so after finding out there is not an otterbox case for the g1 (booooo!) I have started to think that it would be great to find another styled case that is snug fit for the g1. That got me to realizing the lack of snugness in most g1 cases is from the keyboard and having to flip out the screen. I got my g1 off of ebay and it came with one of those little thin plastic cases and a little plastic case i slip the g1 into. Also the keyboard flipping out is the only flimsy part of the phone and I like my phones to have a solid build. THus...
does anyone use any cases have a very snug fit (like otterbox) but that does not allow the keyboard to flip out. I have begun to like the on screen keyboard especially after using it in landscape mode. Perhaps I can go without hte keyboard and then when needed, take off the case and be like 'ha! take that trendy iPhone user!!'..
so any cases that will enclose the g1 leaving the trackpad and buttons and screen exposed???? I guess the cases do not have to be made for the g1 but should be tested and fit snugly (did i mention i like a snug fit?)
cheers
austriker27 said:
so after finding out there is not an otterbox case for the g1 (booooo!) I have started to think that it would be great to find another styled case that is snug fit for the g1. That got me to realizing the lack of snugness in most g1 cases is from the keyboard and having to flip out the screen. I got my g1 off of ebay and it came with one of those little thin plastic cases and a little plastic case i slip the g1 into. Also the keyboard flipping out is the only flimsy part of the phone and I like my phones to have a solid build. THus...
does anyone use any cases have a very snug fit (like otterbox) but that does not allow the keyboard to flip out. I have begun to like the on screen keyboard especially after using it in landscape mode. Perhaps I can go without hte keyboard and then when needed, take off the case and be like 'ha! take that trendy iPhone user!!'..
so any cases that will enclose the g1 leaving the trackpad and buttons and screen exposed???? I guess the cases do not have to be made for the g1 but should be tested and fit snugly (did i mention i like a snug fit?)
cheers
Click to expand...
Click to collapse
Modify your own case....that's the only option. The G1 has a terrible design, Ill admit it. The cases that were released for this device were awful....believe me I owned six of them and guess what I use now...No case...just the stock pouch that I thought was "Dorky" when I got it.
I keep it in the pouch so that way the phone doesn't get messed up in my pocket...and when I want to use the phone I pull it out of the pouch and wala.
Not to mention that I really like the feel of the G1 with no case on it in my hand.
For the record though, the best case I ever owned was the Body Glove. Problem is that it starts to fall apart after awhile (like most things).
It fits very snug though, and I know thats a priority for you.
I use a silicone case which fits around the back and the chin. For the screen, I just use one of the plastic pieces from one of the harder cases. Seems to work without adding too much bulk.
do you guys have links to your cases??
still looking for a rocking otterbox style case for my g1..
is there any phone that has the same or close dimensions that an otterbox would fit on a g1?????
CaseLogic makes a nice, sturdy, magnetic-closure, horizontal leather belt-style case that fits the G1.
old_dude said:
CaseLogic makes a nice, sturdy, magnetic-closure, horizontal leather belt-style case that fits the G1.
Click to expand...
Click to collapse
oh sweet! Do you have a link to it? I have searched for a caselogic g1 case but cannot find one..
The pouch for the Nexus One fits very snug around the G1. You could try and con HTC outa one or see what a replacement costs.
Gekx said:
The pouch for the Nexus One fits very snug around the G1. You could try and con HTC outa one or see what a replacement costs.
Click to expand...
Click to collapse
oh cool, what did the second part of your sentence mean??
Also do you HAVE A LINK???
Related
Does anybody know if there'll be a pouch for the diamond 2 like for the diamond? Or simply will the Diamond pouch fit the diamond 2?
the diamond 1 pouch does not fit the d2
Don't think there is an official pouch, pdair have quite a few different ones available tho.
G
If you look at the Tracy & Matt unboxing video, its shows an HTC Pouch in the box. However, everyone so far has said it doesn't come in the box. Conclusion? I think there is/will be one, but it will a separate purchase like the with the D1.
I've been looking at the Beyza pouch for the Samsung Pixon. The Pixon has identical size stats to the D2 (well its 1mm wider), so if its just a pouch you are after, that may fit the bill.
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
galvinize said:
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
Click to expand...
Click to collapse
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Not sure how long delivery will take but will do when I get it.
Horizontal Pouch, HTC Brand
I bought this one: http://www.negrielectronics.com/touch-diamond-leather-pouch-p-2424.html
It is a Velcro closure and the phone does not fit well. further, it does not have a hard side to protect the touch screen. I assume this is a general case by HTC. I bought this, but I will probably continue to use the case from my Trinity, the fit is the same but this at least has some protection on the sides.
In a word, Disappointed. I am not sure why they skipped the case, and then fail to offer a decent one at launch time.
http://www.noreve.com/index.php
Looks like Noreve are going to do one too. Expensive, but nice, classy cases. See upcoming products at bottom of web page.
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Just be aware of these pouches
I did not get one with this or the TD1 ... with the TD1, the original one went on stock very quickly and I bought it for almost £10!
While the fitting was slim and snug, I couldn't help thinking that the tight fit had potentially caused light scratches on the rear (front I was not bothered as it had the protector on)
On the day I sold it, I did a very intensive clean on it and noticed there were indeed scratches that corrosponded with the pouch.
It only takes a small bit to be trapped in the pouch - you then slide the TD1 in and that bit goes down with it
I still don't know however what I want for my TD1, at the moment, I am using the original Ipod velour case that was bundled with I think the original 20gb ipods!
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-flip-top-_p04094c1213d039.html
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-pouch-type-_p04093c1213d039.html
or Krusell Luna fit
hsukirk said:
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Click to expand...
Click to collapse
is it possible to buy these pouches any where, as i personally like these the best
da_daman said:
is it possible to buy these pouches any where, as i personally like these the best
Click to expand...
Click to collapse
Yes, I prefer this pouch too. Unfortunately the HTC designation of that pouch is not mentioned on their website (i.e. the HTC PO S390 as for the D1), so a purchase seems to be tricky....
I just bought this http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=360151845729 since i want as thin as possible.
This isn't going to appeal to everyone since they aren't bargin basement cheap but I've just got one of these cases delivered this morning. I went for Nappa cowhide black B on the outside and red suede leather for the lining with no belt clip attached and hidden magnet closure. The case itself looks fantastic, stiching quality is excellent (not a loose piece of thread visible anywhere) and overall protection where its needed the most (on the screen) is hard to beat with the wrap over flap on the front. It took a couple of weeks from order to delivery, but for a case which is made to your own specification, right down to having your name embossed on the front, that isn't bad. If you want a quality product made to you want it, and personalised, give them a go, I'd definitely recommend them. They do a range of different styles so if a fold over horizontal pouch isn't to your liking have a look at the other options.
Nice, i just orderd one too
Nice cases, not cheap although they look very nice...
I have found my HTC Kaiser case that came with phone and I'll use that until something better comes along.
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Got the case yesterday, it adds quite a bit of bulk so if you're looking for a really slim fit then look elsewhere, other than that it is of good quality and has a nice professional look about it so is ideal for work. It also offers lots of protection for the device.
G
@galvinize: is it possible to take the belt clip off? doesnt look like in promo pictures - but in yours.
edit: could you please take a picture with the front up - or is it just a sliding case?
So I'm trying to find a nice looking case for my TP2, and as we all know, there are very few at this point. But the iPhone is very similar in size, just a but thinner. 'seems that everyone is making cases for these.
Anybody ever thought about trying an iPhone case just to see how the fit is?
http://forum.xda-developers.com/showthread.php?t=514158&page=9 scroll halfway down and poster Deiota got one from e-bay and seems to be happy with it.
I have not seen an iPhone case (other than a pouch) that would work for the Touch Pro 2. The iPhone is much thinner and the cases for it would not allow the keyboard to slide out on the Touch Pro2. I have tried the gel cover and the body glove case but ended up sticking with the pouch that came with the phone because it gives good protection and fits in my pocket. Good luck finding a case that works for you.
My wife has an Ipod Touch case that is a slide in type of vertical holster that works very well with the TP2. It was a little snug at first but it works great after a few tries. She clips it in her purse but it can easily be clipped to the belt and adds little depth. The clip swivels but does not free float. We got it a Walmart for about $15. Don't have the brand name handy.
Okay, I do not envy iPhone users at all, since I love my Fuze, and will soon have my Tilt2 (CAN HARDLY WAIT ), but I do REALLY envy their cases.
It seems like all cases I have found for HTC phones are pretty plain, and all similar design.
Does anyone know of any cases which are "different" like these for the iPhone:http://www.ultra-case.com/products_iphone3g.php
Also, why do iPhone cases seem to all have the screen uncovered (which I really like)? Is the screen sturdier because it's glass?
Thanks!
Did anybody here buy the holster from the tmobile store that they have that the g1 supposedbly fits in?
its around 24$ i think.
It was closed by sort of 2 clip things.
i'm primarily looking for a horizntal belt holster...
any ideas?
i have the body glove, it is in that price range. love it if thats what your asking
Theres a magnetic one, that fits a sidekick, it's what i use.
Body Glove
I have the Body Glove also and it's great. Perfect for the person (like me) who is rough on phones. And it looks good too.
I purchased the crystal gel case from boxwave It covers the G1 completely and offers excellent protection for when you drop the phone. I also bought the niteize side belt case. It clips on your belt and the elastic allows it to expand enough for the phone with the gel case on it to fit.This case closes with velcro so there are no magnets to create problems.
I got the one from the T-Mobile store last week but it's not the up and down one. But I have to admit was worth the money (even though I didn't end up paying for it love the gf) The one I got sits sideways but very nice and fits the phone well. Was a little snug at first but about 2 days later the phone just slides in to the case very nice.
Chedderknight said:
Theres a magnetic one, that fits a sidekick, it's what i use.
Click to expand...
Click to collapse
I talked to a TMO rep at the store and said no accessories for G1 should have any magnets due to the compass feature. He advised that if you are going to use an aftermarket case, to make sure it doesn't have any magnets. The case TMO sells are magnet free for the G1.
As for the holster, I have it and though it fits the phone snug, be careful as the screen is facing out so make sure you have a screen protector.
I just bought my G1 last 2 weekends ago with a tmobile store belt clip, fits perfectly, sturdy rotating clip for horizontal or vertical placement, gets annoying having to take it out to text or open keyboard but otherwise perfect...24$
the pleather tmo horizontal case with attached clip. it's soft but not screen friendly soft on the inside so the screen protector is a must. great product though.
One warning. If you have a tendency to forget to snap the buttons, make sure you're using a hard or jelly shell to make the phone fit snugly. the basic stretchy straps on the sides are just barely too long to make the phone 100% secure IMHO without it.
i personally like this one.
http://www.fommy.com/view-full-page.asp?divid=T-Mobile&model=T-Mobile+G1&cat=Cases&skuno=82922
you can use it with the screen either facing out for in for screen protection.
I bought this one by Seidio. I had one just like it for my Blackberry 8820 and loved it. I love this one too.
http://www.g1depot.com/seidio-spring-holster/4A24A4902.htm
Buy a bodyglove that has a belt clip for your g1 phone. You won't need to buy a suction cup or dash holder for your g1.
I clip it to my rear view mirror after pushing back the rear view mirror tab. Then I close the tab. Stays in place and very sturdy. It's even easier to see since it is under the rear view mirror and safer too!
I also can use the belt clip to hang the phone off my laptop. I don't clip it, just use the space between the glove and clip to hang it.
Also, the rubbery glove protects your phone if you drop it.
Getting my TP2 tomorrow, but really wondering about this...
Seeing pictures of the leather 'case' that comes with the TP2 elsewhere than in the US, is it the same case without belt clip in the T-Mo US TP2?
If it is, I want to be ready when I pick up my phone to get a belt clip equipped case as well.
Yeah man... the US tp2 comes with a gay looking leather case that has no belt clip. It looks like you have a man purse imo
yeah a man purse that slides into your pocket
You guys weren't lying -- that thing is pathetic. I don't know what the heck HTC was thinking when they packaged that.
The T-Mobile guy was also full of crap when he said they had one with a belt clip. Looks like I'll be doing some shopping online.
Thanks for the heads up on that one!
yes the cases htc give are always junk. i like the bodyguardz skin cases simply because the phone is already kinda thick and it does protect the phone. kinda of a pain to put on but after my 4th attempt throughout the years i think i did my best on the touch pro 2.
nko, does the screen protector part feel rubbery and make the touch screen a little less sensitive? I know it is like that with the Zagg on my friend's iPhone.
Got this hard thick rubberized case at the tmo store. It comes with a snap in/out belt clip if wanted. Seems to fit tp2 very well, and leaves accessible all need openings.
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
i am still using the case my dash came with for my tp2, it fits.
I just bought me a $5 case with belt clip. I just have to cut a hole for the ear jack. I'm not spending $10+ for a case
freakingwilly said:
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
Click to expand...
Click to collapse
Yeah, I think I'm just gonna use the belt clip case that came with my Hermes. It's just a little longer but it fits for now.
Has anyone installed a full body screen protector like the bodyguardz ones? I saw this one on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370244520409&ssPageName=STRK:MEWAX:IT
But I bought this for the time being: http://cgi.ebay.com/for-HTC-TOUCH-P...ries?hash=item4399b91c94&_trksid=p3286.c0.m14 (from what I've heard, these pop off easily)
This is a very delicate process for me. It's a balance between too bulky and too little protection. I want it to be able to survive it's first dreaded drop without cracking the case. I may just try to use both of them at the same time. When I'm doing physical work, I'll put the rubber case on, and when I'm at the desk, just have it out with the clear protector. I just wonder if you can clip on the rubber housing over the clear protector. The perfect thing for me would be to just have a rubber skin that slides over the whole body of the phone because I don't slide the keyboard out much anyway. That way it could be protected when I'm on the move and I can easily take it off when not.
I also bought one of those generic belt clip holders for $5: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310161485996&ssPageName=STRK:MEWAX:IT I had one before and their alright. The loops on the back will secure the phone to you if you're moving around but the clip may sag overtime though. I know I'll be replacing it eventually. The HTC OEM cases are much better, but no loops. There's never a perfect solution.
BTW: Does anyone know if the rubber case from the Touch HD will fit?
^^Just ordered one of those this afternoon. Looks similar to one I had before but can't beat $5 and then about $.50 in cashback haha
I know questions have been asked. And I realize all have their favorite cases. I am suggesting this thread as a "clearing house" of cases that definitely work with the car dock. If users could post links (and maybe photos) of these cases, I'm sure myself and many others would appreciate it.
I'm about to ramble a bit, sorry if I get a little off topic here and there...
I generally stick with skins, because with my EVO thats all that would work the car dock. With this new dock, the Photon can have a smallish case and still work with the dock if the insert is removed. I like that forward thinking from Moto regarding this, and the design of the dock is way better than the HTC one for the EVO. I also like how the skin will protect from a lot of things but add no bulk.
I just got in a number of skins from Phantom Skinz, and applied one to my Photon today. Overall, I like the product. It does make it a tad hard to get out of the dock with the insert in, because the skin material has a slight give to it (a soft plastic vs rigid). I wish that they included a little spray bottle, like ones I got from Body Guardz. They say to get a cup of warm water, add a touch of soap to it and dunk the skins into it. its hard to get just right, i ended up having a bit too much soap i think and theres some bubbles underneath that I dont think will go away. The fit of these skins is great. I've used some that are just a hair too big, and they end up snagging on things because they overhang. the corners where the skin wraps around the unit did have to be tweaked a bit: i had to ttrim a little off and make wider v cuts to make sure it didnt bunch up. There is a skin section for every side of the Photon, including the camera section. it doesnt cover the lens, and the fact that they had a piece for it impressed me. I would recommend this to anyone who likes the skin style protectors, but only if you're quite patient.
http://phantomskinz.com/motorolaphoton4g.aspx
This thread is a good idea. I can tell you that the case and holster that is sold by sprint does not fit, but only slightly contacts the material around the connector. I may trim it to see if I can get it to fit easily.
I can confirm that the OtterBox Commuter does not work. Also, even the little cheapo hard shell snap together cases do not work.
Incipio Feather Hard Case for Motorola Photon 4G
Hi all,
I recently purchased an Incipio Feather Slim hard case for my Photon 4G and so far it does seem to work with the car dock, though I had to add a little foamy tape on the right side of the dock so the phone would sit straight when it is in the dock, incidentally I am not using the insert that came with the dock, the website is myincipio dot com.
Problem is, I cannot find a classy leather horizontal case that will accommodate the phone with the Feather case on; everything I have been able to find so far looks cheap and flimsy not to mention too small. I guess one real advantage to sticking with an iPhone is that the after market accessory options available are so vast that if one just keeps looking for what they want they will most likely find it. Anyway, my 2 cents.
TPU cases don't work
I picked up a "TPU" case via eBay (pic attached). It's similar to the silicone skins except the material is a little stiffer and has a glossy finish (which I prefer).
Without the insert, the phone does fit physically in the dock, but the contact with the dock connector is poor. I may need to do what h8zgray wrote and that is to put some kind of pad on the right side of the dock to help hold up the phone. I think I have some left over weatherstripping I could use...
For the time being, I'm using an Arkon Mega Grip mount in my car.
I found it ironic that the dock doesn't work with some of the "official" Sprint cases, like the gray plastic two-piece case.
I hope someone can find a good case that will fit.
Update: Another member posted a comment in another thread that enlarging the notch surrounding the USB/microHDMI port could help make cases fit the car dock. There's a raised area in the dock surrounding the USB connector. I took a second TPU case and enlarged the opening for the USB/microHDMI ports and that made the case work in the dock. The connection is a little loose but I think adding a thin strip of padding to the right side of the dock might help keep the phone and case stable. So the stock TPU case won't work without this modification.