Hello ,just joined as i thought this was a cracking site with loads of info and the best place to find help .I have just bought a hd2 as i wanted the latest windows based mobile with a very large screen as i often use memory map and tom tom together ,i have been using both on the XDA ii with out any problems but the trouble was it had a seperate gps reciever ,also the camera was'nt very good .
Couple of questions i need help with please
I have installed memory map and it seems to run fine but is there a way of rotataing the screen on the hd2 from potrait to landscape ?
I have TomTom 7 Version 7.915 PPC ,will this work on the hd2 and is it as easy to install as it was on the XDAii i had ?
I am not very technicaly minded with these things so a very simple guide is what i am looking for .
I have used the search function but not with any success
Thanks in advance
Anyone help please?
You have to be careful which version of TomTom you install.
Here is the 7.917 version which will work with your HD2 - * TomTom v7.917 *
obviously you still need to buy the maps - as this site does not allow warez.
Sorry, I've no idea about Memory Map.
jasext said:
Hello ,just joined as i thought this was a cracking site with loads of info and the best place to find help .I have just bought a hd2 as i wanted the latest windows based mobile with a very large screen as i often use memory map and tom tom together ,i have been using both on the XDA ii with out any problems but the trouble was it had a seperate gps reciever ,also the camera was'nt very good .
Couple of questions i need help with please
I have installed memory map and it seems to run fine but is there a way of rotataing the screen on the hd2 from potrait to landscape ?
I have TomTom 7 Version 7.915 PPC ,will this work on the hd2 and is it as easy to install as it was on the XDAii i had ?
I am not very technicaly minded with these things so a very simple guide is what i am looking for .
I have used the search function but not with any success
Thanks in advance
Click to expand...
Click to collapse
Plenty of ways of doing that: -
BSB Tweaks - http://forum.xda-developers.com/showthread.php?t=589305
Gyrator - http://gyrator.brins0.net/
and probably some others I've forgotten
Try the search function on the forum. "rotation" and "search thread titles" turned up these results - http://forum.xda-developers.com/search.php?searchid=41837256
PS - Speaking from my own experience, I can confirm rotation of Memory map works using BSB Tweaks.
Brilliant guys, just what i was looking for
I have just installed tomtom and it works fine
Just off to have a look about rotating memory map
Many thanks and no doubt i will be back for more help
Can i install the bsb tweaks straight to my phone and everything will carry on working or will i need to reinstall memory map and tomtom after ?
Install BSB & carry on. No need to reinstall Memory Map, etc.
Trying to install bsb tweaks as you have mentioned ,i am trying to follow the video about flashing a custom rom mentioned on another thread , but when i attempt to run the custom ruu ( i downloaded it from this site seperate as one did'nt come with the BsB tweakes ) it keeps telling me" cant install check update utility "
This is what is on my screen
PB8110 XH-BC
SPL-1.66 HSPL XE
0x5
CotulllaHSPL 0x30
I have noticed that the spl is different on the video ,will that make a difference and how do i change it ?
Thanks again
jasext said:
Trying to install bsb tweaks as you have mentioned ,i am trying to follow the video about flashing a custom rom mentioned on another thread , but when i attempt to run the custom ruu ( i downloaded it from this site seperate as one did'nt come with the BsB tweakes ) it keeps telling me" cant install check update utility "
This is what is on my screen
PB8110 XH-BC
SPL-1.66 HSPL XE
0x5
CotulllaHSPL 0x30
I have noticed that the spl is different on the video ,will that make a difference and how do i change it ?
Thanks again
Click to expand...
Click to collapse
spl doesnt matter so long as it ends '.hspl'
The error you got sounds like you havent put the roms.nbh file in the same folder with customruu.exe.
Just those two files in a folder on their own.
BUT you do know bsbtweaks isnt a rom, right? its a program that you install like any other, nothing to do with customruu.
samsamuel said:
spl doesnt matter so long as it ends '.hspl'
The error you got sounds like you havent put the roms.nbh file in the same folder with customruu.exe.
Just those two files in a folder on their own.
BUT you do know bsbtweaks isnt a rom, right? its a program that you install like any other, nothing to do with customruu.
Click to expand...
Click to collapse
No did'nt know that ,how do i install the bsbtweakes program ?
Told you i was no good at these things
like all programs. Copy the .cab file to your phone, anywhere (most people have a folder on their sd card for such purposes) then on the phone open up file manager, browse to where the file is, and click it to run it.
Thanks very much
I have installed all these to the sd card
Setup.xml
000bsbtw.001
00tweaks.000
0cab4a7.004
manila 1.002
openne 1.003
When i run the setup file it takes me to opera .nut nothing happens
If i try to open anything else i get the message ,"there is no application associated ,run the application first .
Dont know what i am doing wrong ,someone please help ?
nope, you have extracted the cab. (The pc thinks cab files are a type of zip file)
Dont do that. Copy the single cab file (bsbtweaks.cab or whatever it is called) to the phone and click it to run.
Cheers for the help yet again ,i have installed it and it seemed to install correctly ,yet when i ran the application it said it needs a newer version of microsoft for it to work ,any idea what i need now ?
Thanks again for your help
sorry, never seen that before. does it work? if it does ignore the warning.
Just figured it out ,there is another file that i needed to upload and it is just the bsbtweake cab file ,many many thanks for your help again
ahhh microsoft framework, thats a different thing.
heres teh microsoft download page for it
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
though i think there is a much smaller version (the one above is 33meg) available on xda dev somewhere.
Your search keywords are ".net framework 3.5"
samsamuel said:
ahhh microsoft framework, thats a different thing.
heres teh microsoft download page for it
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
though i think there is a much smaller version (the one above is 33meg) available on xda dev somewhere.
Your search keywords are ".net framework 3.5"
Click to expand...
Click to collapse
It is on the same link that is on the previous page of this thread for the bsbtweakes ,
I should have read it properly first
hehe, easy to overlook even when things are right in front of you.
Related
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
I allreyd flashed a lot and did use a soft spl, but I do not find a proper
explanation what it is.
So, i Think it is the Bootloader ?
Can anyone tell me what a soft and a hard SPL is and does ?
For what do I need it ?
I just got my new Touch Pro bought in UK and now it is here in Germany and I want a german ROM on it as soon as it is available.
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threats
Greetings
Marcus
69reichertm said:
....So, i Think it is the Bootloader ?...
....Can anyone tell me what a soft and a hard SPL is and does ?....
Click to expand...
Click to collapse
Yep your right on that assumption sir The bootloader does alot of the low level handling of the startup process when you power on the device aswell as handling the process when you flash anything to the device...im sure its far more technical than that but thats a starter explanation Essentially you NEED a bootloader for the device to work at all, the case with many of the HTC devices...other devices are different most likely.
Soft SPL: (normally referred to as SSPL) IS loaded into RAM and allows you to perform some of the operations the standard bootloader would do, naturally with some extra functionality (explained later)
HardSPL: Same sort of thing except it is flashed to the device permenantly, so it replaces the HTC bootloader in your devices flash memory.
Both of these tend to safeguard against corrupting the device by having some fancy workarounds and updates to the processes built into the HTC SPL, and the best part is that they allow you to flash ANY ROM you wish therefor allowing us to use Cooked ROMs and various updates like radio updates and etc...frees the device up quite superbly.
69reichertm said:
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threads
Click to expand...
Click to collapse
Perhaps some mebers feel like adding a general HardSPL page to the wiki for FAQs like this to be answered better than "Search the forum.." since we know its not that good for finding anything.
The Wiki is there for everyone to use and edit so, learn and pass it on
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Hello !
Thank you for your advise.
One more question:
Should I install Hard or Soft SPL ?
I want to try out many ROMS - I think Hard is better, what do you mean ?
Thank you for your help
By the way:
I am a kind of technican - working in IT for nearly 18 years starting fron Novell, Banyan Vines and DOS up to Windows Vista. Also I am a kind of apple Guru, thats why I have certainly an iPhone 2G and 3G.
For business I use HTC devices sind the first MDA. But I lost track a little sind iPhone.
As I am a technic nerc I sstarted with th the Diamond touch again and I liked the device but i swapped this week to the touch pro because of the keyboard, SD Slot an flash light. I love this device.
By the way I also have the new Samsung Omnia 900 here and an unfun Nokia E71 ( I hate this old symbian - looks like last centuty )
So good night and thank you
Marcus
Jiggs1337 said:
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Click to expand...
Click to collapse
no, raphael hardspl is unsigned, means any rom is allowed, including HTC official roms.
69reichertm said:
One more question:
Should I install Hard or Soft SPL ?
Click to expand...
Click to collapse
you can only install hardspl. the job of soft spl is to install hardspl.
do not ever try any of the following:
- with SSPL, do not flash anything other than the included SPL NBH files. as extra protection the diamond and raphael SSPL's require htchacker sign (except the version jocky edited) and will reject anything that's not an SPL.
- and do not ever try to flash SSPL as an NBH, especially if it is a diamond or raphael.
Im sorry to disagree with your "don't tell me to use the Wiki".
But this is a fairly comprehensive answer to your question: http://wiki.xda-developers.com/index.php?pagename=SPL Questions? straight out the wiki.
Ta
Dave
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Jiggs1337 said:
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Click to expand...
Click to collapse
Yes - Everything Goes.
No.
Ta
Dave
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Jiggs1337 said:
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Click to expand...
Click to collapse
There are several things.
UC is short for User Customisation; it is in all the Kaiser ROM's nowadays. l3v5y's Raph ROMs also have it.
Links: l3v5y's ROMs & Main UC Thread.
I use UC to install programs, Provisioning XML (as part of UC) to change registry settings, my xcopyce application to copy folders and active sync to copy contacts, calender etc.
Ta
Dave
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Jiggs1337 said:
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Click to expand...
Click to collapse
I can't say. I haven't done it, what says you will lose all the info, the RUU or the thread? If it's the RUU, then you should be OK, it's probably the standard message that the proper RUU (used for carrier ROM upgrades) has.
UC is good, takes maybe an hour or two to get setup, but once done, you don't have to do it again and it makes flashing so much fun. I started with just installing CAB's and Copying files, then went onto ProvXML for my registry settings next. The latest version of Schap's Advanced Config (3.0) can export tweaks into a Prov XML file for you. It is worth it if you flash your ROM as often as I do.
Dave
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Jiggs1337 said:
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Click to expand...
Click to collapse
We are getting a little off topic of the OP now but...
Any tweaks done with schaps Advanced Config can be easiler exported using a "export" menu option.
If you export your registry after flashing, and again after you have all your settings setup right, you can Diff then using a Diff Program and copy the changes into your ProvXML file. Most PPC Regedit programs can export.
Any more on UC, I'd have a read of the UC thread and ask any questions in there. Myself and l3v5y keep and eye on it most of the time and should be able to help fairly quickly.
Ta
Dave
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Thank you for all the help - now lets start using the Touch - weekend is near
69reichertm said:
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Click to expand...
Click to collapse
lol, sure, there is only one package, and you simply click the EXE and it goes
http://forum.xda-developers.com/showthread.php?t=410150
Is it possible to use those backup softwares? Like Spb Backup for example that say "ROM Upgrade Mode — now it's possible to restore data after the ROM upgrade"? Instead of UC and such?
there is a IPL initial program loader (sort of bios)
a SPL secondary program loader (kinda like the ntloader)
and there is a service mode (3 color screen) (the flashprog)
then we have a RUU remote unit upgrader
mft masterfile table
mbr master boot record
and some other shizzle
the device switches the output of the internal usb when device is in 3 colorscreen to a service mode which allows it to overwrite the internal flashdrive .. pretty neat as what it actually does is switching to an internal flashprogrammer which programs the internal flashdrive. this is the same process as is used for your pc at home to update the bios.
the CID celloperator identification code (used for blocking certain rom upgrades)
enjoy..
Soft SPL quesiton
I have a SPV M700 and it's unlocked. I want to install Schaps rom. I have the folowing SPL version 1.07.000. I have't managed to install hard spl. Can I use soft spl to flash it? Can I permanently brake it?
ok....
here's the deal:
I've been using an OEM-package in mylast roms for tomtom version 7.915.
This has been working without troubles.
Now I cooked a new ROM based on new 21018 XIP/SYS
The device really flies and everything seems to working flawless....EXCEPT tomtom.
When I start Tomtom, in a flash I see the gray bootscreen but then immediately I get the error: 'Unable to start. Not enough memory is available.'
But I have more then 130mb program memory available so that can not be the issue....
I did not change anything to the OEM-package. So I guess it has something to do with the new SYS.
Do more people have this problem and/or does somebody now the fix....
Thnx all in advance for your help!!
Greetz Merten
p.s. I used the search function of course and saw a lot of similar errors but no sollutions.....
I am running TomTom 7.915.9196 (OK via a cab) on 21028.1.6.0 (just installed yesterday)
This is Da_G's simple kitchen plus the updated pack posted in that thread this morning.
Don't know if that helps, but I would be very interested in an OEM for TOMTOM if you can get it working?
crazyC said:
I am running TomTom 7.915.9196 (OK via a cab) on 21028.1.6.0 (just installed yesterday)
This is Da_G's simple kitchen plus the updated pack posted in that thread this morning.
Don't know if that helps, but I would be very interested in an OEM for TOMTOM if you can get it working?
Click to expand...
Click to collapse
I got the exact same oem-package working in M-rom v1.71!
So it really beats me why I get the error.
I tried cooking the rom again but still the error....
I am still cooking up my rom and so will reflash tonight - if you can post up your tomtom OEM I will take a look and try and flash it and see if I can get it to work? Maybe a conflict somewhere that might not be on mine as I do chaneg a number of the packages.
crazyC said:
I am still cooking up my rom and so will reflash tonight - if you can post up your tomtom OEM I will take a look and try and flash it and see if I can get it to work? Maybe a conflict somewhere that might not be on mine as I do chaneg a number of the packages.
Click to expand...
Click to collapse
Ok OEM can be found here in the map: packages
Package looks OK at first glance - hope to be able to try it tonight and will post back tomorrow with results.
If this doesn't work - you could try simply using the cab via UC etc as I do - I have checked and the cab of the same version in your OEM DOES work for me.
In fact, I think I might leave it in my UC, (but will flash tonight anyway with it just to see)
merten3000 said:
When I start Tomtom, in a flash I see the gray bootscreen but then immediately I get the error: 'Unable to start. Not enough memory is available.'
But I have more then 130mb program memory available so that can not be the issue....
Click to expand...
Click to collapse
I had the same problem some time ago, and it turned out to be SKtools automated Free-Ram shadow service that was causing this.
You dont happen to have similar software running (something that clears your RAM on the fly)?
GenghisZ said:
I had the same problem some time ago, and it turned out to be SKtools automated Free-Ram shadow service that was causing this.
You dont happen to have similar software running (something that clears your RAM on the fly)?
Click to expand...
Click to collapse
I tried new ervius packagetool: 5.3 and saw something about shadow service... will roll back to 4.3b1 and see if tool is the problem...
Thnx for the tip!
merten3000 said:
I tried new ervius packagetool: 5.3 and saw something about shadow service... will roll back to 4.3b1 and see if tool is the problem...
Thnx for the tip!
Click to expand...
Click to collapse
Nope, did not help...
OK - apart from the shortcut not being copied to programs - I didn't check the initflashfiles first - d'oh - it works.
I went to windows with file explorer and ran it from there - no problems.
Have flashed twice - it must be something else in your rom.
Does the page pool make any difference? or the filecache sizes?
crazyC said:
OK - apart from the shortcut not being copied to programs - I didn't check the initflashfiles first - d'oh - it works.
I went to windows with file explorer and ran it from there - no problems.
Have flashed twice - it must be something else in your rom.
Does the page pool make any difference? or the filecache sizes?
Click to expand...
Click to collapse
I always change my roms pp to 32mb...can that make a difference? I did it in v1.71 and tomtom worked fine...
I don't know - I have been around here long enough to know that your skills far outweigh mine. If it used to work then I see no reason for the change.
All I know is that my rom is based on Da_Gs really clean latest (ie 5.08) from his simple kitchen thread (from his post near the end not the first post) plus Eras2rs package updates.
The only other packages I add are a few utilities and personal tweaks. I import an advanced config xml as part of the UC process but that just ensures the various settings in Advanced Config are set to advised etc.
Hi,
I don't know if this can help but I got this same error message when the map isn't correctly activated.
Regards,
___________
TP - RomeOS 1.70
Harikoss said:
Hi,
I don't know if this can help but I got this same error message when the map isn't correctly activated.
Regards,
___________
TP - RomeOS 1.70
Click to expand...
Click to collapse
Maps work(ed) fine..
btw I bypassed the error by removing the OEM-package and made it a cab which is installed during system configuration. It takes more system space but this way it is uninstallable....but it remains a mistery to me why the OEM does not work in this SYS and does in 21014 SYS...
HI everyone,
I bought a HTC HD2 some days ago, and there was win mobile 6.5 and android 2.2 installed. THere were many problem on the Android OS, it was very slow, the auto-rotate function didnt work, the "water scale" didnt also work correctly etc. Win Mobile seemed to work properly...
Today, I installed android 2.2 on my storage card and everything is working fine so far. Of course, WIN MOBILE is on my phones memory. Before installing it, the phone had problems with the flashlight (dual flash), simply, it did not work. Now, it is also not working, neither under WIN Mobile nor ANDROID.
How can I check that it is a hardware failure ? Or maybe its ROM or something ?
Thank you
Please, some idea ?
What level is the battery at? As I think thart below 20% the flash stops working.
What happens in WinMo when you run the camera and select flash always on and then take a picture?
THanx for the response, I really need some help.
Under WinMo occurs the same problem, the flash is not working even if I set it to AUTO/ON/OFF.
I also considered that the image quality after taking a picture and comparing it to my friends phone, is more bad than his one
PLEASE, someone help ?
Anyone has an idea ?
vedolino said:
Anyone has an idea ?
Click to expand...
Click to collapse
Hi There
I'm not aware of any "diagnostics" modes to test hardware on the device but the first thing I would do from within Winmo is install a Torch App and try and use the torch, if the Torch app initialises the flash on the back of the phone then you know it's a OS fault whereas, if it doesn't you know it's a hardware fault with the flash module itself on the phone
Here's a link to TorchButton
http://forum.xda-developers.com/showthread.php?t=581382
Let us know how you get on
Thank You very much for the reply.
But I act as a noob.
I copied the whole unrar-ed folder to my SD and to phone, in both ways, when I try to start any of those files it says:
There is no application associated with ... Run the application first, then open this file from within the application.
How to run the application ?
Can someone just download the TORCH and explain to me how to install it
Would be very very thankful.
Can someone just explain me how to install or whatever the torch on my HD2 WIN Mobile 6.5.
THanx
anyone ?
thx
Do not unpack (unzip, unRAR) the file. Just copy it to your phone (or SD card). Use the phone's file explorer and find the file. click on it, and it will install.
.cab files are cabinet files, they pack other files inside them, just like zip files - but they are used in both Windows (the computer o/s) and the WinMo o/s as a unpack and install file (obviously the file should only be run in the desired o/s).
Thank You fred_up,
I barely did it, but the flash is still now working.
I hope its only the flex cable which is not too expensive, about 10 USD !?