choosed this option from ROM Manager but nothing so far..
Here is the logs from ClockwordMod ROM Manager-Recovery
Hi!
I have an Canadian tab (GT-P7510XXKG6) I need to "restock" my tab.. anybody have the rom?
thanks
Yeah I also would love to get the Canadian Stock 3.1 rom to do a fresh reset.
Any ways of doing it with an Clockworkmod's backup ?!
Thanks
benyx said:
Any ways of doing it with an Clockworkmod's backup ?!
Thanks
Click to expand...
Click to collapse
Yes, you can use the nandroid backup to restock the tab.
Just flash the nandroid backup of the stock ROM (do a full wipe if you want)and then flash the stock recovery using ODIN.
yeah do you have a stock 3.1 touchwiz CANADIAN Clockwork mod backup. I could certainly use it if that's possible by you to post one. Thanks
dvirring said:
yeah do you have a stock 3.1 touchwiz CANADIAN Clockwork mod backup. I could certainly use it if that's possible by you to post one. Thanks
Click to expand...
Click to collapse
even if my Clockwork mod backup is rooted?
Just downlod your version from samfirmware.com
Problem is samfirmware doesn't have a canadian stock firmware version!!!
Sent from my MB860 using XDA App
Beep Beep, Anyone able to get the stock rom yet
Did anyone try here?
http://translate.google.co.in/translate?hl=en&sl=pl&tl=en&u=http://sampro.pl/
I have my cwm 3.1 stock back up just dont have it uploaded
Can you upload it somewhere for us to access?
Please...
Had newton rings problem with my brand new tab so had to return it . New one should arrive monday and i will back it up rite out the box . And host it
I have a copy of my Canadian WIFI 3.1 p7510xxkg6 stock unrooted cwm backup.
If anyone needs it PM me
Link now in sig
Link is broken !
Do you know how old 3.1 HC is? Ofcourse its broken silly! 3.2 has been released and is on sammobile.com
That was posted on 20th Jan, more like a revamp..
Thank you very much bertiespeed ! I was searching very hard to find it. It work's like a charm !!!
I'm also looking for Canadian stock rom. Can someone please give me the link to download it?
Thanks a lot.
OMG guys,
it doesn´t matters for which county the stock firmware is provided,
when you have anWIFI TAB!!
Just download a European or North American firmware, they all work the same way and offer several languages!!!
There you can download the latest firmwares-> Here!!!