Hi all,
I got problem with internet connection on my HD2 (ROM 1.48). There are 2 ways I connect to the internet - WIFI and GPRS. GPRS connection works fine - I can download and read e-mails, make backups with MyPhone, update weather information, etc. But when I connect to the internet with WIFI, there are only 2 things I can do. I can browse web pages with Opera and update Twitter messages. But I can´t download e-mails, make backups, update weather information, etc. When I try to update or backup something, there is connection error (through that connection between phone and router is fine and web pages are running).
It seems to me like most of applications want to connect to internet via GPRS only. Is there any way to set up (or check) the phone to connect to the internet via WIFI when it is turned on?
Thanks for any advice
Sorry cant help but agree - it would be fantastic if there was some way of knowing / controlling when it used GPRS data and when it uses wifi. When wifi availabe obviously would rather use that than be charge a small firtune for data.
Any one out there about to help with this??
Internet browsing
Ditto. I can - after HUGE effort - connect WiFi but I cannot browse the internet using either Opera or IE. 2 year old Nokia connected and browsed literally within 2 secs! Also, the phone keeps connecting via GPRS all the time even with data connections off. Can anyone help? Thanks PS I know it's unproductive & forgive me, but I have to get this off my chest: this is the worst cellphone I've ever owned. Bluetooth doesn't work, internet doesn't work, handsfree car kit doesn't work. Does anything work?
kakphone said:
Ditto. I can - after HUGE effort - connect WiFi but I cannot browse the internet using either Opera or IE. 2 year old Nokia connected and browsed literally within 2 secs! Also, the phone keeps connecting via GPRS all the time even with data connections off. Can anyone help? Thanks PS I know it's unproductive & forgive me, but I have to get this off my chest: this is the worst cellphone I've ever owned. Bluetooth doesn't work, internet doesn't work, handsfree car kit doesn't work. Does anything work?
Click to expand...
Click to collapse
correction, YOUR Bluetooth doesn't work, YOUR internet doesn't work, YOUR handsfree car kit doesn't work.
Get it exchanged. (if they genuinely dont work)
@others, go to settings menu all settings connection connections advanced select networks.
there are two dropdowns, in teh top one should be the name of your mobile data, , this is what automatic progs will use to connect to the web, in teh bottom one it should be 'the internet' (or sometimes 'my work network'), meaning they use wifi if available, and data if not.
(At least thats how they should work....)
If you set the top one the same as teh bottom one, nothing should try to use mobile unless wifi is not connected.
Could be a proxy problem? some operators set up a proxy, which can screw with connections.
samsamuel: Thank you for your advice. I´ve tried it - in both dropdowns I got "my work network", but no success.
I´ve found something interessting. When I turn on YouTube client (using WIFI), I can´t play videos. That should be ok when I got problem with internet connection. But YouTube client shows on the welcome screen preview of today´s added videos. So the question is why should application download preview of video, but it can´t play the video? I´m a little bit confused
Thanks for the suggestion, but I had tried that already and it did not work. I don't think it is just my cellphone. There are many comments re the HD2 that make it clear that it does not work with a Parrot handsfree carkit, Motorola S9 headset etc, and the 2 earlier posts reveal problems using WiFi too. It seems to be problematic on many fronts. I cannot even connect it using Windows Mobile via an USB port! And while I appreciate all suggestions it seems to me that this model is a (very expensive) lemon and frustrates huge numbers of owners. I find it odd that a 2 year old Nokia N95 can connect and browse instantly and a 'smart phone' doesn't work at all. I find it to be very gimmicky. I don't need twitter, facebook etc. I need voice dial, good PC software (like Ovi and PC suite) and bluetooth that works etc. The HD2 has none of this, but great graphics of a windscreen wiper, exactly the sort of pointless gimmick that reveals that the designers were interested in making a toy and not a useful phone.
I suggest you try and install "HTC_Wi-Fi_onDemand_by_Krocher". This program will always use wifi when available and stop the GPRS from connecting and will also keep your wifi on a stand-by. Please do read through the thread as you have to make sure that no programs using wifi are activated when you want it to be off. For me it solved several problems with wifi.
Second thought is to upgrade to one of the much more stable and already tweaked OS's. There are quite a lot out and you'll find everything about that on this forum as well.
Last thought, if it does not work it must be something to do with either the settings or the OS version as for others it works absolutely fine. These are complicated phones that, much like computers, must be set and tweaked to the correct settings in order to get the best out of them. If you just want a "buy and run" phone this is not the one.
Success,
Itamar
Related
Every month I have paid much money for phone and internet fee(9800 yen). I want to disable internet connection because it is not necessary for me.
thanks in advance
you can create a new internet connection and replace the default with it.
thanks for reply but how to make new connection.
Hello. What do you mean? You mean I can use it for a non-softbank account? (via 3g?) Of course, I suppose we could just delete the whole softbank account, and therefore it would not be able to "connect" via 3G, and we could connect via a wireless account, but then softbank mail would not work, right? I wonder if it is possible to just disable connecting to the internet via explorer.... any ideas?
@taicyber: i ran into a similar problem. sometimes while in my carrying case, my keitai would connect to the internet via internet explorer, and my monthly fee for internet usage was much higher than it should have been. so i took a couple steps. first, i changed the internet button on the front of the phone to a different function (that's apparently the button that often gets accidentally pressed). after that, i changed pie's (pocket internet explorer's) start page to a local file (ie. the help file). that step solved the majority of my problems. what was happening when it auto-connected was that yahoo.co.jp was the start page, and that page has HUNDREDS of little pics and ads that refresh every few minutes and drive those packet amounts up. if you make it a local file you'll no longer have those mystery packets being sent. and it doesn't affect your mms/sms in any way. having the dummy file as a start page made it safe for me to change the pie button back to it's default function of opening up pie.
also, just for reference, i don't think you have to worry about the phone being connected to the 3g network too much. unless a page that refreshes itself frequently is opened, then no data is sent. the only problem i run into with 3g being connected is that it kills my battery faster.
thanks shunsai. I have experience like you said. and I also changed the button and defalult.html(in /windows).But I am not sure if my phone will connect internet via other way.
Hey it might not be super helpful in this case, but for me I disable gprs using a piece of software called 'NoData'. it will let you quickly switch on / off data connections. Search the forums for NoData and you'll find links to it.
The issue sounds specific to Softbank the carrier though so YMMV.
Hi - question for anybody who might know
I have had the HTC X7510 for about 3-4 weeks and I LOVE IT! I am using it on ATT Wireless in the Saint Louis, MO area. We have great HSDPA signal here and it rocks. But, I am having some issues I can't seem to work out. When I am connected to Media Net (I have an unlimited plan) I can for example browse the internet in Opera or connect to my exchange server at work (for email, calendars, etc...), and even google maps. But for some reason I can't seem to get some programs to recognize the connection. Just a couple as an example:
The weather app that came as part of the home screen and Skype.
Both of these work perfectly when I am connected to a WiFi network - they connect perfectly and I can make calls or download the latest weather data.
If anybody has any ideas or has more questions please let me know and thanks again for your help!
Thanks!
Caleb
most likely the PORTs required, are not open in your Cell company, they can block those ports if they are mean, to force you buy their service, to do the same thing
it happens a lot here
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
Has anyone been able to successfully connect DUN over BT using wmodem? I have installed the addon cab and can find the DUN connection when pairing my phone with my laptop, but when I go to connect it gives me a 678 error. I have no problems connecting wmodem over USB or using "Internet Sharing" to connect cover BT and USB.
dun
Had issue with wmodem but Internet Sharing that was on my custom rom works like a champ. I'm pulling 1.0 to 1.2 Mbps almost all the time. I can't remember if it was on my stock rom, but if not, I'm sure it's available somewhere on here.
Nate
i was just about to do a search on this. then i scrolled down the list and found this post. I'm very interested in getting BT DUN working on my Mac, since you can't use USB.
If you find an internet sharing cab, can you post here?
Thanks.
yeah i do not mean to hijack your thread but when i try to tether via bluetooth to my new macbook with internet sharing, the internet connection crawls!! i mean CRAWLS!!! lol
I have BT and USB connection with a windows laptop and it runs perfect. any ideas on how to speed up the connection?
Thanks!
http://www.wmwifirouter.com
this is really the best solution if you want to connect to a Mac. Works perfect and is worth the money! Hella fast too when connecting through WiFi. But you have the option to connect through WiFi, Bluetooth & USB.
When I connect through WiFi, I'm getting 1.2mb down and 500kb up.
It worked great for a while about a month or 2 ago when I bought it. But then I was playing with the Mac network settings and stuff and managed to jack it up. But here's what I was doing wrong:
Connecting through WiFi, there is open & wep. I chose wep. So on WiFiRouter you select your wep password. I chose a simple word, let's say "keyboard". On the Mac when you select to connect wep, using keyboard for the password won't work. You need to enter the 20 digit hex value that WiFiRouter gives you after you put in the password "keyboard".
Hope this helps anyone who might have problems setting it up. I didn't change any settings on WiFiRouter. Works right out of the box. You just have to make sure you set it up correctly on the Mac.
I use ICS over Bluetooth all the time. works great.
I now have ICS. Unlocked my HTC Touch Pro and used Scott Scrosler's ROM. But I'll most likely use WiFiRouter since it's about 3-4X faster going through WiFi. Need the speed for VPN.
I have an HTC Touch Pro and an asus eee pc and have tried and searched everywhere to figure out how to bluetooth pair these two, but I've had no luck. I can USB pair just fine with Internet Sharing. Has anyone had success with this? I'd rather go the free route than spend the $ for wmwifirouter, if possible. TIA
Well on W7 at least all I have to do is select Bluetooth as my connection option in ICS and then right click on my phone in the Bluetooth Devices window on my PC and go to where it says "Join PAN" and it connects faster than it would by USB. The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting. But GRemote works from like 25 feet away.
Internet Sharing NO Registry Edit Needed
Hi. For those with ATT FUZE Stock Rom
I got this CAB (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire, just install the CAB and it will enable Internet Sharing, and NO registry edit needed.
As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.
Enjoy.
hidavi said:
The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting.
Click to expand...
Click to collapse
I'm facing a lot of disconnects using Bluetooth PAN, however over USB works great! If I have to use the cell phone near the computer, I'd rather use the cable.
I only wanted to use bluetooth because I could put the cell phone near the window which is where I have better signal when I'm on the mountains with GPRS-only..
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.