I have the dlna.apk and the odex file was curious if there was a way to adb it back on the phone.. ( I removed it thinking I wouldn't use it )
I just don't know the commands for adb and if I try and just put them on sd card and install it says it is already installed but I know it is gone cause I removed it via titanium backup.
send it to me and let me see if i can do some work on getting it back on the phone. i took mine off too like you but dont have the dlna.apk
BRANDENDEUCE said:
send it to me and let me see if i can do some work on getting it back on the phone. i took mine off too like you but dont have the dlna.apk
Click to expand...
Click to collapse
http://www.mediafire.com/?hr510y2s9apihuy
Check the ADB threads and/or Root Explorer (it could probably do this too) for the commands.
As a last resort, if you really need it and can't figure it out.. just download the stock ROM in the dev forum and flash/restore it but you'll have to redo the settings so back up data with Titanium Backup.
Dlna.apk AllShare reinstall fail.
I'm using the Vibrant9 Eclair 2.1 rom which has removed Dlna.apk aka AllShare.
Any ideas how to get this reinstalled?
Some of my results.
When I try to install via the Vibrant file browser it I get the usual
"Do you want to install this application"
I click on Install and get
"Application not installed"
Tried to install via adb.
./adb install /SDK/app/Dlna/Dlna.apk
1175 KB/s (787522 bytes in 0.654s)
pkg: /data/local/tmp/Dlna.apk
execv /system/xbin/procrank returned -1
execv /system/xbin/librank returned -1
/mnt/.lfs: Function not implemented
execv /system/bin/parse_radio_log returned -1
[1] Killed pm install /data...
Tried to install while in adb shell, no errors untill reboot, got stuck on splash screen until it ended on a black screen, soft keys lit and stayed lit when I pressed them.
# install /sdcard/Dlna.apk /sdcard/system/app
# reboot
(black screen after splash loop on reboot)(adb shell active, can't gain su access though)
I've failed on trying to get it reinstalled too, anyone knowledgeable enough to fix this?
Bump... trying to get this working on FrankinTwiz...
Works fine on Bionix ROM, wonder whats different
I'm having the same issue. I can't get it to work on FrankinTwiz
Any luck?
I know this is an old thread, but has anyone had any luck at getting the Allshare app reinstalled with custom roms? I've googled to no avail.
u could try creating a .zip file and placing the dlna.apk in systems\app folder and flashing it in CWM.
For example, ur .zip file would look something like this.
C:\customzipfile.zip\system\app\dlna.apk
I havent tried it out though so not sure if it may work. Dont burn down my house if it doesnt. It just seems feasible.
Did you guys ever consider trying Bloater?
I'm trying to install it on my Nexus S, without success. Where should I put the Dlna.odex? When I installed the Dnla.apk, it says "installation succesful", even though it's not. Here's the log:
Code:
D/PackageManager( 332): Scanning package com.sec.android.app.dlna
E/PackageManager( 332): Package com.sec.android.app.dlna requires unavailable shared library touchwiz; failing!
W/PackageManager( 332): Package couldn't be installed in /data/app/com.sec.android.app.dlna-1.apk
I/InstallAppProgress( 7472): Finished installing com.sec.android.app.dlna
You can find the zip here, by the way: http://forum.xda-developers.com/showpost.php?p=7259961&postcount=5
Binary100100 said:
Did you guys ever consider trying Bloater?
Click to expand...
Click to collapse
+1 search and download
Samsung Allshare (DLNA)
pphi said:
I've failed on trying to get it reinstalled too, anyone knowledgeable enough to fix this?
Click to expand...
Click to collapse
Try serendipity7.weebly.com/add-ons . html
Hope this helps...
Related
For example I can't use reboot, it just prints
"not permited!"
Using adb it works fine.
I give it su access, I don't get it :/
the reboot binary doesn't like to be called from an app. have you tried shutdown -r?
kendong2 said:
the reboot binary doesn't like to be called from an app. have you tried shutdown -r?
Click to expand...
Click to collapse
Oh, ok. I think it works on some systems? Could it be replaced with better functioning one?
shutdown -r does shut down but doesn't boot.
EDIT
I have been looking around and none of reboot apps seems to work for Hero users and this is issue for Hero users only.
Couldn't anyone be able to fix this? I mean it works with adb, right? Wouldn't be possible to make it more functional as I suggested before?
ROOT achieved for 2.1 FW.
Sometimes the first method isn't always the best:
*edit*
A new app has appeared on the market called "z4root". This seems to root in one click.
Details are here.
Install this from the Market, press Root and you're away.
Old Methodm should it still be required:
This requires you to have 2.1 already (either Nordic, or other generic, or using Bin4ry's flashtool version here.
instructions and files as below.
Download the SuperOneClick (files attached) or original post here
Updated Superoneclick version 1.5.4
v1.5.4
Fixed superuser install issue
Added a prompt to tell you to allow superuser on your phone, for the test.
Fixed unroot.
It can take a while to ROOT - looks as though it is stuck in a loop. I thought it wasnt working but waited about 10mins and it worked.
If you wait longer and it still doesn't work, try untick/retick USB debug while it's running
Hey Presto - ROOT !
Thanks CVCHETAN for adding the attachments & tidying it up.. it was late
Remember you will probably want Busybox too - click Problems from within Titanium to download.
NOTE: If you're having no luck with this, it seems the PDANet client might install different drivers which help the process. If you're struggling this might be worth a try. Also ticking Unknown Applications allows it to send the SuperUser.apk has reported to help some users.
PdaNet Client is here.
Pre-requisites not mentioned in this post:
Working 2.1 X10
Drivers must be installed for X10 Debug mode - try adb manually to check
Some virus checkers might flag these files - this is because an exploit can be a security risk, but 100% virus free
You run this all on your PC - it connects to your phone and roots it from there.
Doesnt work for me, get failed! No ~~FU GOO~~ or something
Tried different versions of the app
Hmmm Barnacle isn't working quite as expected (even after setting athwlan0), but Titanium is definitely giving root...
will post a pic in a bit, have another x10 to update / root first
None of them work for me.
XperiaX10iUser said:
None of them work for me.
Click to expand...
Click to collapse
for titanium to work, update the busybox from titanium menu...
cvchetan said:
for titanium to work, update the busybox from titanium menu...
Click to expand...
Click to collapse
The problem was getting rooted in the first place, but here's how I got it working with yours and awojtas help...
Download the SuperOneClick.
Copied these three from my SDK tools folder...
adb
AdbWinApi.dll
AdbWinUsbApi.dll
...and replaced the ones in the SOCR folder.
Ran it, but when it was looping did this...
awojtas said:
then you may need to untick/retick USB debug while it's running
Click to expand...
Click to collapse
Then got...
Running rageagainstthecage...
ROOTED
Getting mount path...
/dev/block/mtdblock2
OK
Remounting system with read-write access...
OK
Pushing su...
1424 KB/s (26264 bytes in 0.018s)
OK
Pushing superuser.apk...
820 KB/s (196521 bytes in 0.234s)
OK
chmod su...
OK
Remounting system with read-only access...
OK
Click to expand...
Click to collapse
...and installed Titanium to confirm!
XperiaX10iUser said:
The problem was getting rooted in the first place, but here's how I got it working with yours and awojtas help...
Download the SuperOneClick.
Copied these three from my SDK tools folder...
adb
AdbWinApi.dll
AdbWinUsbApi.dll
...and replaced the ones in the SOCR folder.
Ran it, but when it was looping did this...
Then got...
...and installed Titanium to confirm!
Click to expand...
Click to collapse
awesome brother....
cheers to the root...
enjoy!!
SDK? Where did you get an SDK?
Jaxxer86 said:
SDK? Where did you get an SDK?
Click to expand...
Click to collapse
SE site..
wait ill zip it nd upload it
i didnt need to swap any files..
i downloaded the package on that link, it looked like it was stuck in a loop but i left it 10mins came back and it said worked.
only difference is that first time i did shell root - then i did a proper root afterwards, not sure if this makes a difference
very happy here..
Thanks mate!
thread moved to dev section and stickied..
should also say i had to download busybox in titanium.. click problems on the front screen.
Veryyyy happy.. not only is it rooted now but I get very slight credit for it.
If you've got the loop leave it running, about to do another handset now so will see whats different
Still cant get it to work, can anyone who got this to work write a step by step please?
it's very easy
you yust start the exe click on root now it tooks al very long times
(<10 mins) and in this time the programm try very often to root the device
then a message come up
and your device is rooted
I'm getting "Waiting for device..."
make sure you've got USB debugging turned on
after installing 2.1 it will default to off
It's turning on.
sweet thank you very much.
right, now to get rid of that blue....
According to Kaspersky Antivirus 2011, both the Superclicks contain trojans...
So I've tried to find an answer to this but to no avail....
I have Nero V3 working well, but I wanted to add back the "Audio Postcards" apk just for the wacky photo frames and effects. I've tried to install it both by getting the .apk and doing a prompted install = which looks all fine but ends in "Application not installed".
I also tried Roman's Java program to reinstall from "flash.zip" using recovery mode(have it on my other pc) which put back the other TMobile apps but not Audio Postcards. I've tried putting the .apk in the proper folder via root explorer and changed the permissions to match everything else. Each and every time I get what appears to be a normal install but then "Application not installed".
It's not that great of an app to be sure, but now it has me hooked on figuring out how to get it back. Since I don't see any other posts on this I'm assuming it's something I'm doing wrong. Like I said I've read other posts on how to install from an .apk and I've followed the information and have had success with everything but this app.
Anyone else have this issue or have any insight they can offer?
Thanks in advance for any help or direction....
What happened?
I had this same problem, and did everything to get it reinstalled and it still won't show up.
I have heard that you don't need to reinstall it, just put the .apk and .odex files in system/apps and make sure they have the right permission and user group assignments (root.root). I did that, and it still won't show up. Trying to install it gets the "not installed" message.
I tried to install it using adb, but I got the following error message:
./adb install /Android/AudioPostcard.apk
2125 KB/s (11202488 bytes in 5.147s)
pkg: /data/local/tmp/AudioPostcard.apk
Failure [INSTALL_FAILED_DEXOPT]
There are two reasons why I want to get this fixed: one, because when the next update appears I want to be able to install it, and it won't install (as we all know) without the bloatware. Secondly, I'm trying to learn more about the platform, and doing things like this teaches me how to use adb and increases my knowledge about how it all works.
I'll post this as a question as well, but I did it here to see if the other user had fixed this. Thanks.
Hello,
Here is the short story.
I have Samsung Galaxy ACE which is rooted.
Till y'day I was using CM9 Beta 8 ICS 4.0.4 and it was working well.
I installed CM10 JB for Galaxy Ace alpha1 from "hxxp://maclaw.pl/?page_id=180#comment-3642"
Now the problem is, JB doesn't have File Manager installed and I need to install TB to revert my backups.
Due to some unknown reason I am not able to access internet on my device either through GPRS or 3G connection.
I am desperately looking for a way to access my SDCARD wherein I have all my apk's which I can install however, without File Manager I am not sure how to install an apk.
I did some google search and came across topics about installing apk using Android SDK etc.. however I would not want to work on SDK as I feel its bit tedious job for me.
I also tried Android Injector however that didnt work even if I have enabled USB debugging Mode for adb + apps.
Now, I am hoping that, I can use the Terminal Emulator which is preinstalledo n my phone to install apk present on my sdcard.
However, I am not sure how to do that, It would be really appreciated if anyone can suggest the steps to install apk present on my sdcard from Terminal Emulator available on my phone.
Here are some of the screen captures
http://imageshack.us/photo/my-images/855/screenshot2012072418240.png/
http://imageshack.us/photo/my-images/52/screenshot2012072418234.png/
http://imageshack.us/photo/my-images/822/screenshot2012072418230.png/
Thanks
Never mind...
I managed to install Astro File Manager apk from Terminal Emulator.
For those who are interested, here is what I had done.
Previously, I wasn't able to browse sdcard contents from TE,
I rebooted my phone once, fired up TE again
~Android$ su
Allow root access for TE
~Android# cd sdcard
~Android# ls ( Contents of SD card are listed ) I had copied astrofm.apk on root of SDCARD
~Android# pm install astrofm.apk
Success !
Thanks
P.S. This thread can be closed.
@@
hsotnas said:
Never mind...
I managed to install Astro File Manager apk from Terminal Emulator.
For those who are interested, here is what I had done.
Previously, I wasn't able to browse sdcard contents from TE,
I rebooted my phone once, fired up TE again
~Android$ su
Allow root access for TE
~Android# cd sdcard
~Android# ls ( Contents of SD card are listed ) I had copied astrofm.apk on root of SDCARD
~Android# pm install astrofm.apk
Success !
Thanks
P.S. This thread can be closed.
Click to expand...
Click to collapse
Awesome guide !!!! , thanks bro !! :good::fingers-crossed:
Thank you for the guide
it works. thank you
works, thanks
hsotnas said:
Never mind...
I managed to install Astro File Manager apk from Terminal Emulator.
For those who are interested, here is what I had done.
Previously, I wasn't able to browse sdcard contents from TE,
I rebooted my phone once, fired up TE again
~Android$ su
Allow root access for TE
~Android# cd sdcard
~Android# ls ( Contents of SD card are listed ) I had copied astrofm.apk on root of SDCARD
~Android# pm install astrofm.apk
Success !
Thanks
P.S. This thread can be closed.
Click to expand...
Click to collapse
I very much appreciate the quick tutorial!
However, with that being said, I am having an issue trying to install my .apk onto my Motorola Xoom (Rooted running CM10.1) through the use of Terminal Emulator. I first tried installing the .apk from my File Manager and just clicking on the icon, and clicking Install, like one would think one should be able to do. When that method failed, multiple times(kept saying "insufficient storage, please delete files through app manager") which by the way, I know for a fact I have 15.8GB of storage left on my Xoom, so this should not be the issue. I then decided to try and install through Terminal Emulator. Now one would think it would be about the same as using adb commands on a Computer, which it somewhat is I guess you could say. So I go to T.E. and type the commands to get Super User access, then cd sdcard to go into the directory, then cd download because this is where my file is located, then I type pm install ****.apk.
I get a line of command that says: a) pkg: ****.apk and then b) Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE], and then the command line just goes back to my download folder directory.
I've had this issue before on my Galaxy S3, but can't remember how I ended up resolving the issue. Think I did a factory data reset/wipe, which I don't want to have to do to my Xoom. So any assistance would be much appreciated. I do understand that your device was a Galaxy ACE, but I wouldn't think it would matter as to what the device is, since it is the same install method/command for any Android device essentially. Hope someone can help out. If not, I may have to post in another Device Thread (Motorola Stingray Xoom I would assume).
Many thanks in advance, and I will click the Thank You, if any responses come through.
Really appreciate for the guide man
Sent from my LG-P700 using xda app-developers app
Thanks for the reply... short, to the point, and it works.
DannyShane said:
I very much appreciate the quick tutorial!
However, with that being said, I am having an issue trying to install my .apk onto my Motorola Xoom (Rooted running CM10.1) through the use of Terminal Emulator. I first tried installing the .apk from my File Manager and just clicking on the icon, and clicking Install, like one would think one should be able to do. When that method failed, multiple times(kept saying "insufficient storage, please delete files through app manager") which by the way, I know for a fact I have 15.8GB of storage left on my Xoom, so this should not be the issue. I then decided to try and install through Terminal Emulator. Now one would think it would be about the same as using adb commands on a Computer, which it somewhat is I guess you could say. So I go to T.E. and type the commands to get Super User access, then cd sdcard to go into the directory, then cd download because this is where my file is located, then I type pm install ****.apk.
I get a line of command that says: a) pkg: ****.apk and then b) Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE], and then the command line just goes back to my download folder directory.
I've had this issue before on my Galaxy S3, but can't remember how I ended up resolving the issue. Think I did a factory data reset/wipe, which I don't want to have to do to my Xoom. So any assistance would be much appreciated. I do understand that your device was a Galaxy ACE, but I wouldn't think it would matter as to what the device is, since it is the same install method/command for any Android device essentially. Hope someone can help out. If not, I may have to post in another Device Thread (Motorola Stingray Xoom I would assume).
Many thanks in advance, and I will click the Thank You, if any responses come through.
Click to expand...
Click to collapse
Hi DannyShane,
Not sure if this is still relevant and you are around here, since it's been a very long time and I stopped using Android
I am not an Android geek but here are my 2 cents...
You need to keep .apk file on the root of the SD CARD instead of a folder. IIRC, I had the same exact error which you had mentioned, I was trying to install .apk which was placed in a folder and it didnt work., then I had to move the .apk file to root and it worked flawlessly.
Extremely sorry for the very late response though. I use my secondary e-mail for this forum and missed replies on this thread.
@ All others who have replied, I am glad that, my little finding helped you guys.
Cheers :angel:
I have a few things to add to hsotnas answer. The insufficent space error seems to be a very generic error on android that can have various causes. Maybe there is something like this in the android source code:
PHP:
try{
installApk();
} catch (Exception ex){
output("Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]");
}
If you understand what I mean
I had this error myself a few days ago and for me it was caused by some left over files in the /data/app-lib directory. It was a self-developed application and I added a library to this directory manually. As I uninstalled the application, it wasn't removed and the reinstall failed with the above mentioned error. So make sure the directories /data/data/app.package.name/ and /data/app-lib/app.package.name/ are empty.
I tried this, to install the play store apk. But I get the error INSTALL_FAILED_INVALID_URI. What is this error refering to?
PSV_Supporter said:
I tried this, to install the play store apk. But I get the error INSTALL_FAILED_INVALID_URI. What is this error refering to?
Click to expand...
Click to collapse
Me too same thing happens when I try to install 3.apk
the command used is "pm install apps/*.apk"
Mine are backups of play store
Thankyou for this tutorial... IT WORKS.. Can't believe it.. You made my day. Thankyou :good:
I'm trying to recover an old tablet and need to install a file manager... the touch screen inst working so I thought terminal would do the job... but .APK's dont show when I go to the root of the SD card and type 'ls'
An ideas?
Thanks it works
failed on me ..
This thread has been deleted.
This thread has been deleted.
This thread has been deleted.
***** really really really reserved*****
Working w/ Root on a Mac (OSX Yosemite)
CONFIRMED: This works using AT&T (SM-R750A), OSX (Yosemite), VirtualBox and Windows XP. See this link for the driver setup I used on my Mac.
http://www.onebadkid.com/?p=6930
I also find that after factory reset, I still have root! Great job!
---
Also, I haven't been able to get the scripts to work in the virtual machine so I've just been "pushing" the files manually. I did open up the scripts to get the destinations for the various files, so thank you OP. Also, you have to have the Tizen Wearables SDK installed and then use SDB commands in the terminal.
Remember, when using SDB on a Mac, it's: ./sdb [command] (you have to use the "dot-slash")
./sdb devices (to show whether or not your device is connected)
./sdb root on
./sdb shell (puts you into the device's shell so you can navigate the device in a Darwin/Linux terminal)
./sdb push [/full path of the file you want to upload to the device] [/full path of the desination]
I usually open up three Darwin/Linux Terminals on my Mac. One to use to navigate my watch in shell, the other to run the ./sdb command (just like in Windows, you have to run SDB on the mac from within it's home location: "/Users/[you]/tizen-wearable-sdk/tools"), and a third to drop files into so I can quickly see their full file path/location.
"PWD" = print working directory so you can use that in the Darwin/Linux Terminal so you don't get lost.
I'm using Windows 8.1 (don't know if it matters) but after updating to this driver my PC no longer recognized my Gear S. Had to roll back to previous driver.
Ohhhhh!!!
ohh SO installing these and getting it ready for the rest
Edit: got rootfs.img odin'd in so now i wait lmao
Wondering
Good write up so far. I had already gotten root from the previous thread with horrible direcions. LoL After I got my replacement gear s (ALWAYS CHECK YOUR SIM COVER), I rooted it using the bad direction method again (luckily I already know how to do these things), but your directions are very clear cut and noob friendly. You're doing a huge favor to new comers who come looking to root their gear. Hopefully they don't brick them before they find this.
cipherswitch said:
Got any request for certain alarms, notification sounds or ringtones? Shoot me a PM and I will get through them as fast as I can and repost here.
No themes as of yet, but I will definitely be working on custom clock faces apart from everything else
Click to expand...
Click to collapse
Reset my gear to factory to try out your method.
Odin'd over the root img and all went well after a few reboots (dont' turn off destination, installing new configuration, final reboot).
Watch reboots, open a command prompt and type "sdb root on" (Switched to'root' account mode)
sdb shell whoami
root
sdb shell setup-folder.sh
-1: /bin/setup-folder.sh: Permission Denied
I went and checked your .bat file and it uses the same command. The device says I have root but it's read only file system. I have been trying every trick I know the past half hour; any thoughts?
Megaflop666 said:
Reset my gear to factory to try out your method.
Odin'd over the root img and all went well after a few reboots (dont' turn off destination, installing new configuration, final reboot).
Watch reboots, open a command prompt and type "sdb root on" (Switched to'root' account mode)
sdb shell whoami
root
sdb shell setup-folder.sh
-1: /bin/setup-folder.sh: Permission Denied
I went and checked your .bat file and it uses the same command. The device says I have root but it's read only file system. I have been trying every trick I know the past half hour; any thoughts?
Click to expand...
Click to collapse
Do this
sdb root on
sdb shell
chmod +x /bin/setup-folder.sh
./bin/setup-folder.sh
Megaflop666 said:
Reset my gear to factory to try out your method.
Odin'd over the root img and all went well after a few reboots (dont' turn off destination, installing new configuration, final reboot).
Watch reboots, open a command prompt and type "sdb root on" (Switched to'root' account mode)
sdb shell whoami
root
sdb shell setup-folder.sh
-1: /bin/setup-folder.sh: Permission Denied
I went and checked your .bat file and it uses the same command. The device says I have root but it's read only file system. I have been trying every trick I know the past half hour; any thoughts?
Click to expand...
Click to collapse
Color me embarrassed. It seems in the final uploads, I nabbed the rootfs file that wasn't done yet. Uploading the new file now,sorry for the delay.
I reset, flashed the wrong one to confirm the issue then flashed the correct rootfs and confirmed it working. That was the issue, Im waiting for the new one to upload to mediafire now.
and yeah, I couldnt type this morning, totally freaking out.
cipherswitch said:
Color me embarrassed. It seems in the final uploads, I nabbed the rootfs file that wasn't done yet. Uploading the new file now,sorry for the delay.
I reset, flashed the wrong one to confirm the issue then flashed the correct rootfs and confirmed it working. That was the issue, Im waiting for the new one to upload to mediafire now.
and yeah, I couldnt type this morning, totally freaking out.
Click to expand...
Click to collapse
Its all good, I decided to tear into some things and bricked the damn thing, so I am sitting here waiting (forever) for the original firmware to download so I can factory restore it. I was not even able to get into recovery, just download mode. LoL
Oh well, if flashing the original firmware doesn't fix it, i'll take it up to Tmo at 10am and get a new one.
new rootfs uploaded as of 12/17/14 8:42 am est, I also updated the link in the writeup.
::::::Just a quick dirty write-up of how to load sounds with your newly rooted Samsung Gear S::::::
Since most folks are rooting their Gear S for the ability of adding Ringtones (which can be done via a pay app) and adding Notifications, Wallpapers, Watch Faces, you get it......
Once you have followed the awesome rooting guide contained here and you want to load some stuff:
Path for Ringtones:
/opt/share/settings/Ringtones/
Path for Notifications:
/opt/share/settings/Alerts/
Path for Wallpapers:
/opt/share/settings/Wallpapers/
Path for Alarm Sounds:
/opt/share/settings/Alarms/
I have placed both mp3 and off files and they both work fine. Sometimes when setting your applicable Alert/Notification/Ringtone and the file is a mp3, the sound will not play, no worries, it will when the Alert/Notification/Ringtone is invoked.
To load files (Choose appropriate folder listed above)
sdb root on
sdb shell ls /opt/share/settings/Alerts/ (Shows directory listing for /opt/share/settings/Alerts/ on the Gear 2)
sdb push NAMEOFFILE /opt/share/settings/NOTIFICATION_TYPE_FOLDER (ie /Alerts or /Ringtones)
Megaflop666 said:
Its all good, I decided to tear into some things and bricked the damn thing, so I am sitting here waiting (forever) for the original firmware to download so I can factory restore it. I was not even able to get into recovery, just download mode. LoL
Oh well, if flashing the original firmware doesn't fix it, i'll take it up to Tmo at 10am and get a new one.
Click to expand...
Click to collapse
It is SO hard to brick this device so you will be fine! If you get into the firmware failed to install screen you're still good to go. Like I said, I got to bootloops and thought it was dead but stock fixed everything.
No worries you're fine!
You'll be fine!
You will be fine. I've been able to restore from this screen using stock.
Um actually..... its easier. Connect your gear, drop your content into the right folders (eg; ringtones, alerts and such) and run the update script. done and done.
ipstack said:
::::::Just a quick dirty write-up of how to load sounds with your newly rooted Samsung Gear S::::::
Since most folks are rooting their Gear S for the ability of adding Ringtones (which can be done via a pay app) and adding Notifications, Wallpapers, Watch Faces, you get it......
Once you have followed the awesome rooting guide contained here and you want to load some stuff:
Path for Ringtones:
/opt/share/settings/Ringtones/
Path for Notifications:
/opt/share/settings/Alerts/
Path for Wallpapers:
/opt/share/settings/Wallpapers/
Path for Alarm Sounds:
/opt/share/settings/Alarms/
I have placed both mp3 and off files and they both work fine. Sometimes when setting your applicable Alert/Notification/Ringtone and the file is a mp3, the sound will not play, no worries, it will when the Alert/Notification/Ringtone is invoked.
To load files (Choose appropriate folder listed above)
sdb root on
sdb shell ls /opt/share/settings/Alerts/ (Shows directory listing for /opt/share/settings/Alerts/ on the Gear 2)
sdb push NAMEOFFILE /opt/share/settings/NOTIFICATION_TYPE_FOLDER (ie /Alerts or /Ringtones)
Click to expand...
Click to collapse
sbrownla said:
It is SO hard to brick this device so you will be fine! If you get into the firmware failed to install screen you're still good to go. Like I said, I got to bootloops and thought it was dead but stock fixed everything.
No worries you're fine!
Click to expand...
Click to collapse
I wasn't worried to begin with. It's dead, stock firmware flash didn't even fix it. New one will be here tomorrow afternoon. It'll be my third one since I first bought it done my kids drowned the first one. Lmao
Megaflop666 said:
I wasn't worried to begin with. It's dead, stock firmware flash didn't even fix it. New one will be here tomorrow afternoon. It'll be my third one since I first bought it done my kids drowned the first one. Lmao
Click to expand...
Click to collapse
Hm ... what was it doing when you tried to flash?!
I was working on changing some permissions, rebooted it and it never came back, don't even have recovery. From what tmo said, this has happened to other people on this watch