MobileAP for US version - Vibrant Q&A, Help & Troubleshooting

Hey there.
Has anyone got the MobileAP.apk deoxed? and the jar?
I tried using a few deoxers + few java decompilers with no luck.
I think it would be a good addition.
This has been done by Jr33 Find it @ http://forum.xda-developers.com/showthread.php?t=756804

---

have you tried smali/baksmali?

---

jroid said:
have you tried smali/baksmali?
Click to expand...
Click to collapse
Yea, I tried baksmali in VM. and JD-GUI.
Here are the files.
If anyone has success.

---

Do you know what deodexing is? Because that file you attached is already deodexed

---

JesusFreke said:
Do you know what deodexing is? Because that file you attached is already deodexed
Click to expand...
Click to collapse
O please just one JF build please
Sent using xda app...

---

Of course i do. And i know its deoxed.
Im trying to see why it wont run. Looking for a hand. I want infastructure mode
Sent from my SGH-T959 using XDA App

---

rhcp0112345 said:
Of course i do. And i know its deoxed.
Im trying to see why it wont run. Looking for a hand. I want infastructure mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It wont run without all the libraries and binaries installed.
I'm trying to get it running, but its complaining about missing a shared lib that isnt in the source or on the phone (mobileap).
Still looking though...

---

JesusFreke said:
Do you know what deodexing is? Because that file you attached is already deodexed
Click to expand...
Click to collapse
are you serious.. definitely wasn't expecting to see JF in a vibrant forum

---

blackeyedbrian said:
It wont run without all the libraries and binaries installed.
I'm trying to get it running, but its complaining about missing a shared lib that isnt in the source or on the phone (mobileap).
Still looking though...
Click to expand...
Click to collapse
Which one are you seeing?
I have access to most of the firmwares and such. and i can deox the files and such.
Let me know. maybe you found somethng.

---

rhcp0112345 said:
Which one are you seeing?
I have access to most of the firmwares and such. and i can deox the files and such.
Let me know. maybe you found somethng.
Click to expand...
Click to collapse
I think I got past that point.
Here's what im doing :
All these files are from the i9000 dump
Code:
push these libraries to /system/lib (from /system/lib)
libwlp2p.so
libwlp2pclient.so
libwlp2penablejni.so
libwlp2pjni.so
libwlp2pservice.so
libwlwpscli.so
libwldhcp.so
push the service binary wlp2pservice to /system/bin/ (from /system/bin)
push initialize_nat.sh to /system/etc/ (from /system/etc)
The current problem is running
Code:
service mobileAP /system/bin/wlp2pservice
If i just run that binary, it gives me this
Code:
# wlp2pservice
wlp2pservice
WLP2PService::instantiate
WLP2PService created
WLP2PService destroyed
*****************
Previous dns 1 and 2
*****************
iptables: No chain/target/match by that name
iptables: Bad rule (does a matching rule exist in that chain?)
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
================= Shutting down p2papp ================
ideas?

---

blackeyedbrian said:
I think I got past that point.
Here's what im doing :
All these files are from the i9000 dump
Code:
push these libraries to /system/lib (from /system/lib)
libwlp2p.so
libwlp2pclient.so
libwlp2penablejni.so
libwlp2pjni.so
libwlp2pservice.so
libwlwpscli.so
libwldhcp.so
push the service binary wlp2pservice to /system/bin/ (from /system/bin)
push initialize_nat.sh to /system/etc/ (from /system/etc)
The current problem is running
Code:
service mobileAP /system/bin/wlp2pservice
If i just run that binary, it gives me this
Code:
# wlp2pservice
wlp2pservice
WLP2PService::instantiate
WLP2PService created
WLP2PService destroyed
*****************
Previous dns 1 and 2
*****************
iptables: No chain/target/match by that name
iptables: Bad rule (does a matching rule exist in that chain?)
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
================= Shutting down p2papp ================
ideas?
Click to expand...
Click to collapse
Wow damn dude. I think you are close++++++++++++++++
UMMM!!!!
Can you post a zip of all those files? also that binary from one of the dumps? or if you dont have.
Ill search. I think you may have it!

---

rhcp0112345 said:
Wow damn dude. I think you are close++++++++++++++++
UMMM!!!!
Can you post a zip of all those files? also that binary from one of the dumps? or if you dont have.
Ill search. I think you may have it!
Click to expand...
Click to collapse
http://www.megaupload.com/?d=L8STY6UW
There's on more lib file to push, libwlw.so
If you do all this, and then try to install the apk with adb, it will error out with INSTALL_FAILED_MISSING_SHARED_LIBRARY , so there's still quite a few pieces missing.

---

blackeyedbrian said:
http://www.megaupload.com/?d=L8STY6UW
There's on more lib file to push, libwlw.so
If you do all this, and then try to install the apk with adb, it will error out with INSTALL_FAILED_MISSING_SHARED_LIBRARY , so there's still quite a few pieces missing.
Click to expand...
Click to collapse
Very nice.
If you logcat during the install process? any errors?
I will try this soon. Works fine on the vibrant though? no brick? etc? Im asking since you tested it seems

---

rhcp0112345 said:
Very nice.
If you logcat during the install process? any errors?
I will try this soon. Works fine on the vibrant though? no brick? etc? Im asking since you tested it seems
Click to expand...
Click to collapse
No brick yet =)
logcat will only show anything when trying to install the apk, the other stuff is at a lower level.
Code:
08-10 16:27:48.492: ERROR/PackageManager(2305): Package com.sec.android.app.mobileap requires unavailable shared library mobileap; failing!
if there's another lib file for mobileap i dont see it.

---

blackeyedbrian said:
No brick yet =)
logcat will only show anything when trying to install the apk, the other stuff is at a lower level.
Code:
08-10 16:27:48.492: ERROR/PackageManager(2305): Package com.sec.android.app.mobileap requires unavailable shared library mobileap; failing!
if there's another lib file for mobileap i dont see it.
Click to expand...
Click to collapse
nice. I will be trying this soon. Lets see there must be something missing.
Ill have to compare the ones you pulled VS i9000.

---

rhcp0112345 said:
nice. I will be trying this soon. Lets see there must be something missing.
Ill have to compare the ones you pulled VS i9000.
Click to expand...
Click to collapse
What dump are you using? I only have the i9000 /system dump so i dont have /lib/modules etc

---

blackeyedbrian said:
I think I got past that point.
Here's what im doing :
All these files are from the i9000 dump
Code:
push these libraries to /system/lib (from /system/lib)
libwlp2p.so
libwlp2pclient.so
libwlp2penablejni.so
libwlp2pjni.so
libwlp2pservice.so
libwlwpscli.so
libwldhcp.so
push the service binary wlp2pservice to /system/bin/ (from /system/bin)
push initialize_nat.sh to /system/etc/ (from /system/etc)
The current problem is running
Code:
service mobileAP /system/bin/wlp2pservice
If i just run that binary, it gives me this
Code:
# wlp2pservice
wlp2pservice
WLP2PService::instantiate
WLP2PService created
WLP2PService destroyed
*****************
Previous dns 1 and 2
*****************
iptables: No chain/target/match by that name
iptables: Bad rule (does a matching rule exist in that chain?)
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:372
iptables: No chain/target/match by that name
================= Shutting down p2papp ================
ideas?
Click to expand...
Click to collapse
The issue here. Is. There is a iptable rule that is supposed to exist which doesnt.
You know anyone with a i9000 euro? who could do a iptables? and show a list?
we may be missing a script to make these. Ill look around the i9000 files.
Yea,
# Delete Previous MobileAP NAT Setting
# Step 1 : Masquerading
iptables -t nat -D POSTROUTING -o pdp0 -j MASQUERADE
iptables -t nat -D POSTROUTING -j ACCEPT
# DNS Setting
iptables -t nat -D PREROUTING -i wl0.1 -p tcp --dport 53 -j DNAT --to $bakdns1:53
iptables -t nat -D PREROUTING -i wl0.1 -p udp --dport 53 -j DNAT --to $bakdns1:53
iptables -t nat -D PREROUTING -i wl0.1 -p tcp --dport 53 -j DNAT --to $bakdns2:53
iptables -t nat -D PREROUTING -i wl0.1 -p udp --dport 53 -j DNAT --to $bakdns2:53
Did you try making those two?
using iptables?
iptables -N POSTROUTING
iptables -N PREROUTING
Then run it again?

---

rhcp0112345 said:
The issue here. Is. There is a iptable rule that is supposed to exist which doesnt.
You know anyone with a i9000 euro? who could do a iptables? and show a list?
we may be missing a script to make these. Ill look around the i9000 files.
Yea,
# Delete Previous MobileAP NAT Setting
# Step 1 : Masquerading
iptables -t nat -D POSTROUTING -o pdp0 -j MASQUERADE
iptables -t nat -D POSTROUTING -j ACCEPT
# DNS Setting
iptables -t nat -D PREROUTING -i wl0.1 -p tcp --dport 53 -j DNAT --to $bakdns1:53
iptables -t nat -D PREROUTING -i wl0.1 -p udp --dport 53 -j DNAT --to $bakdns1:53
iptables -t nat -D PREROUTING -i wl0.1 -p tcp --dport 53 -j DNAT --to $bakdns2:53
iptables -t nat -D PREROUTING -i wl0.1 -p udp --dport 53 -j DNAT --to $bakdns2:53
Did you try making those two?
using iptables?
iptables -N POSTROUTING
iptables -N PREROUTING
Then run it again?
Click to expand...
Click to collapse
That doesnt change anything, but there is another file: /system/etc/enable_pdp.sh . When I ran that, the output of wlp2pservice changed to show the previous dns1 and dns2. but the other errors are the same.
That file is here http://www.megaupload.com/?d=3O60KNPB

---

blackeyedbrian said:
That doesnt change anything, but there is another file: /system/etc/enable_pdp.sh . When I ran that, the output of wlp2pservice changed to show the previous dns1 and dns2. but the other errors are the same.
That file is here http://www.megaupload.com/?d=3O60KNPB
Click to expand...
Click to collapse
Try running those two commands i told you for iptables.
then running this sh file.
it should kill errors.
Because that SH. Just deletes the data in the chains then repopulates.
Thats the script i was looking for
It should return with no errors.
after you make those two chains -> run this script.
then run the other .sh.

---

No, no change